Add support for the PMI632 PMIC in the spmi-gpio & qcom-lpg driver, add
the dtsi for the PMIC and enable the notification LED on fairphone-fp3.
Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
---
Luca Weiss (8):
dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632
pinctrl: qcom: spmi-gpio: Add PMI632 support
dt-bindings: leds: qcom-lpg: Add compatible for PMI632 LPG block
leds: qcom-lpg: Add support for PMI632 LPG
dt-bindings: iio: adc: qcom,spmi-vadc: Allow 1/16 for pre-scaling
dt-bindings: mfd: qcom-spmi-pmic: Add PMI632 compatible
arm64: dts: qcom: Add PMI632 PMIC
arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED
.../bindings/iio/adc/qcom,spmi-vadc.yaml | 2 +-
.../devicetree/bindings/leds/leds-qcom-lpg.yaml | 1 +
.../devicetree/bindings/mfd/qcom,spmi-pmic.yaml | 1 +
.../bindings/pinctrl/qcom,pmic-gpio.yaml | 2 +
arch/arm64/boot/dts/qcom/pmi632.dtsi | 165 +++++++++++++++++++++
arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts | 29 ++++
drivers/leds/rgb/leds-qcom-lpg.c | 15 ++
drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 1 +
8 files changed, 215 insertions(+), 1 deletion(-)
---
base-commit: c83fb1e4acf528c29b0729525cf23544f8121b3d
change-id: 20230414-pmi632-4ae03225ae75
Best regards,
--
Luca Weiss <luca@xxxxxxxxx>
