This patch moves the evaluation of data[IFLA_CAN_CTRLMODE] in function
can_changelink in front of the evaluation of data[IFLA_CAN_BITTIMING].
This avoids a call to do_set_data_bittiming providing a stale
can_priv::ctrlmode with a CAN_CTRLMODE_FD flag not matching the
requested state when switching between a CAN Classic and CAN-FD bitrate.
In the same manner the evaluation of data[IFLA_CAN_CTRLMODE] in function
can_validate is also moved in front of the evaluation of
data[IFLA_CAN_BITTIMING].
This is a preparation for patches where the nominal and data bittiming
may have interdependencies on the driver side depending on the
CAN_CTRLMODE_FD flag state.
Signed-off-by: Stefan Mätje <stefan.maetje@xxxxxx>
---
drivers/net/can/dev/netlink.c | 102 +++++++++++++++++-----------------
1 file changed, 51 insertions(+), 51 deletions(-)
diff --git a/drivers/net/can/dev/netlink.c b/drivers/net/can/dev/netlink.c
index dfdc039d92a6..01aacdcda260 100644
--- a/drivers/net/can/dev/netlink.c
+++ b/drivers/net/can/dev/netlink.c
@@ -65,15 +65,6 @@ static int can_validate(struct nlattr *tb[], struct nlattr *data[],
if (!data)
return 0;
- if (data[IFLA_CAN_BITTIMING]) {
- struct can_bittiming bt;
-
- memcpy(&bt, nla_data(data[IFLA_CAN_BITTIMING]), sizeof(bt));
- err = can_validate_bittiming(&bt, extack);
- if (err)
- return err;
- }
-
if (data[IFLA_CAN_CTRLMODE]) {
struct can_ctrlmode *cm = nla_data(data[IFLA_CAN_CTRLMODE]);
u32 tdc_flags = cm->flags & CAN_CTRLMODE_TDC_MASK;
@@ -114,6 +105,15 @@ static int can_validate(struct nlattr *tb[], struct nlattr *data[],
}
}
+ if (data[IFLA_CAN_BITTIMING]) {
+ struct can_bittiming bt;
+
+ memcpy(&bt, nla_data(data[IFLA_CAN_BITTIMING]), sizeof(bt));
+ err = can_validate_bittiming(&bt, extack);
+ if (err)
+ return err;
+ }
+
if (is_can_fd) {
if (!data[IFLA_CAN_BITTIMING] || !data[IFLA_CAN_DATA_BITTIMING])
return -EOPNOTSUPP;
@@ -195,48 +195,6 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[],
/* We need synchronization with dev->stop() */
ASSERT_RTNL();
- if (data[IFLA_CAN_BITTIMING]) {
- struct can_bittiming bt;
-
- /* Do not allow changing bittiming while running */
- if (dev->flags & IFF_UP)
- return -EBUSY;
-
- /* Calculate bittiming parameters based on
- * bittiming_const if set, otherwise pass bitrate
- * directly via do_set_bitrate(). Bail out if neither
- * is given.
- */
- if (!priv->bittiming_const && !priv->do_set_bittiming &&
- !priv->bitrate_const)
- return -EOPNOTSUPP;
-
- memcpy(&bt, nla_data(data[IFLA_CAN_BITTIMING]), sizeof(bt));
- err = can_get_bittiming(dev, &bt,
- priv->bittiming_const,
- priv->bitrate_const,
- priv->bitrate_const_cnt,
- extack);
- if (err)
- return err;
-
- if (priv->bitrate_max && bt.bitrate > priv->bitrate_max) {
- NL_SET_ERR_MSG_FMT(extack,
- "arbitration bitrate %u bps surpasses transceiver capabilities of %u bps",
- bt.bitrate, priv->bitrate_max);
- return -EINVAL;
- }
-
- memcpy(&priv->bittiming, &bt, sizeof(bt));
-
- if (priv->do_set_bittiming) {
- /* Finally, set the bit-timing registers */
- err = priv->do_set_bittiming(dev);
- if (err)
- return err;
- }
- }
-
if (data[IFLA_CAN_CTRLMODE]) {
struct can_ctrlmode *cm;
u32 ctrlstatic;
@@ -284,6 +242,48 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[],
priv->ctrlmode &= cm->flags | ~CAN_CTRLMODE_TDC_MASK;
}
+ if (data[IFLA_CAN_BITTIMING]) {
+ struct can_bittiming bt;
+
+ /* Do not allow changing bittiming while running */
+ if (dev->flags & IFF_UP)
+ return -EBUSY;
+
+ /* Calculate bittiming parameters based on
+ * bittiming_const if set, otherwise pass bitrate
+ * directly via do_set_bitrate(). Bail out if neither
+ * is given.
+ */
+ if (!priv->bittiming_const && !priv->do_set_bittiming &&
+ !priv->bitrate_const)
+ return -EOPNOTSUPP;
+
+ memcpy(&bt, nla_data(data[IFLA_CAN_BITTIMING]), sizeof(bt));
+ err = can_get_bittiming(dev, &bt,
+ priv->bittiming_const,
+ priv->bitrate_const,
+ priv->bitrate_const_cnt,
+ extack);
+ if (err)
+ return err;
+
+ if (priv->bitrate_max && bt.bitrate > priv->bitrate_max) {
+ NL_SET_ERR_MSG_FMT(extack,
+ "arbitration bitrate %u bps surpasses transceiver capabilities of %u bps",
+ bt.bitrate, priv->bitrate_max);
+ return -EINVAL;
+ }
+
+ memcpy(&priv->bittiming, &bt, sizeof(bt));
+
+ if (priv->do_set_bittiming) {
+ /* Finally, set the bit-timing registers */
+ err = priv->do_set_bittiming(dev);
+ if (err)
+ return err;
+ }
+ }
+
if (data[IFLA_CAN_RESTART_MS]) {
/* Do not allow changing restart delay while running */
if (dev->flags & IFF_UP)
base-commit: ae44fa998ee280303ee5dffe99cb669e4c245706
--
2.34.1
