Newer versions of the widely used open source firmware candleLight support hardware timestamps. The support is activated by setting the GS_CAN_MODE_HW_TIMESTAMP in the GS_USB_BREQ_MODE request. Although timestamp support is not yet supported by this driver, add the missing bit for documentation purpose. Link: https://lore.kernel.org/all/20220309124132.291861-9-mkl@xxxxxxxxxxxxxx Link: https://github.com/candle-usb/candleLight_fw/commit/44431f4a4354a878fbd15b273bf04fce1dcdff7e Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> --- drivers/net/can/usb/gs_usb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/can/usb/gs_usb.c b/drivers/net/can/usb/gs_usb.c index fa370549bd9e..62076c5e8e4e 100644 --- a/drivers/net/can/usb/gs_usb.c +++ b/drivers/net/can/usb/gs_usb.c @@ -92,6 +92,7 @@ struct gs_device_config { #define GS_CAN_MODE_LOOP_BACK BIT(1) #define GS_CAN_MODE_TRIPLE_SAMPLE BIT(2) #define GS_CAN_MODE_ONE_SHOT BIT(3) +#define GS_CAN_MODE_HW_TIMESTAMP BIT(4) struct gs_device_mode { __le32 mode; -- 2.35.1
