Linux CAN Development

• Date Index

• Re: [PATCH v1] net: can: j1939: enhanced error handling for tightly received RTS messages in xtp_rx_rts_session_new, (continued)
  • Re: [PATCH v1] net: can: j1939: enhanced error handling for tightly received RTS messages in xtp_rx_rts_session_new, xingwei lee
    • Re: [PATCH v1] net: can: j1939: enhanced error handling for tightly received RTS messages in xtp_rx_rts_session_new, Oleksij Rempel
• [PATCH v5 0/3] can: xilinx_can: Add ECC feature support, Srinivas Goud
  • [PATCH v5 1/3] dt-bindings: can: xilinx_can: Add 'xlnx,has-ecc' optional property, Srinivas Goud
    • Re: [PATCH v5 1/3] dt-bindings: can: xilinx_can: Add 'xlnx,has-ecc' optional property, Conor Dooley
  • [PATCH v5 2/3] can: xilinx_can: Add ECC support, Srinivas Goud
  • [PATCH v5 3/3] can: xilinx_can: Add ethtool stats interface for ECC errors, Srinivas Goud
• [RESEND PATCH] net: can: Use device_get_match_data(), Rob Herring
  • Re: [RESEND PATCH] net: can: Use device_get_match_data(), Simon Horman
    • Re: [RESEND PATCH] net: can: Use device_get_match_data(), Rob Herring
• [PATCH] can: kvaser_pciefd: Add support for Kvaser M.2 PCIe 4xCAN, Jimmy Assarsson
  • Re: [PATCH] can: kvaser_pciefd: Add support for Kvaser M.2 PCIe 4xCAN, Jimmy Assarsson
• [PATCH v3 0/3] can: tcan4x5x: support resume upon rx can frame, Martin Hundebøll
  • [PATCH v3 2/3] can: tcan4x5x: support resuming from rx interrupt signal, Martin Hundebøll
    • Re: [PATCH v3 2/3] can: tcan4x5x: support resuming from rx interrupt signal, Markus Schneider-Pargmann
  • [PATCH v3 1/3] can: m_can: allow keeping the transceiver running in suspend, Martin Hundebøll
    • Re: [PATCH v3 1/3] can: m_can: allow keeping the transceiver running in suspend, Markus Schneider-Pargmann
  • [PATCH v3 3/3] dt-bindings: can: tcan4x5x: Document the wakeup-source flag, Martin Hundebøll
    • Re: [PATCH v3 3/3] dt-bindings: can: tcan4x5x: Document the wakeup-source flag, Conor Dooley
• [PATCH v9 0/2] can: esd: add support for esd GmbH PCIe/402 CAN interface, Stefan Mätje
  • [PATCH v9 1/2] MAINTAINERS: add Stefan Mätje as maintainer for the esd electronics GmbH PCIe/402 CAN drivers, Stefan Mätje
  • [PATCH v9 2/2] can: esd: add support for esd GmbH PCIe/402 CAN interface family, Stefan Mätje
    • Re: [PATCH v9 2/2] can: esd: add support for esd GmbH PCIe/402 CAN interface family, Vincent MAILHOL
      • Re: [PATCH v9 2/2] can: esd: add support for esd GmbH PCIe/402 CAN interface family, Stefan Mätje
        • Re: [PATCH v9 2/2] can: esd: add support for esd GmbH PCIe/402 CAN interface family, Vincent MAILHOL
• PSA: this list has been migrated (no action required), Konstantin Ryabitsev
• [PATCH] can: netlink: Fix TDCO calculation using the old data bittiming, Maxime Jayat
  • Re: [PATCH] can: netlink: Fix TDCO calculation using the old data bittiming, Vincent MAILHOL
    • Re: [PATCH] can: netlink: Fix TDCO calculation using the old data bittiming, Oliver Hartkopp
      • Re: [PATCH] can: netlink: Fix TDCO calculation using the old data bittiming, Marc Kleine-Budde
        • Re: [PATCH] can: netlink: Fix TDCO calculation using the old data bittiming, Oliver Hartkopp
• [PATCH 5.10 86/95] can: isotp: isotp_bind(): do not validate unused address information, Greg Kroah-Hartman
• [PATCH 5.10 87/95] can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior, Greg Kroah-Hartman
• [PATCH 5.10 81/95] can: isotp: set max PDU size to 64 kByte, Greg Kroah-Hartman
• [PATCH 5.10 85/95] can: isotp: add local echo tx processing and tx without FC, Greg Kroah-Hartman
• [PATCH 5.10 84/95] can: isotp: handle wait_event_interruptible() return values, Greg Kroah-Hartman
• [PATCH 5.15 110/128] can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior, Greg Kroah-Hartman
• [PATCH 5.15 109/128] can: isotp: isotp_bind(): do not validate unused address information, Greg Kroah-Hartman
• [PATCH 5.15 108/128] can: isotp: add local echo tx processing and tx without FC, Greg Kroah-Hartman
• [PATCH 5.15 107/128] can: isotp: handle wait_event_interruptible() return values, Greg Kroah-Hartman
• [PATCH 5.15 104/128] can: isotp: set max PDU size to 64 kByte, Greg Kroah-Hartman
• [syzbot] [can?] WARNING in j1939_xtp_rx_rts, syzbot
• [syzbot] Monthly can report (Nov 2023), syzbot
• [RFC] Questionable RCU/BH usage in cgw_create_job()., Sebastian Andrzej Siewior
  • Re: [RFC] Questionable RCU/BH usage in cgw_create_job()., Oliver Hartkopp
    • Re: [RFC] Questionable RCU/BH usage in cgw_create_job()., Sebastian Andrzej Siewior
      • Re: [RFC] Questionable RCU/BH usage in cgw_create_job()., Sebastian Andrzej Siewior
        • Re: [RFC] Questionable RCU/BH usage in cgw_create_job()., Oliver Hartkopp
          • Re: [RFC] Questionable RCU/BH usage in cgw_create_job()., Oliver Hartkopp
• [PATCH stable 5.15 0/7] can: isotp: upgrade to latest 6.1 LTS code base, Oliver Hartkopp
  • [PATCH stable 5.15 4/7] can: isotp: handle wait_event_interruptible() return values, Oliver Hartkopp
  • [PATCH stable 5.15 5/7] can: isotp: add local echo tx processing and tx without FC, Oliver Hartkopp
  • [PATCH stable 5.15 2/7] can: isotp: isotp_bind(): return -EINVAL on incorrect CAN ID formatting, Oliver Hartkopp
  • [PATCH stable 5.15 3/7] can: isotp: check CAN address family in isotp_bind(), Oliver Hartkopp
  • [PATCH stable 5.15 1/7] can: isotp: set max PDU size to 64 kByte, Oliver Hartkopp
  • [PATCH stable 5.15 6/7] can: isotp: isotp_bind(): do not validate unused address information, Oliver Hartkopp
  • [PATCH stable 5.15 7/7] can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior, Oliver Hartkopp
• [PATCH stable 5.10 00/10] can: isotp: upgrade to latest 6.1 LTS code base, Oliver Hartkopp
  • [PATCH stable 5.10 05/10] can: isotp: isotp_bind(): return -EINVAL on incorrect CAN ID formatting, Oliver Hartkopp
  • [PATCH stable 5.10 04/10] can: isotp: set max PDU size to 64 kByte, Oliver Hartkopp
  • [PATCH stable 5.10 03/10] can: isotp: Add error message if txqueuelen is too small, Oliver Hartkopp
  • [PATCH stable 5.10 09/10] can: isotp: isotp_bind(): do not validate unused address information, Oliver Hartkopp
  • [PATCH stable 5.10 02/10] can: isotp: add symbolic error message to isotp_module_init(), Oliver Hartkopp
  • [PATCH stable 5.10 01/10] can: isotp: change error format from decimal to symbolic error names, Oliver Hartkopp
  • [PATCH stable 5.10 10/10] can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior, Oliver Hartkopp
  • [PATCH stable 5.10 06/10] can: isotp: check CAN address family in isotp_bind(), Oliver Hartkopp
  • [PATCH stable 5.10 07/10] can: isotp: handle wait_event_interruptible() return values, Oliver Hartkopp
  • [PATCH stable 5.10 08/10] can: isotp: add local echo tx processing and tx without FC, Oliver Hartkopp
  • Re: [PATCH stable 5.10 00/10] can: isotp: upgrade to latest 6.1 LTS code base, Greg KH
• [PATCH] can: isotp: upgrade 5.15 LTS to latest 6.6 mainline code base, Oliver Hartkopp
  • Re: [PATCH] can: isotp: upgrade 5.15 LTS to latest 6.6 mainline code base, Greg KH
    • Re: [PATCH] can: isotp: upgrade 5.15 LTS to latest 6.6 mainline code base, Oliver Hartkopp
      • Re: [PATCH] can: isotp: upgrade 5.15 LTS to latest 6.6 mainline code base, Greg KH
        • Re: [PATCH] can: isotp: upgrade 5.15 LTS to latest 6.6 mainline code base, Oliver Hartkopp
• [PATCH] can: isotp: upgrade 5.10 LTS to latest 6.6 mainline code base, Oliver Hartkopp
  • Re: [PATCH] can: isotp: upgrade 5.10 LTS to latest 6.6 mainline code base, Greg KH
• [PATCH v8 0/2] can: esd: add support for esd GmbH PCIe/402 CAN interface, Stefan Mätje
  • [PATCH v8 1/2] MAINTAINERS: add Stefan Mätje as maintainer for the esd electronics GmbH PCIe/402 CAN drivers, Stefan Mätje
  • [PATCH v8 2/2] can: esd: add support for esd GmbH PCIe/402 CAN interface family, Stefan Mätje
    • Re: [PATCH v8 2/2] can: esd: add support for esd GmbH PCIe/402 CAN interface family, Simon Horman
      • Re: [PATCH v8 2/2] can: esd: add support for esd GmbH PCIe/402 CAN interface family, Stefan Mätje
        • Re: [PATCH v8 2/2] can: esd: add support for esd GmbH PCIe/402 CAN interface family, Simon Horman
• [PATCH v2] can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER), Oleksij Rempel
• [PATCH AUTOSEL 6.5 16/31] can: flexcan: remove the auto stop mode for IMX93, Sasha Levin
• [mkl-can-next:rockchip-canfd 21/23] drivers/net/can/rockchip/rockchip_canfd.c:516:13: warning: variable 'cmd' set but not used, kernel test robot
• [PATCH can-next] MAINTAINERS: can: xilinx_can: remove Naga Sureshkumar Relli, Marc Kleine-Budde
• [PATCH net-next] net: can: Use device_get_match_data(), Rob Herring
  • Re: [PATCH net-next] net: can: Use device_get_match_data(), Marc Kleine-Budde
    • Re: [PATCH net-next] net: can: Use device_get_match_data(), Rob Herring
• [net-next v3 1/5] netdev: replace simple napi_schedule_prep/__napi_schedule to napi_schedule, Christian Marangi
  • [net-next v3 2/5] netdev: make napi_schedule return bool on NAPI successful schedule, Christian Marangi
  • [net-next v3 4/5] net: tc35815: rework network interface interrupt logic, Christian Marangi
  • [net-next v3 3/5] netdev: replace napi_reschedule with napi_schedule, Christian Marangi
    • Re: [net-next v3 3/5] netdev: replace napi_reschedule with napi_schedule, Tariq Toukan
  • [net-next v3 5/5] netdev: use napi_schedule bool instead of napi_schedule_prep/__napi_schedule, Christian Marangi
  • Re: [net-next v3 1/5] netdev: replace simple napi_schedule_prep/__napi_schedule to napi_schedule, patchwork-bot+netdevbpf
• [PATCH net 0/6] pull-request: can 2023-10-09, Marc Kleine-Budde
  • [PATCH net 6/6] can: tcan4x5x: Fix id2_register for tcan4553, Marc Kleine-Budde
  • [PATCH net 2/6] can: sun4i_can: Only show Kconfig if ARCH_SUNXI is set, Marc Kleine-Budde
  • [PATCH net 3/6] arm64: dts: imx93: add the Flex-CAN stop mode by GPR, Marc Kleine-Budde
  • [PATCH net 4/6] can: sja1000: Always restart the Tx queue after an overrun, Marc Kleine-Budde
  • [PATCH net 1/6] can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior, Marc Kleine-Budde
    • Re: [PATCH net 1/6] can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior, patchwork-bot+netdevbpf
  • [PATCH net 5/6] can: flexcan: remove the auto stop mode for IMX93, Marc Kleine-Budde
• Re: [PATCH v4 4/4] spi: Use struct_size() helper, Marc Kleine-Budde
• [PATCH net-next 0/37] pull-request: can-next 2023-10-05, Marc Kleine-Budde
  • [PATCH net-next 03/37] can: etas_es58x: add missing a blank line after declaration, Marc Kleine-Budde
  • [PATCH net-next 01/37] can: sja1000: Fix comment, Marc Kleine-Budde
    • Re: [PATCH net-next 01/37] can: sja1000: Fix comment, patchwork-bot+netdevbpf
  • [PATCH net-next 25/37] can: at91_can: at91_open(): forward request_irq()'s return value in case or an error, Marc Kleine-Budde
  • [PATCH net-next 04/37] can: raw: Remove NULL check before dev_{put, hold}, Marc Kleine-Budde
  • [PATCH net-next 10/37] can: dev: can_put_echo_skb(): don't crash kernel if can_priv::echo_skb is accessed out of bounds, Marc Kleine-Budde
  • [PATCH net-next 18/37] can: at91_can: MSR Register: convert to FIELD_PREP(), Marc Kleine-Budde
  • [PATCH net-next 23/37] can: at91_can: at91_set_bittiming(): demote register output to debug level, Marc Kleine-Budde
  • [PATCH net-next 30/37] can: at91_can: at91_irq_err_frame(): move next to at91_irq_err(), Marc Kleine-Budde
  • [PATCH net-next 02/37] can: etas_es58x: rework the version check logic to silence -Wformat-truncation, Marc Kleine-Budde
  • [PATCH net-next 21/37] can: at91_can: at91_setup_mailboxes(): update comments, Marc Kleine-Budde
  • [PATCH net-next 12/37] can: at91_can: use a consistent indention, Marc Kleine-Budde
  • [PATCH net-next 09/37] can: dev: can_restart(): move debug message and stats after successful restart, Marc Kleine-Budde
  • [PATCH net-next 07/37] can: dev: can_restart(): fix race condition between controller restart and netif_carrier_on(), Marc Kleine-Budde
  • [PATCH net-next 15/37] can: at91_can: ECR register: convert to FIELD_GET(), Marc Kleine-Budde
  • [PATCH net-next 11/37] can: dev: add can_state_get_by_berr_counter() to return the CAN state based on the current error counters, Marc Kleine-Budde
  • [PATCH net-next 14/37] can: at91_can: BR register: convert to FIELD_PREP(), Marc Kleine-Budde
  • [PATCH net-next 06/37] can: dev: can_restart(): don't crash kernel if carrier is OK, Marc Kleine-Budde
  • [PATCH net-next 08/37] can: dev: can_restart(): reverse logic to remove need for goto, Marc Kleine-Budde
  • [PATCH net-next 05/37] can: peak_pci: replace deprecated strncpy with strscpy, Marc Kleine-Budde
  • [PATCH net-next 26/37] can: at91_can: add CAN transceiver support, Marc Kleine-Budde
  • [PATCH net-next 29/37] can: at91_can: at91_irq_err_frame(): call directly from IRQ handler, Marc Kleine-Budde
  • [PATCH net-next 20/37] can: at91_can: add more register definitions, Marc Kleine-Budde
  • [PATCH net-next 24/37] can: at91_can: at91_chip_start(): don't disable IRQs twice, Marc Kleine-Budde
  • [PATCH net-next 34/37] can: at91_can: at91_irq_err_line(): make use of can_change_state() and can_bus_off(), Marc Kleine-Budde
  • [PATCH net-next 17/37] can: at91_can: MID registers: convert access to FIELD_PREP(), FIELD_GET(), Marc Kleine-Budde
  • [PATCH net-next 19/37] can: at91_can: MCR Register: convert to FIELD_PREP(), Marc Kleine-Budde
  • [PATCH net-next 13/37] can: at91_can: at91_irq_tx(): remove one level of indention, Marc Kleine-Budde
  • [PATCH net-next 22/37] can: at91_can: rename struct at91_priv::{tx_next,tx_echo} to {tx_head,tx_tail}, Marc Kleine-Budde
  • [PATCH net-next 31/37] can: at91_can: at91_irq_err(): rename to at91_irq_err_line(), Marc Kleine-Budde
  • [PATCH net-next 33/37] can: at91_can: at91_irq_err_line(): take reg_sr into account for bus off, Marc Kleine-Budde
  • [PATCH net-next 36/37] can: at91_can: at91_alloc_can_err_skb() introduce new function, Marc Kleine-Budde
  • [PATCH net-next 35/37] can: at91_can: at91_irq_err_line(): send error counters with state change, Marc Kleine-Budde
  • [PATCH net-next 37/37] can: at91_can: switch to rx-offload implementation, Marc Kleine-Budde
  • [PATCH net-next 28/37] can: at91_can: at91_poll_err(): increase stats even if no quota left or OOM, Marc Kleine-Budde
  • [PATCH net-next 32/37] can: at91_can: at91_irq_err_line(): make use of can_state_get_by_berr_counter(), Marc Kleine-Budde
  • [PATCH net-next 27/37] can: at91_can: at91_poll_err(): fold in at91_poll_err_frame(), Marc Kleine-Budde
  • [PATCH net-next 16/37] can: at91_can: MMR registers: convert to FIELD_PREP(), Marc Kleine-Budde
• [PATCH v2 0/5] can: dev: fix can_restart() and replace BUG_ON() by error handling, Marc Kleine-Budde
  • [PATCH v2 2/5] can: dev: can_restart(): fix race condition between controller restart and netif_carrier_on(), Marc Kleine-Budde
  • [PATCH v2 1/5] can: dev: can_restart(): don't crash kernel if carrier is OK, Marc Kleine-Budde
  • [PATCH v2 4/5] can: dev: can_restart(): update debug and error messages, Marc Kleine-Budde
    • Re: [PATCH v2 4/5] can: dev: can_restart(): update debug and error messages, Vincent Mailhol
      • Re: [PATCH v2 4/5] can: dev: can_restart(): update debug and error messages, Marc Kleine-Budde
  • [PATCH v2 3/5] can: dev: can_restart(): reverse logic to remove need for goto, Marc Kleine-Budde
  • [PATCH v2 5/5] can: dev: can_put_echo_skb(): don't crash kernel if can_priv::echo_skb is accessed out of bounds, Marc Kleine-Budde
  • Re: [PATCH v2 0/5] can: dev: fix can_restart() and replace BUG_ON() by error handling, Vincent Mailhol
    • Re: [PATCH v2 0/5] can: dev: fix can_restart() and replace BUG_ON() by error handling, Marc Kleine-Budde
• [PATCH net 0/7] pull-request: can 2023-10-05, Marc Kleine-Budde
  • [PATCH net 6/7] arm64: dts: imx93: add the Flex-CAN stop mode by GPR, Marc Kleine-Budde
  • [PATCH net 5/7] can: tcan4x5x: Fix id2_register for tcan4553, Marc Kleine-Budde
  • [PATCH net 1/7] can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER), Marc Kleine-Budde
    • Re: [PATCH net 1/7] can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER), Jakub Kicinski
      • Re: [PATCH net 1/7] can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER), Oleksij Rempel
  • [PATCH net 3/7] can: sun4i_can: Only show Kconfig if ARCH_SUNXI is set, Marc Kleine-Budde
  • [PATCH net 2/7] can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior, Marc Kleine-Budde
  • [PATCH net 7/7] can: flexcan: remove the auto stop mode for IMX93, Marc Kleine-Budde
  • [PATCH net 4/7] can: sja1000: Always restart the Tx queue after an overrun, Marc Kleine-Budde
• [PATCH v2 00/27] can: at91: add can_state_get_by_berr_counter() helper, cleanup and convert to rx_offload, Marc Kleine-Budde
  • [PATCH v2 25/27] can: at91_can: at91_irq_err_line(): send error counters with state change, Marc Kleine-Budde
  • [PATCH v2 08/27] can: at91_can: MSR Register: convert to FIELD_PREP(), Marc Kleine-Budde
  • [PATCH v2 23/27] can: at91_can: at91_irq_err_line(): take reg_sr into account for bus off, Marc Kleine-Budde
  • [PATCH v2 18/27] can: at91_can: at91_poll_err(): increase stats even if no quota left or OOM, Marc Kleine-Budde
  • [PATCH v2 21/27] can: at91_can: at91_irq_err(): rename to at91_irq_err_line(), Marc Kleine-Budde
  • [PATCH v2 17/27] can: at91_can: at91_poll_err(): fold in at91_poll_err_frame(), Marc Kleine-Budde
  • [PATCH v2 13/27] can: at91_can: at91_set_bittiming(): demote register output to debug level, Marc Kleine-Budde
  • [PATCH v2 24/27] can: at91_can: at91_irq_err_line(): make use of can_change_state() and can_bus_off(), Marc Kleine-Budde
  • [PATCH v2 20/27] can: at91_can: at91_irq_err_frame(): move next to at91_irq_err(), Marc Kleine-Budde
  • [PATCH v2 11/27] can: at91_can: at91_setup_mailboxes(): update comments, Marc Kleine-Budde
  • [PATCH v2 01/27] can: dev: add can_state_get_by_berr_counter() to return the CAN state based on the current error counters, Marc Kleine-Budde
  • [PATCH v2 05/27] can: at91_can: ECR register: convert to FIELD_GET(), Marc Kleine-Budde
  • [PATCH v2 09/27] can: at91_can: MCR Register: convert to FIELD_PREP(), Marc Kleine-Budde
  • [PATCH v2 06/27] can: at91_can: MMR registers: convert to FIELD_PREP(), Marc Kleine-Budde
  • [PATCH v2 26/27] can: at91_can: at91_alloc_can_err_skb() introduce new function, Marc Kleine-Budde
  • [PATCH v2 04/27] can: at91_can: BR register: convert to FIELD_PREP(), Marc Kleine-Budde
  • [PATCH v2 02/27] can: at91_can: use a consistent indention, Marc Kleine-Budde
  • [PATCH v2 15/27] can: at91_can: at91_open(): forward request_irq()'s return value in case or an error, Marc Kleine-Budde
  • [PATCH v2 03/27] can: at91_can: at91_irq_tx(): remove one level of indention, Marc Kleine-Budde
  • [PATCH v2 22/27] can: at91_can: at91_irq_err_line(): make use of can_state_get_by_berr_counter(), Marc Kleine-Budde
  • [PATCH v2 10/27] can: at91_can: add more register definitions, Marc Kleine-Budde
  • [PATCH v2 12/27] can: at91_can: rename struct at91_priv::{tx_next,tx_echo} to {tx_head,tx_tail}, Marc Kleine-Budde
  • [PATCH v2 19/27] can: at91_can: at91_irq_err_frame(): call directly from IRQ handler, Marc Kleine-Budde
  • [PATCH v2 14/27] can: at91_can: at91_chip_start(): don't disable IRQs twice, Marc Kleine-Budde
  • [PATCH v2 16/27] can: at91_can: add CAN transceiver support, Marc Kleine-Budde
  • [PATCH v2 27/27] can: at91_can: switch to rx-offload implementation, Marc Kleine-Budde
  • [PATCH v2 07/27] can: at91_can: MID registers: convert access to FIELD_PREP(), FIELD_GET(), Marc Kleine-Budde
• [PATCH] can: peak_pci: replace deprecated strncpy with strscpy, Justin Stitt
  • Re: [PATCH] can: peak_pci: replace deprecated strncpy with strscpy, Kees Cook
  • Re: [PATCH] can: peak_pci: replace deprecated strncpy with strscpy, Marc Kleine-Budde
• [PATCH 00/27] can: at91: add can_state_get_by_berr_counter() helper, cleanup and convert to rx_offload, Marc Kleine-Budde
  • [PATCH 09/27] can: at91_can: MCR Register: convert to FIELD_PREP(), Marc Kleine-Budde
  • [PATCH 06/27] can: at91_can: MMR registers: convert to FIELD_PREP(), Marc Kleine-Budde
  • [PATCH 01/27] can: dev: add can_state_get_by_berr_counter() to return the CAN state based on the current error counters, Marc Kleine-Budde
    • Re: [PATCH 01/27] can: dev: add can_state_get_by_berr_counter() to return the CAN state based on the current error counters, Vincent Mailhol
      • Re: [PATCH 01/27] can: dev: add can_state_get_by_berr_counter() to return the CAN state based on the current error counters, Marc Kleine-Budde
  • [PATCH 05/27] can: at91_can: ECR register: convert to FIELD_GET(), Marc Kleine-Budde
  • [PATCH 03/27] can: at91_can: at91_irq_tx(): remove one level of indention, Marc Kleine-Budde
  • [PATCH 02/27] can: at91_can: use a consistent indention, Marc Kleine-Budde
  • [PATCH 08/27] can: at91_can: MSR Register: convert to FIELD_PREP(), Marc Kleine-Budde
  • [PATCH 04/27] can: at91_can: BR register: convert to FIELD_PREP(), Marc Kleine-Budde
  • [PATCH 10/27] can: at91_can: add more register definitions, Marc Kleine-Budde
  • [PATCH 07/27] can: at91_can: MID registers: convert access to FIELD_PREP(), FIELD_GET(), Marc Kleine-Budde
  • [PATCH 12/27] can: at91_can: rename struct at91_priv::{tx_next,tx_echo} to {tx_head,tx_tail}, Marc Kleine-Budde
  • [PATCH 17/27] can: at91_can: at91_poll_err(): fold in at91_poll_err_frame(), Marc Kleine-Budde
  • [PATCH 11/27] can: at91_can: at91_setup_mailboxes(): update comments, Marc Kleine-Budde
  • [PATCH 14/27] can: at91_can: at91_chip_start(): don't disable IRQs twice, Marc Kleine-Budde
  • [PATCH 15/27] can: at91_can: at91_open(): forward request_irq()'s return value in case or an error, Marc Kleine-Budde
  • [PATCH 13/27] can: at91_can: at91_set_bittiming(): demote register output to debug level, Marc Kleine-Budde
  • [PATCH 16/27] can: at91_can: add CAN transceiver support, Marc Kleine-Budde
  • [PATCH 19/27] can: at91_can: at91_irq_err_frame(): call directly from IRQ handler, Marc Kleine-Budde
  • [PATCH 18/27] can: at91_can: at91_poll_err(): increase stats even if no quota left or OOM, Marc Kleine-Budde
  • [PATCH 25/27] can: at91_can: at91_irq_err_line(): send error counters with state change, Marc Kleine-Budde
  • [PATCH 22/27] can: at91_can: at91_irq_err_line(): make use of can_state_get_by_berr_counter(), Marc Kleine-Budde
  • [PATCH 20/27] can: at91_can: at91_irq_err_frame(): move next to at91_irq_err(), Marc Kleine-Budde
  • [PATCH 24/27] can: at91_can: at91_irq_err_line(): make use of can_change_state() and can_bus_off(), Marc Kleine-Budde
  • [PATCH 26/27] can: at91_can: at91_alloc_can_err_skb() introduce new function, Marc Kleine-Budde
  • [PATCH 23/27] can: at91_can: at91_irq_err_line(): take reg_sr into account for bus off, Marc Kleine-Budde
  • [PATCH 27/27] can: at91_can: switch to rx-offload implementation, Marc Kleine-Budde
    • Re: [PATCH 27/27] can: at91_can: switch to rx-offload implementation, Vincent Mailhol
      • Re: [PATCH 27/27] can: at91_can: switch to rx-offload implementation, Marc Kleine-Budde
      • Re: [PATCH 27/27] can: at91_can: switch to rx-offload implementation, Vincent Mailhol
        • Re: [PATCH 27/27] can: at91_can: switch to rx-offload implementation, Marc Kleine-Budde
      • Re: [PATCH 27/27] can: at91_can: switch to rx-offload implementation, Marc Kleine-Budde
        • Re: [PATCH 27/27] can: at91_can: switch to rx-offload implementation, Vincent Mailhol
          • Re: [PATCH 27/27] can: at91_can: switch to rx-offload implementation, Marc Kleine-Budde
  • [PATCH 21/27] can: at91_can: at91_irq_err(): rename to at91_irq_err_line(), Marc Kleine-Budde
• [PATCH 0/5] can: dev: fix can_restart() and replace BUG_ON() by error handling, Marc Kleine-Budde
  • [PATCH 3/5] can: dev: can_restart(): reverse logic to remove need for goto, Marc Kleine-Budde
  • [PATCH 2/5] can: dev: can_restart(): fix race condition between controller restart and netif_carrier_on(), Marc Kleine-Budde
  • [PATCH 5/5] can: dev: can_put_echo_skb(): don't crash kernel if can_priv::echo_skb is accessed out of bounds, Marc Kleine-Budde
  • [PATCH 4/5] can: dev: can_restart(): update debug and error messages, Marc Kleine-Budde
    • Re: [PATCH 4/5] can: dev: can_restart(): update debug and error messages, Vincent Mailhol
      • Re: [PATCH 4/5] can: dev: can_restart(): update debug and error messages, Marc Kleine-Budde
        • Re: [PATCH 4/5] can: dev: can_restart(): update debug and error messages, Marc Kleine-Budde
          • Re: [PATCH 4/5] can: dev: can_restart(): update debug and error messages, Vincent Mailhol
            • Re: [PATCH 4/5] can: dev: can_restart(): update debug and error messages, Marc Kleine-Budde
  • [PATCH 1/5] can: dev: can_restart(): don't crash kernel if carrier is OK, Marc Kleine-Budde
• [net-next PATCH v2 1/4] netdev: replace simple napi_schedule_prep/__napi_schedule to napi_schedule, Christian Marangi
  • [net-next PATCH v2 4/4] netdev: use napi_schedule bool instead of napi_schedule_prep/__napi_schedule, Christian Marangi
    • Re: [net-next PATCH v2 4/4] netdev: use napi_schedule bool instead of napi_schedule_prep/__napi_schedule, Eric Dumazet
      • Re: [net-next PATCH v2 4/4] netdev: use napi_schedule bool instead of napi_schedule_prep/__napi_schedule, Christian Marangi
        • Re: [net-next PATCH v2 4/4] netdev: use napi_schedule bool instead of napi_schedule_prep/__napi_schedule, Eric Dumazet
          • Re: [net-next PATCH v2 4/4] netdev: use napi_schedule bool instead of napi_schedule_prep/__napi_schedule, Christian Marangi
            • Re: [net-next PATCH v2 4/4] netdev: use napi_schedule bool instead of napi_schedule_prep/__napi_schedule, Eric Dumazet
  • [net-next PATCH v2 2/4] netdev: make napi_schedule return bool on NAPI successful schedule, Christian Marangi
  • [net-next PATCH v2 3/4] netdev: replace napi_reschedule with napi_schedule, Christian Marangi
    • Re: [net-next PATCH v2 3/4] netdev: replace napi_reschedule with napi_schedule, Eric Dumazet
      • Re: [net-next PATCH v2 3/4] netdev: replace napi_reschedule with napi_schedule, Jakub Kicinski
        • Re: [net-next PATCH v2 3/4] netdev: replace napi_reschedule with napi_schedule, Eric Dumazet
          • Re: [net-next PATCH v2 3/4] netdev: replace napi_reschedule with napi_schedule, Christian Marangi
            • Re: [net-next PATCH v2 3/4] netdev: replace napi_reschedule with napi_schedule, Eric Dumazet
  • Re: [net-next PATCH v2 1/4] netdev: replace simple napi_schedule_prep/__napi_schedule to napi_schedule, Eric Dumazet
• [PATCH v3] can: sja1000: Always restart the Tx queue after an overrun, Miquel Raynal
  • Re: [PATCH v3] can: sja1000: Always restart the Tx queue after an overrun, Marc Kleine-Budde
    • Re: [PATCH v3] can: sja1000: Always restart the Tx queue after an overrun, Miquel Raynal
• [net-next PATCH 1/4] netdev: replace simple napi_schedule_prep/__napi_schedule to napi_schedule, Christian Marangi
  • [net-next PATCH 4/4] netdev: use napi_schedule bool instead of napi_schedule_prep/__napi_schedule, Christian Marangi
  • [net-next PATCH 2/4] netdev: make napi_schedule return bool on NAPI successful schedule, Christian Marangi
    • Re: [net-next PATCH 2/4] netdev: make napi_schedule return bool on NAPI successful schedule, Jeff Johnson
    • Re: [net-next PATCH 2/4] netdev: make napi_schedule return bool on NAPI successful schedule, Eric Dumazet
      • Re: [net-next PATCH 2/4] netdev: make napi_schedule return bool on NAPI successful schedule, Christian Marangi
  • [net-next PATCH 3/4] netdev: replace napi_reschedule with napi_schedule, Christian Marangi
    • Re: [net-next PATCH 3/4] netdev: replace napi_reschedule with napi_schedule, Jeff Johnson
    • Re: [net-next PATCH 3/4] netdev: replace napi_reschedule with napi_schedule, Nick Child
    • Re: [net-next PATCH 3/4] netdev: replace napi_reschedule with napi_schedule, Marc Kleine-Budde
      • Re: [net-next PATCH 3/4] netdev: replace napi_reschedule with napi_schedule, Christian Marangi
        • Re: [net-next PATCH 3/4] netdev: replace napi_reschedule with napi_schedule, Marc Kleine-Budde
  • Re: [net-next PATCH 1/4] netdev: replace simple napi_schedule_prep/__napi_schedule to napi_schedule, Jakub Kicinski
• [syzbot] Monthly can report (Sep 2023), syzbot
• Outstanding latency increase in kernel CAN gateway caught by CANlatester daily builds at 2023-10-02, Pavel Pisa
  • Re: Outstanding latency increase in kernel CAN gateway caught by CANlatester daily builds at 2023-10-02, Oliver Hartkopp
    • Re: Outstanding latency increase in kernel CAN gateway caught by CANlatester daily builds at 2023-10-02, Pavel Pisa
• [PATCH v6 00/14] can: m_can: Optimizations for m_can/tcan part 2, Markus Schneider-Pargmann
  • [PATCH v6 01/14] can: m_can: Start/Cancel polling timer together with interrupts, Markus Schneider-Pargmann
    • Re: [PATCH v6 01/14] can: m_can: Start/Cancel polling timer together with interrupts, Simon Horman
  • [PATCH v6 06/14] can: m_can: Add rx coalescing ethtool support, Markus Schneider-Pargmann
    • Re: [PATCH v6 06/14] can: m_can: Add rx coalescing ethtool support, Simon Horman
  • [PATCH v6 08/14] can: m_can: Use u32 for putidx, Markus Schneider-Pargmann
  • [PATCH v6 02/14] can: m_can: Move hrtimer init to m_can_class_register, Markus Schneider-Pargmann
    • Re: [PATCH v6 02/14] can: m_can: Move hrtimer init to m_can_class_register, Simon Horman
  • [PATCH v6 10/14] can: m_can: Use the workqueue as queue, Markus Schneider-Pargmann
  • [PATCH v6 03/14] can: m_can: Write transmit header and data in one transaction, Markus Schneider-Pargmann
  • [PATCH v6 05/14] can: m_can: Implement transmit coalescing, Markus Schneider-Pargmann
    • Re: [PATCH v6 05/14] can: m_can: Implement transmit coalescing, Simon Horman
  • [PATCH v6 11/14] can: m_can: Introduce a tx_fifo_in_flight counter, Markus Schneider-Pargmann
  • [PATCH v6 09/14] can: m_can: Cache tx putidx, Markus Schneider-Pargmann
  • [PATCH v6 04/14] can: m_can: Implement receive coalescing, Markus Schneider-Pargmann
    • Re: [PATCH v6 04/14] can: m_can: Implement receive coalescing, Simon Horman
  • [PATCH v6 07/14] can: m_can: Add tx coalescing ethtool support, Markus Schneider-Pargmann
    • Re: [PATCH v6 07/14] can: m_can: Add tx coalescing ethtool support, Simon Horman
  • [PATCH v6 12/14] can: m_can: Use tx_fifo_in_flight for netif_queue control, Markus Schneider-Pargmann
  • [PATCH v6 14/14] can: m_can: Implement transmit submission coalescing, Markus Schneider-Pargmann
  • [PATCH v6 13/14] can: m_can: Implement BQL, Markus Schneider-Pargmann
  • Re: [PATCH v6 00/14] can: m_can: Optimizations for m_can/tcan part 2, Markus Schneider-Pargmann
  • Re: [PATCH v6 00/14] can: m_can: Optimizations for m_can/tcan part 2, Martin Hundebøll
    • Re: [PATCH v6 00/14] can: m_can: Optimizations for m_can/tcan part 2, Marc Kleine-Budde
      • Re: [PATCH v6 00/14] can: m_can: Optimizations for m_can/tcan part 2, Martin Hundebøll
        • Re: [PATCH v6 00/14] can: m_can: Optimizations for m_can/tcan part 2, Markus Schneider-Pargmann
• [PATCH v2] can: sja1000: Always restart the Tx queue after an overrun, Miquel Raynal
  • Re: [PATCH v2] can: sja1000: Always restart the Tx queue after an overrun, Marc Kleine-Budde
    • Re: [PATCH v2] can: sja1000: Always restart the Tx queue after an overrun, Miquel Raynal
• [PATCH v1] can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER), Oleksij Rempel
  • Re: [PATCH v1] can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER), Oleksij Rempel
  • Re: [PATCH v1] can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER), Marc Kleine-Budde
• IXXAT CAN-IB2XX drivers, Eric Stahl
  • Re: IXXAT CAN-IB2XX drivers, Marc Kleine-Budde
• [PATCH net-next] can: sja1000: Fix comment, Miquel Raynal
  • Re: [PATCH net-next] can: sja1000: Fix comment, Simon Horman
    • Re: [PATCH net-next] can: sja1000: Fix comment, Miquel Raynal
  • Re: [PATCH net-next] can: sja1000: Fix comment, Marc Kleine-Budde
• [PATCH net] can: sja1000: Always restart the Tx queue after an overrun, Miquel Raynal
  • Re: [PATCH net] can: sja1000: Always restart the Tx queue after an overrun, Marc Kleine-Budde
    • Re: [PATCH net] can: sja1000: Always restart the Tx queue after an overrun, Marc Kleine-Budde
      • Re: [PATCH net] can: sja1000: Always restart the Tx queue after an overrun, Miquel Raynal
• [PATCH] can: m_can: don't enable transceiver when probing, Martin Hundebøll
  • <Possible follow-ups>
  • [PATCH] can: m_can: don't enable transceiver when probing, Martin Hundebøll
    • Re: [PATCH] can: m_can: don't enable transceiver when probing, Markus Schneider-Pargmann
• [PATCH v2 1/2] can: m_can: allow keeping the transceiver running in suspend, Martin Hundebøll
  • [PATCH v2 2/2] can: tcan4x5x: support resuming from rx interrupt signal, Martin Hundebøll
    • Re: [PATCH v2 2/2] can: tcan4x5x: support resuming from rx interrupt signal, Markus Schneider-Pargmann
  • Re: [PATCH v2 1/2] can: m_can: allow keeping the transceiver running in suspend, Markus Schneider-Pargmann
• [PATCH] can: tcan4x5x: Fix id2_register for tcan4553, Markus Schneider-Pargmann
  • Re: [PATCH] can: tcan4x5x: Fix id2_register for tcan4553, Simon Horman
  • Re: [PATCH] can: tcan4x5x: Fix id2_register for tcan4553, Marc Kleine-Budde
• [PATCH v1 0/2] can: etas_es58x: clean-up of new GCC W=1 and old checkpath warnings, Vincent Mailhol
  • [PATCH v1 1/2] can: etas_es58x: silence -Wformat-truncation, Vincent Mailhol
  • [PATCH v1 2/2] can: etas_es58x: add missing a blank line after declaration, Vincent Mailhol
  • [PATCH v2 0/2] can: etas_es58x: clean-up of new GCC W=1 and old checkpath warnings, Vincent Mailhol
    • [PATCH v2 1/2] can: etas_es58x: rework the version check logic to silence -Wformat-truncation, Vincent Mailhol
    • [PATCH v2 2/2] can: etas_es58x: add missing a blank line after declaration, Vincent Mailhol
  • [PATCH v3 0/2] can: etas_es58x: clean-up of new GCC W=1 and old checkpath warnings, Vincent Mailhol
    • [PATCH v3 1/2] can: etas_es58x: rework the version check logic to silence -Wformat-truncation, Vincent Mailhol
    • [PATCH v3 2/2] can: etas_es58x: add missing a blank line after declaration, Vincent Mailhol
    • Re: [PATCH v3 0/2] can: etas_es58x: clean-up of new GCC W=1 and old checkpath warnings, Marc Kleine-Budde
• etas_es58x warnings with gcc-13, Marc Kleine-Budde
  • Re: etas_es58x warnings with gcc-13, Vincent MAILHOL
• [PATCH 1/2] can: m_can: allow keeping the transceiver running in suspend, Martin Hundebøll
  • [PATCH 2/2] can: tcan4x5x: support resuming from rx interrupt signal, Martin Hundebøll
    • Re: [PATCH 2/2] can: tcan4x5x: support resuming from rx interrupt signal, Marc Kleine-Budde
  • Re: [PATCH 1/2] can: m_can: allow keeping the transceiver running in suspend, Marc Kleine-Budde
• [PATCH AUTOSEL 6.1 09/26] can: sun4i_can: Add acceptance register quirk, Sasha Levin
• [PATCH AUTOSEL 6.1 10/26] can: sun4i_can: Add support for the Allwinner D1, Sasha Levin
  • Re: [PATCH AUTOSEL 6.1 10/26] can: sun4i_can: Add support for the Allwinner D1, Pavel Machek
• [PATCH AUTOSEL 6.4 12/41] can: sun4i_can: Add support for the Allwinner D1, Sasha Levin
• [PATCH AUTOSEL 6.4 11/41] can: sun4i_can: Add acceptance register quirk, Sasha Levin
• [PATCH AUTOSEL 6.5 14/45] can: sun4i_can: Add support for the Allwinner D1, Sasha Levin
• [PATCH AUTOSEL 6.5 13/45] can: sun4i_can: Add acceptance register quirk, Sasha Levin
• [PATCH] can: sun4i_can: Only show Kconfig if ARCH_SUNXI is set, John Watts
  • Re: [PATCH] can: sun4i_can: Only show Kconfig if ARCH_SUNXI is set, Geert Uytterhoeven
  • Re: [PATCH] can: sun4i_can: Only show Kconfig if ARCH_SUNXI is set, John Watts
  • Re: [PATCH] can: sun4i_can: Only show Kconfig if ARCH_SUNXI is set, Marc Kleine-Budde
• [PATCH] of: overlay: Fix of_overlay_fdt_apply prototype when !CONFIG_OF_OVERLAY, Pavel Pisa
  • Re: [PATCH] of: overlay: Fix of_overlay_fdt_apply prototype when !CONFIG_OF_OVERLAY, Marc Kleine-Budde
  • Re: [PATCH] of: overlay: Fix of_overlay_fdt_apply prototype when !CONFIG_OF_OVERLAY, Rob Herring
• [PATCH v4 0/3] can: xilinx_can: Add ECC feature support, Srinivas Goud
  • [PATCH v4 1/3] dt-bindings: can: xilinx_can: Add ECC property 'xlnx,has-ecc', Srinivas Goud
    • Re: [PATCH v4 1/3] dt-bindings: can: xilinx_can: Add ECC property 'xlnx,has-ecc', Marc Kleine-Budde
  • [PATCH v4 2/3] can: xilinx_can: Add ECC support, Srinivas Goud
    • Re: [PATCH v4 2/3] can: xilinx_can: Add ECC support, Marc Kleine-Budde
  • [PATCH v4 3/3] can: xilinx_can: Add ethtool stats interface for ECC errors, Srinivas Goud
    • Re: [PATCH v4 3/3] can: xilinx_can: Add ethtool stats interface for ECC errors, Marc Kleine-Budde
    • Re: [PATCH v4 3/3] can: xilinx_can: Add ethtool stats interface for ECC errors, Marc Kleine-Budde
• [PATCH] can: etas_es58x: Add check for alloc_can_err_skb, Jiasheng Jiang
  • Re: [PATCH] can: etas_es58x: Add check for alloc_can_err_skb, Vincent MAILHOL
  • Re: [PATCH] can: etas_es58x: Add check for alloc_can_err_skb, Denis Kirjanov
• [PATCH v3 0/3] can: xilinx_can: Add ECC feature support, Srinivas Goud
  • [PATCH v3 2/3] can: xilinx_can: Add ECC support, Srinivas Goud
  • [PATCH v3 1/3] dt-bindings: can: xilinx_can: Add ECC property 'xlnx,has-ecc', Srinivas Goud
    • Re: [PATCH v3 1/3] dt-bindings: can: xilinx_can: Add ECC property 'xlnx,has-ecc', Rob Herring
      • RE: [PATCH v3 1/3] dt-bindings: can: xilinx_can: Add ECC property 'xlnx,has-ecc', Goud, Srinivas
        • Re: [PATCH v3 1/3] dt-bindings: can: xilinx_can: Add ECC property 'xlnx,has-ecc', Krzysztof Kozlowski
          • RE: [PATCH v3 1/3] dt-bindings: can: xilinx_can: Add ECC property 'xlnx,has-ecc', Goud, Srinivas
  • [PATCH v3 3/3] can: xilinx_can: Add ethtool stats interface for ECC errors, Srinivas Goud
• [PATCH] can: raw: Remove NULL check before dev_{put, hold}, Jiapeng Chong
  • Re: [PATCH] can: raw: Remove NULL check before dev_{put, hold}, Oliver Hartkopp
  • Re: [PATCH] can: raw: Remove NULL check before dev_{put, hold}, Marc Kleine-Budde
• [PATCH v2 0/3] can: xilinx_can: Add ECC feature support, Srinivas Goud
  • [PATCH v2 1/3] dt-bindings: can: xilinx_can: Add ECC property ‘xlnx,has-ecc’, Srinivas Goud
    • Re: [PATCH v2 1/3] dt-bindings: can: xilinx_can: Add ECC property ‘xlnx,has-ecc’, Krzysztof Kozlowski
  • [PATCH v2 2/3] can: xilinx_can: Add ECC support, Srinivas Goud
  • [PATCH v2 3/3] can: xilinx_can: Add ethtool stats interface for ECC errors, Srinivas Goud
• [NET 0/2] CAN fixes for 6.5-rc7, Oliver Hartkopp
  • [NET 1/2] can: isotp: fix support for transmission of SF without flow control, Oliver Hartkopp
  • [NET 2/2] can: raw: add missing refcount for memory leak fix, Oliver Hartkopp
    • Re: [NET 2/2] can: raw: add missing refcount for memory leak fix, Simon Horman
      • Re: [NET 2/2] can: raw: add missing refcount for memory leak fix, Oliver Hartkopp
        • Re: [NET 2/2] can: raw: add missing refcount for memory leak fix, Simon Horman
  • Re: [NET 0/2] CAN fixes for 6.5-rc7, patchwork-bot+netdevbpf
• [PATCH net] net: validate veth and vxcan peer ifindexes, Jakub Kicinski
  • Re: [PATCH net] net: validate veth and vxcan peer ifindexes, Eric Dumazet
  • Re: [PATCH net] net: validate veth and vxcan peer ifindexes, patchwork-bot+netdevbpf
  • Re: [PATCH net] net: validate veth and vxcan peer ifindexes, Ido Schimmel
    • Re: [PATCH net] net: validate veth and vxcan peer ifindexes, Jakub Kicinski
      • Re: [PATCH net] net: validate veth and vxcan peer ifindexes, Ido Schimmel
• [PATCH] can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior, Lukas Magel
  • Re: [PATCH] can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior, Oliver Hartkopp
  • [PATCH v2] can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior, Lukas Magel
    • Re: [PATCH v2] can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior, Oliver Hartkopp
      • Re: [PATCH v2] can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior, Oliver Hartkopp
    • Re: [PATCH v2] can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior, Marc Kleine-Budde
• [PATCH 0/2] can: per-device hardware filter support, Martin Hundebøll
  • [PATCH 1/2] can: netlink: support setting hardware filters, Martin Hundebøll
    • Re: [PATCH 1/2] can: netlink: support setting hardware filters, Jakub Kicinski
      • Re: [PATCH 1/2] can: netlink: support setting hardware filters, Vincent Mailhol
        • Re: [PATCH 1/2] can: netlink: support setting hardware filters, Vincent Mailhol
          • Re: [PATCH 1/2] can: netlink: support setting hardware filters, Oliver Hartkopp
            • Re: [PATCH 1/2] can: netlink: support setting hardware filters, Vincent Mailhol
  • [PATCH 2/2] can: m_can: support setting hw filters, Martin Hundebøll
  • Re: [PATCH 0/2] can: per-device hardware filter support, Oliver Hartkopp
  • [PATCH] can: ip: support hw-filter setting, Martin Hundebøll
• [PATCH] can: raw: add missing refcount for memory leak fix, Oliver Hartkopp
• possible deadlock in raw_setsockopt, Yikebaer Aizezi
  • Re: possible deadlock in raw_setsockopt, Oliver Hartkopp
    • Re: possible deadlock in raw_setsockopt, Yikebaer Aizezi
• [PATCH 13/36] tty: can327: unify error paths in can327_ldisc_rx(), Jiri Slaby (SUSE)
  • Re: [PATCH 13/36] tty: can327: unify error paths in can327_ldisc_rx(), Max Staudt
• [PATCH 14/36] tty: can327, move overflow test inside can327_ldisc_rx()'s loop, Jiri Slaby (SUSE)
  • Re: [PATCH 14/36] tty: can327, move overflow test inside can327_ldisc_rx()'s loop, Max Staudt
• [PATCH net-next 0/1] pull-request: can-next 2023-08-07, Marc Kleine-Budde
  • [PATCH net-next] Revert "riscv: dts: allwinner: d1: Add CAN controller nodes", Marc Kleine-Budde
    • Re: [PATCH net-next] Revert "riscv: dts: allwinner: d1: Add CAN controller nodes", Jernej Škrabec
    • Re: [PATCH net-next] Revert "riscv: dts: allwinner: d1: Add CAN controller nodes", patchwork-bot+netdevbpf
• [PATCH] Revert "riscv: dts: allwinner: d1: Add CAN controller nodes", Marc Kleine-Budde
  • Re: [PATCH] Revert "riscv: dts: allwinner: d1: Add CAN controller nodes", Jernej Škrabec
• [RFC PATCH] can: raw: add missing refcount for memory leak fix, Oliver Hartkopp
  • Re: [RFC PATCH] can: raw: add missing refcount for memory leak fix, Eric Dumazet
    • Re: [RFC PATCH] can: raw: add missing refcount for memory leak fix, Oliver Hartkopp
      • Re: [RFC PATCH] can: raw: add missing refcount for memory leak fix, Eric Dumazet
        • Re: [RFC PATCH] can: raw: add missing refcount for memory leak fix, Oliver Hartkopp
• [PATCH net-next 0/9] pull-request: can-next 2023-08-03, Marc Kleine-Budde
  • [PATCH net-next 2/9] dt-bindings: can: tcan4x5x: Add tcan4552 and tcan4553 variants, Marc Kleine-Budde
  • [PATCH net-next 3/9] can: tcan4x5x: Remove reserved register 0x814 from writable table, Marc Kleine-Budde
  • [PATCH net-next 1/9] can: flexcan: fix the return value handle for platform_get_irq(), Marc Kleine-Budde
    • Re: [PATCH net-next 1/9] can: flexcan: fix the return value handle for platform_get_irq(), patchwork-bot+netdevbpf
  • [PATCH net-next 4/9] can: tcan4x5x: Check size of mram configuration, Marc Kleine-Budde
  • [PATCH net-next 5/9] can: tcan4x5x: Rename ID registers to match datasheet, Marc Kleine-Budde
  • [PATCH net-next 7/9] can: tcan4x5x: Add error messages in probe, Marc Kleine-Budde
  • [PATCH net-next 8/9] can: c_can: Do not check for 0 return after calling platform_get_irq(), Marc Kleine-Budde
  • [PATCH net-next 9/9] can: esd_usb: Add support for esd CAN-USB/3, Marc Kleine-Budde
  • [PATCH net-next 6/9] can: tcan4x5x: Add support for tcan4552/4553, Marc Kleine-Budde
• [PATCH net-next] can: c_can: Do not check for 0 return after calling platform_get_irq(), Ruan Jinjie
  • Re: [PATCH net-next] can: c_can: Do not check for 0 return after calling platform_get_irq(), Marc Kleine-Budde
• [PATCH 2/2] net: nfc: remove casts from tty->disc_data, Jiri Slaby (SUSE)
  • Re: [PATCH 2/2] net: nfc: remove casts from tty->disc_data, Simon Horman
  • Re: [PATCH 2/2] net: nfc: remove casts from tty->disc_data, Max Staudt
  • Re: [PATCH 2/2] net: nfc: remove casts from tty->disc_data, Jakub Kicinski
    • Re: [PATCH 2/2] net: nfc: remove casts from tty->disc_data, Jiri Slaby
      • Re: [PATCH 2/2] net: nfc: remove casts from tty->disc_data, Greg KH
• [PATCH 1/2] can: can327: remove casts from tty->disc_data, Jiri Slaby (SUSE)
  • Re: [PATCH 1/2] can: can327: remove casts from tty->disc_data, Simon Horman
  • Re: [PATCH 1/2] can: can327: remove casts from tty->disc_data, Max Staudt
• [PATCH 05/10] can: slcan: remove casts from tty->disc_data, Jiri Slaby (SUSE)
  • Re: [PATCH 05/10] can: slcan: remove casts from tty->disc_data, Marc Kleine-Budde
• [PATCH -next] can: flexcan: fix the return value handle for platform_get_irq(), Ruan Jinjie
  • Re: [PATCH -next] can: flexcan: fix the return value handle for platform_get_irq(), Marc Kleine-Budde
• [PATCH 0/1] can: esd_usb: Add support for esd CAN-USB/3, Frank Jungclaus
  • [PATCH 1/1] can: esd_usb: Add support for esd CAN-USB/3, Frank Jungclaus
    • Re: [PATCH 1/1] can: esd_usb: Add support for esd CAN-USB/3, Simon Horman
  • Re: [PATCH 0/1] can: esd_usb: Add support for esd CAN-USB/3, Marc Kleine-Budde
• [PATCH v4 0/6] can: tcan4x5x: Introduce tcan4552/4553, Markus Schneider-Pargmann
  • [PATCH v4 5/6] can: tcan4x5x: Add support for tcan4552/4553, Markus Schneider-Pargmann
  • [PATCH v4 4/6] can: tcan4x5x: Rename ID registers to match datasheet, Markus Schneider-Pargmann
  • [PATCH v4 1/6] dt-bindings: can: tcan4x5x: Add tcan4552 and tcan4553 variants, Markus Schneider-Pargmann
    • Re: [PATCH v4 1/6] dt-bindings: can: tcan4x5x: Add tcan4552 and tcan4553 variants, Rob Herring
  • [PATCH v4 3/6] can: tcan4x5x: Check size of mram configuration, Markus Schneider-Pargmann
  • [PATCH v4 2/6] can: tcan4x5x: Remove reserved register 0x814 from writable table, Markus Schneider-Pargmann
  • [PATCH v4 6/6] can: tcan4x5x: Add error messages in probe, Markus Schneider-Pargmann
  • Re: [PATCH v4 0/6] can: tcan4x5x: Introduce tcan4552/4553, Marc Kleine-Budde
    • Re: [PATCH v4 0/6] can: tcan4x5x: Introduce tcan4552/4553, Markus Schneider-Pargmann
• [PATCH net-next 0/21] pull-request: can-next 2023-07-28, Marc Kleine-Budde
  • [PATCH net-next 03/21] can: sun4i_can: Add acceptance register quirk, Marc Kleine-Budde
  • [PATCH net-next 18/21] can: gs_usb: gs_usb_disconnect(): remove not needed usb_kill_anchored_urbs(), Marc Kleine-Budde
  • [PATCH net-next 20/21] can: rx-offload: add can_rx_offload_get_echo_skb_queue_tail(), Marc Kleine-Budde
  • [PATCH net-next 04/21] MAINTAINERS: Add myself as maintainer of the ems_pci.c driver, Marc Kleine-Budde
  • [PATCH net-next 08/21] can: gs_usb: remove leading space from goto labels, Marc Kleine-Budde
  • [PATCH net-next 15/21] can: gs_usb: gs_can_start_xmit(), gs_can_open(): clean up printouts in error path, Marc Kleine-Budde
  • [PATCH net-next 16/21] can: gs_usb: gs_can_close(): don't complain about failed device reset during ndo_stop, Marc Kleine-Budde
  • [PATCH net-next 17/21] can: gs_usb: gs_destroy_candev(): remove not needed usb_kill_anchored_urbs(), Marc Kleine-Budde
  • [PATCH net-next 09/21] can: gs_usb: gs_usb_probe(): align block comment, Marc Kleine-Budde
  • [PATCH net-next 10/21] can: gs_usb: gs_usb_set_timestamp(): remove return statements form void function, Marc Kleine-Budde
  • [PATCH net-next 21/21] can: gs_usb: convert to NAPI/rx-offload to avoid OoO reception, Marc Kleine-Budde
  • [PATCH net-next 12/21] can: gs_usb: gs_usb_receive_bulk_callback(): make use of netdev, Marc Kleine-Budde
  • [PATCH net-next 11/21] can: gs_usb: uniformly use "parent" as variable name for struct gs_usb, Marc Kleine-Budde
  • [PATCH net-next 14/21] can: gs_usb: gs_usb_receive_bulk_callback(): count RX overflow errors also in case of OOM, Marc Kleine-Budde
  • [PATCH net-next 13/21] can: gs_usb: gs_usb_receive_bulk_callback(): make use of stats, Marc Kleine-Budde
  • [PATCH net-next 07/21] can: Explicitly include correct DT includes, part 2, Marc Kleine-Budde
  • [PATCH net-next 02/21] riscv: dts: allwinner: d1: Add CAN controller nodes, Marc Kleine-Budde
  • [PATCH net-next 01/21] dt-bindings: net: can: Add support for Allwinner D1 CAN controller, Marc Kleine-Budde
    • Re: [PATCH net-next 01/21] dt-bindings: net: can: Add support for Allwinner D1 CAN controller, patchwork-bot+netdevbpf
  • [PATCH net-next 05/21] can: sun4i_can: Add support for the Allwinner D1, Marc Kleine-Budde
  • [PATCH net-next 06/21] can: peak_usb: remove unused/legacy peak_usb_netif_rx() function, Marc Kleine-Budde
  • [PATCH net-next 19/21] can: rx-offload: rename rx_offload_get_echo_skb() -> can_rx_offload_get_echo_skb_queue_timestamp(), Marc Kleine-Budde
• [PATCH v3 1/2] arm64: dts: imx93: add the Flex-CAN stop mode by GPR, haibo . chen
  • [PATCH v3 2/2] can: flexcan: remove the auto stop mode for IMX93, haibo . chen
  • Re: [PATCH v3 1/2] arm64: dts: imx93: add the Flex-CAN stop mode by GPR, Marc Kleine-Budde
• [PATCH v2 1/3] arm64: dts: imx93: add the Flex-CAN stop mode by GPR, haibo . chen
  • [PATCH v2 2/3] can: flexcan: remove the auto stop mode for IMX93, haibo . chen
  • [PATCH v2 3/3] can: flexcan: lack of stop mode dts properity should not block driver probe, haibo . chen
    • Re: [PATCH v2 3/3] can: flexcan: lack of stop mode dts properity should not block driver probe, Marc Kleine-Budde
      • RE: [PATCH v2 3/3] can: flexcan: lack of stop mode dts properity should not block driver probe, Bough Chen
  • Re: [PATCH v2 1/3] arm64: dts: imx93: add the Flex-CAN stop mode by GPR, Marc Kleine-Budde
    • RE: [PATCH v2 1/3] arm64: dts: imx93: add the Flex-CAN stop mode by GPR, Bough Chen
      • Re: RE: [PATCH v2 1/3] arm64: dts: imx93: add the Flex-CAN stop mode by GPR, Marc Kleine-Budde
• [PATCH 1/2] arm64: dts: imx93: add the Flex-CAN stop mode by GPR, haibo . chen
  • [PATCH 2/2] can: flexcan: remove the auto stop mode for IMX93, haibo . chen
    • Re: [PATCH 2/2] can: flexcan: remove the auto stop mode for IMX93, Marc Kleine-Budde
      • RE: [PATCH 2/2] can: flexcan: remove the auto stop mode for IMX93, Bough Chen
• [PATCH v2] can: Explicitly include correct DT includes, part 2, Rob Herring
  • Re: [PATCH v2] can: Explicitly include correct DT includes, part 2, Marc Kleine-Budde
• [PATCH net 0/2] pull-request: can 2023-07-24, Marc Kleine-Budde
  • [PATCH net 2/2] can: raw: fix lockdep issue in raw_release(), Marc Kleine-Budde
  • [PATCH net 1/2] can: gs_usb: gs_can_close(): add missing set of CAN state to CAN_STATE_STOPPED, Marc Kleine-Budde
    • Re: [PATCH net 1/2] can: gs_usb: gs_can_close(): add missing set of CAN state to CAN_STATE_STOPPED, patchwork-bot+netdevbpf
• [PATCH v3 0/4] add support for ASIX AX99100, Jiaqing Zhao
  • [PATCH v3 3/4] serial: 8250_pci: add support for ASIX AX99100, Jiaqing Zhao
  • [PATCH v3 1/4] can: ems_pci: remove PCI_SUBVENDOR_ID_ASIX definition, Jiaqing Zhao
  • [PATCH v3 2/4] can: ems_pci: move ASIX AX99100 ids to pci_ids.h, Jiaqing Zhao
  • [PATCH v3 4/4] parport_pc: add support for ASIX AX99100, Jiaqing Zhao
    • Re: [PATCH v3 4/4] parport_pc: add support for ASIX AX99100, Sudip Mukherjee
• [PATCH v2 0/4] Add support for Allwinner D1 CAN controllers, John Watts
  • [PATCH v2 1/4] dt-bindings: net: can: Add support for Allwinner D1 CAN controller, John Watts
    • Re: [PATCH v2 1/4] dt-bindings: net: can: Add support for Allwinner D1 CAN controller, Krzysztof Kozlowski
  • [PATCH v2 2/4] riscv: dts: allwinner: d1: Add CAN controller nodes, John Watts
    • Re: [PATCH v2 2/4] riscv: dts: allwinner: d1: Add CAN controller nodes, John Watts
      • Re: [PATCH v2 2/4] riscv: dts: allwinner: d1: Add CAN controller nodes, Jernej Škrabec
        • Re: [PATCH v2 2/4] riscv: dts: allwinner: d1: Add CAN controller nodes, John Watts
    • Re: [PATCH v2 2/4] riscv: dts: allwinner: d1: Add CAN controller nodes, Maksim Kiselev
      • Re: [PATCH v2 2/4] riscv: dts: allwinner: d1: Add CAN controller nodes, John Watts
        • Re: [PATCH v2 2/4] riscv: dts: allwinner: d1: Add CAN controller nodes, Jernej Škrabec
          • Re: [PATCH v2 2/4] riscv: dts: allwinner: d1: Add CAN controller nodes, John Watts
            • Re: [PATCH v2 2/4] riscv: dts: allwinner: d1: Add CAN controller nodes, Jernej Škrabec
              • Re: [PATCH v2 2/4] riscv: dts: allwinner: d1: Add CAN controller nodes, Marc Kleine-Budde
                • Re: [PATCH v2 2/4] riscv: dts: allwinner: d1: Add CAN controller nodes, Marc Kleine-Budde
  • [PATCH v2 3/4] can: sun4i_can: Add acceptance register quirk, John Watts
  • [PATCH v2 4/4] can: sun4i_can: Add support for the Allwinner D1, John Watts
    • Re: [PATCH v2 4/4] can: sun4i_can: Add support for the Allwinner D1, Geert Uytterhoeven
      • Re: [PATCH v2 4/4] can: sun4i_can: Add support for the Allwinner D1, John Watts
  • Re: [PATCH v2 0/4] Add support for Allwinner D1 CAN controllers, Marc Kleine-Budde
  • Re: [PATCH v2 0/4] Add support for Allwinner D1 CAN controllers, patchwork-bot+linux-riscv
• [PATCH v1] can: peak_usb: remove unused/legacy peak_usb_netif_rx() function, Peter Seiderer
  • Re: [PATCH v1] can: peak_usb: remove unused/legacy peak_usb_netif_rx() function, Marc Kleine-Budde
• [PATCH v3 0/6] can: tcan4x5x: Introduce tcan4552/4553, Markus Schneider-Pargmann
  • [PATCH v3 1/6] dt-bindings: can: tcan4x5x: Add tcan4552 and tcan4553 variants, Markus Schneider-Pargmann
  • [PATCH v3 2/6] can: tcan4x5x: Remove reserved register 0x814 from writable table, Markus Schneider-Pargmann
  • [PATCH v3 3/6] can: tcan4x5x: Check size of mram configuration, Markus Schneider-Pargmann
  • [PATCH v3 4/6] can: tcan4x5x: Rename ID registers to match datasheet, Markus Schneider-Pargmann
  • [PATCH v3 5/6] can: tcan4x5x: Add support for tcan4552/4553, Markus Schneider-Pargmann
    • Re: [PATCH v3 5/6] can: tcan4x5x: Add support for tcan4552/4553, Sean Anderson
      • Re: [PATCH v3 5/6] can: tcan4x5x: Add support for tcan4552/4553, Markus Schneider-Pargmann
  • [PATCH v3 6/6] can: tcan4x5x: Add error messages in probe, Markus Schneider-Pargmann
    • Re: [PATCH v3 6/6] can: tcan4x5x: Add error messages in probe, Marc Kleine-Budde
      • Re: [PATCH v3 6/6] can: tcan4x5x: Add error messages in probe, Markus Schneider-Pargmann
• [PATCH] MAINTAINERS: Add myself as maintainer of the ems_pci.c driver, Gerhard Uttenthaler
  • Re: [PATCH] MAINTAINERS: Add myself as maintainer of the ems_pci.c driver, Marc Kleine-Budde
• [PATCH net] can: raw: fix lockdep issue in raw_release(), Eric Dumazet
  • Re: [PATCH net] can: raw: fix lockdep issue in raw_release(), Marc Kleine-Budde
  • Re: [PATCH net] can: raw: fix lockdep issue in raw_release(), Oliver Hartkopp
    • Re: [PATCH net] can: raw: fix lockdep issue in raw_release(), Marc Kleine-Budde
• [PATCH v2 0/2] can: ems_pci: refine PCI IDs for ASIX AX99100, Jiaqing Zhao
  • [PATCH v2 1/2] can: ems_pci: remove PCI_SUBVENDOR_ID_ASIX definition, Jiaqing Zhao
  • [PATCH v2 2/2] can: ems_pci: move ASIX AX99100 ids to pci_ids.h, Jiaqing Zhao
    • Re: [PATCH v2 2/2] can: ems_pci: move ASIX AX99100 ids to pci_ids.h, Marc Kleine-Budde
      • Re: [PATCH v2 2/2] can: ems_pci: move ASIX AX99100 ids to pci_ids.h, Jiaqing Zhao
        • Re: [PATCH v2 2/2] can: ems_pci: move ASIX AX99100 ids to pci_ids.h, Greg Kroah-Hartman
          • Re: [PATCH v2 2/2] can: ems_pci: move ASIX AX99100 ids to pci_ids.h, Marc Kleine-Budde
      • Re: [PATCH v2 2/2] can: ems_pci: move ASIX AX99100 ids to pci_ids.h, Jiaqing Zhao
        • Re: [PATCH v2 2/2] can: ems_pci: move ASIX AX99100 ids to pci_ids.h, Marc Kleine-Budde
• [PATCH net-next 0/8] pull-request: can-next 2023-07-19, Marc Kleine-Budde
  • [PATCH net-next 8/8] can: ucan: Remove repeated word, Marc Kleine-Budde
  • [PATCH net-next 3/8] dt-bindings: can: xilinx_can: Add reset description, Marc Kleine-Budde
  • [PATCH net-next 6/8] can: kvaser_pciefd: Move hardware specific constants and functions into a driver_data struct, Marc Kleine-Budde
  • [PATCH net-next 4/8] can: xilinx_can: Add support for controller reset, Marc Kleine-Budde
  • [PATCH net-next 1/8] dt-bindings: net: can: Remove interrupt properties for MCAN, Marc Kleine-Budde
    • Re: [PATCH net-next 1/8] dt-bindings: net: can: Remove interrupt properties for MCAN, patchwork-bot+netdevbpf
  • [PATCH net-next 2/8] can: m_can: Add hrtimer to generate software interrupt, Marc Kleine-Budde
  • [PATCH net-next 5/8] can: Explicitly include correct DT includes, Marc Kleine-Budde
  • [PATCH net-next 7/8] can: kvaser_pciefd: Add support for new Kvaser pciefd devices, Marc Kleine-Budde
• [PATCH 0/4] add support for ASIX AX99100, Jiaqing Zhao
  • [PATCH 2/4] can: ems_pci: move ASIX AX99100 ids to pci_ids.h, Jiaqing Zhao
    • Re: [PATCH 2/4] can: ems_pci: move ASIX AX99100 ids to pci_ids.h, Bjorn Helgaas
  • [PATCH 1/4] can: ems_pci: remove PCI_SUBVENDOR_ID_ASIX definition, Jiaqing Zhao
  • [PATCH 4/4] parport_pc: add support for ASIX AX99100, Jiaqing Zhao
  • [PATCH 3/4] serial: 8250_pci: add support for ASIX AX99100, Jiaqing Zhao
    • Re: [PATCH 3/4] serial: 8250_pci: add support for ASIX AX99100, Bjorn Helgaas
  • Re: [PATCH 0/4] add support for ASIX AX99100, Marc Kleine-Budde
• [PATCH v2] can: ucan: Remove repeated word, Marc Kleine-Budde
• [PATCH v2 0/3] can: gs_usb: convert to NAPI, Marc Kleine-Budde
  • [PATCH v2 2/3] can: rx-offload: add can_rx_offload_get_echo_skb_queue_tail(), Marc Kleine-Budde
  • [PATCH v2 1/3] can: rx-offload: rename rx_offload_get_echo_skb() -> can_rx_offload_get_echo_skb_queue_timestamp(), Marc Kleine-Budde
  • [PATCH v2 3/3] can: gs_usb: convert to NAPI/rx-offload to avoid OoO reception, Marc Kleine-Budde
• [PATCH 00/11] can: gs_usb-cleanups: various clenaups, Marc Kleine-Budde
  • [PATCH 06/11] can: gs_usb: gs_usb_receive_bulk_callback(): make use of stats, Marc Kleine-Budde
  • [PATCH 04/11] can: gs_usb: uniformly use "parent" as variable name for struct gs_usb, Marc Kleine-Budde
  • [PATCH 08/11] can: gs_usb: gs_can_start_xmit(), gs_can_open(): clean up printouts in error path, Marc Kleine-Budde
  • [PATCH 10/11] can: gs_usb: gs_destroy_candev(): remove not needed usb_kill_anchored_urbs(), Marc Kleine-Budde
  • [PATCH 07/11] can: gs_usb: gs_usb_receive_bulk_callback(): count RX overflow errors also in case of OOM, Marc Kleine-Budde
  • [PATCH 11/11] can: gs_usb: gs_usb_disconnect(): remove not needed usb_kill_anchored_urbs(), Marc Kleine-Budde
  • [PATCH 02/11] can: gs_usb: gs_usb_probe(): align block comment, Marc Kleine-Budde
  • [PATCH 09/11] cam: gs_usb: gs_can_close(): don't complain about failed device reset during ndo_stop, Marc Kleine-Budde
  • [PATCH 03/11] can: gs_usb: gs_usb_set_timestamp(): remove return statements form void function, Marc Kleine-Budde
  • [PATCH 01/11] can: gs_usb: remove leading space from goto labels, Marc Kleine-Budde
  • [PATCH 05/11] can: gs_usb: gs_usb_receive_bulk_callback(): make use of netdev, Marc Kleine-Budde
• [PATCH] can: gs_usb: gs_can_close(): add missing set of CAN state to CAN_STATE_STOPPED, Marc Kleine-Budde
• [PATCH v5 00/12] can: m_can: Optimizations for m_can/tcan part 2, Markus Schneider-Pargmann
  • [PATCH v5 05/12] can: m_can: Add tx coalescing ethtool support, Markus Schneider-Pargmann
  • [PATCH v5 10/12] can: m_can: Use tx_fifo_in_flight for netif_queue control, Markus Schneider-Pargmann
    • Re: [PATCH v5 10/12] can: m_can: Use tx_fifo_in_flight for netif_queue control, Simon Horman
  • [PATCH v5 08/12] can: m_can: Use the workqueue as queue, Markus Schneider-Pargmann
  • [PATCH v5 06/12] can: m_can: Use u32 for putidx, Markus Schneider-Pargmann
    • Re: [PATCH v5 06/12] can: m_can: Use u32 for putidx, Simon Horman
  • [PATCH v5 09/12] can: m_can: Introduce a tx_fifo_in_flight counter, Markus Schneider-Pargmann
  • [PATCH v5 03/12] can: m_can: Implement transmit coalescing, Markus Schneider-Pargmann
  • [PATCH v5 01/12] can: m_can: Write transmit header and data in one transaction, Markus Schneider-Pargmann
    • Re: [PATCH v5 01/12] can: m_can: Write transmit header and data in one transaction, Simon Horman
  • [PATCH v5 02/12] can: m_can: Implement receive coalescing, Markus Schneider-Pargmann
  • [PATCH v5 07/12] can: m_can: Cache tx putidx, Markus Schneider-Pargmann
  • [PATCH v5 11/12] can: m_can: Implement BQL, Markus Schneider-Pargmann
  • [PATCH v5 04/12] can: m_can: Add rx coalescing ethtool support, Markus Schneider-Pargmann
  • [PATCH v5 12/12] can: m_can: Implement transmit submission coalescing, Markus Schneider-Pargmann
    • Re: [PATCH v5 12/12] can: m_can: Implement transmit submission coalescing, Simon Horman
      • Re: [PATCH v5 12/12] can: m_can: Implement transmit submission coalescing, Markus Schneider-Pargmann
  • Re: [PATCH v5 00/12] can: m_can: Optimizations for m_can/tcan part 2, Markus Schneider-Pargmann
  • Re: [PATCH v5 00/12] can: m_can: Optimizations for m_can/tcan part 2, Martin Hundebøll
    • Re: [PATCH v5 00/12] can: m_can: Optimizations for m_can/tcan part 2, Markus Schneider-Pargmann
• [PATCH net-next 0/8] pull-request: can-next 2023-07-17, Marc Kleine-Budde
  • [PATCH net-next 2/8] can: m_can: Add hrtimer to generate software interrupt, Marc Kleine-Budde
  • [PATCH net-next 3/8] can: ems_pci: Remove unnecessary (void *) conversions, Marc Kleine-Budde
  • [PATCH net-next 6/8] can: xilinx_can: Add support for controller reset, Marc Kleine-Budde
  • [PATCH net-next 7/8] can: kvaser_pciefd: Move hardware specific constants and functions into a driver_data struct, Marc Kleine-Budde
    • Re: [PATCH net-next 7/8] can: kvaser_pciefd: Move hardware specific constants and functions into a driver_data struct, Jakub Kicinski
      • Re: [PATCH net-next 7/8] can: kvaser_pciefd: Move hardware specific constants and functions into a driver_data struct, Marc Kleine-Budde
        • Re: [PATCH net-next 7/8] can: kvaser_pciefd: Move hardware specific constants and functions into a driver_data struct, Marc Kleine-Budde
  • [PATCH net-next 5/8] dt-bindings: can: xilinx_can: Add reset description, Marc Kleine-Budde
  • [PATCH net-next 8/8] can: kvaser_pciefd: Add support for new Kvaser pciefd devices, Marc Kleine-Budde
  • [PATCH net-next 1/8] dt-bindings: net: can: Remove interrupt properties for MCAN, Marc Kleine-Budde
    • Re: [PATCH net-next 1/8] dt-bindings: net: can: Remove interrupt properties for MCAN, patchwork-bot+netdevbpf
  • [PATCH net-next 4/8] can: Explicitly include correct DT includes, Marc Kleine-Budde
• [PATCH net 0/5] pull-request: can 2023-07-17, Marc Kleine-Budde
  • [PATCH net 2/5] can: bcm: Fix UAF in bcm_proc_show(), Marc Kleine-Budde
  • [PATCH net 3/5] can: gs_usb: gs_can_open(): improve error handling, Marc Kleine-Budde
  • [PATCH net 1/5] can: raw: fix receiver memory leak, Marc Kleine-Budde
    • Re: [PATCH net 1/5] can: raw: fix receiver memory leak, patchwork-bot+netdevbpf
  • [PATCH net 5/5] can: mcp251xfd: __mcp251xfd_chip_set_mode(): increase poll timeout, Marc Kleine-Budde
  • [PATCH net 4/5] can: gs_usb: fix time stamp counter initialization, Marc Kleine-Budde
• [PATCH v5] can: mcp251xfd: __mcp251xfd_chip_set_mode(): increase poll timeout, Marc Kleine-Budde
• [PATCH v4] can: mcp251xfd: __mcp251xfd_chip_set_mode(): increase poll timeout, Marc Kleine-Budde
• [PATCH v3] can: mcp251xfd: __mcp251xfd_chip_set_mode(): increase poll timeout, Marc Kleine-Budde
  • Re: [PATCH v3] can: mcp251xfd: __mcp251xfd_chip_set_mode(): increase poll timeout, Marc Kleine-Budde
• [PATCH net-next v4 8/9] can: ems_pci: Remove unnecessary (void*) conversions, Wu Yunchuan
  • Re: [PATCH net-next v4 8/9] can: ems_pci: Remove unnecessary (void*) conversions, Marc Kleine-Budde
• [PATCH net-next v3 8/9] can: ems_pci: Remove unnecessary (void*) conversions, Wu Yunchuan
  • Re: [PATCH net-next v3 8/9] can: ems_pci: Remove unnecessary (void*) conversions, Marc Kleine-Budde
    • Re: [PATCH net-next v3 8/9] can: ems_pci: Remove unnecessary (void*) conversions, yunchuan
    • Re: [PATCH net-next v3 8/9] can: ems_pci: Remove unnecessary (void*) conversions, Marc Kleine-Budde
      • Re: [PATCH net-next v3 8/9] can: ems_pci: Remove unnecessary (void*) conversions, yunchuan
        • Re: [PATCH net-next v3 8/9] can: ems_pci: Remove unnecessary (void*) conversions, Marc Kleine-Budde
          • Re: [PATCH net-next v3 8/9] can: ems_pci: Remove unnecessary (void*) conversions, yunchuan
• [PATCH net-next v3 0/9] Remove unnecessary (void*) conversions, Wu Yunchuan
  • Re: [PATCH net-next v3 0/9] Remove unnecessary (void*) conversions, patchwork-bot+netdevbpf
• [PATCH 0/2] can: gs_usb: fix time stamp counter initialization, Marc Kleine-Budde