The problem is these lines:
ret = vref_uv = regulator_get_voltage(adc->vref);
if (ret < 0)
The "ret" variable is type long and "vref_uv" is u32 so that means
the condition can never be true on a 64bit system. A negative error
code from regulator_get_voltage() would be cast to a high positive
u32 value and then remain a high positive value when cast to a long.
The "ret" variable only ever stores ints so it should be declared as
an int. We can delete the "vref_uv" variable and use "ret" directly.
Fixes: 7d02296ac8b8 ("iio: adc: add imx93 adc support")
Signed-off-by: Dan Carpenter <error27@xxxxxxxxx>
---
drivers/iio/adc/imx93_adc.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/iio/adc/imx93_adc.c b/drivers/iio/adc/imx93_adc.c
index d8de8284e13d..8c68f0cd48f2 100644
--- a/drivers/iio/adc/imx93_adc.c
+++ b/drivers/iio/adc/imx93_adc.c
@@ -236,8 +236,7 @@ static int imx93_adc_read_raw(struct iio_dev *indio_dev,
{
struct imx93_adc *adc = iio_priv(indio_dev);
struct device *dev = adc->dev;
- long ret;
- u32 vref_uv;
+ int ret;
switch (mask) {
case IIO_CHAN_INFO_RAW:
@@ -253,10 +252,10 @@ static int imx93_adc_read_raw(struct iio_dev *indio_dev,
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
- ret = vref_uv = regulator_get_voltage(adc->vref);
+ ret = regulator_get_voltage(adc->vref);
if (ret < 0)
return ret;
- *val = vref_uv / 1000;
+ *val = ret / 1000;
*val2 = 12;
return IIO_VAL_FRACTIONAL_LOG2;
--
2.35.1
