Linux CAN Development - Date Index

• Thread Index

• [PATCH] can: isotp: support dynamic flow control parameters
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v1] net: can: j1939: enhanced error handling for tightly received RTS messages in xtp_rx_rts_session_new
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v1] net: can: j1939: enhanced error handling for tightly received RTS messages in xtp_rx_rts_session_new
  • From: xingwei lee <xrivendell7@xxxxxxxxx>
• Re: [syzbot] KASAN: use-after-free Read in j1939_session_get_by_addr
  • From: syzbot <syzbot+d9536adc269404a984f8@xxxxxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v1 0/2] can: mcp251xfd: better workaround broken TX FIFO STA register read
  • From: <Thomas.Kopp@xxxxxxxxxxxxx>
• [syzbot] Monthly can report (Dec 2023)
  • From: syzbot <syzbot+list8a8105c4458877154798@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC] Questionable RCU/BH usage in cgw_create_job().
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [RFC] Questionable RCU/BH usage in cgw_create_job().
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH v7 3/3] can: xilinx_can: Add ethtool stats interface for ECC errors
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [PATCH v7 2/3] can: xilinx_can: Add ECC support
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [PATCH v7 1/3] dt-bindings: can: xilinx_can: Add 'xlnx,has-ecc' optional property
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [PATCH v7 0/3] can: xilinx_can: Add ECC feature support
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• Re: RE: mcp251xfd on NXP LX2160A
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v6 3/3] can: xilinx_can: Add ethtool stats interface for ECC errors
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v6 3/3] can: xilinx_can: Add ethtool stats interface for ECC errors
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [PATCH v6 2/3] can: xilinx_can: Add ECC support
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [PATCH v6 1/3] dt-bindings: can: xilinx_can: Add 'xlnx,has-ecc' optional property
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [PATCH v6 0/3] can: xilinx_can: Add ECC feature support
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [syzbot] [can?] memory leak in j1939_netdev_start
  • From: syzbot <syzbot+1d37bef05da87b99c5a6@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] net: can: Use device_get_match_data()
  • From: Simon Horman <horms@xxxxxxxxxx>
• RE: mcp251xfd on NXP LX2160A
  • From: <Thomas.Kopp@xxxxxxxxxxxxx>
• [PATCH v2] net: can: Use device_get_match_data()
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v11 2/2] can: esd: add support for esd GmbH PCIe/402 CAN interface family
  • From: Stefan Mätje <stefan.maetje@xxxxxx>
• [PATCH v11 1/2] MAINTAINERS: add Stefan Mätje as maintainer for the esd electronics GmbH PCIe/402 CAN drivers
  • From: Stefan Mätje <stefan.maetje@xxxxxx>
• [PATCH v11 0/2] can: esd: add support for esd GmbH PCIe/402 CAN interface
  • From: Stefan Mätje <stefan.maetje@xxxxxx>
• Re: [PATCH v10 1/2] MAINTAINERS: add Stefan Mätje as maintainer for the esd electronics GmbH PCIe/402 CAN drivers
  • From: Stefan Mätje <Stefan.Maetje@xxxxxx>
• Re: [PATCH v10 2/2] can: esd: add support for esd GmbH PCIe/402 CAN interface family
  • From: Stefan Mätje <Stefan.Maetje@xxxxxx>
• Re: [PATCH v10 0/2] can: esd: add support for esd GmbH PCIe/402 CAN interface
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [PATCH v10 2/2] can: esd: add support for esd GmbH PCIe/402 CAN interface family
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [PATCH v10 1/2] MAINTAINERS: add Stefan Mätje as maintainer for the esd electronics GmbH PCIe/402 CAN drivers
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [RESEND PATCH] net: can: Use device_get_match_data()
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v10 2/2] can: esd: add support for esd GmbH PCIe/402 CAN interface family
  • From: Stefan Mätje <stefan.maetje@xxxxxx>
• [PATCH v10 1/2] MAINTAINERS: add Stefan Mätje as maintainer for the esd electronics GmbH PCIe/402 CAN drivers
  • From: Stefan Mätje <stefan.maetje@xxxxxx>
• [PATCH v10 0/2] can: esd: add support for esd GmbH PCIe/402 CAN interface
  • From: Stefan Mätje <stefan.maetje@xxxxxx>
• mcp251xfd on NXP LX2160A
  • From: petter@xxxxxxxxxx
• Re: [syzbot] KASAN: use-after-free Read in j1939_session_get_by_addr
  • From: syzbot <syzbot+d9536adc269404a984f8@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/3] dt-bindings: can: xilinx_can: Add 'xlnx,has-ecc' optional property
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v1] net: can: j1939: enhanced error handling for tightly received RTS messages in xtp_rx_rts_session_new
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v5 3/3] can: xilinx_can: Add ethtool stats interface for ECC errors
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [PATCH v5 2/3] can: xilinx_can: Add ECC support
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [PATCH v5 1/3] dt-bindings: can: xilinx_can: Add 'xlnx,has-ecc' optional property
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [PATCH v5 0/3] can: xilinx_can: Add ECC feature support
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• Re: [PATCH] can: j1939: prevent deadlock by changing j1939_socks_lock to rwlock
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v9 2/2] can: esd: add support for esd GmbH PCIe/402 CAN interface family
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH v9 2/2] can: esd: add support for esd GmbH PCIe/402 CAN interface family
  • From: Stefan Mätje <Stefan.Maetje@xxxxxx>
• Re: [RESEND PATCH] net: can: Use device_get_match_data()
  • From: Simon Horman <horms@xxxxxxxxxx>
• [RESEND PATCH] net: can: Use device_get_match_data()
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [syzbot] [can?] possible deadlock in j1939_sk_errqueue (2)
  • From: syzbot <syzbot+1591462f226d9cbf0564@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] can: tcan4x5x: support resuming from rx interrupt signal
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• Re: [PATCH v3 1/3] can: m_can: allow keeping the transceiver running in suspend
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• Re: [PATCH v6 00/14] can: m_can: Optimizations for m_can/tcan part 2
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• Re: [PATCH v3 3/3] dt-bindings: can: tcan4x5x: Document the wakeup-source flag
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH] can: kvaser_pciefd: Add support for Kvaser M.2 PCIe 4xCAN
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• Re: [PATCH v6 00/14] can: m_can: Optimizations for m_can/tcan part 2
  • From: Martin Hundebøll <martin@xxxxxxxxxx>
• Re: [PATCH v6 00/14] can: m_can: Optimizations for m_can/tcan part 2
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v6 00/14] can: m_can: Optimizations for m_can/tcan part 2
  • From: Martin Hundebøll <martin@xxxxxxxxxx>
• [PATCH v3 3/3] dt-bindings: can: tcan4x5x: Document the wakeup-source flag
  • From: Martin Hundebøll <martin@xxxxxxxxxx>
• [PATCH v3 0/3] can: tcan4x5x: support resume upon rx can frame
  • From: Martin Hundebøll <martin@xxxxxxxxxx>
• [PATCH v3 1/3] can: m_can: allow keeping the transceiver running in suspend
  • From: Martin Hundebøll <martin@xxxxxxxxxx>
• [PATCH v3 2/3] can: tcan4x5x: support resuming from rx interrupt signal
  • From: Martin Hundebøll <martin@xxxxxxxxxx>
• Re: [PATCH v8 2/2] can: esd: add support for esd GmbH PCIe/402 CAN interface family
  • From: Simon Horman <horms@xxxxxxxxxx>
• Re: [PATCH v9 2/2] can: esd: add support for esd GmbH PCIe/402 CAN interface family
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• [PATCH v9 2/2] can: esd: add support for esd GmbH PCIe/402 CAN interface family
  • From: Stefan Mätje <stefan.maetje@xxxxxx>
• [PATCH v9 1/2] MAINTAINERS: add Stefan Mätje as maintainer for the esd electronics GmbH PCIe/402 CAN drivers
  • From: Stefan Mätje <stefan.maetje@xxxxxx>
• [PATCH v9 0/2] can: esd: add support for esd GmbH PCIe/402 CAN interface
  • From: Stefan Mätje <stefan.maetje@xxxxxx>
• Re: [PATCH v8 2/2] can: esd: add support for esd GmbH PCIe/402 CAN interface family
  • From: Stefan Mätje <Stefan.Maetje@xxxxxx>
• Re: [PATCH] can: netlink: Fix TDCO calculation using the old data bittiming
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• PSA: this list has been migrated (no action required)
  • From: Konstantin Ryabitsev <konstantin@xxxxxxxxxxxxxxxxxxx>
• [PATCH] can: netlink: Fix TDCO calculation using the old data bittiming
  • From: Maxime Jayat <maxime.jayat@xxxxxxxxxxxxxxxxx>
• Re: [syzbot] KASAN: use-after-free Read in j1939_session_get_by_addr
  • From: syzbot <syzbot+d9536adc269404a984f8@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 5.10 86/95] can: isotp: isotp_bind(): do not validate unused address information
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5.10 87/95] can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5.10 81/95] can: isotp: set max PDU size to 64 kByte
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5.10 85/95] can: isotp: add local echo tx processing and tx without FC
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5.10 84/95] can: isotp: handle wait_event_interruptible() return values
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5.15 110/128] can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5.15 109/128] can: isotp: isotp_bind(): do not validate unused address information
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5.15 108/128] can: isotp: add local echo tx processing and tx without FC
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5.15 107/128] can: isotp: handle wait_event_interruptible() return values
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5.15 104/128] can: isotp: set max PDU size to 64 kByte
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH stable 5.10 00/10] can: isotp: upgrade to latest 6.1 LTS code base
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 2/2] can: esd: add support for esd GmbH PCIe/402 CAN interface family
  • From: Simon Horman <horms@xxxxxxxxxx>
• [syzbot] [can?] WARNING in j1939_xtp_rx_rts
  • From: syzbot <syzbot+daa36413a5cedf799ae4@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [syzbot] Monthly can report (Nov 2023)
  • From: syzbot <syzbot+list7367dbc4668559b00896@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC] Questionable RCU/BH usage in cgw_create_job().
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [RFC] Questionable RCU/BH usage in cgw_create_job().
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [RFC] Questionable RCU/BH usage in cgw_create_job().
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH stable 5.15 7/7] can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.15 6/7] can: isotp: isotp_bind(): do not validate unused address information
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.15 1/7] can: isotp: set max PDU size to 64 kByte
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.15 3/7] can: isotp: check CAN address family in isotp_bind()
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.15 2/7] can: isotp: isotp_bind(): return -EINVAL on incorrect CAN ID formatting
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.15 5/7] can: isotp: add local echo tx processing and tx without FC
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.15 4/7] can: isotp: handle wait_event_interruptible() return values
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.15 0/7] can: isotp: upgrade to latest 6.1 LTS code base
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.10 08/10] can: isotp: add local echo tx processing and tx without FC
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.10 07/10] can: isotp: handle wait_event_interruptible() return values
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.10 06/10] can: isotp: check CAN address family in isotp_bind()
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.10 10/10] can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.10 01/10] can: isotp: change error format from decimal to symbolic error names
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.10 02/10] can: isotp: add symbolic error message to isotp_module_init()
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.10 09/10] can: isotp: isotp_bind(): do not validate unused address information
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.10 03/10] can: isotp: Add error message if txqueuelen is too small
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.10 00/10] can: isotp: upgrade to latest 6.1 LTS code base
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.10 04/10] can: isotp: set max PDU size to 64 kByte
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.10 05/10] can: isotp: isotp_bind(): return -EINVAL on incorrect CAN ID formatting
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH net-next] net: can: Use device_get_match_data()
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] can: isotp: upgrade 5.15 LTS to latest 6.6 mainline code base
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH] can: isotp: upgrade 5.15 LTS to latest 6.6 mainline code base
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] can: isotp: upgrade 5.15 LTS to latest 6.6 mainline code base
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH] can: isotp: upgrade 5.10 LTS to latest 6.6 mainline code base
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] can: isotp: upgrade 5.15 LTS to latest 6.6 mainline code base
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] can: isotp: upgrade 5.15 LTS to latest 6.6 mainline code base
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH] can: isotp: upgrade 5.10 LTS to latest 6.6 mainline code base
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v8 2/2] can: esd: add support for esd GmbH PCIe/402 CAN interface family
  • From: Stefan Mätje <stefan.maetje@xxxxxx>
• [PATCH v8 0/2] can: esd: add support for esd GmbH PCIe/402 CAN interface
  • From: Stefan Mätje <stefan.maetje@xxxxxx>
• [PATCH v8 1/2] MAINTAINERS: add Stefan Mätje as maintainer for the esd electronics GmbH PCIe/402 CAN drivers
  • From: Stefan Mätje <stefan.maetje@xxxxxx>
• Re: [syzbot] [can?] possible deadlock in j1939_session_activate
  • From: syzbot <syzbot+f32cbede7fd867ce0d56@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2] can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER)
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH AUTOSEL 6.5 16/31] can: flexcan: remove the auto stop mode for IMX93
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: Outstanding latency increase in kernel CAN gateway caught by CANlatester daily builds at 2023-10-02
  • From: Pavel Pisa <pisa@xxxxxxxxxxx>
• Re: [PATCH v6 00/14] can: m_can: Optimizations for m_can/tcan part 2
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• Re: Outstanding latency increase in kernel CAN gateway caught by CANlatester daily builds at 2023-10-02
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [mkl-can-next:rockchip-canfd 21/23] drivers/net/can/rockchip/rockchip_canfd.c:516:13: warning: variable 'cmd' set but not used
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [net-next v3 1/5] netdev: replace simple napi_schedule_prep/__napi_schedule to napi_schedule
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH net 1/6] can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH] libsocketcan: Add new functions to get/set CAN FD bittimings
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH can-next] MAINTAINERS: can: xilinx_can: remove Naga Sureshkumar Relli
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net-next] net: can: Use device_get_match_data()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [net-next v3 3/5] netdev: replace napi_reschedule with napi_schedule
  • From: Tariq Toukan <ttoukan.linux@xxxxxxxxx>
• [PATCH net-next] net: can: Use device_get_match_data()
  • From: Rob Herring <robh@xxxxxxxxxx>
• [net-next v3 5/5] netdev: use napi_schedule bool instead of napi_schedule_prep/__napi_schedule
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next v3 3/5] netdev: replace napi_reschedule with napi_schedule
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next v3 4/5] net: tc35815: rework network interface interrupt logic
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next v3 2/5] netdev: make napi_schedule return bool on NAPI successful schedule
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next v3 1/5] netdev: replace simple napi_schedule_prep/__napi_schedule to napi_schedule
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH net 5/6] can: flexcan: remove the auto stop mode for IMX93
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 1/6] can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 0/6] pull-request: can 2023-10-09
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 4/6] can: sja1000: Always restart the Tx queue after an overrun
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 3/6] arm64: dts: imx93: add the Flex-CAN stop mode by GPR
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 2/6] can: sun4i_can: Only show Kconfig if ARCH_SUNXI is set
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 6/6] can: tcan4x5x: Fix id2_register for tcan4553
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v4 4/4] spi: Use struct_size() helper
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [net-next PATCH v2 4/4] netdev: use napi_schedule bool instead of napi_schedule_prep/__napi_schedule
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• Re: [net-next PATCH v2 4/4] netdev: use napi_schedule bool instead of napi_schedule_prep/__napi_schedule
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH v2 4/4] netdev: use napi_schedule bool instead of napi_schedule_prep/__napi_schedule
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• Re: [net-next PATCH v2 3/4] netdev: replace napi_reschedule with napi_schedule
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• Re: [PATCH net-next 01/37] can: sja1000: Fix comment
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [net-next PATCH v2 3/4] netdev: replace napi_reschedule with napi_schedule
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH v2 4/4] netdev: use napi_schedule bool instead of napi_schedule_prep/__napi_schedule
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH net 1/7] can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER)
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH net-next 16/37] can: at91_can: MMR registers: convert to FIELD_PREP()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 27/37] can: at91_can: at91_poll_err(): fold in at91_poll_err_frame()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 32/37] can: at91_can: at91_irq_err_line(): make use of can_state_get_by_berr_counter()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 28/37] can: at91_can: at91_poll_err(): increase stats even if no quota left or OOM
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 37/37] can: at91_can: switch to rx-offload implementation
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 35/37] can: at91_can: at91_irq_err_line(): send error counters with state change
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 36/37] can: at91_can: at91_alloc_can_err_skb() introduce new function
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 33/37] can: at91_can: at91_irq_err_line(): take reg_sr into account for bus off
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 31/37] can: at91_can: at91_irq_err(): rename to at91_irq_err_line()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 22/37] can: at91_can: rename struct at91_priv::{tx_next,tx_echo} to {tx_head,tx_tail}
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 13/37] can: at91_can: at91_irq_tx(): remove one level of indention
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 19/37] can: at91_can: MCR Register: convert to FIELD_PREP()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 17/37] can: at91_can: MID registers: convert access to FIELD_PREP(), FIELD_GET()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 34/37] can: at91_can: at91_irq_err_line(): make use of can_change_state() and can_bus_off()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 24/37] can: at91_can: at91_chip_start(): don't disable IRQs twice
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 20/37] can: at91_can: add more register definitions
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 29/37] can: at91_can: at91_irq_err_frame(): call directly from IRQ handler
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 26/37] can: at91_can: add CAN transceiver support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 05/37] can: peak_pci: replace deprecated strncpy with strscpy
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 08/37] can: dev: can_restart(): reverse logic to remove need for goto
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 06/37] can: dev: can_restart(): don't crash kernel if carrier is OK
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 14/37] can: at91_can: BR register: convert to FIELD_PREP()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 11/37] can: dev: add can_state_get_by_berr_counter() to return the CAN state based on the current error counters
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 15/37] can: at91_can: ECR register: convert to FIELD_GET()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 07/37] can: dev: can_restart(): fix race condition between controller restart and netif_carrier_on()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 09/37] can: dev: can_restart(): move debug message and stats after successful restart
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 12/37] can: at91_can: use a consistent indention
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 21/37] can: at91_can: at91_setup_mailboxes(): update comments
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 02/37] can: etas_es58x: rework the version check logic to silence -Wformat-truncation
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 30/37] can: at91_can: at91_irq_err_frame(): move next to at91_irq_err()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 23/37] can: at91_can: at91_set_bittiming(): demote register output to debug level
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 18/37] can: at91_can: MSR Register: convert to FIELD_PREP()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 10/37] can: dev: can_put_echo_skb(): don't crash kernel if can_priv::echo_skb is accessed out of bounds
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 04/37] can: raw: Remove NULL check before dev_{put, hold}
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 25/37] can: at91_can: at91_open(): forward request_irq()'s return value in case or an error
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 01/37] can: sja1000: Fix comment
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 0/37] pull-request: can-next 2023-10-05
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 03/37] can: etas_es58x: add missing a blank line after declaration
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 27/27] can: at91_can: switch to rx-offload implementation
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/5] can: dev: can_restart(): update debug and error messages
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/5] can: dev: fix can_restart() and replace BUG_ON() by error handling
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net 1/7] can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER)
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [net-next PATCH v2 1/4] netdev: replace simple napi_schedule_prep/__napi_schedule to napi_schedule
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• Re: [PATCH v2 0/5] can: dev: fix can_restart() and replace BUG_ON() by error handling
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• [PATCH v2 07/27] can: at91_can: MID registers: convert access to FIELD_PREP(), FIELD_GET()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [net-next PATCH v2 3/4] netdev: replace napi_reschedule with napi_schedule
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• Re: [PATCH 27/27] can: at91_can: switch to rx-offload implementation
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• [PATCH v2 27/27] can: at91_can: switch to rx-offload implementation
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [net-next PATCH v2 3/4] netdev: replace napi_reschedule with napi_schedule
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH v2 4/5] can: dev: can_restart(): update debug and error messages
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• [PATCH v2 16/27] can: at91_can: add CAN transceiver support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [net-next PATCH v2 4/4] netdev: use napi_schedule bool instead of napi_schedule_prep/__napi_schedule
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• [PATCH v2 14/27] can: at91_can: at91_chip_start(): don't disable IRQs twice
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 19/27] can: at91_can: at91_irq_err_frame(): call directly from IRQ handler
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [net-next PATCH v2 3/4] netdev: replace napi_reschedule with napi_schedule
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• [PATCH net 4/7] can: sja1000: Always restart the Tx queue after an overrun
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 12/27] can: at91_can: rename struct at91_priv::{tx_next,tx_echo} to {tx_head,tx_tail}
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 5/5] can: dev: can_put_echo_skb(): don't crash kernel if can_priv::echo_skb is accessed out of bounds
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 10/27] can: at91_can: add more register definitions
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 22/27] can: at91_can: at91_irq_err_line(): make use of can_state_get_by_berr_counter()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 03/27] can: at91_can: at91_irq_tx(): remove one level of indention
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 27/27] can: at91_can: switch to rx-offload implementation
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 15/27] can: at91_can: at91_open(): forward request_irq()'s return value in case or an error
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 3/5] can: dev: can_restart(): reverse logic to remove need for goto
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 02/27] can: at91_can: use a consistent indention
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 7/7] can: flexcan: remove the auto stop mode for IMX93
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 2/7] can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 04/27] can: at91_can: BR register: convert to FIELD_PREP()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 26/27] can: at91_can: at91_alloc_can_err_skb() introduce new function
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: peak_pci: replace deprecated strncpy with strscpy
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 06/27] can: at91_can: MMR registers: convert to FIELD_PREP()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 09/27] can: at91_can: MCR Register: convert to FIELD_PREP()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 05/27] can: at91_can: ECR register: convert to FIELD_GET()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 4/5] can: dev: can_restart(): update debug and error messages
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 01/27] can: dev: add can_state_get_by_berr_counter() to return the CAN state based on the current error counters
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 11/27] can: at91_can: at91_setup_mailboxes(): update comments
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 0/5] can: dev: fix can_restart() and replace BUG_ON() by error handling
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 3/7] can: sun4i_can: Only show Kconfig if ARCH_SUNXI is set
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 1/5] can: dev: can_restart(): don't crash kernel if carrier is OK
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 20/27] can: at91_can: at91_irq_err_frame(): move next to at91_irq_err()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 24/27] can: at91_can: at91_irq_err_line(): make use of can_change_state() and can_bus_off()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 0/7] pull-request: can 2023-10-05
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 1/7] can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER)
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 00/27] can: at91: add can_state_get_by_berr_counter() helper, cleanup and convert to rx_offload
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 13/27] can: at91_can: at91_set_bittiming(): demote register output to debug level
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 5/7] can: tcan4x5x: Fix id2_register for tcan4553
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 2/5] can: dev: can_restart(): fix race condition between controller restart and netif_carrier_on()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 17/27] can: at91_can: at91_poll_err(): fold in at91_poll_err_frame()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 6/7] arm64: dts: imx93: add the Flex-CAN stop mode by GPR
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 21/27] can: at91_can: at91_irq_err(): rename to at91_irq_err_line()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 18/27] can: at91_can: at91_poll_err(): increase stats even if no quota left or OOM
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: peak_pci: replace deprecated strncpy with strscpy
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH v2 23/27] can: at91_can: at91_irq_err_line(): take reg_sr into account for bus off
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 08/27] can: at91_can: MSR Register: convert to FIELD_PREP()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 25/27] can: at91_can: at91_irq_err_line(): send error counters with state change
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] can: peak_pci: replace deprecated strncpy with strscpy
  • From: Justin Stitt <justinstitt@xxxxxxxxxx>
• Re: [PATCH 27/27] can: at91_can: switch to rx-offload implementation
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 27/27] can: at91_can: switch to rx-offload implementation
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [PATCH 27/27] can: at91_can: switch to rx-offload implementation
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 4/5] can: dev: can_restart(): update debug and error messages
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 4/5] can: dev: can_restart(): update debug and error messages
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [PATCH 27/27] can: at91_can: switch to rx-offload implementation
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [PATCH 4/5] can: dev: can_restart(): update debug and error messages
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 01/27] can: dev: add can_state_get_by_berr_counter() to return the CAN state based on the current error counters
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 4/5] can: dev: can_restart(): update debug and error messages
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 01/27] can: dev: add can_state_get_by_berr_counter() to return the CAN state based on the current error counters
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [PATCH 4/5] can: dev: can_restart(): update debug and error messages
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [PATCH] can: raw: Remove NULL check before dev_{put, hold}
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: sun4i_can: Only show Kconfig if ARCH_SUNXI is set
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: tcan4x5x: Fix id2_register for tcan4553
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/2] can: etas_es58x: clean-up of new GCC W=1 and old checkpath warnings
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v1] can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER)
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net-next] can: sja1000: Fix comment
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2] can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v3] can: sja1000: Always restart the Tx queue after an overrun
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v3] can: sja1000: Always restart the Tx queue after an overrun
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 21/27] can: at91_can: at91_irq_err(): rename to at91_irq_err_line()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 27/27] can: at91_can: switch to rx-offload implementation
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 23/27] can: at91_can: at91_irq_err_line(): take reg_sr into account for bus off
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 26/27] can: at91_can: at91_alloc_can_err_skb() introduce new function
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 24/27] can: at91_can: at91_irq_err_line(): make use of can_change_state() and can_bus_off()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 20/27] can: at91_can: at91_irq_err_frame(): move next to at91_irq_err()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 22/27] can: at91_can: at91_irq_err_line(): make use of can_state_get_by_berr_counter()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 25/27] can: at91_can: at91_irq_err_line(): send error counters with state change
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 18/27] can: at91_can: at91_poll_err(): increase stats even if no quota left or OOM
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 19/27] can: at91_can: at91_irq_err_frame(): call directly from IRQ handler
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 16/27] can: at91_can: add CAN transceiver support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 13/27] can: at91_can: at91_set_bittiming(): demote register output to debug level
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 15/27] can: at91_can: at91_open(): forward request_irq()'s return value in case or an error
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 14/27] can: at91_can: at91_chip_start(): don't disable IRQs twice
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 11/27] can: at91_can: at91_setup_mailboxes(): update comments
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 17/27] can: at91_can: at91_poll_err(): fold in at91_poll_err_frame()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 12/27] can: at91_can: rename struct at91_priv::{tx_next,tx_echo} to {tx_head,tx_tail}
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 07/27] can: at91_can: MID registers: convert access to FIELD_PREP(), FIELD_GET()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 10/27] can: at91_can: add more register definitions
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 04/27] can: at91_can: BR register: convert to FIELD_PREP()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 08/27] can: at91_can: MSR Register: convert to FIELD_PREP()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 00/27] can: at91: add can_state_get_by_berr_counter() helper, cleanup and convert to rx_offload
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 02/27] can: at91_can: use a consistent indention
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 03/27] can: at91_can: at91_irq_tx(): remove one level of indention
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 05/27] can: at91_can: ECR register: convert to FIELD_GET()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 01/27] can: dev: add can_state_get_by_berr_counter() to return the CAN state based on the current error counters
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 06/27] can: at91_can: MMR registers: convert to FIELD_PREP()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 09/27] can: at91_can: MCR Register: convert to FIELD_PREP()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 1/5] can: dev: can_restart(): don't crash kernel if carrier is OK
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 0/5] can: dev: fix can_restart() and replace BUG_ON() by error handling
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 4/5] can: dev: can_restart(): update debug and error messages
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 5/5] can: dev: can_put_echo_skb(): don't crash kernel if can_priv::echo_skb is accessed out of bounds
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 2/5] can: dev: can_restart(): fix race condition between controller restart and netif_carrier_on()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 3/5] can: dev: can_restart(): reverse logic to remove need for goto
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [net-next PATCH v2 3/4] netdev: replace napi_reschedule with napi_schedule
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v2 2/4] netdev: make napi_schedule return bool on NAPI successful schedule
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v2 1/4] netdev: replace simple napi_schedule_prep/__napi_schedule to napi_schedule
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v2 4/4] netdev: use napi_schedule bool instead of napi_schedule_prep/__napi_schedule
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH] libsocketcan: Add new functions to get/set CAN FD bittimings
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v2] can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [net-next PATCH 3/4] netdev: replace napi_reschedule with napi_schedule
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [net-next PATCH 3/4] netdev: replace napi_reschedule with napi_schedule
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH 2/4] netdev: make napi_schedule return bool on NAPI successful schedule
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH 3/4] netdev: replace napi_reschedule with napi_schedule
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [net-next PATCH 2/4] netdev: make napi_schedule return bool on NAPI successful schedule
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• Re: [net-next PATCH 1/4] netdev: replace simple napi_schedule_prep/__napi_schedule to napi_schedule
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [net-next PATCH 3/4] netdev: replace napi_reschedule with napi_schedule
  • From: Nick Child <nnac123@xxxxxxxxxxxxx>
• Re: [net-next PATCH 3/4] netdev: replace napi_reschedule with napi_schedule
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [net-next PATCH 2/4] netdev: make napi_schedule return bool on NAPI successful schedule
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• [PATCH v3] can: sja1000: Always restart the Tx queue after an overrun
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [net-next PATCH 3/4] netdev: replace napi_reschedule with napi_schedule
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH 2/4] netdev: make napi_schedule return bool on NAPI successful schedule
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH 4/4] netdev: use napi_schedule bool instead of napi_schedule_prep/__napi_schedule
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH 1/4] netdev: replace simple napi_schedule_prep/__napi_schedule to napi_schedule
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v2] can: sja1000: Always restart the Tx queue after an overrun
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [syzbot] Monthly can report (Sep 2023)
  • From: syzbot <syzbot+list80422fea79f8c83e326e@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Outstanding latency increase in kernel CAN gateway caught by CANlatester daily builds at 2023-10-02
  • From: Pavel Pisa <pisa@xxxxxxxxxxx>
• Re: [PATCH net-next] can: sja1000: Fix comment
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v6 07/14] can: m_can: Add tx coalescing ethtool support
  • From: Simon Horman <horms@xxxxxxxxxx>
• Re: [PATCH v6 06/14] can: m_can: Add rx coalescing ethtool support
  • From: Simon Horman <horms@xxxxxxxxxx>
• Re: [PATCH v6 05/14] can: m_can: Implement transmit coalescing
  • From: Simon Horman <horms@xxxxxxxxxx>
• Re: [PATCH v6 04/14] can: m_can: Implement receive coalescing
  • From: Simon Horman <horms@xxxxxxxxxx>
• Re: [PATCH v6 02/14] can: m_can: Move hrtimer init to m_can_class_register
  • From: Simon Horman <horms@xxxxxxxxxx>
• Re: [PATCH v6 01/14] can: m_can: Start/Cancel polling timer together with interrupts
  • From: Simon Horman <horms@xxxxxxxxxx>
• Re: [PATCH v2 2/2] can: tcan4x5x: support resuming from rx interrupt signal
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] can: m_can: allow keeping the transceiver running in suspend
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v6 13/14] can: m_can: Implement BQL
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v6 14/14] can: m_can: Implement transmit submission coalescing
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v6 12/14] can: m_can: Use tx_fifo_in_flight for netif_queue control
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v6 07/14] can: m_can: Add tx coalescing ethtool support
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v6 04/14] can: m_can: Implement receive coalescing
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v6 09/14] can: m_can: Cache tx putidx
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v6 11/14] can: m_can: Introduce a tx_fifo_in_flight counter
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v6 05/14] can: m_can: Implement transmit coalescing
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v6 03/14] can: m_can: Write transmit header and data in one transaction
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v6 10/14] can: m_can: Use the workqueue as queue
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v6 02/14] can: m_can: Move hrtimer init to m_can_class_register
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v6 08/14] can: m_can: Use u32 for putidx
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v6 06/14] can: m_can: Add rx coalescing ethtool support
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v6 01/14] can: m_can: Start/Cancel polling timer together with interrupts
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v6 00/14] can: m_can: Optimizations for m_can/tcan part 2
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• Re: [PATCH net-next] can: sja1000: Fix comment
  • From: Simon Horman <horms@xxxxxxxxxx>
• Re: [PATCH v2] can: sja1000: Always restart the Tx queue after an overrun
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v1] can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER)
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2] can: sja1000: Always restart the Tx queue after an overrun
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH net] can: sja1000: Always restart the Tx queue after an overrun
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v1] can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER)
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH net] can: sja1000: Always restart the Tx queue after an overrun
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net] can: sja1000: Always restart the Tx queue after an overrun
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: IXXAT CAN-IB2XX drivers
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• IXXAT CAN-IB2XX drivers
  • From: Eric Stahl <ericstahl@xxxxxxxxxxxx>
• [PATCH v3 2/2] can: etas_es58x: add missing a blank line after declaration
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v3 1/2] can: etas_es58x: rework the version check logic to silence -Wformat-truncation
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v3 0/2] can: etas_es58x: clean-up of new GCC W=1 and old checkpath warnings
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH net-next] can: sja1000: Fix comment
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH net] can: sja1000: Always restart the Tx queue after an overrun
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH] can: tcan4x5x: Fix id2_register for tcan4553
  • From: Simon Horman <horms@xxxxxxxxxx>
• [PATCH] can: m_can: don't enable transceiver when probing
  • From: Martin Hundebøll <martin@xxxxxxxxxx>
• [PATCH v2 2/2] can: tcan4x5x: support resuming from rx interrupt signal
  • From: Martin Hundebøll <martin@xxxxxxxxxx>
• [PATCH v2 1/2] can: m_can: allow keeping the transceiver running in suspend
  • From: Martin Hundebøll <martin@xxxxxxxxxx>
• [PATCH] can: tcan4x5x: Fix id2_register for tcan4553
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• Re: [PATCH v3 5/6] can: tcan4x5x: Add support for tcan4552/4553
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• Re: [PATCH] can: sun4i_can: Only show Kconfig if ARCH_SUNXI is set
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH v3 5/6] can: tcan4x5x: Add support for tcan4552/4553
  • From: Sean Anderson <sean.anderson@xxxxxxxx>
• [PATCH v2 2/2] can: etas_es58x: add missing a blank line after declaration
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v2 1/2] can: etas_es58x: rework the version check logic to silence -Wformat-truncation
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v2 0/2] can: etas_es58x: clean-up of new GCC W=1 and old checkpath warnings
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v1 2/2] can: etas_es58x: add missing a blank line after declaration
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v1 1/2] can: etas_es58x: silence -Wformat-truncation
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v1 0/2] can: etas_es58x: clean-up of new GCC W=1 and old checkpath warnings
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• Re: etas_es58x warnings with gcc-13
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• etas_es58x warnings with gcc-13
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] can: tcan4x5x: support resuming from rx interrupt signal
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] can: m_can: allow keeping the transceiver running in suspend
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 1/2] can: m_can: allow keeping the transceiver running in suspend
  • From: Martin Hundebøll <martin@xxxxxxxxxx>
• [PATCH 2/2] can: tcan4x5x: support resuming from rx interrupt signal
  • From: Martin Hundebøll <martin@xxxxxxxxxx>
• Re: [PATCH v4 3/3] can: xilinx_can: Add ethtool stats interface for ECC errors
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH AUTOSEL 6.1 10/26] can: sun4i_can: Add support for the Allwinner D1
  • From: Pavel Machek <pavel@xxxxxxx>
• [PATCH AUTOSEL 6.1 09/26] can: sun4i_can: Add acceptance register quirk
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 10/26] can: sun4i_can: Add support for the Allwinner D1
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.4 12/41] can: sun4i_can: Add support for the Allwinner D1
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.4 11/41] can: sun4i_can: Add acceptance register quirk
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.5 14/45] can: sun4i_can: Add support for the Allwinner D1
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.5 13/45] can: sun4i_can: Add acceptance register quirk
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH] can: sun4i_can: Only show Kconfig if ARCH_SUNXI is set
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] can: sun4i_can: Only show Kconfig if ARCH_SUNXI is set
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH] of: overlay: Fix of_overlay_fdt_apply prototype when !CONFIG_OF_OVERLAY
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 3/3] can: xilinx_can: Add ethtool stats interface for ECC errors
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] can: xilinx_can: Add ECC support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v4 1/3] dt-bindings: can: xilinx_can: Add ECC property 'xlnx,has-ecc'
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] of: overlay: Fix of_overlay_fdt_apply prototype when !CONFIG_OF_OVERLAY
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] of: overlay: Fix of_overlay_fdt_apply prototype when !CONFIG_OF_OVERLAY
  • From: Pavel Pisa <pisa@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 00/12] can: m_can: Optimizations for m_can/tcan part 2
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• Re: [PATCH v2 0/4] Add support for Allwinner D1 CAN controllers
  • From: patchwork-bot+linux-riscv@xxxxxxxxxx
• Re: [PATCH] can: etas_es58x: Add check for alloc_can_err_skb
  • From: Denis Kirjanov <dkirjanov@xxxxxxx>
• Re: [PATCH] can: etas_es58x: Add check for alloc_can_err_skb
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• [PATCH v4 3/3] can: xilinx_can: Add ethtool stats interface for ECC errors
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [PATCH v4 2/3] can: xilinx_can: Add ECC support
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [PATCH v4 1/3] dt-bindings: can: xilinx_can: Add ECC property 'xlnx,has-ecc'
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [PATCH v4 0/3] can: xilinx_can: Add ECC feature support
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [PATCH] can: etas_es58x: Add check for alloc_can_err_skb
  • From: Jiasheng Jiang <jiasheng@xxxxxxxxxxx>
• RE: [PATCH v3 1/3] dt-bindings: can: xilinx_can: Add ECC property 'xlnx,has-ecc'
  • From: "Goud, Srinivas" <srinivas.goud@xxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: can: xilinx_can: Add ECC property 'xlnx,has-ecc'
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• RE: [PATCH v3 1/3] dt-bindings: can: xilinx_can: Add ECC property 'xlnx,has-ecc'
  • From: "Goud, Srinivas" <srinivas.goud@xxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: can: xilinx_can: Add ECC property 'xlnx,has-ecc'
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3 3/3] can: xilinx_can: Add ethtool stats interface for ECC errors
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [PATCH v3 1/3] dt-bindings: can: xilinx_can: Add ECC property 'xlnx,has-ecc'
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [PATCH v3 2/3] can: xilinx_can: Add ECC support
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [PATCH v3 0/3] can: xilinx_can: Add ECC feature support
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• Re: [PATCH v2] can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v2] can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior
  • From: Lukas Magel <lukas.magel@xxxxxxxxxx>
• Re: [PATCH] can: raw: Remove NULL check before dev_{put, hold}
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH] can: raw: Remove NULL check before dev_{put, hold}
  • From: Jiapeng Chong <jiapeng.chong@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v5 00/12] can: m_can: Optimizations for m_can/tcan part 2
  • From: Martin Hundebøll <martin@xxxxxxxxxx>
• Re: [PATCH v2 4/4] can: sun4i_can: Add support for the Allwinner D1
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [NET 0/2] CAN fixes for 6.5-rc7
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [NET 2/2] can: raw: add missing refcount for memory leak fix
  • From: Simon Horman <horms@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: can: xilinx_can: Add ECC property ‘xlnx,has-ecc’
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [NET 2/2] can: raw: add missing refcount for memory leak fix
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: can: isotp: epoll breaks isotp_sendmsg
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v2 4/4] can: sun4i_can: Add support for the Allwinner D1
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] can: xilinx_can: Add ethtool stats interface for ECC errors
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [PATCH v2 2/3] can: xilinx_can: Add ECC support
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [PATCH v2 1/3] dt-bindings: can: xilinx_can: Add ECC property ‘xlnx,has-ecc’
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [PATCH v2 0/3] can: xilinx_can: Add ECC feature support
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• Re: [PATCH net] net: validate veth and vxcan peer ifindexes
  • From: Ido Schimmel <idosch@xxxxxxxxxx>
• Re: [NET 2/2] can: raw: add missing refcount for memory leak fix
  • From: Simon Horman <horms@xxxxxxxxxx>
• Re: can: isotp: epoll breaks isotp_sendmsg
  • From: Lukas Magel <lukas.magel@xxxxxxxxxx>
• Re: [PATCH net] net: validate veth and vxcan peer ifindexes
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH 1/2] can: netlink: support setting hardware filters
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• [NET 2/2] can: raw: add missing refcount for memory leak fix
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [NET 0/2] CAN fixes for 6.5-rc7
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [NET 1/2] can: isotp: fix support for transmission of SF without flow control
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: can: isotp: epoll breaks isotp_sendmsg
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH 1/2] can: netlink: support setting hardware filters
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH net] net: validate veth and vxcan peer ifindexes
  • From: Ido Schimmel <idosch@xxxxxxxxxx>
• Re: [PATCH net] net: validate veth and vxcan peer ifindexes
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH 1/2] can: netlink: support setting hardware filters
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [PATCH 1/2] can: netlink: support setting hardware filters
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [PATCH net] net: validate veth and vxcan peer ifindexes
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• [PATCH net] net: validate veth and vxcan peer ifindexes
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: can: isotp: epoll breaks isotp_sendmsg
  • From: Lukas Magel <lukas.magel@xxxxxxxxxx>
• [PATCH] can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior
  • From: Lukas Magel <lukas.magel@xxxxxxxxxx>
• Re: [PATCH 1/2] can: netlink: support setting hardware filters
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• [PATCH] can: ip: support hw-filter setting
  • From: Martin Hundebøll <martin@xxxxxxxxxx>
• Re: [PATCH 0/2] can: per-device hardware filter support
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH 0/2] can: per-device hardware filter support
  • From: Martin Hundebøll <martin@xxxxxxxxxx>
• [PATCH 2/2] can: m_can: support setting hw filters
  • From: Martin Hundebøll <martin@xxxxxxxxxx>
• [PATCH 1/2] can: netlink: support setting hardware filters
  • From: Martin Hundebøll <martin@xxxxxxxxxx>
• Re: [PATCH] libsocketcan: Add new functions to get/set CAN FD bittimings
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [RFC PATCH] can: raw: add missing refcount for memory leak fix
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH] can: raw: add missing refcount for memory leak fix
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: can: isotp: epoll breaks isotp_sendmsg
  • From: Lukas Magel <lukas.magel@xxxxxxxxxx>
• Re: possible deadlock in raw_setsockopt
  • From: Yikebaer Aizezi <yikebaer61@xxxxxxxxx>
• Re: possible deadlock in raw_setsockopt
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH 14/36] tty: can327, move overflow test inside can327_ldisc_rx()'s loop
  • From: Max Staudt <max@xxxxxxxxx>
• Re: [PATCH 13/36] tty: can327: unify error paths in can327_ldisc_rx()
  • From: Max Staudt <max@xxxxxxxxx>
• possible deadlock in raw_setsockopt
  • From: Yikebaer Aizezi <yikebaer61@xxxxxxxxx>
• Re: [PATCH v5 00/12] can: m_can: Optimizations for m_can/tcan part 2
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH 13/36] tty: can327: unify error paths in can327_ldisc_rx()
  • From: "Jiri Slaby (SUSE)" <jirislaby@xxxxxxxxxx>
• [PATCH 14/36] tty: can327, move overflow test inside can327_ldisc_rx()'s loop
  • From: "Jiri Slaby (SUSE)" <jirislaby@xxxxxxxxxx>
• Re: Re: [syzbot] KASAN: use-after-free Read in j1939_session_get_by_addr
  • From: Aleksandr Nogikh <nogikh@xxxxxxxxxx>
• Re: [syzbot] KASAN: use-after-free Read in j1939_session_get_by_addr
  • From: syzbot <syzbot+d9536adc269404a984f8@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH net-next] Revert "riscv: dts: allwinner: d1: Add CAN controller nodes"
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH net-next] Revert "riscv: dts: allwinner: d1: Add CAN controller nodes"
  • From: Jernej Škrabec <jernej.skrabec@xxxxxxxxx>
• [PATCH net-next] Revert "riscv: dts: allwinner: d1: Add CAN controller nodes"
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 0/1] pull-request: can-next 2023-08-07
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] Revert "riscv: dts: allwinner: d1: Add CAN controller nodes"
  • From: Jernej Škrabec <jernej.skrabec@xxxxxxxxx>
• Re: [PATCH v2 2/4] riscv: dts: allwinner: d1: Add CAN controller nodes
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] Revert "riscv: dts: allwinner: d1: Add CAN controller nodes"
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] riscv: dts: allwinner: d1: Add CAN controller nodes
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: j1939: prevent deadlock by changing j1939_socks_lock to rwlock
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] riscv: dts: allwinner: d1: Add CAN controller nodes
  • From: Jernej Škrabec <jernej.skrabec@xxxxxxxxx>
• Re: [PATCH v2 2/4] riscv: dts: allwinner: d1: Add CAN controller nodes
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH v2 2/4] riscv: dts: allwinner: d1: Add CAN controller nodes
  • From: Jernej Škrabec <jernej.skrabec@xxxxxxxxx>
• Re: [PATCH v2 2/4] riscv: dts: allwinner: d1: Add CAN controller nodes
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH v2 2/4] riscv: dts: allwinner: d1: Add CAN controller nodes
  • From: Maksim Kiselev <bigunclemax@xxxxxxxxx>
• Re: [RFC PATCH] can: raw: add missing refcount for memory leak fix
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• Re: [RFC PATCH] can: raw: add missing refcount for memory leak fix
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [RFC PATCH] can: raw: add missing refcount for memory leak fix
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• Re: [PATCH net v3] can: raw: fix receiver memory leak
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [RFC PATCH] can: raw: add missing refcount for memory leak fix
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH net-next 1/9] can: flexcan: fix the return value handle for platform_get_irq()
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH v3 1/2] arm64: dts: imx93: add the Flex-CAN stop mode by GPR
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 0/1] can: esd_usb: Add support for esd CAN-USB/3
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 6/9] can: tcan4x5x: Add support for tcan4552/4553
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 9/9] can: esd_usb: Add support for esd CAN-USB/3
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 8/9] can: c_can: Do not check for 0 return after calling platform_get_irq()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 7/9] can: tcan4x5x: Add error messages in probe
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 5/9] can: tcan4x5x: Rename ID registers to match datasheet
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 4/9] can: tcan4x5x: Check size of mram configuration
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 0/9] pull-request: can-next 2023-08-03
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 1/9] can: flexcan: fix the return value handle for platform_get_irq()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 3/9] can: tcan4x5x: Remove reserved register 0x814 from writable table
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 2/9] dt-bindings: can: tcan4x5x: Add tcan4552 and tcan4553 variants
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net v3] can: raw: fix receiver memory leak
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• Re: [PATCH 2/2] net: nfc: remove casts from tty->disc_data
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] net: nfc: remove casts from tty->disc_data
  • From: Jiri Slaby <jirislaby@xxxxxxxxxx>
• Re: [PATCH net v3] can: raw: fix receiver memory leak
  • From: "Ziyang Xuan (William)" <william.xuanziyang@xxxxxxxxxx>
• Re: [PATCH 2/2] net: nfc: remove casts from tty->disc_data
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH net v3] can: raw: fix receiver memory leak
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• Re: [PATCH 1/1] can: esd_usb: Add support for esd CAN-USB/3
  • From: Simon Horman <horms@xxxxxxxxxx>
• Re: [PATCH net-next] can: c_can: Do not check for 0 return after calling platform_get_irq()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next] can: c_can: Do not check for 0 return after calling platform_get_irq()
  • From: Ruan Jinjie <ruanjinjie@xxxxxxxxxx>
• Re: [PATCH 2/2] net: nfc: remove casts from tty->disc_data
  • From: Max Staudt <max@xxxxxxxxx>
• Re: [PATCH 1/2] can: can327: remove casts from tty->disc_data
  • From: Max Staudt <max@xxxxxxxxx>
• Re: [PATCH 2/2] net: nfc: remove casts from tty->disc_data
  • From: Simon Horman <horms@xxxxxxxxxx>
• Re: [PATCH 1/2] can: can327: remove casts from tty->disc_data
  • From: Simon Horman <horms@xxxxxxxxxx>
• [PATCH 2/2] net: nfc: remove casts from tty->disc_data
  • From: "Jiri Slaby (SUSE)" <jirislaby@xxxxxxxxxx>
• [PATCH 1/2] can: can327: remove casts from tty->disc_data
  • From: "Jiri Slaby (SUSE)" <jirislaby@xxxxxxxxxx>
• Re: [PATCH v4 0/6] can: tcan4x5x: Introduce tcan4552/4553
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• Re: [PATCH v4 0/6] can: tcan4x5x: Introduce tcan4552/4553
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 05/10] can: slcan: remove casts from tty->disc_data
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH -next] can: flexcan: fix the return value handle for platform_get_irq()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 05/10] can: slcan: remove casts from tty->disc_data
  • From: "Jiri Slaby (SUSE)" <jirislaby@xxxxxxxxxx>
• [PATCH -next] can: flexcan: fix the return value handle for platform_get_irq()
  • From: Ruan Jinjie <ruanjinjie@xxxxxxxxxx>
• Re: [PATCH v2 2/4] riscv: dts: allwinner: d1: Add CAN controller nodes
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH v2 2/4] riscv: dts: allwinner: d1: Add CAN controller nodes
  • From: Jernej Škrabec <jernej.skrabec@xxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: can: tcan4x5x: Add tcan4552 and tcan4553 variants
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 1/1] can: esd_usb: Add support for esd CAN-USB/3
  • From: Frank Jungclaus <frank.jungclaus@xxxxxx>
• [PATCH 0/1] can: esd_usb: Add support for esd CAN-USB/3
  • From: Frank Jungclaus <frank.jungclaus@xxxxxx>
• [PATCH v4 6/6] can: tcan4x5x: Add error messages in probe
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v4 2/6] can: tcan4x5x: Remove reserved register 0x814 from writable table
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v4 3/6] can: tcan4x5x: Check size of mram configuration
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v4 1/6] dt-bindings: can: tcan4x5x: Add tcan4552 and tcan4553 variants
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v4 4/6] can: tcan4x5x: Rename ID registers to match datasheet
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v4 5/6] can: tcan4x5x: Add support for tcan4552/4553
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v4 0/6] can: tcan4x5x: Introduce tcan4552/4553
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• Re: [PATCH net-next 01/21] dt-bindings: net: can: Add support for Allwinner D1 CAN controller
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• [PATCH net-next 19/21] can: rx-offload: rename rx_offload_get_echo_skb() -> can_rx_offload_get_echo_skb_queue_timestamp()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 0/21] pull-request: can-next 2023-07-28
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 06/21] can: peak_usb: remove unused/legacy peak_usb_netif_rx() function
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 05/21] can: sun4i_can: Add support for the Allwinner D1
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 01/21] dt-bindings: net: can: Add support for Allwinner D1 CAN controller
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 02/21] riscv: dts: allwinner: d1: Add CAN controller nodes
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 07/21] can: Explicitly include correct DT includes, part 2
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 13/21] can: gs_usb: gs_usb_receive_bulk_callback(): make use of stats
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 14/21] can: gs_usb: gs_usb_receive_bulk_callback(): count RX overflow errors also in case of OOM
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 11/21] can: gs_usb: uniformly use "parent" as variable name for struct gs_usb
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 12/21] can: gs_usb: gs_usb_receive_bulk_callback(): make use of netdev
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 21/21] can: gs_usb: convert to NAPI/rx-offload to avoid OoO reception
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 10/21] can: gs_usb: gs_usb_set_timestamp(): remove return statements form void function
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 09/21] can: gs_usb: gs_usb_probe(): align block comment
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 17/21] can: gs_usb: gs_destroy_candev(): remove not needed usb_kill_anchored_urbs()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 16/21] can: gs_usb: gs_can_close(): don't complain about failed device reset during ndo_stop
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 15/21] can: gs_usb: gs_can_start_xmit(), gs_can_open(): clean up printouts in error path
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 08/21] can: gs_usb: remove leading space from goto labels
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 04/21] MAINTAINERS: Add myself as maintainer of the ems_pci.c driver
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 20/21] can: rx-offload: add can_rx_offload_get_echo_skb_queue_tail()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 18/21] can: gs_usb: gs_usb_disconnect(): remove not needed usb_kill_anchored_urbs()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 03/21] can: sun4i_can: Add acceptance register quirk
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] can: ems_pci: move ASIX AX99100 ids to pci_ids.h
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] parport_pc: add support for ASIX AX99100
  • From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
• Re: [PATCH v2 2/2] can: ems_pci: move ASIX AX99100 ids to pci_ids.h
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 2/2] can: flexcan: remove the auto stop mode for IMX93
  • From: haibo.chen@xxxxxxx
• [PATCH v3 1/2] arm64: dts: imx93: add the Flex-CAN stop mode by GPR
  • From: haibo.chen@xxxxxxx
• Re: RE: [PATCH v2 1/3] arm64: dts: imx93: add the Flex-CAN stop mode by GPR
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• RE: [PATCH v2 3/3] can: flexcan: lack of stop mode dts properity should not block driver probe
  • From: Bough Chen <haibo.chen@xxxxxxx>
• RE: [PATCH v2 1/3] arm64: dts: imx93: add the Flex-CAN stop mode by GPR
  • From: Bough Chen <haibo.chen@xxxxxxx>
• Re: [PATCH v2 3/3] can: flexcan: lack of stop mode dts properity should not block driver probe
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] arm64: dts: imx93: add the Flex-CAN stop mode by GPR
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] can: flexcan: lack of stop mode dts properity should not block driver probe
  • From: haibo.chen@xxxxxxx
• [PATCH v2 2/3] can: flexcan: remove the auto stop mode for IMX93
  • From: haibo.chen@xxxxxxx
• [PATCH v2 1/3] arm64: dts: imx93: add the Flex-CAN stop mode by GPR
  • From: haibo.chen@xxxxxxx
• RE: [PATCH 2/2] can: flexcan: remove the auto stop mode for IMX93
  • From: Bough Chen <haibo.chen@xxxxxxx>
• Re: [PATCH 2/2] can: flexcan: remove the auto stop mode for IMX93
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 2/2] can: flexcan: remove the auto stop mode for IMX93
  • From: haibo.chen@xxxxxxx
• [PATCH 1/2] arm64: dts: imx93: add the Flex-CAN stop mode by GPR
  • From: haibo.chen@xxxxxxx
• Re: [syzbot] KASAN: use-after-free Read in j1939_session_get_by_addr
  • From: syzbot <syzbot+d9536adc269404a984f8@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] can: Explicitly include correct DT includes, part 2
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net 1/2] can: gs_usb: gs_can_close(): add missing set of CAN state to CAN_STATE_STOPPED
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• [PATCH v2] can: Explicitly include correct DT includes, part 2
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH net 1/2] can: gs_usb: gs_can_close(): add missing set of CAN state to CAN_STATE_STOPPED
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 2/2] can: raw: fix lockdep issue in raw_release()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 0/2] pull-request: can 2023-07-24
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net] can: raw: fix lockdep issue in raw_release()
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH net] can: raw: fix lockdep issue in raw_release()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 6/6] can: tcan4x5x: Add error messages in probe
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• Re: RE: [PATCH 2/3] can: xilinx_can: Add ECC support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v3 4/4] parport_pc: add support for ASIX AX99100
  • From: Jiaqing Zhao <jiaqing.zhao@xxxxxxxxxxxxxxx>
• [PATCH v3 2/4] can: ems_pci: move ASIX AX99100 ids to pci_ids.h
  • From: Jiaqing Zhao <jiaqing.zhao@xxxxxxxxxxxxxxx>
• [PATCH v3 1/4] can: ems_pci: remove PCI_SUBVENDOR_ID_ASIX definition
  • From: Jiaqing Zhao <jiaqing.zhao@xxxxxxxxxxxxxxx>
• [PATCH v3 3/4] serial: 8250_pci: add support for ASIX AX99100
  • From: Jiaqing Zhao <jiaqing.zhao@xxxxxxxxxxxxxxx>
• [PATCH v3 0/4] add support for ASIX AX99100
  • From: Jiaqing Zhao <jiaqing.zhao@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 6/6] can: tcan4x5x: Add error messages in probe
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/4] Add support for Allwinner D1 CAN controllers
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] can: ems_pci: move ASIX AX99100 ids to pci_ids.h
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v1] can: peak_usb: remove unused/legacy peak_usb_netif_rx() function
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] can: ems_pci: move ASIX AX99100 ids to pci_ids.h
  • From: Jiaqing Zhao <jiaqing.zhao@xxxxxxxxxxxxxxx>
• Re: [PATCH] can: j1939: prevent deadlock by changing j1939_socks_lock to rwlock
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] riscv: dts: allwinner: d1: Add CAN controller nodes
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: net: can: Add support for Allwinner D1 CAN controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 4/4] can: sun4i_can: Add support for the Allwinner D1
  • From: John Watts <contact@xxxxxxxxxx>
• [PATCH v2 3/4] can: sun4i_can: Add acceptance register quirk
  • From: John Watts <contact@xxxxxxxxxx>
• [PATCH v2 2/4] riscv: dts: allwinner: d1: Add CAN controller nodes
  • From: John Watts <contact@xxxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: net: can: Add support for Allwinner D1 CAN controller
  • From: John Watts <contact@xxxxxxxxxx>
• [PATCH v2 0/4] Add support for Allwinner D1 CAN controllers
  • From: John Watts <contact@xxxxxxxxxx>
• [PATCH v1] can: peak_usb: remove unused/legacy peak_usb_netif_rx() function
  • From: Peter Seiderer <ps.report@xxxxxxx>
• [PATCH v3 6/6] can: tcan4x5x: Add error messages in probe
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v3 5/6] can: tcan4x5x: Add support for tcan4552/4553
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v3 4/6] can: tcan4x5x: Rename ID registers to match datasheet
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v3 3/6] can: tcan4x5x: Check size of mram configuration
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v3 2/6] can: tcan4x5x: Remove reserved register 0x814 from writable table
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v3 1/6] dt-bindings: can: tcan4x5x: Add tcan4552 and tcan4553 variants
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v3 0/6] can: tcan4x5x: Introduce tcan4552/4553
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• Re: [PATCH v5 12/12] can: m_can: Implement transmit submission coalescing
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• RE: [PATCH 2/3] can: xilinx_can: Add ECC support
  • From: "Goud, Srinivas" <srinivas.goud@xxxxxxx>
• Re: [PATCH v5 12/12] can: m_can: Implement transmit submission coalescing
  • From: Simon Horman <simon.horman@xxxxxxxxxxxx>
• Re: [PATCH v5 10/12] can: m_can: Use tx_fifo_in_flight for netif_queue control
  • From: Simon Horman <simon.horman@xxxxxxxxxxxx>
• Re: [PATCH v5 06/12] can: m_can: Use u32 for putidx
  • From: Simon Horman <simon.horman@xxxxxxxxxxxx>
• Re: [PATCH v5 01/12] can: m_can: Write transmit header and data in one transaction
  • From: Simon Horman <simon.horman@xxxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Add myself as maintainer of the ems_pci.c driver
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] can: ems_pci: move ASIX AX99100 ids to pci_ids.h
  • From: Jiaqing Zhao <jiaqing.zhao@xxxxxxxxxxxxxxx>
• [PATCH] MAINTAINERS: Add myself as maintainer of the ems_pci.c driver
  • From: Gerhard Uttenthaler <uttenthaler@xxxxxxxxxxxxxxxx>
• Re: [PATCH net] can: raw: fix lockdep issue in raw_release()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net] can: raw: fix lockdep issue in raw_release()
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• Re: [PATCH v2 2/2] can: ems_pci: move ASIX AX99100 ids to pci_ids.h
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] can: ems_pci: move ASIX AX99100 ids to pci_ids.h
  • From: Jiaqing Zhao <jiaqing.zhao@xxxxxxxxxxxxxxx>
• [PATCH v2 1/2] can: ems_pci: remove PCI_SUBVENDOR_ID_ASIX definition
  • From: Jiaqing Zhao <jiaqing.zhao@xxxxxxxxxxxxxxx>
• [PATCH v2 0/2] can: ems_pci: refine PCI IDs for ASIX AX99100
  • From: Jiaqing Zhao <jiaqing.zhao@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 8/8] can: ems_pci: Add myself as module author
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4] add support for ASIX AX99100
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 0/2] can: gs_usb: fix time stamp counter initialization
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net-next 1/8] dt-bindings: net: can: Remove interrupt properties for MCAN
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH 0/2] can: gs_usb: fix time stamp counter initialization
  • From: john@xxxxxxxxxxxxxxxxxxxx
• Re: [PATCH net v3] can: raw: fix receiver memory leak
  • From: "Ziyang Xuan (William)" <william.xuanziyang@xxxxxxxxxx>
• Re: [PATCH net-next 7/8] can: kvaser_pciefd: Move hardware specific constants and functions into a driver_data struct
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net-next 7/8] can: kvaser_pciefd: Move hardware specific constants and functions into a driver_data struct
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 7/8] can: kvaser_pciefd: Add support for new Kvaser pciefd devices
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 5/8] can: Explicitly include correct DT includes
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 2/8] can: m_can: Add hrtimer to generate software interrupt
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 1/8] dt-bindings: net: can: Remove interrupt properties for MCAN
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 4/8] can: xilinx_can: Add support for controller reset
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 6/8] can: kvaser_pciefd: Move hardware specific constants and functions into a driver_data struct
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 3/8] dt-bindings: can: xilinx_can: Add reset description
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 0/8] pull-request: can-next 2023-07-19
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 8/8] can: ucan: Remove repeated word
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4] Add support for Allwinner D1 CAN controllers
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH net v3] can: raw: fix receiver memory leak
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• Re: [PATCH net v3] can: raw: fix receiver memory leak
  • From: "Ziyang Xuan (William)" <william.xuanziyang@xxxxxxxxxx>
• Re: [PATCH net v3] can: raw: fix receiver memory leak
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• Re: [PATCH net-next 1/8] dt-bindings: net: can: Remove interrupt properties for MCAN
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH net-next v3 0/9] Remove unnecessary (void*) conversions
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH net 1/5] can: raw: fix receiver memory leak
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH net-next 7/8] can: kvaser_pciefd: Move hardware specific constants and functions into a driver_data struct
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH 0/4] Add support for Allwinner D1 CAN controllers
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 0/4] Add support for Allwinner D1 CAN controllers
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/4] serial: 8250_pci: add support for ASIX AX99100
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 2/4] can: ems_pci: move ASIX AX99100 ids to pci_ids.h
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [PATCH 3/4] serial: 8250_pci: add support for ASIX AX99100
  • From: Jiaqing Zhao <jiaqing.zhao@xxxxxxxxxxxxxxx>
• [PATCH 4/4] parport_pc: add support for ASIX AX99100
  • From: Jiaqing Zhao <jiaqing.zhao@xxxxxxxxxxxxxxx>
• [PATCH 1/4] can: ems_pci: remove PCI_SUBVENDOR_ID_ASIX definition
  • From: Jiaqing Zhao <jiaqing.zhao@xxxxxxxxxxxxxxx>
• [PATCH 2/4] can: ems_pci: move ASIX AX99100 ids to pci_ids.h
  • From: Jiaqing Zhao <jiaqing.zhao@xxxxxxxxxxxxxxx>
• [PATCH 0/4] add support for ASIX AX99100
  • From: Jiaqing Zhao <jiaqing.zhao@xxxxxxxxxxxxxxx>
• [PATCH v2] can: ucan: Remove repeated word
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] can: gs_usb: convert to NAPI/rx-offload to avoid OoO reception
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] can: rx-offload: rename rx_offload_get_echo_skb() -> can_rx_offload_get_echo_skb_queue_timestamp()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>