Linux CAN Development
[Prev Page][Next Page]
[PATCH] can: usb: delete a redundant dev_kfree_skb() in ems_usb_start_xmit(),
Hangyu Hua
[PATCH] dt-bindings: net: can: renesas,rcar-canfd: Document RZ/V2L SoC,
Lad Prabhakar
[PATCH net 0/3] pull-request: can 2022-02-25,
Marc Kleine-Budde
[PATCH] can: usb: fix a possible memory leak in esd_usb2_start_xmit,
Hangyu Hua
can: m_can: m_can_isr IR_ERR_ALL_30X,
Michael Anochin
[PATCH net-next 0/36] pull-request: can-next 2022-02-24,
Marc Kleine-Budde
- [PATCH net-next 34/36] can: mcp251xfd: ring: update FIFO setup debug info, Marc Kleine-Budde
- [PATCH net-next 13/36] can: etas_es58x: use BITS_PER_TYPE() instead of manual calculation, Marc Kleine-Budde
- [PATCH net-next 27/36] can: mcp251xfd: mcp251xfd_register(): prepare to activate PLL after softreset, Marc Kleine-Budde
- [PATCH net-next 07/36] can: bittiming: can_validate_bitrate(): simplify bit rate checking, Marc Kleine-Budde
- [PATCH net-next 18/36] can: mcp251xfd: mcp251xfd_chip_stop(): convert to a void function, Marc Kleine-Budde
- [PATCH net-next 32/36] can: mcp251xfd: ring: change order of TX and RX FIFOs, Marc Kleine-Budde
- [PATCH net-next 14/36] can: mcp251xfd: mcp251xfd_reg_invalid(): rename from mcp251xfd_osc_invalid(), Marc Kleine-Budde
- [PATCH net-next 24/36] can: mcp251xfd: mcp251xfd_chip_wake(): renamed from mcp251xfd_chip_clock_enable(), Marc Kleine-Budde
- [PATCH net-next 09/36] can: kvaser_usb: kvaser_usb_send_cmd(): remove redundant variable actual_len, Marc Kleine-Budde
- [PATCH net-next 15/36] can: mcp251xfd: mcp251xfd_regmap_crc_read(): ignore CRC error only if solely OSC register is read, Marc Kleine-Budde
- [PATCH net-next 30/36] can: mcp251xfd: mcp251xfd_ring_init(): split ring_init into separate functions, Marc Kleine-Budde
- [PATCH net-next 12/36] can: xilinx_can: Add check for NAPI Poll function, Marc Kleine-Budde
- [PATCH net-next 22/36] can: mcp251xfd: mcp251xfd_chip_softreset_check(): wait for OSC ready before accessing chip, Marc Kleine-Budde
- [PATCH net-next 02/36] dt-binding: can: sun4i_can: include common CAN controller bindings, Marc Kleine-Budde
- [PATCH net-next 29/36] can: mcp251xfd: introduce struct mcp251xfd_tx_ring::nr and ::fifo_nr and make use of it, Marc Kleine-Budde
- [PATCH net-next 06/36] can: gw: use call_rcu() instead of costly synchronize_rcu(), Marc Kleine-Budde
- [PATCH net-next 33/36] can: mcp251xfd: ring: mcp251xfd_ring_init(): checked RAM usage of ring setup, Marc Kleine-Budde
- [PATCH net-next 05/36] dt-binding: can: m_can: include common CAN controller bindings, Marc Kleine-Budde
- [PATCH net-next 17/36] can: mcp251xfd: mcp251xfd_chip_sleep(): introduce function to bring chip into sleep mode, Marc Kleine-Budde
- [PATCH net-next 11/36] can: softing: softing_netdev_open(): remove redundant ret variable, Marc Kleine-Budde
- [PATCH net-next 28/36] can: mcp251xfd: add support for internal PLL, Marc Kleine-Budde
- [PATCH net-next 19/36] can: mcp251xfd: mcp251xfd_chip_wait_for_osc_ready(): factor out into separate function, Marc Kleine-Budde
- [PATCH net-next 25/36] can: mcp251xfd: __mcp251xfd_chip_set_mode(): prepare for PLL support: improve error handling and diagnostics, Marc Kleine-Budde
- [PATCH net-next 04/36] dt-binding: can: m_can: fix indention of table in bosch,mram-cfg description, Marc Kleine-Budde
- [PATCH net-next 35/36] can: mcp251xfd: prepare for multiple RX-FIFOs, Marc Kleine-Budde
- [PATCH net-next 01/36] dt-binding: can: mcp251xfd: include common CAN controller bindings, Marc Kleine-Budde
- [PATCH net-next 16/36] can: mcp251xfd: mcp251xfd_unregister(): simplify runtime PM handling, Marc Kleine-Budde
- [PATCH net-next 20/36] can: mcp251xfd: mcp251xfd_chip_wait_for_osc_ready(): improve chip detection and error handling, Marc Kleine-Budde
- [PATCH net-next 21/36] can: mcp251xfd: mcp251xfd_chip_wait_for_osc_ready(): prepare for PLL support, Marc Kleine-Budde
- [PATCH net-next 03/36] dt-binding: can: m_can: list Chandrasekar Ramakrishnan as maintainer, Marc Kleine-Budde
- [PATCH net-next 36/36] can: mcp251xfd: mcp251xfd_priv: introduce macros specifying the number of supported TEF/RX/TX rings, Marc Kleine-Budde
- [PATCH net-next 23/36] can: mcp251xfd: mcp251xfd_chip_timestamp_init(): factor out into separate function, Marc Kleine-Budde
- [PATCH net-next 08/36] can: bittiming: mark function arguments and local variables as const, Marc Kleine-Budde
- [PATCH net-next 10/36] can: c_can: ethtool: use default drvinfo, Marc Kleine-Budde
- [PATCH net-next 31/36] can: mcp251xfd: ring: prepare to change order of TX and RX FIFOs, Marc Kleine-Budde
- [PATCH net-next 26/36] can: mcp251xfd: mcp251xfd_chip_clock_init(): prepare for PLL support, wait for OSC ready, Marc Kleine-Budde
[PATCH net-next 0/36] pull-request: can-next 2022-02-22,
Marc Kleine-Budde
- [PATCH net-next 04/36] dt-binding: can: m_can: fix indention of table in bosch,mram-cfg description, Marc Kleine-Budde
- [PATCH net-next 03/36] dt-binding: can: m_can: list Chandrasekar Ramakrishnan as maintainer, Marc Kleine-Budde
- [PATCH net-next 02/36] dt-binding: can: sun4i_can: include common CAN controller bindings, Marc Kleine-Budde
- [PATCH net-next 01/36] dt-binding: can: mcp251xfd: include common CAN controller bindings, Marc Kleine-Budde
- [PATCH net-next 07/36] can: bittiming: can_validate_bitrate(): simplify bit rate checking, Marc Kleine-Budde
- [PATCH net-next 11/36] can: softing: softing_netdev_open(): remove redundant ret variable, Marc Kleine-Budde
- [PATCH net-next 05/36] dt-binding: can: m_can: include common CAN controller bindings, Marc Kleine-Budde
- [PATCH net-next 08/36] can: bittiming: mark function arguments and local variables as const, Marc Kleine-Budde
- [PATCH net-next 09/36] can: kvaser_usb: kvaser_usb_send_cmd(): remove redundant variable actual_len, Marc Kleine-Budde
- [PATCH net-next 12/36] can: xilinx_can: Add check for NAPI Poll function, Marc Kleine-Budde
- [PATCH net-next 13/36] can: etas_es58x: use BITS_PER_TYPE() instead of manual calculation, Marc Kleine-Budde
- [PATCH net-next 10/36] can: c_can: ethtool: use default drvinfo, Marc Kleine-Budde
- [PATCH net-next 06/36] can: gw: use call_rcu() instead of costly synchronize_rcu(), Marc Kleine-Budde
- [PATCH net-next 15/36] can: mcp251xfd: mcp251xfd_regmap_crc_read(): ignore CRC error only if solely OSC register is read, Marc Kleine-Budde
- [PATCH net-next 14/36] can: mcp251xfd: mcp251xfd_reg_invalid(): rename from mcp251xfd_osc_invalid(), Marc Kleine-Budde
- [PATCH net-next 16/36] can: mcp251xfd: mcp251xfd_unregister(): simplify runtime PM handling, Marc Kleine-Budde
- [PATCH net-next 17/36] can: mcp251xfd: mcp251xfd_chip_sleep(): introduce function to bring chip into sleep mode, Marc Kleine-Budde
- [PATCH net-next 18/36] can: mcp251xfd: mcp251xfd_chip_stop(): convert to a void function, Marc Kleine-Budde
- [PATCH net-next 19/36] can: mcp251xfd: mcp251xfd_chip_wait_for_osc_ready(): factor out into separate function, Marc Kleine-Budde
- [PATCH net-next 20/36] can: mcp251xfd: mcp251xfd_chip_wait_for_osc_ready(): improve chip detection and error handling, Marc Kleine-Budde
- [PATCH net-next 22/36] can: mcp251xfd: mcp251xfd_chip_softreset_check(): wait for OSC ready before accessing chip, Marc Kleine-Budde
- [PATCH net-next 21/36] can: mcp251xfd: mcp251xfd_chip_wait_for_osc_ready(): prepare for PLL support, Marc Kleine-Budde
- [PATCH net-next 35/36] can: mcp251xfd: prepare for multiple RX-FIFOs, Marc Kleine-Budde
- [PATCH net-next 36/36] can: mcp251xfd: mcp251xfd_priv: introduce macros specifying the number of supported TEF/RX/TX rings, Marc Kleine-Budde
- [PATCH net-next 31/36] can: mcp251xfd: ring: prepare to change order of TX and RX FIFOs, Marc Kleine-Budde
- [PATCH net-next 34/36] can: mcp251xfd: ring: update FIFO setup debug info, Marc Kleine-Budde
- [PATCH net-next 29/36] can: mcp251xfd: introduce struct mcp251xfd_tx_ring::nr and ::fifo_nr and make use of it, Marc Kleine-Budde
- [PATCH net-next 33/36] can: mcp251xfd: ring: mcp251xfd_ring_init(): checked RAM usage of ring setup, Marc Kleine-Budde
- [PATCH net-next 30/36] can: mcp251xfd: mcp251xfd_ring_init(): split ring_init into separate functions, Marc Kleine-Budde
- [PATCH net-next 24/36] can: mcp251xfd: mcp251xfd_chip_wake(): renamed from mcp251xfd_chip_clock_enable(), Marc Kleine-Budde
- [PATCH net-next 32/36] can: mcp251xfd: ring: change order of TX and RX FIFOs, Marc Kleine-Budde
- [PATCH net-next 27/36] can: mcp251xfd: mcp251xfd_register(): prepare to activate PLL after softreset, Marc Kleine-Budde
- [PATCH net-next 28/36] can: mcp251xfd: add support for internal PLL, Marc Kleine-Budde
- [PATCH net-next 26/36] can: mcp251xfd: mcp251xfd_chip_clock_init(): prepare for PLL support, wait for OSC ready, Marc Kleine-Budde
- [PATCH net-next 25/36] can: mcp251xfd: __mcp251xfd_chip_set_mode(): prepare for PLL support: improve error handling and diagnostics, Marc Kleine-Budde
- [PATCH net-next 23/36] can: mcp251xfd: mcp251xfd_chip_timestamp_init(): factor out into separate function, Marc Kleine-Budde
[syzbot] KASAN: invalid-free in skb_release_data, syzbot
[syzbot] WARNING in j1939_session_deactivate_activate_next,
syzbot
can: m_can: tcan4x5x: wake pin,
Sean Nyekjaer
Looking for CAN FD sample captures for socket-can hardware integration testing,
Matheus Eduardo Garbelini
can: m_can: tcan4x5x m_can_isr do not handle tx if rx fails,
Michael Anochin
[PATCH] can: rcar_canfd: Register the CAN device when fully ready,
Lad Prabhakar
can: tcan4x5x: LatchUp with errno 105 (NOBUFS), when using more than one can interface, Michael Anochin
[PATCH net-next] dt-binding: can: m_can: list Chandrasekar Ramakrishnan as maintainer,
Marc Kleine-Budde
[PATCH net-next 0/8] can: mcp251xfd: add support for multiple,
Marc Kleine-Budde
[PATCH net-next] dt-binding: can: m_can: fix indention of table in bosch,mram-cfg description,
Marc Kleine-Budde
RE: [PATCH net-next] dt-binding: can: m_can: fix indention of table in bosch,mram-cfg description, Chandrasekar R
Re: [PATCH net-next] dt-binding: can: m_can: fix indention of table in bosch,mram-cfg description, Rob Herring
[RFC PATCH v1] can: gs_usb: change active_channels's type from atomic_t to u8,
Vincent Mailhol
lack of bus-off recovery in slcan driver,
Ico Glass
[PATCH v2 2/2] platform: make platform_get_irq_byname_optional() optional, Sergey Shtylyov
can-bcm: EINVAL when TX_DELETE a cyclic CAN FD transmit, Patrick Menschel
[PATCH iproute2] iplink_can: print_usage: typo fix, add missing spaces,
Vincent Mailhol
[PATCH] can: etas_es58x: use BITS_PER_TYPE() instead of manual calculation,
Vincent Mailhol
[PATCH] can: etas_es58x: change opened_channel_cnt's type from atomic_t to u8,
Vincent Mailhol
[PATCH v2] can, tty: elmcan CAN/ldisc driver for ELM327 based OBD-II adapters,
Max Staudt
[PATCH v2] dt-bindings: can: xilinx_can: Convert Xilinx CAN binding to YAML,
Amit Kumar Mahapatra
[PATCH v3 0/4] can: rcar_canfd: Add support for V3U flavor,
Ulrich Hecht
[PATCH net 0/2] pull-request: can 2022-02-09,
Marc Kleine-Budde
[PATCH] can: isotp: fix error path in isotp_sendmsg() to unlock wait queue,
Oliver Hartkopp
Re: [PATCH net-next] can: gw: use call_rcu() instead of costly synchronize_rcu(),
Jakub Kicinski
[PATCH] can: isotp: fix potential CAN frame reception race in isotp_rcv(),
Oliver Hartkopp
[PATCH] can: xilinx_can: Add check for NAPI Poll function,
Srinivas Neeli
[PATCH] dt-bindings: can: xilinx_can: Convert Xilinx CAN binding to YAML,
Amit Kumar Mahapatra
[PATCH 00/15] can: mcp251xfd: add PLL support,
Marc Kleine-Budde
- [PATCH 09/15] can: mcp251xfd: mcp251xfd_chip_softreset_check(): wait for OSC ready before accessing chip, Marc Kleine-Budde
- [PATCH 11/15] can: mcp251xfd: mcp251xfd_chip_wake(): renamed from mcp251xfd_chip_clock_enable(), Marc Kleine-Budde
- [PATCH 14/15] can: mcp251xfd: mcp251xfd_register(): prepare to activate PLL after softreset, Marc Kleine-Budde
- [PATCH 02/15] can: mcp251xfd: mcp251xfd_regmap_crc_read(): ignore CRC error only if solely OSC register is read, Marc Kleine-Budde
- [PATCH 13/15] can: mcp251xfd: mcp251xfd_chip_clock_init(): prepare for PLL support, wait for OSC ready, Marc Kleine-Budde
- [PATCH 12/15] can: mcp251xfd: __mcp251xfd_chip_set_mode(): prepare for PLL support: improve error handling and diagnostics, Marc Kleine-Budde
- [PATCH 03/15] can: mcp251xfd: mcp251xfd_unregister(): simplify runtime PM handling, Marc Kleine-Budde
- [PATCH 15/15] can: mcp251xfd: add support for internal PLL, Marc Kleine-Budde
- [PATCH 04/15] can: mcp251xfd: mcp251xfd_chip_sleep(): introduce function to bring chip into sleep mode, Marc Kleine-Budde
- [PATCH 10/15] can: mcp251xfd: mcp251xfd_chip_timestamp_init(): factor out into separate function, Marc Kleine-Budde
- [PATCH 07/15] can: mcp251xfd: mcp251xfd_chip_wait_for_osc_ready(): improve chip detection and error handling, Marc Kleine-Budde
- [PATCH 06/15] can: mcp251xfd: mcp251xfd_chip_wait_for_osc_ready(): factor out into separate function, Marc Kleine-Budde
- [PATCH 08/15] can: mcp251xfd: mcp251xfd_chip_wait_for_osc_ready(): prepare for PLL support, Marc Kleine-Budde
- [PATCH 05/15] can: mcp251xfd: mcp251xfd_chip_stop(): convert to a void function, Marc Kleine-Budde
- [PATCH 01/15] can: mcp251xfd: mcp251xfd_reg_invalid(): rename from mcp251xfd_osc_invalid(), Marc Kleine-Budde
Re: MCP251xfd PLLEN, Marc Kleine-Budde
[bug report] can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces, Dan Carpenter
RE: [PATCH 6/6] can: peak_usb: add ethtool interface to user defined flashed device number,
Stéphane Grosjean
MCP2518FD : Failed to detect MCP2518FD (osc=0x00000000),
petter
[PATCH 0/6] can: peak_usb: add ethtool interface to flashed value,
Stephane Grosjean
[PATCH] dt-bindings: net: can: fix dtbs warning,
Dinh Nguyen
[RFC PATCH v3] can: isotp: fix CAN frame reception race in isotp_rcv(), Oliver Hartkopp
[RFC][PATCH v2] can: isotp: fix CAN frame reception race in isotp_rcv(),
Oliver Hartkopp
[PATCH 4.9] can: bcm: fix UAF of bcm op,
Ziyang Xuan
[PATCH 4.4] can: bcm: fix UAF of bcm op, Ziyang Xuan
[PATCH] can: isotp: fix CAN frame reception race in isotp_rcv(), Oliver Hartkopp
[PATCH net-next 0/4] dt-binding: can: add common CAN controller bindings to existing CAN driver bindings,
Marc Kleine-Budde
[PATCH 0/9] dt-binding, bittiming and other cleanups,
Marc Kleine-Budde
[PATCH net 0/5] pull-request: can 2022-01-24,
Marc Kleine-Budde
[PATCH 0/5] spi: make remove callback a void function,
Uwe Kleine-König
Re: [PATCH 0/5] spi: make remove callback a void function, Lee Jones
Message not available
Message not available
Message not available
Message not available
Message not available
Message not available
Message not available
[PATCH 4.14] can: bcm: fix UAF of bcm op,
Ziyang Xuan
[PATCH] can: flexcan: mark RX via mailboxes as supported on MCF5441X, Marc Kleine-Budde
[PATCH] drivers: net: remove a dangling pointer in peak_usb_create_dev,
Dongliang Mu
Re: QEMU CAN-FD emulation, Pavel Pisa
[PATCH] can: tcan4x5x: regmap: fix max register value, Marc Kleine-Budde
[PATCH] dt-bindings: can: tcan4x5x: fix mram-cfg RX FIFO config, Marc Kleine-Budde
[PATCH] dt-bindings: Fix array schemas encoded as matrices,
Rob Herring
[PATCH] dt-bindings: Improve phandle-array schemas,
Rob Herring
- Re: [PATCH] dt-bindings: Improve phandle-array schemas, Marc Kleine-Budde
- Re: [PATCH] dt-bindings: Improve phandle-array schemas, Krzysztof Kozlowski
- Re: [PATCH] dt-bindings: Improve phandle-array schemas, Viresh Kumar
- Re: [PATCH] dt-bindings: Improve phandle-array schemas, Greg Kroah-Hartman
- Re: [PATCH] dt-bindings: Improve phandle-array schemas, Geert Uytterhoeven
- Re: [PATCH] dt-bindings: Improve phandle-array schemas, Ulf Hansson
- Re: [PATCH] dt-bindings: Improve phandle-array schemas, Vladimir Oltean
- Re: [PATCH] dt-bindings: Improve phandle-array schemas, Georgi Djakov
- Re: [PATCH] dt-bindings: Improve phandle-array schemas, Arnaud POULIQUEN
- Re: [PATCH] dt-bindings: Improve phandle-array schemas, Mark Brown
- Re: [PATCH] dt-bindings: Improve phandle-array schemas, Vinod Koul
[PATCH AUTOSEL 5.15 185/188] can: flexcan: rename RX modes, Sasha Levin
[PATCH AUTOSEL 5.15 184/188] can: flexcan: allow to change quirks at runtime, Sasha Levin
[PATCH AUTOSEL 5.15 186/188] can: flexcan: add more quirks to describe RX path capabilities, Sasha Levin
[PATCH AUTOSEL 5.16 213/217] can: flexcan: allow to change quirks at runtime, Sasha Levin
[PATCH AUTOSEL 5.16 214/217] can: flexcan: rename RX modes, Sasha Levin
[PATCH AUTOSEL 5.16 215/217] can: flexcan: add more quirks to describe RX path capabilities, Sasha Levin
[PATCH AUTOSEL 5.16 198/217] can: do not increase rx statistics when generating a CAN rx error message frame, Sasha Levin
[PATCH net] can: isotp: isotp_rcv_cf(): fix so->rx race problem,
Ziyang Xuan
[PATCH v8] net: can: Introduce-MEN-16Z192-00-CAN-controller-driver, Abhijeet Badurkar
[PATCH] can: m_can: m_can_fifo_{read,write}: don't read or write from/to FIFO if length is 0,
Marc Kleine-Budde
MCP251xFD runs interrupt handler twice per message.,
Markus Mirevik
Re: Queries on CAN frame work,
Marc Kleine-Budde
[PATCH] drivers/net/can/softing: remove redundant ret variable, cgel . zte
[PATCH v2 0/5] can: rcar_canfd: Add support for V3U flavor,
Ulrich Hecht
[PATCH v2 0/3] add support for Allwinner R40 CAN controller,
Evgeny Boger
[PATCH 0/3] can: mcp251xfd: Transceiver suspend, power management and wake-on-can,
Phil Greenland
[PATCH 2/2] platform: make platform_get_irq_byname_optional() optional, Sergey Shtylyov
[PATCH net] can: bcm: switch timer to HRTIMER_MODE_SOFT and remove hrtimer_tasklet,
Ziyang Xuan
[PATCH] mailmap: update email address of Brian Silverman,
Marc Kleine-Budde
[PATCH iproute2-next v4] iplink_can: add ctrlmode_{supported,_static} to the "--details --json" output,
Vincent Mailhol
[PATCH net 0/5] pull-request: can 2022-01-09,
Marc Kleine-Budde
[PATCH] can: softing: softing_startstop(): fix set but not used variable warning,
Marc Kleine-Budde
[PATCH net-next 0/22] pull-request: can-next 2022-01-08,
Marc Kleine-Budde
- [PATCH net-next 02/22] can: mcp251xfd: remove double blank lines, Marc Kleine-Budde
- [PATCH net-next 03/22] can: mcp251xfd: mcp251xfd_tef_obj_read(): fix typo in error message, Marc Kleine-Budde
- [PATCH net-next 04/22] can: mcp251xfd: add missing newline to printed strings, Marc Kleine-Budde
- [PATCH net-next 01/22] can: janz-ican3: initialize dlc variable, Marc Kleine-Budde
- [PATCH net-next 07/22] can: mcp251xfd: mcp251xfd_handle_rxovif(): denote RX overflow message to debug + add rate limiting, Marc Kleine-Budde
- [PATCH net-next 08/22] can: mcp251xfd: mcp251xfd.h: sort function prototypes, Marc Kleine-Budde
- [PATCH net-next 05/22] can: mcp251xfd: mcp251xfd_open(): open_candev() first, Marc Kleine-Budde
- [PATCH net-next 09/22] can: mcp251xfd: move RX handling into separate file, Marc Kleine-Budde
- [PATCH net-next 11/22] can: mcp251xfd: move TEF handling into separate file, Marc Kleine-Budde
- [PATCH net-next 10/22] can: mcp251xfd: move TX handling into separate file, Marc Kleine-Budde
- [PATCH net-next 13/22] can: mcp251xfd: move ring init into separate function, Marc Kleine-Budde
- [PATCH net-next 12/22] can: mcp251xfd: move chip FIFO init into separate file, Marc Kleine-Budde
- [PATCH net-next 15/22] can: flexcan: move driver into separate sub directory, Marc Kleine-Budde
- [PATCH net-next 18/22] can: flexcan: add more quirks to describe RX path capabilities, Marc Kleine-Budde
- [PATCH net-next 21/22] docs: networking: device drivers: add can sub-folder, Marc Kleine-Budde
- [PATCH net-next 16/22] can: flexcan: allow to change quirks at runtime, Marc Kleine-Budde
- [PATCH net-next 19/22] can: flexcan: add ethtool support to change rx-rtr setting during runtime, Marc Kleine-Budde
- [PATCH net-next 22/22] docs: networking: device drivers: can: add flexcan, Marc Kleine-Budde
- [PATCH net-next 20/22] can: flexcan: add ethtool support to get rx/tx ring parameters, Marc Kleine-Budde
- [PATCH net-next 06/22] can: mcp251xfd: mcp251xfd_open(): make use of pm_runtime_resume_and_get(), Marc Kleine-Budde
- [PATCH net-next 17/22] can: flexcan: rename RX modes, Marc Kleine-Budde
- [PATCH net-next 14/22] can: mcp251xfd: introduce and make use of mcp251xfd_is_fd_mode(), Marc Kleine-Budde
[RFC PATCH] can: flexcan: add ethtool support to get rx/tx ring parameters,
Dario Binacchi
[PATCH] can: janz-ican3: initialize dlc variable,
trix
[PATCH] softingcs: Fix memleak on registration failure in softingcs_probe,
Miaoqian Lin
[PATCH v2 1/7] can: flexcan: change RX-FIFO feature at runtime,
Marc Kleine-Budde
Filter on controller level,
Dr. Michael Lauer
[RFC PATCH 0/2] Add the first documentation for a CAN driver,
Dario Binacchi
[PATCH] can: rcar_canfd: Make sure we free CAN network device,
Lad Prabhakar
mcf5441x: flexcan FIFO and mailbox mode (was: Re: [PATCH v5 5/5] can: flexcan: add mcf5441x support),
Marc Kleine-Budde
[RFC PATCH v3] iplink_can: add ctrlmode_{supported,_static} to the "--details --json" output,
Vincent Mailhol
[PATCH] can: gs_usb: Zero-initialize flags,
Brian Silverman
[RFC PATCH] can: m_can: Add driver for M_CAN hardware in NVIDIA devices,
Brian Silverman
[PATCH net 0/2] pull-request: can 2022-01-05,
Marc Kleine-Budde
[PATCH 00/13] can: mcp251xfd: cleanups and preparation to improve FIFO handling,
Marc Kleine-Budde
- [PATCH 01/13] can: mcp251xfd: remove double blank lines, Marc Kleine-Budde
- [PATCH 02/13] can: mcp251xfd: mcp251xfd_tef_obj_read(): fix typo in error message, Marc Kleine-Budde
- [PATCH 03/13] can: mcp251xfd: add missing newline to printed strings, Marc Kleine-Budde
- [PATCH 05/13] can: mcp251xfd: mcp251xfd_open(): make use of pm_runtime_resume_and_get(), Marc Kleine-Budde
- [PATCH 06/13] can: mcp251xfd: mcp251xfd_handle_rxovif(): denote RX overflow message to debug + add rate limiting, Marc Kleine-Budde
- [PATCH 04/13] can: mcp251xfd: mcp251xfd_open(): open_candev() first, Marc Kleine-Budde
- [PATCH 07/13] can: mcp251xfd: mcp251xfd.h: sort function prototypes, Marc Kleine-Budde
- [PATCH 08/13] can: mcp251xfd: move RX handling into separate file, Marc Kleine-Budde
- [PATCH 10/13] can: mcp251xfd: move TEF handling into separate file, Marc Kleine-Budde
- [PATCH 09/13] can: mcp251xfd: move TX handling into separate file, Marc Kleine-Budde
- [PATCH 11/13] can: mcp251xfd: move chip FIFO init into separate file, Marc Kleine-Budde
- [PATCH 12/13] can: mcp251xfd: move ring init into separate function, Marc Kleine-Budde
- [PATCH 13/13] can: mcp251xfd: introduce and make use of mcp251xfd_is_fd_mode(), Marc Kleine-Budde
[PATCH net-next 0/15] pull-request: can-next 2022-01-05,
Marc Kleine-Budde
- [PATCH net-next 01/15] can: usb_8dev: remove unused member echo_skb from struct usb_8dev_priv, Marc Kleine-Budde
- [PATCH net-next 02/15] can: mcp251x: mcp251x_gpio_setup(): Get rid of duplicate of_node assignment, Marc Kleine-Budde
- [PATCH net-next 03/15] can: kvaser_usb: make use of units.h in assignment of frequency, Marc Kleine-Budde
- [PATCH net-next 04/15] can: ti_hecc: ti_hecc_probe(): use platform_get_irq() to get the interrupt, Marc Kleine-Budde
- [PATCH net-next 05/15] can: sja1000: sp_probe(): use platform_get_irq() to get the interrupt, Marc Kleine-Budde
- [PATCH net-next 06/15] can: etas_es58x: es58x_init_netdev: populate net_device::dev_port, Marc Kleine-Budde
- [PATCH net-next 08/15] can: kvaser_usb: do not increase tx statistics when sending error message frames, Marc Kleine-Budde
- [PATCH net-next 09/15] can: do not copy the payload of RTR frames, Marc Kleine-Budde
- [PATCH net-next 12/15] can: dev: replace can_priv::ctrlmode_static by can_get_static_ctrlmode(), Marc Kleine-Budde
- [PATCH net-next 13/15] can: dev: add sanity check in can_set_static_ctrlmode(), Marc Kleine-Budde
- [PATCH net-next 14/15] can: dev: reorder struct can_priv members for better packing, Marc Kleine-Budde
- [PATCH net-next 15/15] can: netlink: report the CAN controller mode supported flags, Marc Kleine-Budde
- [PATCH net-next 10/15] can: do not increase rx_bytes statistics for RTR frames, Marc Kleine-Budde
- [PATCH net-next 07/15] can: do not increase rx statistics when generating a CAN rx error message frame, Marc Kleine-Budde
- [PATCH net-next 11/15] can: do not increase tx_bytes statistics for RTR frames, Marc Kleine-Budde
[PATCH RFC] can: isotp: convert struct tpcon::{idx,len} to unsigned int,
Marc Kleine-Budde
[PATCH] can: usb_8dev: remove unused member echo_skb from struct usb_8dev_priv, Marc Kleine-Budde
[PATCH v2 1/3] can: flexcan: change RX-FIFO feature at runtime,
Marc Kleine-Budde
[RFC PATCH 0/2] Change flexcan features at runtime,
Dario Binacchi
can-isotp: TX stmin violations,
Maik Allgöwer
[PATCH] can: flexcan: switch the i.MX series to timestamp based rx-offload,
Dario Binacchi
[PATCH bpf-next v2] net: don't include filter.h from net/sock.h,
Jakub Kicinski
[PATCH bpf-next] net: don't include filter.h from net/sock.h,
Jakub Kicinski
[RFC 17/32] net: Kconfig: add HAS_IOPORT dependencies,
Niklas Schnelle
[PATCH] can: xilinx_can: Check for error irq, Jiasheng Jiang
Dual CAN(FD) board w/ MACP251xfd,
Dr. Michael Lauer
[PATCH] can: softing_cs: fix memleak on registration failure,
Johan Hovold
[PATCH] can: kvaser_usb: get CAN clock frequency from device,
Jimmy Assarsson
[PATCH] can: sja1000: Use platform_get_irq(), Lad Prabhakar
[PATCH] can: ti_hecc: Use platform_get_irq() to get the interrupt, Lad Prabhakar
[PATCH 5.15 0/3] m_can_pci bit timings for Elkhart Lake,
Matthias Schiffer
Re: [syzbot] kernel BUG in pskb_expand_head,
syzbot
[PATCH v3 0/2] CAN: Add support for setting mux,
Aswath Govindraju
[PATCH v2 0/2] CAN: Add support for setting mux,
Aswath Govindraju
[PATCH v6 0/4] report the controller capabilities through the netlink interface,
Vincent Mailhol
[Index of Archives]
[Automotive Discussions]
[Linux Kernel Development]
[Security]
[Linux ARM Kernel]
[Linux MIPS]
[Linux S390]
[Bugtraq]
[Fedora ARM]
