The CTU CAN-FD IP core is only useful when used with one of the corresponding PCI/PCIe or platform (FPGA, SoC) drivers, which depend on PCI resp. OF. Hence make the users select the core driver code, instead of letting then depend on it. Keep the core code config option visible when compile-testing, to maintain compile-coverage. Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> --- drivers/net/can/ctucanfd/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/can/ctucanfd/Kconfig b/drivers/net/can/ctucanfd/Kconfig index 48963efc7f19955f..3c383612eb1764e2 100644 --- a/drivers/net/can/ctucanfd/Kconfig +++ b/drivers/net/can/ctucanfd/Kconfig @@ -1,5 +1,5 @@ config CAN_CTUCANFD - tristate "CTU CAN-FD IP core" + tristate "CTU CAN-FD IP core" if COMPILE_TEST help This driver adds support for the CTU CAN FD open-source IP core. More documentation and core sources at project page @@ -13,8 +13,8 @@ config CAN_CTUCANFD config CAN_CTUCANFD_PCI tristate "CTU CAN-FD IP core PCI/PCIe driver" - depends on CAN_CTUCANFD depends on PCI + select CAN_CTUCANFD help This driver adds PCI/PCIe support for CTU CAN-FD IP core. The project providing FPGA design for Intel EP4CGX15 based DB4CGX15 @@ -23,8 +23,8 @@ config CAN_CTUCANFD_PCI config CAN_CTUCANFD_PLATFORM tristate "CTU CAN-FD IP core platform (FPGA, SoC) driver" - depends on CAN_CTUCANFD depends on OF || COMPILE_TEST + select CAN_CTUCANFD help The core has been tested together with OpenCores SJA1000 modified to be CAN FD frames tolerant on MicroZed Zynq based -- 2.25.1
