From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> There has been a driver in staging for quite a while. Given we are now moving it to the main tree, time to make sure it has binding documentation. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> --- .../bindings/iio/accel/adi,adis16203.yaml | 59 +++++++++++++++++++ 1 file changed, 59 insertions(+) diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16203.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16203.yaml new file mode 100644 index 000000000000..05c095247e10 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16203.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/adi,adis16203.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADIS16203 Programmable 360 degree inclinometer + +maintainers: + - Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> + +properties: + compatible: + const: adi,adis16203 + + reg: + maxItems: 1 + + interrupts: + maxItems: 2 + + interrupt-names: + description: + Device has two configurable outputs, both of which may be used + as interrupt sources. + enum: + - dio0 + - dio1 + + reset-gpios: true + + vdd-supply: true + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + accelerometer@0 { + compatible = "adi,adis16201"; + reg = <0>; + spi-max-frequency = <2500000>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dio0"; + }; + }; +... + -- 2.39.1
