[PATCH v2 4/5] dt-bindings: iio: use lowercase hex in examples

[Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>]

Use lowercase hex in addresses in examples.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
---
 .../devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml     | 2 +-
 .../devicetree/bindings/iio/adc/samsung,exynos-adc.yaml     | 2 +-
 Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml   | 2 +-
 .../devicetree/bindings/iio/potentiometer/adi,ad5272.yaml   | 2 +-
 .../devicetree/bindings/iio/temperature/adi,ltc2983.yaml    | 6 +++---
 5 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml
index 714e48e613de..6ddb03f61bd9 100644
--- a/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml
@@ -44,7 +44,7 @@ examples:
 
         accel@f {
             compatible = "kionix,kxtf9";
-            reg = <0x0F>;
+            reg = <0xf>;
             mount-matrix = "0", "1", "0",
                            "1", "0", "0",
                            "0", "0", "1";
diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
index e27d094cfa05..dca6cfe1e88e 100644
--- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
@@ -150,7 +150,7 @@ examples:
 
     adc@126c0000 {
         compatible = "samsung,exynos3250-adc";
-        reg = <0x126C0000 0x100>;
+        reg = <0x126c0000 0x100>;
         interrupts = <0 137 0>;
         #io-channel-cells = <1>;
 
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml
index 88298bc43b81..79da0323c327 100644
--- a/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml
@@ -46,7 +46,7 @@ examples:
 
         dac@4c {
             compatible = "ti,dac5571";
-            reg = <0x4C>;
+            reg = <0x4c>;
             vref-supply = <&vdd_supply>;
         };
     };
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/adi,ad5272.yaml b/Documentation/devicetree/bindings/iio/potentiometer/adi,ad5272.yaml
index 0ebb6725a1af..b8d7083c97f8 100644
--- a/Documentation/devicetree/bindings/iio/potentiometer/adi,ad5272.yaml
+++ b/Documentation/devicetree/bindings/iio/potentiometer/adi,ad5272.yaml
@@ -44,7 +44,7 @@ examples:
 
         potentiometer@2f {
             compatible = "adi,ad5272-020";
-            reg = <0x2F>;
+            reg = <0x2f>;
             reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
         };
     };
diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
index b69813f281da..3e5b7b47bcdc 100644
--- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
@@ -519,9 +519,9 @@ examples:
                         reg = <12>;
                         adi,sensor-type = <26>; //Steinhart
                         adi,rsense-handle = <&rsense2>;
-                        adi,custom-steinhart = <0x00F371EC 0x12345678
-                                        0x2C0F8733 0x10018C66 0xA0FEACCD
-                                        0x90021D99>; //6 entries
+                        adi,custom-steinhart = <0x00f371ec 0x12345678
+                                        0x2c0f8733 0x10018c66 0xa0feaccd
+                                        0x90021d99>; //6 entries
                 };
 
                 thermocouple@20 {
-- 
2.34.1