Re: [PATCH] staging: iio: ad2s1210: Switch to the gpio descriptor interface

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Oct 21, 2018 at 10:31:38AM +0200, Slawomir Stepien wrote:
> On paź 21, 2018 11:49, Nishad Kamdar wrote:
> > Use the gpiod interface instead of the deprecated old non-descriptor
> > interface.
> 
> Hi!
> 
> See my comments below.
> 
> > Signed-off-by: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
> > ---
> >  drivers/staging/iio/resolver/ad2s1210.c | 110 +++++++++++++++---------
> >  drivers/staging/iio/resolver/ad2s1210.h |   3 -
> >  2 files changed, 71 insertions(+), 42 deletions(-)
> > 
> > diff --git a/drivers/staging/iio/resolver/ad2s1210.c b/drivers/staging/iio/resolver/ad2s1210.c
> > index ac13b99bd9cb..ed372a5f9130 100644
> > --- a/drivers/staging/iio/resolver/ad2s1210.c
> > +++ b/drivers/staging/iio/resolver/ad2s1210.c
> > @@ -15,7 +15,7 @@
> >  #include <linux/slab.h>
> >  #include <linux/sysfs.h>
> >  #include <linux/delay.h>
> > -#include <linux/gpio.h>
> > +#include <linux/gpio/consumer.h>
> >  #include <linux/module.h>
> >  
> >  #include <linux/iio/iio.h>
> > @@ -73,6 +73,11 @@ struct ad2s1210_state {
> >  	const struct ad2s1210_platform_data *pdata;
> >  	struct mutex lock;
> >  	struct spi_device *sdev;
> > +	struct gpio_desc *sample;
> > +	struct gpio_desc *a0;
> > +	struct gpio_desc *a1;
> > +	struct gpio_desc *res0;
> > +	struct gpio_desc *res1;
> >  	unsigned int fclkin;
> >  	unsigned int fexcit;
> >  	bool hysteresis;
> > @@ -91,8 +96,8 @@ static const int ad2s1210_mode_vals[4][2] = {
> >  static inline void ad2s1210_set_mode(enum ad2s1210_mode mode,
> >  				     struct ad2s1210_state *st)
> >  {
> > -	gpio_set_value(st->pdata->a[0], ad2s1210_mode_vals[mode][0]);
> > -	gpio_set_value(st->pdata->a[1], ad2s1210_mode_vals[mode][1]);
> > +	gpiod_set_value(st->a0, ad2s1210_mode_vals[mode][0]);
> > +	gpiod_set_value(st->a1, ad2s1210_mode_vals[mode][1]);
> >  	st->mode = mode;
> >  }
> >  
> > @@ -152,8 +157,8 @@ int ad2s1210_update_frequency_control_word(struct ad2s1210_state *st)
> >  
> >  static unsigned char ad2s1210_read_resolution_pin(struct ad2s1210_state *st)
> >  {
> > -	int resolution = (gpio_get_value(st->pdata->res[0]) << 1) |
> > -			  gpio_get_value(st->pdata->res[1]);
> > +	int resolution = (gpiod_get_value(st->res0) << 1) |
> > +			  gpiod_get_value(st->res1);
> >  
> >  	return ad2s1210_resolution_value[resolution];
> >  }
> > @@ -164,10 +169,10 @@ static const int ad2s1210_res_pins[4][2] = {
> >  
> >  static inline void ad2s1210_set_resolution_pin(struct ad2s1210_state *st)
> >  {
> > -	gpio_set_value(st->pdata->res[0],
> > -		       ad2s1210_res_pins[(st->resolution - 10) / 2][0]);
> > -	gpio_set_value(st->pdata->res[1],
> > -		       ad2s1210_res_pins[(st->resolution - 10) / 2][1]);
> > +	gpiod_set_value(st->res0,
> > +			ad2s1210_res_pins[(st->resolution - 10) / 2][0]);
> > +	gpiod_set_value(st->res1,
> > +			ad2s1210_res_pins[(st->resolution - 10) / 2][1]);
> >  }
> >  
> >  static inline int ad2s1210_soft_reset(struct ad2s1210_state *st)
> > @@ -401,15 +406,15 @@ static ssize_t ad2s1210_clear_fault(struct device *dev,
> >  	int ret;
> >  
> >  	mutex_lock(&st->lock);
> > -	gpio_set_value(st->pdata->sample, 0);
> > +	gpiod_set_value(st->sample, 0);
> >  	/* delay (2 * tck + 20) nano seconds */
> >  	udelay(1);
> > -	gpio_set_value(st->pdata->sample, 1);
> > +	gpiod_set_value(st->sample, 1);
> >  	ret = ad2s1210_config_read(st, AD2S1210_REG_FAULT);
> >  	if (ret < 0)
> >  		goto error_ret;
> > -	gpio_set_value(st->pdata->sample, 0);
> > -	gpio_set_value(st->pdata->sample, 1);
> > +	gpiod_set_value(st->sample, 0);
> > +	gpiod_set_value(st->sample, 1);
> >  error_ret:
> >  	mutex_unlock(&st->lock);
> >  
> > @@ -466,7 +471,7 @@ static int ad2s1210_read_raw(struct iio_dev *indio_dev,
> >  	s16 vel;
> >  
> >  	mutex_lock(&st->lock);
> > -	gpio_set_value(st->pdata->sample, 0);
> > +	gpiod_set_value(st->sample, 0);
> >  	/* delay (6 * tck + 20) nano seconds */
> >  	udelay(1);
> >  
> > @@ -512,7 +517,7 @@ static int ad2s1210_read_raw(struct iio_dev *indio_dev,
> >  	}
> >  
> >  error_ret:
> > -	gpio_set_value(st->pdata->sample, 1);
> > +	gpiod_set_value(st->sample, 1);
> >  	/* delay (2 * tck + 20) nano seconds */
> >  	udelay(1);
> >  	mutex_unlock(&st->lock);
> > @@ -628,32 +633,59 @@ static const struct iio_info ad2s1210_info = {
> >  	.attrs = &ad2s1210_attribute_group,
> >  };
> >  
> > -static int ad2s1210_setup_gpios(struct ad2s1210_state *st)
> > +static int ad2s1210_setup_gpios(struct spi_device *spi,
> > +				struct ad2s1210_state *st)
> 
> This change is not needed. The st has the spi_device inside. Use container_of()
> macro here.
> 
> >  {
> > -	unsigned long flags = st->pdata->gpioin ? GPIOF_DIR_IN : GPIOF_DIR_OUT;
> > -	struct gpio ad2s1210_gpios[] = {
> > -		{ st->pdata->sample, GPIOF_DIR_IN, "sample" },
> > -		{ st->pdata->a[0], flags, "a0" },
> > -		{ st->pdata->a[1], flags, "a1" },
> > -		{ st->pdata->res[0], flags, "res0" },
> > -		{ st->pdata->res[0], flags, "res1" },
> > -	};
> > +	int ret = 0;
> > +	unsigned long flags = st->pdata->gpioin ? GPIOD_IN : GPIOD_OUT_LOW;
> > +
> > +	st->sample = devm_gpiod_get(&spi->dev, "sample", GPIOD_IN);
> > +	if (IS_ERR(st->sample)) {
> > +		ret = PTR_ERR(st->sample);
> > +		dev_err(&spi->dev, "Failed to request sample GPIO: %d\n",
> > +			ret);
> > +		return ret;
> > +	}
> > +	st->a0 = devm_gpiod_get(&spi->dev, "a0", flags);
> > +	if (IS_ERR(st->a0)) {
> > +		ret = PTR_ERR(st->a0);
> > +		dev_err(&spi->dev, "Failed to request a0 GPIO: %d\n",
> > +			ret);
> > +		return ret;
> > +	}
> > +	st->a1 = devm_gpiod_get(&spi->dev, "a1", flags);
> > +	if (IS_ERR(st->a1)) {
> > +		ret = PTR_ERR(st->a1);
> > +		dev_err(&spi->dev, "Failed to request a1 GPIO: %d\n",
> > +			ret);
> > +		return ret;
> > +	}
> > +	st->res0 = devm_gpiod_get(&spi->dev, "res0", flags);
> > +	if (IS_ERR(st->res0)) {
> > +		ret = PTR_ERR(st->res0);
> > +		dev_err(&spi->dev, "Failed to request res0 GPIO: %d\n",
> > +			ret);
> > +		return ret;
> > +	}
> > +	st->res1 = devm_gpiod_get(&spi->dev, "res1", flags);
> > +	if (IS_ERR(st->res1)) {
> > +		ret = PTR_ERR(st->res1);
> > +		dev_err(&spi->dev, "Failed to request res1 GPIO: %d\n",
> > +			ret);
> > +		return ret;
> > +	}
> 
> To reduce the redundant code here, create an array of structs. The struct will
> have a pointer to gpio_desc, name of the gpio and the gpios' flags. Then you can
> use for loop to get all the needed gpios:
> 
> for (l = 0; l < ARRAY_SIZE(str); l++) {
> 	str[l].ptr = devm_gpiod_get(&spi->dev, str[l].name, str[l].flags);
> 	if (IS_ERR(str[l].res1)) {
> 		...
> 	}
> }
> 
> > -	return gpio_request_array(ad2s1210_gpios, ARRAY_SIZE(ad2s1210_gpios));
> > +	return ret;
> >  }
> >  
> > -static void ad2s1210_free_gpios(struct ad2s1210_state *st)
> > +static void ad2s1210_free_gpios(struct spi_device *spi,
> > +				struct ad2s1210_state *st)
> >  {
> > -	unsigned long flags = st->pdata->gpioin ? GPIOF_DIR_IN : GPIOF_DIR_OUT;
> > -	struct gpio ad2s1210_gpios[] = {
> > -		{ st->pdata->sample, GPIOF_DIR_IN, "sample" },
> > -		{ st->pdata->a[0], flags, "a0" },
> > -		{ st->pdata->a[1], flags, "a1" },
> > -		{ st->pdata->res[0], flags, "res0" },
> > -		{ st->pdata->res[0], flags, "res1" },
> > -	};
> > -
> > -	gpio_free_array(ad2s1210_gpios, ARRAY_SIZE(ad2s1210_gpios));
> > +	devm_gpiod_put(&spi->dev, st->sample);
> > +	devm_gpiod_put(&spi->dev, st->a0);
> > +	devm_gpiod_put(&spi->dev, st->a1);
> > +	devm_gpiod_put(&spi->dev, st->res0);
> > +	devm_gpiod_put(&spi->dev, st->res1);
> >  }
> 
> This whole function ad2s1210_free_gpios is not needed anymore because you are
> using the devm API (it's called from probe and remove, so you are safe).
> 
> >  static int ad2s1210_probe(struct spi_device *spi)
> > @@ -670,7 +702,7 @@ static int ad2s1210_probe(struct spi_device *spi)
> >  		return -ENOMEM;
> >  	st = iio_priv(indio_dev);
> >  	st->pdata = spi->dev.platform_data;
> > -	ret = ad2s1210_setup_gpios(st);
> > +	ret = ad2s1210_setup_gpios(spi, st);
> >  	if (ret < 0)
> >  		return ret;
> >  
> > @@ -702,7 +734,7 @@ static int ad2s1210_probe(struct spi_device *spi)
> >  	return 0;
> >  
> >  error_free_gpios:
> > -	ad2s1210_free_gpios(st);
> > +	ad2s1210_free_gpios(spi, st);
> >  	return ret;
> >  }
> >  
> > @@ -711,7 +743,7 @@ static int ad2s1210_remove(struct spi_device *spi)
> >  	struct iio_dev *indio_dev = spi_get_drvdata(spi);
> >  
> >  	iio_device_unregister(indio_dev);
> > -	ad2s1210_free_gpios(iio_priv(indio_dev));
> > +	ad2s1210_free_gpios(spi, iio_priv(indio_dev));
> >  
> >  	return 0;
> >  }
> > diff --git a/drivers/staging/iio/resolver/ad2s1210.h b/drivers/staging/iio/resolver/ad2s1210.h
> > index e9b2147701fc..63d479b20a6c 100644
> > --- a/drivers/staging/iio/resolver/ad2s1210.h
> > +++ b/drivers/staging/iio/resolver/ad2s1210.h
> > @@ -12,9 +12,6 @@
> >  #define _AD2S1210_H
> >  
> >  struct ad2s1210_platform_data {
> > -	unsigned int		sample;
> > -	unsigned int		a[2];
> > -	unsigned int		res[2];
> >  	bool			gpioin;
> >  };
> >  #endif /* _AD2S1210_H */
> 
> -- 
> Slawomir Stepien

Ok, I'll make the changes.

Thanks for the review.

regards,
Nishad



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux