From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
The CAN controller on PolarFire SoC has an AHB peripheral clock _and_ a
CAN bus clock. The bus clock was omitted when the binding was written,
but is required for operation. Make up for lost time and add to the DT.
Fixes: 38a71fc04895 ("riscv: dts: microchip: add mpfs's CAN controllers")
Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
---
arch/riscv/boot/dts/microchip/mpfs.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi
index 266489d43912..4d70df0f908c 100644
--- a/arch/riscv/boot/dts/microchip/mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi
@@ -416,7 +416,7 @@ i2c1: i2c@2010b000 {
can0: can@2010c000 {
compatible = "microchip,mpfs-can";
reg = <0x0 0x2010c000 0x0 0x1000>;
- clocks = <&clkcfg CLK_CAN0>;
+ clocks = <&clkcfg CLK_CAN0>, <&clkcfg CLK_MSSPLL3>;
interrupt-parent = <&plic>;
interrupts = <56>;
status = "disabled";
@@ -425,7 +425,7 @@ can0: can@2010c000 {
can1: can@2010d000 {
compatible = "microchip,mpfs-can";
reg = <0x0 0x2010d000 0x0 0x1000>;
- clocks = <&clkcfg CLK_CAN1>;
+ clocks = <&clkcfg CLK_CAN1>, <&clkcfg CLK_MSSPLL3>;
interrupt-parent = <&plic>;
interrupts = <57>;
status = "disabled";
--
2.39.2
