Linux CAN Development - Date Index

• Thread Index

• [PATCH v3 09/11] can: lin: Handle rx offload config frames
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH v3 08/11] can: bcm: Add LIN answer offloading for responder mode
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH v3 06/11] dt-bindings: net/can: Add serial (serdev) LIN adapter
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH v3 05/11] dt-bindings: vendor-prefixes: Add hexDEV
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH v3 02/11] HID: hexLIN: Add support for USB LIN bus adapter
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH v3 04/11] tty: serdev: Add method to enable break flags
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH v3 03/11] tty: serdev: Add flag buffer aware receive_buf_fp()
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH v3 01/11] can: Add LIN bus as CAN abstraction
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH v3 00/11] LIN Bus support for Linux
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• Re: [PATCH v2 07/12] can: Add support for serdev LIN adapters
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• Re: [PATCH v2 08/12] can: lin: Add special frame id for rx offload config
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• Re: [PATCH v2 06/12] dt-bindings: net/can: Add serial (serdev) LIN adapter
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH net-next v1 1/1] can: sja1000: plx_pci: Reuse predefined CTI subvendor ID
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 06/12] dt-bindings: net/can: Add serial (serdev) LIN adapter
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• Re: [PATCH v2 02/12] HID: hexLIN: Add support for USB LIN bus adapter
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• Re: [PATCH v2 08/12] can: lin: Add special frame id for rx offload config
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 06/12] dt-bindings: net/can: Add serial (serdev) LIN adapter
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v2 06/12] dt-bindings: net/can: Add serial (serdev) LIN adapter
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 05/12] dt-bindings: vendor-prefixes: Add hexDEV
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 07/12] can: Add support for serdev LIN adapters
  • From: Jiri Slaby <jirislaby@xxxxxxxxxx>
• Re: [PATCH v2 02/12] HID: hexLIN: Add support for USB LIN bus adapter
  • From: Jiri Slaby <jirislaby@xxxxxxxxxx>
• [PATCH v2 12/12] HID: hexLIN: Implement ability to update lin mode
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH v2 11/12] can: lin: Support setting LIN mode
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH v2 10/12] can: lin: Handle rx offload config frames
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH v2 09/12] can: bcm: Add LIN answer offloading for responder mode
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH v2 08/12] can: lin: Add special frame id for rx offload config
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH v2 07/12] can: Add support for serdev LIN adapters
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH v2 01/12] can: Add LIN bus as CAN abstraction
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH v2 02/12] HID: hexLIN: Add support for USB LIN bus adapter
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH v2 06/12] dt-bindings: net/can: Add serial (serdev) LIN adapter
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH v2 05/12] dt-bindings: vendor-prefixes: Add hexDEV
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH v2 04/12] tty: serdev: Add method to enable break flags
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH v2 00/12] LIN Bus support for Linux
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH v2 03/12] tty: serdev: Add flag buffer aware receive_buf_fp()
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• Re: [PATCH 05/11] dt-bindings: net: can: Add serdev LIN bus dt bindings
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH v2] can: m_can: don't enable transceiver when probing
  • From: Martin Hundebøll <martin@xxxxxxxxxx>
• [PATCH] Documentation: networking: document ISO 15765-2
  • From: Francesco Valla <valla.francesco@xxxxxxxxx>
• [PATCH v4 0/1] Documentation: networking: document ISO 15765-2
  • From: Francesco Valla <valla.francesco@xxxxxxxxx>
• Re: [PATCH v3] can: mcp251xfd: fix infinite loop when xmit fails
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/1] Documentation: networking: document ISO 15765-2
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] Documentation: networking: document ISO 15765-2
  • From: Francesco Valla <valla.francesco@xxxxxxxxx>
• Re: [PATCH v3 0/1] Documentation: networking: document ISO 15765-2
  • From: Francesco Valla <valla.francesco@xxxxxxxxx>
• Re: [PATCH v3 0/1] Documentation: networking: document ISO 15765-2
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: isotp: remove ISO 15675-2 specification version where possible
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: Kconfig: remove obsolete help text for slcan
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 0/3] can: mcp251xfd: move device init into runtime_pm
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 2/3] can: mcp251xfd: move mcp251xfd_timestamp_start()/stop() into mcp251xfd_chip_start/stop()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 1/3] can: mcp251xfd: properly indent labels
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 3/3] can: mcp251xfd: move chip sleep mode into runtime pm
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC PATCH] can: gw: fix RCU/BH usage in cgw_create_job()
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] can: Kconfig: remove obsolete help text for slcan
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• [PATCH] can: Kconfig: remove obsolete help text for slcan
  • From: Mans Rullgard <mans@xxxxxxxxx>
• Re: [PATCH] Documentation: networking: document ISO 15765-2
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• [PATCH] Documentation: networking: document ISO 15765-2
  • From: Francesco Valla <valla.francesco@xxxxxxxxx>
• [PATCH v3 0/1] Documentation: networking: document ISO 15765-2
  • From: Francesco Valla <valla.francesco@xxxxxxxxx>
• Re: [PATCH] can: isotp: remove ISO 15675-2 specification version where possible
  • From: Francesco Valla <valla.francesco@xxxxxxxxx>
• [syzbot] [can?] KMSAN: kernel-infoleak in raw_recvmsg
  • From: syzbot <syzbot+5681e40d297b30f5b513@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 02/11] HID: hexLIN: Add support for USB LIN bus adapter
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• Re: [PATCH v3] can: mcp251xfd: fix infinite loop when xmit fails
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• Re: Re: [PATCH 1/4] can: mcp251xfd: stop timestamp before sending chip to sleep
  • From: Gregor Herburger <gregor.herburger@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] can: mcp251xfd: stop timestamp before sending chip to sleep
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: Re: [PATCH 2/4] can: mcp251xfd: mcp251xfd_regmap_crc_write(): workaround for errata 5
  • From: Gregor Herburger <gregor.herburger@xxxxxxxxxxxxxxx>
• Re: Re: [PATCH 1/4] can: mcp251xfd: stop timestamp before sending chip to sleep
  • From: Gregor Herburger <gregor.herburger@xxxxxxxxxxxxxxx>
• Re: Re: [PATCH 1/4] can: mcp251xfd: stop timestamp before sending chip to sleep
  • From: Gregor Herburger <gregor.herburger@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] can: mcp251xfd: add gpio functionality
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] can: mcp251xfd: stop timestamp before sending chip to sleep
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] can: mcp251xfd: mcp251xfd_regmap_crc_write(): workaround for errata 5
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] can: mcp251xfd: mcp251xfd_regmap_crc_write(): workaround for errata 5
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH 3/4] can: mcp251xfd: add gpio functionality
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] can: mcp251xfd: add gpio functionality
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] can: mcp251xfd: add gpio functionality
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] can: mcp251xfd: stop timestamp before sending chip to sleep
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] can: mcp251xfd: add gpio functionality
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 01/11] can: Add LIN bus as CAN abstraction
  • From: Jiri Slaby <jirislaby@xxxxxxxxxx>
• Re: [PATCH 2/4] can: mcp251xfd: mcp251xfd_regmap_crc_write(): workaround for errata 5
  • From: Simon Horman <horms@xxxxxxxxxx>
• Re: [PATCH 01/11] can: Add LIN bus as CAN abstraction
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• Re: [PATCH 05/11] dt-bindings: net: can: Add serdev LIN bus dt bindings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] can: isotp: remove ISO 15675-2 specification version where possible
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [PATCH] can: isotp: remove ISO 15675-2 specification version where possible
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH 05/11] dt-bindings: net: can: Add serdev LIN bus dt bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 02/11] HID: hexLIN: Add support for USB LIN bus adapter
  • From: Benjamin Tissoires <bentiss@xxxxxxxxxx>
• Re: [PATCH 01/11] can: Add LIN bus as CAN abstraction
  • From: Jiri Slaby <jirislaby@xxxxxxxxxx>
• Re: [PATCH 05/11] dt-bindings: net: can: Add serdev LIN bus dt bindings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 06/11] can: Add support for serdev LIN adapters
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH 01/11] can: Add LIN bus as CAN abstraction
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH 04/11] tty: serdev: Add method to enable break flags
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH 03/11] tty: serdev: Add flag buffer aware receive_buf_fp()
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH 11/11] HID: hexLIN: Implement ability to update lin mode
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH 09/11] can: lin: Handle rx offload config frames
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH 07/11] can: lin: Add special frame id for rx offload config
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH 05/11] dt-bindings: net: can: Add serdev LIN bus dt bindings
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH 00/11] LIN Bus support for Linux
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH 10/11] can: lin: Support setting LIN mode
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH 02/11] HID: hexLIN: Add support for USB LIN bus adapter
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• [PATCH 08/11] can: bcm: Add LIN answer offloading for responder mode
  • From: Christoph Fritz <christoph.fritz@xxxxxxxxx>
• Re: [PATCH] can: isotp: remove ISO 15675-2 specification version where possible
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [PATCH v2 1/1] Documentation: networking: document ISO 15765-2:2016
  • From: Francesco Valla <valla.francesco@xxxxxxxxx>
• Re: [PATCH v2 1/1] Documentation: networking: document ISO 15765-2:2016
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH] can: isotp: remove ISO 15675-2 specification version where possible
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH 4/4] dt-binding: can: mcp251xfd: add gpio-controller property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/1] Documentation: networking: document ISO 15765-2:2016
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [PATCH v2 1/1] Documentation: networking: document ISO 15765-2:2016
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [PATCH 4/4] dt-binding: can: mcp251xfd: add gpio-controller property
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 4/4] dt-binding: can: mcp251xfd: add gpio-controller property
  • From: Gregor Herburger <gregor.herburger@xxxxxxxxxxxxxxx>
• [PATCH 3/4] can: mcp251xfd: add gpio functionality
  • From: Gregor Herburger <gregor.herburger@xxxxxxxxxxxxxxx>
• [PATCH 2/4] can: mcp251xfd: mcp251xfd_regmap_crc_write(): workaround for errata 5
  • From: Gregor Herburger <gregor.herburger@xxxxxxxxxxxxxxx>
• [PATCH 1/4] can: mcp251xfd: stop timestamp before sending chip to sleep
  • From: Gregor Herburger <gregor.herburger@xxxxxxxxxxxxxxx>
• [PATCH 0/4] can: mcp251xfd: add gpio functionality
  • From: Gregor Herburger <gregor.herburger@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] Documentation: networking: document ISO 15765-2:2016
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v2 1/1] Documentation: networking: document ISO 15765-2:2016
  • From: Francesco Valla <valla.francesco@xxxxxxxxx>
• Re: [PATCH v2 1/1] Documentation: networking: document ISO 15765-2:2016
  • From: Francesco Valla <valla.francesco@xxxxxxxxx>
• Re: [PATCH v2 1/1] Documentation: networking: document ISO 15765-2:2016
  • From: Francesco Valla <valla.francesco@xxxxxxxxx>
• Re: [PATCH v2 1/1] Documentation: networking: document ISO 15765-2:2016
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [PATCH v2 1/1] Documentation: networking: document ISO 15765-2:2016
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• Re: [PATCH v2 1/1] Documentation: networking: document ISO 15765-2:2016
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [syzbot] [can?] KASAN: slab-use-after-free Read in j1939_xtp_rx_dat_one
  • From: syzbot <syzbot+75ec36af46e2098f253c@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] Documentation: networking: document ISO 15765-2:2016
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [PATCH v2 1/1] Documentation: networking: document ISO 15765-2:2016
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v2 1/1] Documentation: networking: document ISO 15765-2:2016
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [PATCH net-next v1 1/1] can: mcp251x: Fix up includes
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• [PATCH net-next v1 1/1] can: mcp251x: Fix up includes
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH net-next 0/1] XYZ: Handle HAS_IOPORT dependencies
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Embedded World 2024
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: m_can: don't enable transceiver when probing
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• Re: [PATCH net-next 0/1] XYZ: Handle HAS_IOPORT dependencies
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH net-next 0/1] XYZ: Handle HAS_IOPORT dependencies
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH net-next 1/1] net: handle HAS_IOPORT dependencies
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Rare mcp251xfd crash after CRC read error, in timestamp read routine
  • From: Torin Cooper-Bennun <tcbennun@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/1] Documentation: networking: document ISO 15765-2:2016
  • From: Francesco Valla <valla.francesco@xxxxxxxxx>
• [PATCH v2 0/1] Documentation: networking: document ISO 15765-2:2016
  • From: Francesco Valla <valla.francesco@xxxxxxxxx>
• [PATCH] can: m_can: don't enable transceiver when probing
  • From: Martin Hundebøll <martin@xxxxxxxxxx>
• Re: [PATCH 1/1] Documentation: networking: document CAN ISO-TP
  • From: Simon Horman <horms@xxxxxxxxxx>
• Re: [PATCH net] can: kvaser_pciefd: Add additional Xilinx interrupts
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH 1/1] Documentation: networking: document CAN ISO-TP
  • From: Francesco Valla <valla.francesco@xxxxxxxxx>
• [PATCH net] can: kvaser_pciefd: Add additional Xilinx interrupts
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 0/1] pull-request: can 2024-03-20
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net-next v1 1/1] can: mcp251x: Fix up includes
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH net-next v1 1/1] can: mcp251x: Fix up includes
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH net-next v1 1/1] can: mcp251x: Fix up includes
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 1/1] Documentation: networking: document CAN ISO-TP
  • From: Simon Horman <horms@xxxxxxxxxx>
• Re: [PATCH net-next v1 1/1] can: mcp251x: Fix up includes
  • From: Jiri Pirko <jiri@xxxxxxxxxxx>
• [PATCH net-next v1 1/1] can: mcp251x: Fix up includes
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [Wireshark-dev] [PATCH 0/4] Wireshark SocketCAN updates
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [Wireshark-dev] [PATCH 0/4] Wireshark SocketCAN updates
  • From: Gerald Combs <gerald@xxxxxxxxxxxxx>
• [PATCH 2/4] socketcan: display CANFD_FDF and CANXL_XLF flag content
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH 0/4] Wireshark SocketCAN updates
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH] socketcan: make CAN CC/FD/XL frame handling less invasive
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH 1/4] socketcan: simplify CAN packet type detection
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH 4/4] socketcan: update CAN CiA 611-1 definitions
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH 3/4] socketcan: display len8dlc content for Classical CAN
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [syzbot] [can?] [bpf?] KMSAN: uninit-value in bpf_prog_run_generic_xdp
  • From: syzbot <syzbot+0e6ddb1ef80986bdfe64@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] Documentation: networking: document CAN ISO-TP
  • From: Francesco Valla <valla.francesco@xxxxxxxxx>
• Re: [syzbot] [can?] possible deadlock in j1939_session_activate
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [syzbot] [can?] possible deadlock in j1939_session_activate
  • From: syzbot <syzbot+f32cbede7fd867ce0d56@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] Documentation: networking: document CAN ISO-TP
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• Re: [PATCH 1/1] Documentation: networking: document CAN ISO-TP
  • From: Francesco Valla <valla.francesco@xxxxxxxxx>
• Re: [PATCH 1/1] Documentation: networking: document CAN ISO-TP
  • From: Francesco Valla <valla.francesco@xxxxxxxxx>
• Re: [PATCH 1/1] Documentation: networking: document CAN ISO-TP
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH 1/1] Documentation: networking: document CAN ISO-TP
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: kvaser_pciefd: Add additional Xilinx interrupts
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] can: kvaser_pciefd: Add additional Xilinx interrupts
  • From: Martin Jocić <martin.jocic@xxxxxxxxxx>
• [PATCH 1/1] Documentation: networking: document CAN ISO-TP
  • From: Francesco Valla <valla.francesco@xxxxxxxxx>
• [RFC PATCH 0/1] Documentation: networking: document CAN ISO-TP
  • From: Francesco Valla <valla.francesco@xxxxxxxxx>
• Re: [PATCH] can: gw: prefer kfree_rcu() over call_rcu() with cgw_job_free_rcu()
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• Re: [PATCH] can: gw: prefer kfree_rcu() over call_rcu() with cgw_job_free_rcu()
  • From: Dmitry Antipov <dmantipov@xxxxxxxxx>
• Re: [syzbot] [can?] possible deadlock in j1939_sk_queue_drop_all
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [syzbot] [can?] possible deadlock in j1939_sk_queue_drop_all
  • From: syzbot <syzbot+3bd970a1887812621b4c@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Regressions can bus with MCP2515 on sama5d3 connected over SPI stop working on kernel > 5.4.271
  • From: Daniel Smolik <smolik@xxxxxxxxxx>
• Re: Regressions can bus with MCP2515 on sama5d3 connected over SPI stop working on kernel > 5.4.271
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: Regressions can bus with MCP2515 on sama5d3 connected over SPI stop working on kernel > 5.4.271
  • From: Daniel Smolik <smolik@xxxxxxxxxx>
• Re: Regressions can bus with MCP2515 on sama5d3 connected over SPI stop working on kernel > 5.4.271
  • From: "Linux regression tracking (Thorsten Leemhuis)" <regressions@xxxxxxxxxxxxx>
• Re: Regressions can bus with MCP2515 on sama5d3 connected over SPI stop working on kernel > 5.4.271
  • From: Daniel Smolik <smolik@xxxxxxxxxx>
• Re: [PATCH] can: gw: prefer kfree_rcu() over call_rcu() with cgw_job_free_rcu()
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• Re: Regressions can bus with MCP2515 on sama5d3 connected over SPI stop working on kernel > 5.4.271
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: gw: prefer kfree_rcu() over call_rcu() with cgw_job_free_rcu()
  • From: Dmitry Antipov <dmantipov@xxxxxxxxx>
• Re: [PATCH] can: gw: prefer kfree_rcu() over call_rcu() with cgw_job_free_rcu()
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• [PATCH] can: gw: prefer kfree_rcu() over call_rcu() with cgw_job_free_rcu()
  • From: Dmitry Antipov <dmantipov@xxxxxxxxx>
• Re: Regressions can bus with MCP2515 on sama5d3 connected over SPI stop working on kernel > 5.4.271
  • From: "Linux regression tracking (Thorsten Leemhuis)" <regressions@xxxxxxxxxxxxx>
• Re: [PATCH v3] can: mcp251xfd: fix infinite loop when xmit fails
  • From: vitor <ivitro@xxxxxxxxx>
• [PATCH v3] can: mcp251xfd: fix infinite loop when xmit fails
  • From: Vitor Soares <ivitro@xxxxxxxxx>
• [PATCH] can: mcp251xfd: fix infinite loop when xmit fails
  • From: Vitor Soares <ivitro@xxxxxxxxx>
• Re: [PATCH v2] can: mcp251xfd: fix infinite loop when xmit fails
  • From: vitor <ivitro@xxxxxxxxx>
• [PATCH v2] can: mcp251xfd: fix infinite loop when xmit fails
  • From: Vitor Soares <ivitro@xxxxxxxxx>
• Re: [PATCH] can: mcp251xfd: fix infinite loop when xmit fails
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: mcp251xfd: fix infinite loop when xmit fails
  • From: vitor <ivitro@xxxxxxxxx>
• Re: [PATCH] can: mcp251xfd: fix infinite loop when xmit fails
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [virtio-comment] [RFC PATCH v3] virtio-can: Device specification.
  • From: Matias Ezequiel Vara Larsen <mvaralar@xxxxxxxxxx>
• 판매 문의 2024
  • From: info@xxxxxxxxxxxxxxxxxxxxxx
• Re: [PATCH net-next 1/4] can: kvaser_usb: Add support for Leaf v3
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• [PATCH net-next 2/4] can: kvaser_pciefd: Add support for Kvaser PCIe 8xCAN
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 4/4] can: mcp251xfd: __mcp251xfd_get_berr_counter(): use CAN_BUS_OFF_THRESHOLD instead of open coding it
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 3/4] can: gs_usb: gs_cmd_reset(): use cpu_to_le32() to assign mode
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 1/4] can: kvaser_usb: Add support for Leaf v3
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 0/4] pull-request: can-next 2024-03-04
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: kvaser_usb: Add support for Leaf v3
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: kvaser_pciefd: Add support for Kvaser PCIe 8xCAN
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH can-next] can: gs_usb: gs_cmd_reset(): use cpu_to_le32() to assign mode
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH can-next] can: mcp251xfd: __mcp251xfd_get_berr_counter(): use CAN_BUS_OFF_THRESHOLD instead of open coding it
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] can: kvaser_pciefd: Add support for Kvaser PCIe 8xCAN
  • From: Martin Jocić <martin.jocic@xxxxxxxxxx>
• Re: [virtio-dev] Re: [virtio-comment] [RFC PATCH v3] virtio-can: Device specification.
  • From: Matias Ezequiel Vara Larsen <mvaralar@xxxxxxxxxx>
• Re: [virtio-dev] Re: [virtio-comment] [RFC PATCH v3] virtio-can: Device specification.
  • From: Cornelia Huck <cohuck@xxxxxxxxxx>
• [PATCH] can: kvaser_usb: Add support for Leaf v3
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• Re: [virtio-comment] [RFC PATCH v3] virtio-can: Device specification.
  • From: Matias Ezequiel Vara Larsen <mvaralar@xxxxxxxxxx>
• RE: [PATCH] can: raw: raw_getsockopt(): reduce scope of err
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: [virtio-comment] [RFC PATCH v3] virtio-can: Device specification.
  • From: Mikhail Golubev-Ciuchea <mikhail.golubev-ciuchea@xxxxxxxxxxxxxxx>
• Re: [PATCH] can: netlink: Fix TDCO calculation using the old data bittiming
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH] can: netlink: Fix TDCO calculation using the old data bittiming
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: netlink: Fix TDCO calculation using the old data bittiming
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [virtio-dev] Re: [virtio-comment] [RFC PATCH v3] virtio-can: Device specification.
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [virtio-dev] Re: [virtio-comment] [RFC PATCH v3] virtio-can: Device specification.
  • From: Matias Ezequiel Vara Larsen <mvaralar@xxxxxxxxxx>
• Re: [virtio-comment] [RFC PATCH v3] virtio-can: Device specification.
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [virtio-comment] [RFC PATCH v3] virtio-can: Device specification.
  • From: Matias Ezequiel Vara Larsen <mvaralar@xxxxxxxxxx>
• Re: [PATCH net-next 1/9] can: m_can: remove redundant check for pm_clock_support
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH] can: softing: remove redundant NULL check
  • From: Simon Horman <horms@xxxxxxxxxx>
• Re: [virtio-comment] [RFC PATCH v3] virtio-can: Device specification.
  • From: Matias Ezequiel Vara Larsen <mvaralar@xxxxxxxxxx>
• Re: Protocol recommendation for CAN(FD)-USB adapter
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: Protocol recommendation for CAN(FD)-USB adapter
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH] can: raw: raw_getsockopt(): reduce scope of err
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 6/9] can: xilinx_can: Add ECC support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 8/9] can: raw: fix getsockopt() for new CAN_RAW_XL_VCID_OPTS
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 4/9] can: tcan4x5x: support resuming from rx interrupt signal
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 9/9] can: raw: raw_getsockopt(): reduce scope of err
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 7/9] can: xilinx_can: Add ethtool stats interface for ECC errors
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 5/9] dt-bindings: can: xilinx_can: Add 'xlnx,has-ecc' optional property
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 2/9] dt-bindings: can: tcan4x5x: Document the wakeup-source flag
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 0/9] pull-request: can-next 2024-02-20
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 3/9] can: m_can: allow keeping the transceiver running in suspend
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 1/9] can: m_can: remove redundant check for pm_clock_support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: raw: raw_getsockopt(): reduce scope of err
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net-next] can: raw: raw_getsockopt(): reduce scope of err
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: raw: raw_getsockopt(): reduce scope of err
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: Protocol recommendation for CAN(FD)-USB adapter
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [PATCH] can: raw: raw_getsockopt(): reduce scope of err
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [PATCH] can: raw: raw_getsockopt(): reduce scope of err
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• [PATCH] can: raw: raw_getsockopt(): reduce scope of err
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: Protocol recommendation for CAN(FD)-USB adapter
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: Protocol recommendation for CAN(FD)-USB adapter
  • From: "Dr. Michael 'Mickey' Lauer" <mickey@xxxxxxxxxx>
• Re: [PATCH net-next 22/23] can: canxl: add virtual CAN network identifier support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: raw: fix getsockopt() for new CAN_RAW_XL_VCID_OPTS
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: softing: remove redundant NULL check
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH] can: raw: fix getsockopt() for new CAN_RAW_XL_VCID_OPTS
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH net-next 22/23] can: canxl: add virtual CAN network identifier support
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH] can: raw: fix getsockopt() for new CAN_RAW_XL_VCID_OPTS
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH] can: softing: remove redundant NULL check
  • From: Simon Horman <horms@xxxxxxxxxx>
• Re: Protocol recommendation for CAN(FD)-USB adapter
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2] can: peak_usb: fix potential kernel log flooding
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net-next 22/23] can: canxl: add virtual CAN network identifier support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net-next 22/23] can: canxl: add virtual CAN network identifier support
  • From: Simon Horman <horms@xxxxxxxxxx>
• Re: Protocol recommendation for CAN(FD)-USB adapter
  • From: "Dr. Michael Lauer" <mickey@xxxxxxxxxx>
• Re: [PATCH v2] can: peak_usb: fix potential kernel log flooding
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH] can: softing: remove redundant NULL check
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH] can: softing: remove redundant NULL check
  • From: Simon Horman <horms@xxxxxxxxxx>
• AW: [PATCH 1/3] can: peak_usb: fix potential "UBSAN: shitf-out-of-bounds" issue
  • From: Sven Schuchmann <schuchmann@xxxxxxxxxxxxxxxxx>
• [PATCH v2] can: peak_usb: fix potential kernel log flooding
  • From: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
• Re: Protocol recommendation for CAN(FD)-USB adapter
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] can: peak_usb: fix potential "UBSAN: shitf-out-of-bounds" issue
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] can: peak_usb: fix potential kernel log flooding
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] can: peak_usb: fix potential "UBSAN: shitf-out-of-bounds" issue
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: RE: [PATCH v8 0/3] Add ECC feature support to Tx and Rx FIFOs for Xilinx CAN Controller.
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [virtio-dev] [RFC PATCH v3] virtio-can: Device specification.
  • From: Cornelia Huck <cohuck@xxxxxxxxxx>
• RE: [PATCH 3/3] can: peak_usb: fix potential kernel log flooding
  • From: Stéphane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
• Re: [PATCH] can: m_can: remove redundant check for pm_clock_support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: m_can: remove redundant check for pm_clock_support
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• Re: [PATCH 3/3] can: peak_usb: fix potential kernel log flooding
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• [PATCH 1/3] can: peak_usb: fix potential "UBSAN: shitf-out-of-bounds" issue
  • From: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
• [PATCH 2/3] can: peak_usb: increase rx buffer size used for USB bulk transfer
  • From: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
• [PATCH 3/3] can: peak_usb: fix potential kernel log flooding
  • From: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
• RE: [PATCH v8 0/3] Add ECC feature support to Tx and Rx FIFOs for Xilinx CAN Controller.
  • From: "Goud, Srinivas" <srinivas.goud@xxxxxxx>
• Re: [Wireshark-dev] SocketCAN Support is broken in latest Wireshark-v4.3.0rc0-1430-g600de02805d0
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH net 1/3] can: j1939: prevent deadlock by changing j1939_socks_lock to rwlock
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH net 1/3] can: j1939: prevent deadlock by changing j1939_socks_lock to rwlock
  • From: Paolo Abeni <pabeni@xxxxxxxxxx>
• [PATCH net 2/3] can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER)
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 3/3] can: netlink: Fix TDCO calculation using the old data bittiming
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 1/3] can: j1939: prevent deadlock by changing j1939_socks_lock to rwlock
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 0/3] pull-request: can 2024-02-14
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [Wireshark-dev] SocketCAN Support is broken in latest Wireshark-v4.3.0rc0-1430-g600de02805d0
  • From: Guy Harris <gharris@xxxxxxxxx>
• Re: [Wireshark-dev] SocketCAN Support is broken in latest Wireshark-v4.3.0rc0-1430-g600de02805d0
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [Wireshark-dev] SocketCAN Support is broken in latest Wireshark-v4.3.0rc0-1430-g600de02805d0
  • From: Guy Harris <gharris@xxxxxxxxx>
• Re: [PATCH net-next 01/23] can: bcm: add recvmsg flags for own, local and remote traffic
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH net-next 17/23] can: m_can: Implement BQL
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• Re: [virtio-dev] [RFC PATCH v3] virtio-can: Device specification.
  • From: Cornelia Huck <cohuck@xxxxxxxxxx>
• Re: [PATCH net-next 17/23] can: m_can: Implement BQL
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 17/23] can: m_can: Implement BQL
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 20/23] can: kvaser_pciefd: Add support for Kvaser M.2 PCIe 4xCAN
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 18/23] can: m_can: Implement transmit submission coalescing
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 22/23] can: canxl: add virtual CAN network identifier support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 15/23] can: m_can: Introduce a tx_fifo_in_flight counter
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 19/23] can: change can network drivers maintainer
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 16/23] can: m_can: Use tx_fifo_in_flight for netif_queue control
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 21/23] can: softing: remove redundant NULL check
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 23/23] MAINTAINERS: can: xilinx_can: remove Naga Sureshkumar Relli
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 09/23] can: m_can: Implement transmit coalescing
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 14/23] can: m_can: Use the workqueue as queue
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 13/23] can: m_can: Cache tx putidx
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 11/23] can: m_can: Add tx coalescing ethtool support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 10/23] can: m_can: Add rx coalescing ethtool support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 12/23] can: m_can: Use u32 for putidx
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 08/23] can: m_can: Implement receive coalescing
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 07/23] can: m_can: Write transmit header and data in one transaction
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 05/23] can: m_can: Start/Cancel polling timer together with interrupts
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 06/23] can: m_can: Move hrtimer init to m_can_class_register
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 04/23] can: esd: add support for esd GmbH PCIe/402 CAN interface family
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 01/23] can: bcm: add recvmsg flags for own, local and remote traffic
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 03/23] MAINTAINERS: add Stefan Mätje as maintainer for the esd electronics GmbH PCIe/402 CAN drivers
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 02/23] can: isotp: support dynamic flow control parameters
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 0/23] pull-request: can-next 2024-02-13
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH RESEND v7 0/3] can: xilinx_can: Add ECC feature support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] MAINTAINERS: can: xilinx_can: remove Naga Sureshkumar Relli
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v8 2/3] can: xilinx_can: Add ECC support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v8 1/3] dt-bindings: can: xilinx_can: Add 'xlnx,has-ecc' optional property
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v8 0/3] Add ECC feature support to Tx and Rx FIFOs for Xilinx CAN Controller.
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v8 3/3] can: xilinx_can: Add ethtool stats interface for ECC errors
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH RESEND v7 0/3] can: xilinx_can: Add ECC feature support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH rework v1] canxl: add virtual CAN network identifier support
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [Wireshark-dev] SocketCAN Support is broken in latest Wireshark-v4.3.0rc0-1430-g600de02805d0
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH rework v2] canxl: add virtual CAN network identifier support
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH rework v1] canxl: add virtual CAN network identifier support
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH rework v1] canxl: add virtual CAN network identifier support
  • From: Guy Harris <gharris@xxxxxxxxx>
• Re: [PATCH rework v1] canxl: add virtual CAN network identifier support
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH rework v1] canxl: add virtual CAN network identifier support
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH rework v1] canxl: add virtual CAN network identifier support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH rework v1] canxl: add virtual CAN network identifier support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH rework v1] canxl: add virtual CAN network identifier support
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH rework v1] canxl: add virtual CAN network identifier support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH rework v1] canxl: add virtual CAN network identifier support
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: can: fsl,flexcan: add i.MX95 compatible string
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] can: softing: remove redundant NULL check
  • From: Daniil Dulov <d.dulov@xxxxxxxxxx>
• Re: Protocol recommendation for CAN(FD)-USB adapter
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Protocol recommendation for CAN(FD)-USB adapter
  • From: "Dr. Michael 'Mickey' Lauer" <mickey@xxxxxxxxxx>
• Re: [PATCH] can: kvaser_pciefd: Add support for Kvaser M.2 PCIe 4xCAN
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• Re: [PATCH 00/14] can: m_can: Optimizations for m_can/tcan part 2
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH 14/14] can: m_can: Implement transmit submission coalescing
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH 13/14] can: m_can: Implement BQL
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH 12/14] can: m_can: Use tx_fifo_in_flight for netif_queue control
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH 10/14] can: m_can: Use the workqueue as queue
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH 11/14] can: m_can: Introduce a tx_fifo_in_flight counter
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH 09/14] can: m_can: Cache tx putidx
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH 08/14] can: m_can: Use u32 for putidx
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH 07/14] can: m_can: Add tx coalescing ethtool support
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH 06/14] can: m_can: Add rx coalescing ethtool support
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH 05/14] can: m_can: Implement transmit coalescing
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH 04/14] can: m_can: Implement receive coalescing
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH 03/14] can: m_can: Write transmit header and data in one transaction
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH 02/14] can: m_can: Move hrtimer init to m_can_class_register
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH 01/14] can: m_can: Start/Cancel polling timer together with interrupts
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH 00/14] can: m_can: Optimizations for m_can/tcan part 2
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• Re: (subset) [PATCH v2 0/7] MPFS clock fixes required for correct CAN clock modeling
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 2/7] dt-bindings: can: mpfs: add missing required clock
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH 0/1] can network drivers maintainer
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH 1/1] can: change can network drivers maintainer
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• Re: [virtio-comment] [RFC PATCH v3] virtio-can: Device specification.
  • From: Cornelia Huck <cohuck@xxxxxxxxxx>
• Re: [PATCH v5] can: virtio: Initial virtio CAN driver.
  • From: Harald Mommer <harald.mommer@xxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: can: fsl,flexcan: add i.MX95 compatible string
  • From: Conor Dooley <conor@xxxxxxxxxx>
• RE: [PATCH] dt-bindings: can: fsl,flexcan: add i.MX95 compatible string
  • From: Peng Fan <peng.fan@xxxxxxx>
• Re: [PATCH] dt-bindings: can: fsl,flexcan: add i.MX95 compatible string
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 3/4] can: cast: add driver for CAST CAN controller
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 2/4] dt-bindings: can: Add bindings for CAST CAN Controller
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v1 1/4] dt-bindings: vendor-prefixes: Add cast vendor prefix
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/7] dt-bindings: can: mpfs: add missing required clock
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/7] dt-bindings: can: mpfs: add missing required clock
  • From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
• RE: [PATCH v1 2/4] dt-bindings: can: Add bindings for CAST CAN Controller
  • From: William Qiu <william.qiu@xxxxxxxxxxxxxxxx>
• RE: RE: [PATCH v1 0/4] CAST Controller Area Network driver support
  • From: William Qiu <william.qiu@xxxxxxxxxxxxxxxx>
• Re: [PATCH v1 3/4] can: cast: add driver for CAST CAN controller
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 3/4] can: cast: add driver for CAST CAN controller
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 2/4] dt-bindings: can: Add bindings for CAST CAN Controller
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v1 1/4] dt-bindings: vendor-prefixes: Add cast vendor prefix
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v11 0/2] can: esd: add support for esd GmbH PCIe/402 CAN interface
  • From: Stefan Mätje <Stefan.Maetje@xxxxxx>
• Re: RE: [PATCH v1 0/4] CAST Controller Area Network driver support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: can-next patches summary
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• RE: [PATCH v1 3/4] can: cast: add driver for CAST CAN controller
  • From: William Qiu <william.qiu@xxxxxxxxxxxxxxxx>
• Re: [PATCH v1 3/4] can: cast: add driver for CAST CAN controller
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• RE: [PATCH v1 0/4] CAST Controller Area Network driver support
  • From: William Qiu <william.qiu@xxxxxxxxxxxxxxxx>
• Re: [PATCH v1 0/4] CAST Controller Area Network driver support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: SLCAN and systemd
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v1 0/4] CAST Controller Area Network driver support
  • From: William Qiu <william.qiu@xxxxxxxxxxxxxxxx>
• [PATCH v1 1/4] dt-bindings: vendor-prefixes: Add cast vendor prefix
  • From: William Qiu <william.qiu@xxxxxxxxxxxxxxxx>
• [PATCH v1 2/4] dt-bindings: can: Add bindings for CAST CAN Controller
  • From: William Qiu <william.qiu@xxxxxxxxxxxxxxxx>
• [PATCH v1 4/4] riscv: dts: starfive: jh7110: Add CAN node
  • From: William Qiu <william.qiu@xxxxxxxxxxxxxxxx>
• [PATCH v1 3/4] can: cast: add driver for CAST CAN controller
  • From: William Qiu <william.qiu@xxxxxxxxxxxxxxxx>
• can-next patches summary
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v4] canxl: add virtual CAN network identifier support
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v5] canxl: add virtual CAN network identifier support
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v4] canxl: add virtual CAN network identifier support
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH v3] can: bcm: add recvmsg flags for own, local and remote traffic
  • From: Nicolas Maier <nicolas.maier.dev@xxxxxxxxx>
• SLCAN and systemd
  • From: Uwe Bonnes <bon@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Candump timing issues
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Candump timing issues
  • From: "Dr. Michael 'Mickey' Lauer" <mickey@xxxxxxxxxx>
• Re: [PATCH v2 2/7] dt-bindings: can: mpfs: add missing required clock
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• RE: [PATCH] dt-bindings: can: fsl,flexcan: add i.MX95 compatible string
  • From: Peng Fan <peng.fan@xxxxxxx>
• Re: [PATCH] dt-bindings: can: fsl,flexcan: add i.MX95 compatible string
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH v2 2/7] dt-bindings: can: mpfs: add missing required clock
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 2/7] dt-bindings: can: mpfs: add missing required clock
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/7] dt-bindings: can: mpfs: add missing required clock
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 2/7] dt-bindings: can: mpfs: add missing required clock
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/7] dt-bindings: can: mpfs: add missing required clock
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 2/7] dt-bindings: can: mpfs: add missing required clock
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 7/7] riscv: dts: microchip: add missing CAN bus clocks
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v2 6/7] clk: microchip: mpfs: convert MSSPLL outputs to clk_divider
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v2 5/7] clk: microchip: mpfs: add missing MSSPLL outputs
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v2 4/7] clk: microchip: mpfs: setup for using other mss pll outputs
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v2 3/7] clk: microchip: mpfs: split MSSPLL in two
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v2 2/7] dt-bindings: can: mpfs: add missing required clock
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v2 1/7] dt-bindings: clock: mpfs: add more MSSPLL output definitions
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v2 0/7] MPFS clock fixes required for correct CAN clock modeling
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: can: fsl,flexcan: add i.MX95 compatible string
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC PATCH] can: gw: fix RCU/BH usage in cgw_create_job()
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: can: fsl,flexcan: add i.MX95 compatible string
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH] dt-bindings: can: fsl,flexcan: add i.MX95 compatible string
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• Re: [PATCH v3] canxl: add virtual CAN network identifier support
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [RFC PATCH] can: gw: fix RCU/BH usage in cgw_create_job()
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v2] can: bcm: add recvmsg flags for own, local and remote traffic
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v3] can: bcm: add recvmsg flags for own, local and remote traffic
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [syzbot] Monthly can report (Jan 2024)
  • From: syzbot <syzbot+list73e9230888c286ba3102@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [virtio-comment] [RFC PATCH v3] virtio-can: Device specification.
  • From: Cornelia Huck <cohuck@xxxxxxxxxx>
• Re: [PATCH] can: m_can: remove redundant check for pm_clock_support
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v2] can: bcm: add recvmsg flags for own, local and remote traffic
  • From: Nicolas Maier <nicolas.maier.dev@xxxxxxxxx>
• Re: [PATCH] can: bcm: add recvmsg flags for own, local and remote traffic
  • From: Nicolas Maier <nicolas.maier.dev@xxxxxxxxx>
• Re: [PATCH] net: can: Add support for aliases in CAN
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] net: can: Add support for aliases in CAN
  • From: "Kumar, Udit" <u-kumar1@xxxxxx>
• [ANNOUNCEMENT] Open ISOBUS File Server (FS) and Client Implementation
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH RESEND v7 3/3] can: xilinx_can: Add ethtool stats interface for ECC errors
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [PATCH RESEND v7 2/3] can: xilinx_can: Add ECC support
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [PATCH RESEND v7 1/3] dt-bindings: can: xilinx_can: Add 'xlnx,has-ecc' optional property
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [PATCH RESEND v7 0/3] can: xilinx_can: Add ECC feature support
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [syzbot] [can?] memory leak in can_create (2)
  • From: syzbot <syzbot+521ac15269e89d8546e8@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] can: gw: fix RCU/BH usage in cgw_create_job()
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v5] can: virtio: Initial virtio CAN driver.
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH] can: bcm: add recvmsg flags for own, local and remote traffic
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [virtio-comment] [RFC PATCH v3] virtio-can: Device specification.
  • From: Mikhail Golubev-Ciuchea <mikhail.golubev-ciuchea@xxxxxxxxxxxxxxx>
• [PATCH v4] canxl: add virtual CAN network identifier support
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v5] can: virtio: Initial virtio CAN driver.
  • From: Mikhail Golubev-Ciuchea <Mikhail.Golubev-Ciuchea@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] canxl: add virtual CAN network identifier support
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v3] canxl: add virtual CAN network identifier support
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH v2] canxl: add virtual CAN network identifier support
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v3] canxl: add virtual CAN network identifier support
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v2] canxl: add virtual CAN network identifier support
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH] canxl: add virtual CAN network identifier support
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH] can: bcm: add recvmsg flags for own, local and remote traffic
  • From: Nicolas Maier <nicolas.maier.dev@xxxxxxxxx>
• Re: [PATCH] canxl: add virtual CAN network identifier support
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH] canxl: add virtual CAN network identifier support
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH] canxl: add virtual CAN network identifier support
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH] net: can: Add support for aliases in CAN
  • From: Bhavya Kapoor <b-kapoor@xxxxxx>
• [PATCH] can: m_can: remove redundant check for pm_clock_support
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• Re: [PATCH] net: can: Add support for aliases in CAN
  • From: Simon Horman <horms@xxxxxxxxxx>
• Re: [PATCH] net: can: Add support for aliases in CAN
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] net: can: Add support for aliases in CAN
  • From: Bhavya Kapoor <b-kapoor@xxxxxx>
• Re: [PATCH] phy: phy-can-transceiver: insert space after include
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [RFC] Questionable RCU/BH usage in cgw_create_job().
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [RFC PATCH] can: gw: fix RCU/BH usage in cgw_create_job()
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v11 0/2] can: esd: add support for esd GmbH PCIe/402 CAN interface
  • From: Stefan Mätje <Stefan.Maetje@xxxxxx>
• RE: [PATCH v7 0/3] can: xilinx_can: Add ECC feature support
  • From: "Goud, Srinivas" <srinivas.goud@xxxxxxx>
• Re: [syzbot] KASAN: use-after-free Read in j1939_session_get_by_addr
  • From: syzbot <syzbot+d9536adc269404a984f8@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] phy: phy-can-transceiver: insert space after include
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] phy: phy-can-transceiver: insert space after include
  • From: Wang Jinchao <wangjinchao@xxxxxxxxxxx>
• Re: [PATCH RESEND v1 2/7] dt-bindings: can: mpfs: add missing required clock
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH RESEND v1 2/7] dt-bindings: can: mpfs: add missing required clock
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH RESEND v1 2/7] dt-bindings: can: mpfs: add missing required clock
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH RESEND v1 2/7] dt-bindings: can: mpfs: add missing required clock
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH RESEND v1 2/7] dt-bindings: can: mpfs: add missing required clock
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH RESEND v1 1/7] dt-bindings: clock: mpfs: add more MSSPLL output definitions
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH RESEND v1 2/7] dt-bindings: can: mpfs: add missing required clock
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH RESEND v1 1/7] dt-bindings: clock: mpfs: add more MSSPLL output definitions
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH RESEND v1 2/7] dt-bindings: can: mpfs: add missing required clock
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH RESEND v1 2/7] dt-bindings: can: mpfs: add missing required clock
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH RESEND v1 1/7] dt-bindings: clock: mpfs: add more MSSPLL output definitions
  • From: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
• Re: [PATCH RESEND v1 0/7] MPFS clock fixes required for correct CAN clock modeling
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH RESEND v1 0/7] MPFS clock fixes required for correct CAN clock modeling
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH RESEND v1 7/7] riscv: dts: microchip: add missing CAN bus clocks
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH RESEND v1 6/7] clk: microchip: mpfs: convert MSSPLL outputs to clk_divider
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH RESEND v1 5/7] clk: microchip: mpfs: add missing MSSPLL outputs
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH RESEND v1 4/7] clk: microchip: mpfs: setup for using other mss pll outputs
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH RESEND v1 3/7] clk: microchip: mpfs: split MSSPLL in two
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH RESEND v1 2/7] dt-bindings: can: mpfs: add missing required clock
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH RESEND v1 1/7] dt-bindings: clock: mpfs: add more MSSPLL output definitions
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH RESEND v1 0/7] MPFS clock fixes required for correct CAN clock modeling
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v1 0/7] MPFS clock fixes required for correct CAN clock modeling
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v1 0/7] MPFS clock fixes required for correct CAN clock modeling
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH] can: isotp: support dynamic flow control parameters
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v1] net: can: j1939: enhanced error handling for tightly received RTS messages in xtp_rx_rts_session_new
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v1] net: can: j1939: enhanced error handling for tightly received RTS messages in xtp_rx_rts_session_new
  • From: xingwei lee <xrivendell7@xxxxxxxxx>
• Re: [syzbot] KASAN: use-after-free Read in j1939_session_get_by_addr
  • From: syzbot <syzbot+d9536adc269404a984f8@xxxxxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v1 0/2] can: mcp251xfd: better workaround broken TX FIFO STA register read
  • From: <Thomas.Kopp@xxxxxxxxxxxxx>
• [syzbot] Monthly can report (Dec 2023)
  • From: syzbot <syzbot+list8a8105c4458877154798@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC] Questionable RCU/BH usage in cgw_create_job().
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [RFC] Questionable RCU/BH usage in cgw_create_job().
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH v7 3/3] can: xilinx_can: Add ethtool stats interface for ECC errors
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [PATCH v7 2/3] can: xilinx_can: Add ECC support
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [PATCH v7 1/3] dt-bindings: can: xilinx_can: Add 'xlnx,has-ecc' optional property
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [PATCH v7 0/3] can: xilinx_can: Add ECC feature support
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• Re: RE: mcp251xfd on NXP LX2160A
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v6 3/3] can: xilinx_can: Add ethtool stats interface for ECC errors
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v6 3/3] can: xilinx_can: Add ethtool stats interface for ECC errors
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [PATCH v6 2/3] can: xilinx_can: Add ECC support
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [PATCH v6 1/3] dt-bindings: can: xilinx_can: Add 'xlnx,has-ecc' optional property
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [PATCH v6 0/3] can: xilinx_can: Add ECC feature support
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [syzbot] [can?] memory leak in j1939_netdev_start
  • From: syzbot <syzbot+1d37bef05da87b99c5a6@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] net: can: Use device_get_match_data()
  • From: Simon Horman <horms@xxxxxxxxxx>
• RE: mcp251xfd on NXP LX2160A
  • From: <Thomas.Kopp@xxxxxxxxxxxxx>
• [PATCH v2] net: can: Use device_get_match_data()
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v11 2/2] can: esd: add support for esd GmbH PCIe/402 CAN interface family
  • From: Stefan Mätje <stefan.maetje@xxxxxx>
• [PATCH v11 1/2] MAINTAINERS: add Stefan Mätje as maintainer for the esd electronics GmbH PCIe/402 CAN drivers
  • From: Stefan Mätje <stefan.maetje@xxxxxx>
• [PATCH v11 0/2] can: esd: add support for esd GmbH PCIe/402 CAN interface
  • From: Stefan Mätje <stefan.maetje@xxxxxx>
• Re: [PATCH v10 1/2] MAINTAINERS: add Stefan Mätje as maintainer for the esd electronics GmbH PCIe/402 CAN drivers
  • From: Stefan Mätje <Stefan.Maetje@xxxxxx>
• Re: [PATCH v10 2/2] can: esd: add support for esd GmbH PCIe/402 CAN interface family
  • From: Stefan Mätje <Stefan.Maetje@xxxxxx>
• Re: [PATCH v10 0/2] can: esd: add support for esd GmbH PCIe/402 CAN interface
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [PATCH v10 2/2] can: esd: add support for esd GmbH PCIe/402 CAN interface family
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [PATCH v10 1/2] MAINTAINERS: add Stefan Mätje as maintainer for the esd electronics GmbH PCIe/402 CAN drivers
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [RESEND PATCH] net: can: Use device_get_match_data()
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v10 2/2] can: esd: add support for esd GmbH PCIe/402 CAN interface family
  • From: Stefan Mätje <stefan.maetje@xxxxxx>
• [PATCH v10 1/2] MAINTAINERS: add Stefan Mätje as maintainer for the esd electronics GmbH PCIe/402 CAN drivers
  • From: Stefan Mätje <stefan.maetje@xxxxxx>
• [PATCH v10 0/2] can: esd: add support for esd GmbH PCIe/402 CAN interface
  • From: Stefan Mätje <stefan.maetje@xxxxxx>
• mcp251xfd on NXP LX2160A
  • From: petter@xxxxxxxxxx
• Re: [syzbot] KASAN: use-after-free Read in j1939_session_get_by_addr
  • From: syzbot <syzbot+d9536adc269404a984f8@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/3] dt-bindings: can: xilinx_can: Add 'xlnx,has-ecc' optional property
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v1] net: can: j1939: enhanced error handling for tightly received RTS messages in xtp_rx_rts_session_new
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v5 3/3] can: xilinx_can: Add ethtool stats interface for ECC errors
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [PATCH v5 2/3] can: xilinx_can: Add ECC support
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [PATCH v5 1/3] dt-bindings: can: xilinx_can: Add 'xlnx,has-ecc' optional property
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• [PATCH v5 0/3] can: xilinx_can: Add ECC feature support
  • From: Srinivas Goud <srinivas.goud@xxxxxxx>
• Re: [PATCH] can: j1939: prevent deadlock by changing j1939_socks_lock to rwlock
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v9 2/2] can: esd: add support for esd GmbH PCIe/402 CAN interface family
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH v9 2/2] can: esd: add support for esd GmbH PCIe/402 CAN interface family
  • From: Stefan Mätje <Stefan.Maetje@xxxxxx>
• Re: [RESEND PATCH] net: can: Use device_get_match_data()
  • From: Simon Horman <horms@xxxxxxxxxx>
• [RESEND PATCH] net: can: Use device_get_match_data()
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [syzbot] [can?] possible deadlock in j1939_sk_errqueue (2)
  • From: syzbot <syzbot+1591462f226d9cbf0564@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] can: tcan4x5x: support resuming from rx interrupt signal
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• Re: [PATCH v3 1/3] can: m_can: allow keeping the transceiver running in suspend
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• Re: [PATCH v6 00/14] can: m_can: Optimizations for m_can/tcan part 2
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• Re: [PATCH v3 3/3] dt-bindings: can: tcan4x5x: Document the wakeup-source flag
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH] can: kvaser_pciefd: Add support for Kvaser M.2 PCIe 4xCAN
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• Re: [PATCH v6 00/14] can: m_can: Optimizations for m_can/tcan part 2
  • From: Martin Hundebøll <martin@xxxxxxxxxx>
• Re: [PATCH v6 00/14] can: m_can: Optimizations for m_can/tcan part 2
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v6 00/14] can: m_can: Optimizations for m_can/tcan part 2
  • From: Martin Hundebøll <martin@xxxxxxxxxx>
• [PATCH v3 3/3] dt-bindings: can: tcan4x5x: Document the wakeup-source flag
  • From: Martin Hundebøll <martin@xxxxxxxxxx>
• [PATCH v3 0/3] can: tcan4x5x: support resume upon rx can frame
  • From: Martin Hundebøll <martin@xxxxxxxxxx>
• [PATCH v3 1/3] can: m_can: allow keeping the transceiver running in suspend
  • From: Martin Hundebøll <martin@xxxxxxxxxx>
• [PATCH v3 2/3] can: tcan4x5x: support resuming from rx interrupt signal
  • From: Martin Hundebøll <martin@xxxxxxxxxx>
• Re: [PATCH v8 2/2] can: esd: add support for esd GmbH PCIe/402 CAN interface family
  • From: Simon Horman <horms@xxxxxxxxxx>
• Re: [PATCH v9 2/2] can: esd: add support for esd GmbH PCIe/402 CAN interface family
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• [PATCH v9 2/2] can: esd: add support for esd GmbH PCIe/402 CAN interface family
  • From: Stefan Mätje <stefan.maetje@xxxxxx>
• [PATCH v9 1/2] MAINTAINERS: add Stefan Mätje as maintainer for the esd electronics GmbH PCIe/402 CAN drivers
  • From: Stefan Mätje <stefan.maetje@xxxxxx>
• [PATCH v9 0/2] can: esd: add support for esd GmbH PCIe/402 CAN interface
  • From: Stefan Mätje <stefan.maetje@xxxxxx>
• Re: [PATCH v8 2/2] can: esd: add support for esd GmbH PCIe/402 CAN interface family
  • From: Stefan Mätje <Stefan.Maetje@xxxxxx>
• Re: [PATCH] can: netlink: Fix TDCO calculation using the old data bittiming
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• PSA: this list has been migrated (no action required)
  • From: Konstantin Ryabitsev <konstantin@xxxxxxxxxxxxxxxxxxx>
• [PATCH] can: netlink: Fix TDCO calculation using the old data bittiming
  • From: Maxime Jayat <maxime.jayat@xxxxxxxxxxxxxxxxx>
• Re: [syzbot] KASAN: use-after-free Read in j1939_session_get_by_addr
  • From: syzbot <syzbot+d9536adc269404a984f8@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 5.10 86/95] can: isotp: isotp_bind(): do not validate unused address information
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5.10 87/95] can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5.10 81/95] can: isotp: set max PDU size to 64 kByte
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5.10 85/95] can: isotp: add local echo tx processing and tx without FC
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5.10 84/95] can: isotp: handle wait_event_interruptible() return values
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5.15 110/128] can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5.15 109/128] can: isotp: isotp_bind(): do not validate unused address information
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5.15 108/128] can: isotp: add local echo tx processing and tx without FC
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5.15 107/128] can: isotp: handle wait_event_interruptible() return values
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5.15 104/128] can: isotp: set max PDU size to 64 kByte
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH stable 5.10 00/10] can: isotp: upgrade to latest 6.1 LTS code base
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 2/2] can: esd: add support for esd GmbH PCIe/402 CAN interface family
  • From: Simon Horman <horms@xxxxxxxxxx>
• [syzbot] [can?] WARNING in j1939_xtp_rx_rts
  • From: syzbot <syzbot+daa36413a5cedf799ae4@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [syzbot] Monthly can report (Nov 2023)
  • From: syzbot <syzbot+list7367dbc4668559b00896@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC] Questionable RCU/BH usage in cgw_create_job().
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [RFC] Questionable RCU/BH usage in cgw_create_job().
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [RFC] Questionable RCU/BH usage in cgw_create_job().
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH stable 5.15 7/7] can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.15 6/7] can: isotp: isotp_bind(): do not validate unused address information
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.15 1/7] can: isotp: set max PDU size to 64 kByte
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.15 3/7] can: isotp: check CAN address family in isotp_bind()
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.15 2/7] can: isotp: isotp_bind(): return -EINVAL on incorrect CAN ID formatting
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.15 5/7] can: isotp: add local echo tx processing and tx without FC
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.15 4/7] can: isotp: handle wait_event_interruptible() return values
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.15 0/7] can: isotp: upgrade to latest 6.1 LTS code base
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.10 08/10] can: isotp: add local echo tx processing and tx without FC
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.10 07/10] can: isotp: handle wait_event_interruptible() return values
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.10 06/10] can: isotp: check CAN address family in isotp_bind()
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.10 10/10] can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.10 01/10] can: isotp: change error format from decimal to symbolic error names
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.10 02/10] can: isotp: add symbolic error message to isotp_module_init()
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.10 09/10] can: isotp: isotp_bind(): do not validate unused address information
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.10 03/10] can: isotp: Add error message if txqueuelen is too small
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.10 00/10] can: isotp: upgrade to latest 6.1 LTS code base
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.10 04/10] can: isotp: set max PDU size to 64 kByte
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH stable 5.10 05/10] can: isotp: isotp_bind(): return -EINVAL on incorrect CAN ID formatting
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH net-next] net: can: Use device_get_match_data()
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] can: isotp: upgrade 5.15 LTS to latest 6.6 mainline code base
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH] can: isotp: upgrade 5.15 LTS to latest 6.6 mainline code base
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] can: isotp: upgrade 5.15 LTS to latest 6.6 mainline code base
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH] can: isotp: upgrade 5.10 LTS to latest 6.6 mainline code base
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] can: isotp: upgrade 5.15 LTS to latest 6.6 mainline code base
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] can: isotp: upgrade 5.15 LTS to latest 6.6 mainline code base
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH] can: isotp: upgrade 5.10 LTS to latest 6.6 mainline code base
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v8 2/2] can: esd: add support for esd GmbH PCIe/402 CAN interface family
  • From: Stefan Mätje <stefan.maetje@xxxxxx>
• [PATCH v8 0/2] can: esd: add support for esd GmbH PCIe/402 CAN interface
  • From: Stefan Mätje <stefan.maetje@xxxxxx>
• [PATCH v8 1/2] MAINTAINERS: add Stefan Mätje as maintainer for the esd electronics GmbH PCIe/402 CAN drivers
  • From: Stefan Mätje <stefan.maetje@xxxxxx>
• Re: [syzbot] [can?] possible deadlock in j1939_session_activate
  • From: syzbot <syzbot+f32cbede7fd867ce0d56@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2] can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER)
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH AUTOSEL 6.5 16/31] can: flexcan: remove the auto stop mode for IMX93
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: Outstanding latency increase in kernel CAN gateway caught by CANlatester daily builds at 2023-10-02
  • From: Pavel Pisa <pisa@xxxxxxxxxxx>
• Re: [PATCH v6 00/14] can: m_can: Optimizations for m_can/tcan part 2
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• Re: Outstanding latency increase in kernel CAN gateway caught by CANlatester daily builds at 2023-10-02
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [mkl-can-next:rockchip-canfd 21/23] drivers/net/can/rockchip/rockchip_canfd.c:516:13: warning: variable 'cmd' set but not used
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [net-next v3 1/5] netdev: replace simple napi_schedule_prep/__napi_schedule to napi_schedule
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH net 1/6] can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH] libsocketcan: Add new functions to get/set CAN FD bittimings
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH can-next] MAINTAINERS: can: xilinx_can: remove Naga Sureshkumar Relli
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net-next] net: can: Use device_get_match_data()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [net-next v3 3/5] netdev: replace napi_reschedule with napi_schedule
  • From: Tariq Toukan <ttoukan.linux@xxxxxxxxx>
• [PATCH net-next] net: can: Use device_get_match_data()
  • From: Rob Herring <robh@xxxxxxxxxx>
• [net-next v3 5/5] netdev: use napi_schedule bool instead of napi_schedule_prep/__napi_schedule
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next v3 3/5] netdev: replace napi_reschedule with napi_schedule
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next v3 4/5] net: tc35815: rework network interface interrupt logic
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next v3 2/5] netdev: make napi_schedule return bool on NAPI successful schedule
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next v3 1/5] netdev: replace simple napi_schedule_prep/__napi_schedule to napi_schedule
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH net 5/6] can: flexcan: remove the auto stop mode for IMX93
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 1/6] can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 0/6] pull-request: can 2023-10-09
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 4/6] can: sja1000: Always restart the Tx queue after an overrun
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 3/6] arm64: dts: imx93: add the Flex-CAN stop mode by GPR
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 2/6] can: sun4i_can: Only show Kconfig if ARCH_SUNXI is set
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 6/6] can: tcan4x5x: Fix id2_register for tcan4553
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v4 4/4] spi: Use struct_size() helper
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [net-next PATCH v2 4/4] netdev: use napi_schedule bool instead of napi_schedule_prep/__napi_schedule
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• Re: [net-next PATCH v2 4/4] netdev: use napi_schedule bool instead of napi_schedule_prep/__napi_schedule
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH v2 4/4] netdev: use napi_schedule bool instead of napi_schedule_prep/__napi_schedule
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• Re: [net-next PATCH v2 3/4] netdev: replace napi_reschedule with napi_schedule
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• Re: [PATCH net-next 01/37] can: sja1000: Fix comment
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [net-next PATCH v2 3/4] netdev: replace napi_reschedule with napi_schedule
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH v2 4/4] netdev: use napi_schedule bool instead of napi_schedule_prep/__napi_schedule
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH net 1/7] can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER)
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH net-next 16/37] can: at91_can: MMR registers: convert to FIELD_PREP()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 27/37] can: at91_can: at91_poll_err(): fold in at91_poll_err_frame()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 32/37] can: at91_can: at91_irq_err_line(): make use of can_state_get_by_berr_counter()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 28/37] can: at91_can: at91_poll_err(): increase stats even if no quota left or OOM
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 37/37] can: at91_can: switch to rx-offload implementation
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 35/37] can: at91_can: at91_irq_err_line(): send error counters with state change
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 36/37] can: at91_can: at91_alloc_can_err_skb() introduce new function
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 33/37] can: at91_can: at91_irq_err_line(): take reg_sr into account for bus off
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 31/37] can: at91_can: at91_irq_err(): rename to at91_irq_err_line()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 22/37] can: at91_can: rename struct at91_priv::{tx_next,tx_echo} to {tx_head,tx_tail}
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 13/37] can: at91_can: at91_irq_tx(): remove one level of indention
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 19/37] can: at91_can: MCR Register: convert to FIELD_PREP()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 17/37] can: at91_can: MID registers: convert access to FIELD_PREP(), FIELD_GET()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 34/37] can: at91_can: at91_irq_err_line(): make use of can_change_state() and can_bus_off()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 24/37] can: at91_can: at91_chip_start(): don't disable IRQs twice
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 20/37] can: at91_can: add more register definitions
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 29/37] can: at91_can: at91_irq_err_frame(): call directly from IRQ handler
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 26/37] can: at91_can: add CAN transceiver support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 05/37] can: peak_pci: replace deprecated strncpy with strscpy
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 08/37] can: dev: can_restart(): reverse logic to remove need for goto
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 06/37] can: dev: can_restart(): don't crash kernel if carrier is OK
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 14/37] can: at91_can: BR register: convert to FIELD_PREP()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 11/37] can: dev: add can_state_get_by_berr_counter() to return the CAN state based on the current error counters
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 15/37] can: at91_can: ECR register: convert to FIELD_GET()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 07/37] can: dev: can_restart(): fix race condition between controller restart and netif_carrier_on()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 09/37] can: dev: can_restart(): move debug message and stats after successful restart
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 12/37] can: at91_can: use a consistent indention
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 21/37] can: at91_can: at91_setup_mailboxes(): update comments
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 02/37] can: etas_es58x: rework the version check logic to silence -Wformat-truncation
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 30/37] can: at91_can: at91_irq_err_frame(): move next to at91_irq_err()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 23/37] can: at91_can: at91_set_bittiming(): demote register output to debug level
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 18/37] can: at91_can: MSR Register: convert to FIELD_PREP()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 10/37] can: dev: can_put_echo_skb(): don't crash kernel if can_priv::echo_skb is accessed out of bounds
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 04/37] can: raw: Remove NULL check before dev_{put, hold}
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 25/37] can: at91_can: at91_open(): forward request_irq()'s return value in case or an error
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 01/37] can: sja1000: Fix comment
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 0/37] pull-request: can-next 2023-10-05
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>