Re: [PATCH v1] can: mcp251xfd: Enable transceiver using gpio

[Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>]

Le 06/08/2024 à 11:03, Anup Kulkarni a écrit :
> Ensure the CAN transceiver is active during mcp251xfd_open() and
> inactive during mcp251xfd_close() by utilizing
> mcp251xfd_transceiver_mode(). Adjust GPIO_0 to switch between
> NORMAL and STANDBY modes of transceiver.
>
> Signed-off-by: Anup Kulkarni <quic_anupkulk@xxxxxxxxxxx>
> ---
>   .../net/can/spi/mcp251xfd/mcp251xfd-core.c    | 32 +++++++++++++++++++
>   drivers/net/can/spi/mcp251xfd/mcp251xfd.h     |  7 ++++
>   2 files changed, 39 insertions(+)
>
> diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
> index 3e7526274e34..3b56dc1721a5 100644
> --- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
> +++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
> @@ -153,6 +153,25 @@ static inline int mcp251xfd_vdd_disable(const struct mcp251xfd_priv *priv)
>   	return regulator_disable(priv->reg_vdd);
>   }
>   
> +static int
> +mcp251xfd_transceiver_mode(const struct mcp251xfd_priv *priv,
> +			   const enum mcp251xfd_xceiver_mode mode)
> +{
> +	int val, pmode, latch;
> +
> +	if (mode == MCP251XFD_XCVR_NORMAL_MODE) {
> +		pmode = MCP251XFD_REG_IOCON_PM0;
> +		latch = 0;
> +	} else if (mode == MCP251XFD_XCVR_STBY_MODE) {
> +		pmode = MCP251XFD_REG_IOCON_PM0;
> +		latch = MCP251XFD_REG_IOCON_LAT0;
> +	} else {
> +		return -EINVAL;
> +	}
> +	val = (pmode | latch) << priv->transceiver_pin;
> +	return regmap_write(priv->map_reg, MCP251XFD_REG_IOCON, val);
> +}
> +
>   static inline int
>   mcp251xfd_transceiver_enable(const struct mcp251xfd_priv *priv)
>   {
> @@ -1620,6 +1639,10 @@ static int mcp251xfd_open(struct net_device *ndev)
>   	if (err)
>   		goto out_transceiver_disable;
>   
> +	err = mcp251xfd_transceiver_mode(priv, MCP251XFD_XCVR_NORMAL_MODE);
> +	if (err)
> +		goto out_transceiver_disable;
> +
>   	clear_bit(MCP251XFD_FLAGS_DOWN, priv->flags);
>   	can_rx_offload_enable(&priv->offload);
>   
> @@ -1668,6 +1691,7 @@ static int mcp251xfd_open(struct net_device *ndev)
>   
>   static int mcp251xfd_stop(struct net_device *ndev)
>   {
> +	int err;
>   	struct mcp251xfd_priv *priv = netdev_priv(ndev);
>   
>   	netif_stop_queue(ndev);
> @@ -1678,6 +1702,9 @@ static int mcp251xfd_stop(struct net_device *ndev)
>   	free_irq(ndev->irq, priv);
>   	destroy_workqueue(priv->wq);
>   	can_rx_offload_disable(&priv->offload);
> +	err = mcp251xfd_transceiver_mode(priv, MCP251XFD_XCVR_STBY_MODE);
> +	if (err)
> +		return err;
>   	mcp251xfd_chip_stop(priv, CAN_STATE_STOPPED);
>   	mcp251xfd_transceiver_disable(priv);
>   	mcp251xfd_ring_free(priv);
> @@ -2051,6 +2078,11 @@ static int mcp251xfd_probe(struct spi_device *spi)
>   					     "Failed to get clock-frequency!\n");
>   	}
>   
> +	err = device_property_read_u32(&spi->dev, "gpio-transceiver-pin", &priv->transceiver_pin);
> +		if (err)

Hi,

looks like indentation is 1 tab too far.

CJ

> +			return dev_err_probe(&spi->dev, err,
> +					     "Failed to get gpio transceiver pin!\n");
> +
>   	/* Sanity check */
>   	if (freq < MCP251XFD_SYSCLOCK_HZ_MIN ||
>   	    freq > MCP251XFD_SYSCLOCK_HZ_MAX) {
> diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd.h b/drivers/net/can/spi/mcp251xfd/mcp251xfd.h
> index dcbbd2b2fae8..14b086814bdb 100644
> --- a/drivers/net/can/spi/mcp251xfd/mcp251xfd.h
> +++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd.h
> @@ -614,6 +614,12 @@ enum mcp251xfd_flags {
>   	__MCP251XFD_FLAGS_SIZE__
>   };
>   
> +enum mcp251xfd_xceiver_mode {
> +	MCP251XFD_XCVR_NORMAL_MODE,
> +	MCP251XFD_XCVR_STBY_MODE,
> +	MCP251XFD_XCVR_MODE_NONE
> +};
> +
>   struct mcp251xfd_priv {
>   	struct can_priv can;
>   	struct can_rx_offload offload;
> @@ -670,6 +676,7 @@ struct mcp251xfd_priv {
>   
>   	struct mcp251xfd_devtype_data devtype_data;
>   	struct can_berr_counter bec;
> +	u32 transceiver_pin;
>   };
>   
>   #define MCP251XFD_IS(_model) \