As stated in the commit 2d5cab9232ba ("arm64: dts: qcom: sc8280xp-pmics:
Specify interrupt parent explicitly"), we should not use bare interrupts
for our PMIC devices. Instead interrupts-extended should be used. Change
pmk8350.dtsi to use interrupts-extended propery.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/pmk8350.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
index f26ff3daf119..87b8e4269c60 100644
--- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
@@ -33,14 +33,14 @@ LABEL(pon): pon@1300 {
LABEL(pon_pwrkey): pwrkey {
compatible = "qcom,pmk8350-pwrkey";
- interrupts = <PMIC_SID 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
+ interrupts-extended = <&spmi_bus PMIC_SID 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
linux,code = <KEY_POWER>;
status = "disabled";
};
LABEL(pon_resin): resin {
compatible = "qcom,pmk8350-resin";
- interrupts = <PMIC_SID 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
+ interrupts-extended = <&spmi_bus PMIC_SID 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
status = "disabled";
};
};
@@ -50,14 +50,14 @@ LABEL(vadc): adc@3100 {
reg = <0x3100>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <PMIC_SID 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+ interrupts-extended = <&spmi_bus PMIC_SID 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
#io-channel-cells = <1>;
};
LABEL(adc_tm): adc-tm@3400 {
compatible = "qcom,adc-tm7";
reg = <0x3400>;
- interrupts = <PMIC_SID 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+ interrupts-extended = <&spmi_bus PMIC_SID 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
#thermal-sensor-cells = <1>;
@@ -68,7 +68,7 @@ LABEL(rtc): rtc@6100 {
compatible = "qcom,pmk8350-rtc";
reg = <0x6100>, <0x6200>;
reg-names = "rtc", "alarm";
- interrupts = <PMIC_SID 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
+ interrupts-extended = <&spmi_bus PMIC_SID 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
--
2.30.2
