On 10.03.2022 09:45:50, Geert Uytterhoeven wrote: > Hi Marc, > > On Thu, Mar 10, 2022 at 9:26 AM Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> wrote: > > On 09.03.2022 17:26:05, Ulrich Hecht wrote: > > > This adds CANFD support for V3U (R8A779A0) SoCs. The V3U's IP supports up > > > to eight channels and has some other minor differences to the Gen3 variety: > > > > > > - changes to some register offsets and layouts > > > - absence of "classic CAN" registers, both modes are handled through the > > > CANFD register set > > > > > > This patch set tries to accommodate these changes in a minimally intrusive > > > way. > > > > > > This revision tries to address the remaining style issues raised by > > > reviewers. Thanks to Vincent, Marc and Simon for their reviews and > > > suggestions. > > > > > > It has been successfully tested remotely on a V3U Falcon board, but only > > > with channels 0 and 1. We were not able to get higher channels to work in > > > both directions yet. It is not currently clear if this is an issue with the > > > driver, the board or the silicon, but the BSP vendor driver only works with > > > channels 0 and 1 as well, so my bet is on one of the latter. For this > > > reason, this series only enables known-working channels 0 and 1 on Falcon. > > > > Should I take the whole series via linux-can/next? > > Please don't take the DTS changes. Ok, I'm taking the yaml update and the driver changes. regards, Marc -- Pengutronix e.K. | Marc Kleine-Budde | Embedded Linux | https://www.pengutronix.de | Vertretung West/Dortmund | Phone: +49-231-2826-924 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Attachment:
signature.asc
Description: PGP signature
