From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
Update the sensor settings to support the LSM9DS1 sensor. Although the
LSM9DS1 accelerometer and gyroscope are coupled together to use the same
FIFO, the magnetometer is separate and can be cleanly supported without
refactoring the existing driver.
Signed-off-by: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
---
v2:
- Rename lsm9ds1 --> lsm9ds1-magn and lsm9ds1_magn, as this is a multi-device
chip.
- Use the register layout of LIS3MDL, as the two chips match.
- Add I2C compatibility strings.
drivers/iio/magnetometer/st_magn.h | 1 +
drivers/iio/magnetometer/st_magn_core.c | 1 +
drivers/iio/magnetometer/st_magn_i2c.c | 5 +++++
drivers/iio/magnetometer/st_magn_spi.c | 5 +++++
4 files changed, 12 insertions(+)
diff --git a/drivers/iio/magnetometer/st_magn.h b/drivers/iio/magnetometer/st_magn.h
index 8fe51ce427bd..bc14ad4f1b26 100644
--- a/drivers/iio/magnetometer/st_magn.h
+++ b/drivers/iio/magnetometer/st_magn.h
@@ -20,6 +20,7 @@
#define LIS3MDL_MAGN_DEV_NAME "lis3mdl"
#define LSM303AGR_MAGN_DEV_NAME "lsm303agr_magn"
#define LIS2MDL_MAGN_DEV_NAME "lis2mdl"
+#define LSM9DS1_MAGN_DEV_NAME "lsm9ds1_magn"
int st_magn_common_probe(struct iio_dev *indio_dev);
void st_magn_common_remove(struct iio_dev *indio_dev);
diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
index 72f6d1335a04..a186b844d664 100644
--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -267,6 +267,7 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = {
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = LIS3MDL_MAGN_DEV_NAME,
+ [1] = LSM9DS1_MAGN_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_magn_2_16bit_channels,
.odr = {
diff --git a/drivers/iio/magnetometer/st_magn_i2c.c b/drivers/iio/magnetometer/st_magn_i2c.c
index feaa28cf6a77..68650f5f5c19 100644
--- a/drivers/iio/magnetometer/st_magn_i2c.c
+++ b/drivers/iio/magnetometer/st_magn_i2c.c
@@ -44,6 +44,10 @@ static const struct of_device_id st_magn_of_match[] = {
.compatible = "st,lis2mdl",
.data = LIS2MDL_MAGN_DEV_NAME,
},
+ {
+ .compatible = "st,lsm9ds1-magn",
+ .data = LSM9DS1_MAGN_DEV_NAME,
+ },
{},
};
MODULE_DEVICE_TABLE(of, st_magn_of_match);
@@ -90,6 +94,7 @@ static const struct i2c_device_id st_magn_id_table[] = {
{ LIS3MDL_MAGN_DEV_NAME },
{ LSM303AGR_MAGN_DEV_NAME },
{ LIS2MDL_MAGN_DEV_NAME },
+ { LSM9DS1_MAGN_DEV_NAME },
{},
};
MODULE_DEVICE_TABLE(i2c, st_magn_id_table);
diff --git a/drivers/iio/magnetometer/st_magn_spi.c b/drivers/iio/magnetometer/st_magn_spi.c
index 15bb09267098..cb05fcd9ddfe 100644
--- a/drivers/iio/magnetometer/st_magn_spi.c
+++ b/drivers/iio/magnetometer/st_magn_spi.c
@@ -39,6 +39,10 @@ static const struct of_device_id st_magn_of_match[] = {
.compatible = "st,lis2mdl",
.data = LIS2MDL_MAGN_DEV_NAME,
},
+ {
+ .compatible = "st,lsm9ds1-magn",
+ .data = LSM9DS1_MAGN_DEV_NAME,
+ },
{}
};
MODULE_DEVICE_TABLE(of, st_magn_of_match);
@@ -81,6 +85,7 @@ static const struct spi_device_id st_magn_id_table[] = {
{ LIS3MDL_MAGN_DEV_NAME },
{ LSM303AGR_MAGN_DEV_NAME },
{ LIS2MDL_MAGN_DEV_NAME },
+ { LSM9DS1_MAGN_DEV_NAME },
{},
};
MODULE_DEVICE_TABLE(spi, st_magn_id_table);
--
2.11.0
