[PATCH AUTOSEL 4.9 05/11] can: rcar_canfd: rcar_canfd_channel_probe(): register the CAN device when fully ready

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>

[ Upstream commit c5048a7b2c23ab589f3476a783bd586b663eda5b ]

Register the CAN device only when all the necessary initialization is
completed. This patch makes sure all the data structures and locks are
initialized before registering the CAN device.

Link: https://lore.kernel.org/all/20220221225935.12300-1-prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx
Reported-by: Pavel Machek <pavel@xxxxxxx>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
Reviewed-by: Pavel Machek <pavel@xxxxxxx>
Reviewed-by: Ulrich Hecht <uli+renesas@xxxxxxxx>
Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/net/can/rcar/rcar_canfd.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c
index 43cdd5544b0c..a127c853a4e9 100644
--- a/drivers/net/can/rcar/rcar_canfd.c
+++ b/drivers/net/can/rcar/rcar_canfd.c
@@ -1601,15 +1601,15 @@ static int rcar_canfd_channel_probe(struct rcar_canfd_global *gpriv, u32 ch,
 
 	netif_napi_add(ndev, &priv->napi, rcar_canfd_rx_poll,
 		       RCANFD_NAPI_WEIGHT);
+	spin_lock_init(&priv->tx_lock);
+	devm_can_led_init(ndev);
+	gpriv->ch[priv->channel] = priv;
 	err = register_candev(ndev);
 	if (err) {
 		dev_err(&pdev->dev,
 			"register_candev() failed, error %d\n", err);
 		goto fail_candev;
 	}
-	spin_lock_init(&priv->tx_lock);
-	devm_can_led_init(ndev);
-	gpriv->ch[priv->channel] = priv;
 	dev_info(&pdev->dev, "device registered (channel %u)\n", priv->channel);
 	return 0;
 
-- 
2.34.1




[Index of Archives]     [Automotive Discussions]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]     [CAN Bus]

  Powered by Linux