On Thu, 8 Nov 2018 17:27:48 +0800
Song Qiang <songqiang1304521@xxxxxxxxx> wrote:
> Signed-off-by: Song Qiang <songqiang1304521@xxxxxxxxx>
> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.
Thanks,
Jonathan
> ---
> .../bindings/iio/magnetometer/pni,rm3100.txt | 20 +++++++++++++++++++
> 1 file changed, 20 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.txt b/Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.txt
> new file mode 100644
> index 000000000000..497c932e9e39
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.txt
> @@ -0,0 +1,20 @@
> +* PNI RM3100 3-axis magnetometer sensor
> +
> +Required properties:
> +
> +- compatible : should be "pni,rm3100"
> +- reg : the I2C address or SPI chip select number of the sensor.
> +
> +Optional properties:
> +
> +- interrupts: data ready (DRDY) from the chip.
> + The interrupts can be triggered on level high.
> +
> +Example:
> +
> +rm3100: rm3100@20 {
> + compatible = "pni,rm3100";
> + reg = <0x20>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
> +};
