Re: [PATCH 2/7] iio: adc: meson-saradc: add support for the chip's temperature sensor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, 28 Oct 2018 18:02:28 +0100
Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> wrote:

Hi Martin,
..

> > > +     if (buf[3] & MESON_SARADC_EFUSE_BYTE3_IS_CALIBRATED)
> > > +             priv->temperature_sensor_calibrated = true;
> > > +     else
> > > +             priv->temperature_sensor_calibrated = false;  
> >
> > Could just assign?
> >         priv->temperature_sensor_calibrated =
> >                 buf[3] & MEESON_SARADC_EFUSE_BYTE3_IS_CALIBRATED;  
> I could change this but (personal preference here) my eyes are not
> trained to read variable assignments where the value is broken into a
> new line
> looking back at it I could also remove the whole "else" block as
> "false" is obviously the default value
> 
> let me know whether you'd like me to change this, then I'll do that for v2

I don't feel strongly on any of the options.. Take your pick!

> 
> > > +
> > > +     priv->temperature_sensor_coefficient = buf[2] & trimming_mask;
> > > +
> > > +     upper_adc_val = FIELD_GET(MESON_SARADC_EFUSE_BYTE3_UPPER_ADC_VAL,
> > > +                               buf[3]);
> > > +
> > > +     priv->temperature_sensor_adc_val = buf[2];
> > > +     priv->temperature_sensor_adc_val |= upper_adc_val << BITS_PER_BYTE;
> > > +     priv->temperature_sensor_adc_val >>= trimming_bits;
> > > +
> > > +     kfree(buf);
> > > +
> > > +     return 0;
> > > +}
> > > +  
> > ...  
> 
> 
> Regards
> Martin




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux