When rx_int is used th mcp251xfd_chip_rx_int_enable and
mcp251xfd_chip_rx_int_disable function configure both PIN0 and PIN1. To
prepare the support of the GPIOS only configure PIN1 with
regmap_update_bits.
This way PIN0 can be used as GPIO while PIN1 is used as rx_int
interrupt.
Signed-off-by: Gregor Herburger <gregor.herburger@xxxxxxxxxxxxxxx>
---
drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 22 ++++++++--------------
drivers/net/can/spi/mcp251xfd/mcp251xfd.h | 6 ++++++
2 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
index 4739ad80ef2a..d8d936576c94 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
@@ -586,23 +586,21 @@ static int mcp251xfd_set_bittiming(const struct mcp251xfd_priv *priv)
static int mcp251xfd_chip_rx_int_enable(const struct mcp251xfd_priv *priv)
{
- u32 val;
+ u32 val, mask;
if (!priv->rx_int)
return 0;
- /* Configure GPIOs:
- * - PIN0: GPIO Input
- * - PIN1: GPIO Input/RX Interrupt
+ /* Configure PIN1 as RX Interrupt:
*
* PIN1 must be Input, otherwise there is a glitch on the
* rx-INT line. It happens between setting the PIN as output
* (in the first byte of the SPI transfer) and configuring the
* PIN as interrupt (in the last byte of the SPI transfer).
*/
- val = MCP251XFD_REG_IOCON_PM0 | MCP251XFD_REG_IOCON_TRIS1 |
- MCP251XFD_REG_IOCON_TRIS0;
- return regmap_write(priv->map_reg, MCP251XFD_REG_IOCON, val);
+ val = MCP251XFD_REG_IOCON_TRIS(1);
+ mask = MCP251XFD_REG_IOCON_TRIS(1) | MCP251XFD_REG_IOCON_PM(1);
+ return regmap_update_bits(priv->map_reg, MCP251XFD_REG_IOCON, mask, val);
}
static int mcp251xfd_chip_rx_int_disable(const struct mcp251xfd_priv *priv)
@@ -612,13 +610,9 @@ static int mcp251xfd_chip_rx_int_disable(const struct mcp251xfd_priv *priv)
if (!priv->rx_int)
return 0;
- /* Configure GPIOs:
- * - PIN0: GPIO Input
- * - PIN1: GPIO Input
- */
- val = MCP251XFD_REG_IOCON_PM1 | MCP251XFD_REG_IOCON_PM0 |
- MCP251XFD_REG_IOCON_TRIS1 | MCP251XFD_REG_IOCON_TRIS0;
- return regmap_write(priv->map_reg, MCP251XFD_REG_IOCON, val);
+ /* Configure PIN1 as GPIO Input */
+ val = MCP251XFD_REG_IOCON_PM(1) | MCP251XFD_REG_IOCON_TRIS(1);
+ return regmap_update_bits(priv->map_reg, MCP251XFD_REG_IOCON, val, val);
}
static int mcp251xfd_chip_ecc_init(struct mcp251xfd_priv *priv)
diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd.h b/drivers/net/can/spi/mcp251xfd/mcp251xfd.h
index 75d5a8a25415..78637223dbc8 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd.h
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd.h
@@ -335,13 +335,19 @@
#define MCP251XFD_REG_IOCON_TXCANOD BIT(28)
#define MCP251XFD_REG_IOCON_PM1 BIT(25)
#define MCP251XFD_REG_IOCON_PM0 BIT(24)
+#define MCP251XFD_REG_IOCON_PM(n) (MCP251XFD_REG_IOCON_PM0 << (n))
#define MCP251XFD_REG_IOCON_GPIO1 BIT(17)
#define MCP251XFD_REG_IOCON_GPIO0 BIT(16)
+#define MCP251XFD_REG_IOCON_GPIO(n) (MCP251XFD_REG_IOCON_GPIO0 << (n))
+#define MCP251XFD_REG_IOCON_GPIO_MASK GENMASK(17, 16)
#define MCP251XFD_REG_IOCON_LAT1 BIT(9)
#define MCP251XFD_REG_IOCON_LAT0 BIT(8)
+#define MCP251XFD_REG_IOCON_LAT(n) (MCP251XFD_REG_IOCON_LAT0 << (n))
+#define MCP251XFD_REG_IOCON_LAT_MASK GENMASK(9, 8)
#define MCP251XFD_REG_IOCON_XSTBYEN BIT(6)
#define MCP251XFD_REG_IOCON_TRIS1 BIT(1)
#define MCP251XFD_REG_IOCON_TRIS0 BIT(0)
+#define MCP251XFD_REG_IOCON_TRIS(n) (MCP251XFD_REG_IOCON_TRIS0 << (n))
#define MCP251XFD_REG_CRC 0xe08
#define MCP251XFD_REG_CRC_FERRIE BIT(25)
--
2.34.1
