[PATCH 0/2] iio: pressure: Add support for Honeywell HSC SPI sensors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi all,

The Honeywell HSC is a series of pressure sensors that provide different
pressure ranges and measurement types (absolute, differential, gauge). The
available output types are analog, I2C or SPI (see [1]).

This driver provides support for a limited set of the HSC sensor models,
namely the absolute pressure sensors with SPI interface.

References:
[1] Datasheet https://sensing.honeywell.com/honeywell-sensing-trustability-hsc-series-high-accuracy-board-mount-pressure-sensors-50099148-a-en.pdf
[2] SPI Communications with Honeywell Digital Output Pressure Sensors https://sensing.honeywell.com/spi-comms-digital-ouptu-pressure-sensors-tn-008202-3-en-final-30may12.pdf

Carlos Iglesias (2):
  dt-bindings: iio: pressure: Add support for Honeywell HSC SPI sensors
  iio: pressure: Add support for Honeywell HSC SPI sensors

 .../bindings/iio/pressure/hsc_spi.txt         |  85 +++
 MAINTAINERS                                   |   6 +
 drivers/iio/pressure/Kconfig                  |  10 +
 drivers/iio/pressure/Makefile                 |   2 +
 drivers/iio/pressure/hsc_spi.c                | 543 ++++++++++++++++++
 5 files changed, 646 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/pressure/hsc_spi.txt
 create mode 100644 drivers/iio/pressure/hsc_spi.c

-- 
2.19.1





[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux