Hello Jakub, hello David,
this is a pull request of 29 patches for net-next/master.
The first 3 patches are by Oliver Hartkopp, target the CAN ISOTP
protocol and update the CAN frame sending behavior, and increases the
max PDU size to 64 kByte.
The next 2 patches are also by Oliver Hartkopp and update the virtual
VXCAN driver so that CAN frames send into the peer name space show up
as RX'ed CAN frames.
Vincent Mailhol contributes a patch for the etas_es58x driver to fix a
false positive dereference uninitialized variable warning.
2 patches by Ulrich Hecht add r8a779a0 SoC support to the rcar_canfd
driver.
The remaining 21 patches target the gs_usb driver and are by Peter
Fink, Ben Evans, Eric Evenchick and me. This series cleans up the
gs-usb driver, documents some bits of the USB ABI used by the widely
used open source firmware candleLight, adds support for up to 3 CAN
interfaces per USB device, adds CAN-FD support, adds quirks for some
hardware and software workarounds and finally adds support for 2 new
devices.
regards,
Marc
---
The following changes since commit 3126b731ceb168b3a780427873c417f2abdd5527:
net: dsa: tag_rtl8_4: fix typo in modalias name (2022-03-09 20:36:24 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git tags/linux-can-next-for-5.18-20220310
for you to fetch changes up to 0691a4b55c89055c1efb61a7696f4bc6aa5cf630:
can: gs_usb: add VID/PID for ABE CAN Debugger devices (2022-03-10 09:49:16 +0100)
----------------------------------------------------------------
linux-can-next-for-5.18-20220310
----------------------------------------------------------------
Ben Evans (1):
can: gs_usb: add VID/PID for ABE CAN Debugger devices
Marc Kleine-Budde (14):
can: gs_usb: use consistent one space indention
can: gs_usb: fix checkpatch warning
can: gs_usb: sort include files alphabetically
can: gs_usb: GS_CAN_FLAG_OVERFLOW: make use of BIT()
can: gs_usb: rewrap error messages
can: gs_usb: rewrap usb_control_msg() and usb_fill_bulk_urb()
can: gs_usb: gs_make_candev(): call SET_NETDEV_DEV() after handling all bt_const->feature
can: gs_usb: add HW timestamp mode bit
can: gs_usb: update GS_CAN_FEATURE_IDENTIFY documentation
can: gs_usb: document the USER_ID feature
can: gs_usb: document the PAD_PKTS_TO_MAX_PKT_SIZE feature
can: gs_usb: gs_usb_probe(): introduce udev and make use of it
can: gs_usb: support up to 3 channels per device
can: gs_usb: add quirk for CANtact Pro overlapping GS_USB_BREQ value
Oliver Hartkopp (5):
can: isotp: add local echo tx processing for consecutive frames
can: isotp: set default value for N_As to 50 micro seconds
can: isotp: set max PDU size to 64 kByte
vxcan: remove sk reference in peer skb
vxcan: enable local echo for sent CAN frames
Peter Fink (6):
can: gs_usb: use union and FLEX_ARRAY for data in struct gs_host_frame
can: gs_usb: add CAN-FD support
can: gs_usb: add usb quirk for NXP LPC546xx controllers
can: gs_usb: activate quirks for CANtact Pro unconditionally
can: gs_usb: add extended bt_const feature
can: gs_usb: add VID/PID for CES CANext FD devices
Ulrich Hecht (2):
dt-bindings: can: renesas,rcar-canfd: Document r8a779a0 support
can: rcar_canfd: Add support for r8a779a0 SoC
Vincent Mailhol (1):
can: etas_es58x: es58x_fd_rx_event_msg(): initialize rx_event_msg before calling es58x_check_msg_len()
.../bindings/net/can/renesas,rcar-canfd.yaml | 2 +
drivers/net/can/rcar/rcar_canfd.c | 353 +++++++++-------
drivers/net/can/usb/etas_es58x/es58x_fd.c | 3 +-
drivers/net/can/usb/gs_usb.c | 446 +++++++++++++++------
drivers/net/can/vxcan.c | 19 +-
include/uapi/linux/can/isotp.h | 28 +-
net/can/isotp.c | 235 +++++++----
7 files changed, 732 insertions(+), 354 deletions(-)
