From: Martin Jerabek <martin.jerabek01@xxxxxxxxx> This driver adds support for the CTU CAN FD open-source IP core. More documentation and core sources at project page (https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core). The core integration to Xilinx Zynq system as platform driver is available (https://gitlab.fel.cvut.cz/canbus/zynq/zynq-can-sja1000-top). Implementation on Intel FPGA based PCI Express board is available from project (https://gitlab.fel.cvut.cz/canbus/pcie-ctucanfd). More about CAN bus related projects used and developed at CTU FEE at https://canbus.pages.fel.cvut.cz/ . Link: https://lore.kernel.org/all/1906e4941560ae2ce4b8d181131fd4963aa31611.1647904780.git.pisa@xxxxxxxxxxxxxxxx Signed-off-by: Martin Jerabek <martin.jerabek01@xxxxxxxxx> Signed-off-by: Ondrej Ille <ondrej.ille@xxxxxxxxx> Signed-off-by: Pavel Pisa <pisa@xxxxxxxxxxxxxxxx> Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> --- drivers/net/can/Kconfig | 1 + drivers/net/can/Makefile | 1 + drivers/net/can/ctucanfd/Kconfig | 12 + drivers/net/can/ctucanfd/Makefile | 7 + drivers/net/can/ctucanfd/ctucanfd.h | 82 ++ drivers/net/can/ctucanfd/ctucanfd_base.c | 1490 ++++++++++++++++++++ drivers/net/can/ctucanfd/ctucanfd_kframe.h | 77 + drivers/net/can/ctucanfd/ctucanfd_kregs.h | 325 +++++ 8 files changed, 1995 insertions(+) create mode 100644 drivers/net/can/ctucanfd/Kconfig create mode 100644 drivers/net/can/ctucanfd/Makefile create mode 100644 drivers/net/can/ctucanfd/ctucanfd.h create mode 100644 drivers/net/can/ctucanfd/ctucanfd_base.c create mode 100644 drivers/net/can/ctucanfd/ctucanfd_kframe.h create mode 100644 drivers/net/can/ctucanfd/ctucanfd_kregs.h diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index fff259247d52..ac760fd39282 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -170,6 +170,7 @@ config PCH_CAN source "drivers/net/can/c_can/Kconfig" source "drivers/net/can/cc770/Kconfig" +source "drivers/net/can/ctucanfd/Kconfig" source "drivers/net/can/ifi_canfd/Kconfig" source "drivers/net/can/m_can/Kconfig" source "drivers/net/can/mscan/Kconfig" diff --git a/drivers/net/can/Makefile b/drivers/net/can/Makefile index 1e660afcb61b..0af85983634c 100644 --- a/drivers/net/can/Makefile +++ b/drivers/net/can/Makefile @@ -16,6 +16,7 @@ obj-y += softing/ obj-$(CONFIG_CAN_AT91) += at91_can.o obj-$(CONFIG_CAN_CC770) += cc770/ obj-$(CONFIG_CAN_C_CAN) += c_can/ +obj-$(CONFIG_CAN_CTUCANFD) += ctucanfd/ obj-$(CONFIG_CAN_FLEXCAN) += flexcan/ obj-$(CONFIG_CAN_GRCAN) += grcan.o obj-$(CONFIG_CAN_IFI_CANFD) += ifi_canfd/ diff --git a/drivers/net/can/ctucanfd/Kconfig b/drivers/net/can/ctucanfd/Kconfig new file mode 100644 index 000000000000..b5f364068f86 --- /dev/null +++ b/drivers/net/can/ctucanfd/Kconfig @@ -0,0 +1,12 @@ +config CAN_CTUCANFD + tristate "CTU CAN-FD IP core" + help + This driver adds support for the CTU CAN FD open-source IP core. + More documentation and core sources at project page + (https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core). + The core integration to Xilinx Zynq system as platform driver + is available (https://gitlab.fel.cvut.cz/canbus/zynq/zynq-can-sja1000-top). + Implementation on Intel FPGA-based PCI Express board is available + from project (https://gitlab.fel.cvut.cz/canbus/pcie-ctucanfd) and + on Intel SoC from project (https://gitlab.fel.cvut.cz/canbus/intel-soc-ctucanfd). + Guidepost CTU FEE CAN bus projects page https://canbus.pages.fel.cvut.cz/ . diff --git a/drivers/net/can/ctucanfd/Makefile b/drivers/net/can/ctucanfd/Makefile new file mode 100644 index 000000000000..259ecb0222c2 --- /dev/null +++ b/drivers/net/can/ctucanfd/Makefile @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# +# Makefile for the CTU CAN-FD IP module drivers +# + +obj-$(CONFIG_CAN_CTUCANFD) := ctucanfd.o +ctucanfd-y := ctucanfd_base.o diff --git a/drivers/net/can/ctucanfd/ctucanfd.h b/drivers/net/can/ctucanfd/ctucanfd.h new file mode 100644 index 000000000000..0e9904f6a05d --- /dev/null +++ b/drivers/net/can/ctucanfd/ctucanfd.h @@ -0,0 +1,82 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/******************************************************************************* + * + * CTU CAN FD IP Core + * + * Copyright (C) 2015-2018 Ondrej Ille <ondrej.ille@xxxxxxxxx> FEE CTU + * Copyright (C) 2018-2021 Ondrej Ille <ondrej.ille@xxxxxxxxx> self-funded + * Copyright (C) 2018-2019 Martin Jerabek <martin.jerabek01@xxxxxxxxx> FEE CTU + * Copyright (C) 2018-2021 Pavel Pisa <pisa@xxxxxxxxxxxxxxxx> FEE CTU/self-funded + * + * Project advisors: + * Jiri Novak <jnovak@xxxxxxxxxxx> + * Pavel Pisa <pisa@xxxxxxxxxxxxxxxx> + * + * Department of Measurement (http://meas.fel.cvut.cz/) + * Faculty of Electrical Engineering (http://www.fel.cvut.cz) + * Czech Technical University (http://www.cvut.cz/) + ******************************************************************************/ + +#ifndef __CTUCANFD__ +#define __CTUCANFD__ + +#include <linux/netdevice.h> +#include <linux/can/dev.h> +#include <linux/list.h> + +enum ctu_can_fd_can_registers; + +struct ctucan_priv { + struct can_priv can; /* must be first member! */ + + void __iomem *mem_base; + u32 (*read_reg)(struct ctucan_priv *priv, + enum ctu_can_fd_can_registers reg); + void (*write_reg)(struct ctucan_priv *priv, + enum ctu_can_fd_can_registers reg, u32 val); + + unsigned int txb_head; + unsigned int txb_tail; + u32 txb_prio; + unsigned int ntxbufs; + spinlock_t tx_lock; /* spinlock to serialize allocation and processing of TX buffers */ + + struct napi_struct napi; + struct device *dev; + struct clk *can_clk; + + int irq_flags; + unsigned long drv_flags; + + u32 rxfrm_first_word; + + struct list_head peers_on_pdev; +}; + +/** + * ctucan_probe_common - Device type independent registration call + * + * This function does all the memory allocation and registration for the CAN + * device. + * + * @dev: Handle to the generic device structure + * @addr: Base address of CTU CAN FD core address + * @irq: Interrupt number + * @ntxbufs: Number of implemented Tx buffers + * @can_clk_rate: Clock rate, if 0 then clock are taken from device node + * @pm_enable_call: Whether pm_runtime_enable should be called + * @set_drvdata_fnc: Function to set network driver data for physical device + * + * Return: 0 on success and failure value on error + */ +int ctucan_probe_common(struct device *dev, void __iomem *addr, + int irq, unsigned int ntxbufs, + unsigned long can_clk_rate, + int pm_enable_call, + void (*set_drvdata_fnc)(struct device *dev, + struct net_device *ndev)); + +int ctucan_suspend(struct device *dev) __maybe_unused; +int ctucan_resume(struct device *dev) __maybe_unused; + +#endif /*__CTUCANFD__*/ diff --git a/drivers/net/can/ctucanfd/ctucanfd_base.c b/drivers/net/can/ctucanfd/ctucanfd_base.c new file mode 100644 index 000000000000..7a4550f60abb --- /dev/null +++ b/drivers/net/can/ctucanfd/ctucanfd_base.c @@ -0,0 +1,1490 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/******************************************************************************* + * + * CTU CAN FD IP Core + * + * Copyright (C) 2015-2018 Ondrej Ille <ondrej.ille@xxxxxxxxx> FEE CTU + * Copyright (C) 2018-2021 Ondrej Ille <ondrej.ille@xxxxxxxxx> self-funded + * Copyright (C) 2018-2019 Martin Jerabek <martin.jerabek01@xxxxxxxxx> FEE CTU + * Copyright (C) 2018-2022 Pavel Pisa <pisa@xxxxxxxxxxxxxxxx> FEE CTU/self-funded + * + * Project advisors: + * Jiri Novak <jnovak@xxxxxxxxxxx> + * Pavel Pisa <pisa@xxxxxxxxxxxxxxxx> + * + * Department of Measurement (http://meas.fel.cvut.cz/) + * Faculty of Electrical Engineering (http://www.fel.cvut.cz) + * Czech Technical University (http://www.cvut.cz/) + ******************************************************************************/ + +#include <linux/clk.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/bitfield.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/skbuff.h> +#include <linux/string.h> +#include <linux/types.h> +#include <linux/can/error.h> +#include <linux/can/led.h> +#include <linux/pm_runtime.h> +#include <linux/version.h> + +#include "ctucanfd.h" +#include "ctucanfd_kregs.h" +#include "ctucanfd_kframe.h" + +#ifdef DEBUG +#define ctucan_netdev_dbg(ndev, args...) \ + netdev_dbg(ndev, args) +#else +#define ctucan_netdev_dbg(...) do { } while (0) +#endif + +#define CTUCANFD_ID 0xCAFD + +/* TX buffer rotation: + * - when a buffer transitions to empty state, rotate order and priorities + * - if more buffers seem to transition at the same time, rotate by the number of buffers + * - it may be assumed that buffers transition to empty state in FIFO order (because we manage + * priorities that way) + * - at frame filling, do not rotate anything, just increment buffer modulo counter + */ + +#define CTUCANFD_FLAG_RX_FFW_BUFFERED 1 + +#define CTUCAN_STATE_TO_TEXT_ENTRY(st) \ + [st] = #st + +enum ctucan_txtb_status { + TXT_NOT_EXIST = 0x0, + TXT_RDY = 0x1, + TXT_TRAN = 0x2, + TXT_ABTP = 0x3, + TXT_TOK = 0x4, + TXT_ERR = 0x6, + TXT_ABT = 0x7, + TXT_ETY = 0x8, +}; + +enum ctucan_txtb_command { + TXT_CMD_SET_EMPTY = 0x01, + TXT_CMD_SET_READY = 0x02, + TXT_CMD_SET_ABORT = 0x04 +}; + +static const struct can_bittiming_const ctu_can_fd_bit_timing_max = { + .name = "ctu_can_fd", + .tseg1_min = 2, + .tseg1_max = 190, + .tseg2_min = 1, + .tseg2_max = 63, + .sjw_max = 31, + .brp_min = 1, + .brp_max = 8, + .brp_inc = 1, +}; + +static const struct can_bittiming_const ctu_can_fd_bit_timing_data_max = { + .name = "ctu_can_fd", + .tseg1_min = 2, + .tseg1_max = 94, + .tseg2_min = 1, + .tseg2_max = 31, + .sjw_max = 31, + .brp_min = 1, + .brp_max = 2, + .brp_inc = 1, +}; + +static const char * const ctucan_state_strings[CAN_STATE_MAX] = { + CTUCAN_STATE_TO_TEXT_ENTRY(CAN_STATE_ERROR_ACTIVE), + CTUCAN_STATE_TO_TEXT_ENTRY(CAN_STATE_ERROR_WARNING), + CTUCAN_STATE_TO_TEXT_ENTRY(CAN_STATE_ERROR_PASSIVE), + CTUCAN_STATE_TO_TEXT_ENTRY(CAN_STATE_BUS_OFF), + CTUCAN_STATE_TO_TEXT_ENTRY(CAN_STATE_STOPPED), + CTUCAN_STATE_TO_TEXT_ENTRY(CAN_STATE_SLEEPING) +}; + +static void ctucan_write32_le(struct ctucan_priv *priv, + enum ctu_can_fd_can_registers reg, u32 val) +{ + iowrite32(val, priv->mem_base + reg); +} + +static void ctucan_write32_be(struct ctucan_priv *priv, + enum ctu_can_fd_can_registers reg, u32 val) +{ + iowrite32be(val, priv->mem_base + reg); +} + +static u32 ctucan_read32_le(struct ctucan_priv *priv, + enum ctu_can_fd_can_registers reg) +{ + return ioread32(priv->mem_base + reg); +} + +static u32 ctucan_read32_be(struct ctucan_priv *priv, + enum ctu_can_fd_can_registers reg) +{ + return ioread32be(priv->mem_base + reg); +} + +static inline void ctucan_write32(struct ctucan_priv *priv, enum ctu_can_fd_can_registers reg, + u32 val) +{ + priv->write_reg(priv, reg, val); +} + +static inline u32 ctucan_read32(struct ctucan_priv *priv, enum ctu_can_fd_can_registers reg) +{ + return priv->read_reg(priv, reg); +} + +static void ctucan_write_txt_buf(struct ctucan_priv *priv, enum ctu_can_fd_can_registers buf_base, + u32 offset, u32 val) +{ + priv->write_reg(priv, buf_base + offset, val); +} + +#define CTU_CAN_FD_TXTNF(priv) (!!FIELD_GET(REG_STATUS_TXNF, ctucan_read32(priv, CTUCANFD_STATUS))) +#define CTU_CAN_FD_ENABLED(priv) (!!FIELD_GET(REG_MODE_ENA, ctucan_read32(priv, CTUCANFD_MODE))) + +/** + * ctucan_state_to_str() - Converts CAN controller state code to corresponding text + * @state: CAN controller state code + * + * Return: Pointer to string representation of the error state + */ +static const char *ctucan_state_to_str(enum can_state state) +{ + const char *txt = NULL; + + if (state >= 0 && state < CAN_STATE_MAX) + txt = ctucan_state_strings[state]; + return txt ? txt : "UNKNOWN"; +} + +/** + * ctucan_reset() - Issues software reset request to CTU CAN FD + * @ndev: Pointer to net_device structure + * + * Return: 0 for success, -%ETIMEDOUT if CAN controller does not leave reset + */ +static int ctucan_reset(struct net_device *ndev) +{ + struct ctucan_priv *priv = netdev_priv(ndev); + int i = 100; + + ctucan_netdev_dbg(ndev, "%s\n", __func__); + + ctucan_write32(priv, CTUCANFD_MODE, REG_MODE_RST); + clear_bit(CTUCANFD_FLAG_RX_FFW_BUFFERED, &priv->drv_flags); + + do { + u16 device_id = FIELD_GET(REG_DEVICE_ID_DEVICE_ID, + ctucan_read32(priv, CTUCANFD_DEVICE_ID)); + + if (device_id == 0xCAFD) + return 0; + if (!i--) { + netdev_warn(ndev, "device did not leave reset\n"); + return -ETIMEDOUT; + } + usleep_range(100, 200); + } while (1); +} + +/** + * ctucan_set_btr() - Sets CAN bus bit timing in CTU CAN FD + * @ndev: Pointer to net_device structure + * @bt: Pointer to Bit timing structure + * @nominal: True - Nominal bit timing, False - Data bit timing + * + * Return: 0 - OK, -%EPERM if controller is enabled + */ +static int ctucan_set_btr(struct net_device *ndev, struct can_bittiming *bt, bool nominal) +{ + struct ctucan_priv *priv = netdev_priv(ndev); + int max_ph1_len = 31; + u32 btr = 0; + u32 prop_seg = bt->prop_seg; + u32 phase_seg1 = bt->phase_seg1; + + if (CTU_CAN_FD_ENABLED(priv)) { + netdev_err(ndev, "BUG! Cannot set bittiming - CAN is enabled\n"); + return -EPERM; + } + + if (nominal) + max_ph1_len = 63; + + /* The timing calculation functions have only constraints on tseg1, which is prop_seg + + * phase1_seg combined. tseg1 is then split in half and stored into prog_seg and phase_seg1. + * In CTU CAN FD, PROP is 6/7 bits wide but PH1 only 6/5, so we must re-distribute the + * values here. + */ + if (phase_seg1 > max_ph1_len) { + prop_seg += phase_seg1 - max_ph1_len; + phase_seg1 = max_ph1_len; + bt->prop_seg = prop_seg; + bt->phase_seg1 = phase_seg1; + } + + if (nominal) { + btr = FIELD_PREP(REG_BTR_PROP, prop_seg); + btr |= FIELD_PREP(REG_BTR_PH1, phase_seg1); + btr |= FIELD_PREP(REG_BTR_PH2, bt->phase_seg2); + btr |= FIELD_PREP(REG_BTR_BRP, bt->brp); + btr |= FIELD_PREP(REG_BTR_SJW, bt->sjw); + + ctucan_write32(priv, CTUCANFD_BTR, btr); + } else { + btr = FIELD_PREP(REG_BTR_FD_PROP_FD, prop_seg); + btr |= FIELD_PREP(REG_BTR_FD_PH1_FD, phase_seg1); + btr |= FIELD_PREP(REG_BTR_FD_PH2_FD, bt->phase_seg2); + btr |= FIELD_PREP(REG_BTR_FD_BRP_FD, bt->brp); + btr |= FIELD_PREP(REG_BTR_FD_SJW_FD, bt->sjw); + + ctucan_write32(priv, CTUCANFD_BTR_FD, btr); + } + + return 0; +} + +/** + * ctucan_set_bittiming() - CAN set nominal bit timing routine + * @ndev: Pointer to net_device structure + * + * Return: 0 on success, -%EPERM on error + */ +static int ctucan_set_bittiming(struct net_device *ndev) +{ + struct ctucan_priv *priv = netdev_priv(ndev); + struct can_bittiming *bt = &priv->can.bittiming; + + ctucan_netdev_dbg(ndev, "%s\n", __func__); + + /* Note that bt may be modified here */ + return ctucan_set_btr(ndev, bt, true); +} + +/** + * ctucan_set_data_bittiming() - CAN set data bit timing routine + * @ndev: Pointer to net_device structure + * + * Return: 0 on success, -%EPERM on error + */ +static int ctucan_set_data_bittiming(struct net_device *ndev) +{ + struct ctucan_priv *priv = netdev_priv(ndev); + struct can_bittiming *dbt = &priv->can.data_bittiming; + + ctucan_netdev_dbg(ndev, "%s\n", __func__); + + /* Note that dbt may be modified here */ + return ctucan_set_btr(ndev, dbt, false); +} + +/** + * ctucan_set_secondary_sample_point() - Sets secondary sample point in CTU CAN FD + * @ndev: Pointer to net_device structure + * + * Return: 0 on success, -%EPERM if controller is enabled + */ +static int ctucan_set_secondary_sample_point(struct net_device *ndev) +{ + struct ctucan_priv *priv = netdev_priv(ndev); + struct can_bittiming *dbt = &priv->can.data_bittiming; + int ssp_offset = 0; + u32 ssp_cfg = 0; /* No SSP by default */ + + ctucan_netdev_dbg(ndev, "%s\n", __func__); + + if (CTU_CAN_FD_ENABLED(priv)) { + netdev_err(ndev, "BUG! Cannot set SSP - CAN is enabled\n"); + return -EPERM; + } + + /* Use SSP for bit-rates above 1 Mbits/s */ + if (dbt->bitrate > 1000000) { + /* Calculate SSP in minimal time quanta */ + ssp_offset = (priv->can.clock.freq / 1000) * dbt->sample_point / dbt->bitrate; + + if (ssp_offset > 127) { + netdev_warn(ndev, "SSP offset saturated to 127\n"); + ssp_offset = 127; + } + + ssp_cfg = FIELD_PREP(REG_TRV_DELAY_SSP_OFFSET, ssp_offset); + ssp_cfg |= FIELD_PREP(REG_TRV_DELAY_SSP_SRC, 0x1); + } + + ctucan_write32(priv, CTUCANFD_TRV_DELAY, ssp_cfg); + + return 0; +} + +/** + * ctucan_set_mode() - Sets CTU CAN FDs mode + * @priv: Pointer to private data + * @mode: Pointer to controller modes to be set + */ +static void ctucan_set_mode(struct ctucan_priv *priv, const struct can_ctrlmode *mode) +{ + u32 mode_reg = ctucan_read32(priv, CTUCANFD_MODE); + + mode_reg = (mode->flags & CAN_CTRLMODE_LOOPBACK) ? + (mode_reg | REG_MODE_ILBP) : + (mode_reg & ~REG_MODE_ILBP); + + mode_reg = (mode->flags & CAN_CTRLMODE_LISTENONLY) ? + (mode_reg | REG_MODE_BMM) : + (mode_reg & ~REG_MODE_BMM); + + mode_reg = (mode->flags & CAN_CTRLMODE_FD) ? + (mode_reg | REG_MODE_FDE) : + (mode_reg & ~REG_MODE_FDE); + + mode_reg = (mode->flags & CAN_CTRLMODE_PRESUME_ACK) ? + (mode_reg | REG_MODE_ACF) : + (mode_reg & ~REG_MODE_ACF); + + mode_reg = (mode->flags & CAN_CTRLMODE_FD_NON_ISO) ? + (mode_reg | REG_MODE_NISOFD) : + (mode_reg & ~REG_MODE_NISOFD); + + /* One shot mode supported indirectly via Retransmit limit */ + mode_reg &= ~FIELD_PREP(REG_MODE_RTRTH, 0xF); + mode_reg = (mode->flags & CAN_CTRLMODE_ONE_SHOT) ? + (mode_reg | REG_MODE_RTRLE) : + (mode_reg & ~REG_MODE_RTRLE); + + /* Some bits fixed: + * TSTM - Off, User shall not be able to change REC/TEC by hand during operation + */ + mode_reg &= ~REG_MODE_TSTM; + + ctucan_write32(priv, CTUCANFD_MODE, mode_reg); +} + +/** + * ctucan_chip_start() - This routine starts the driver + * @ndev: Pointer to net_device structure + * + * Routine expects that chip is in reset state. It setups initial + * Tx buffers for FIFO priorities, sets bittiming, enables interrupts, + * switches core to operational mode and changes controller + * state to %CAN_STATE_STOPPED. + * + * Return: 0 on success and failure value on error + */ +static int ctucan_chip_start(struct net_device *ndev) +{ + struct ctucan_priv *priv = netdev_priv(ndev); + u32 int_ena, int_msk; + u32 mode_reg; + int err; + struct can_ctrlmode mode; + + ctucan_netdev_dbg(ndev, "%s\n", __func__); + + priv->txb_prio = 0x01234567; + priv->txb_head = 0; + priv->txb_tail = 0; + ctucan_write32(priv, CTUCANFD_TX_PRIORITY, priv->txb_prio); + + /* Configure bit-rates and ssp */ + err = ctucan_set_bittiming(ndev); + if (err < 0) + return err; + + err = ctucan_set_data_bittiming(ndev); + if (err < 0) + return err; + + err = ctucan_set_secondary_sample_point(ndev); + if (err < 0) + return err; + + /* Configure modes */ + mode.flags = priv->can.ctrlmode; + mode.mask = 0xFFFFFFFF; + ctucan_set_mode(priv, &mode); + + /* Configure interrupts */ + int_ena = REG_INT_STAT_RBNEI | + REG_INT_STAT_TXBHCI | + REG_INT_STAT_EWLI | + REG_INT_STAT_FCSI; + + /* Bus error reporting -> Allow Error/Arb.lost interrupts */ + if (priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING) { + int_ena |= REG_INT_STAT_ALI | + REG_INT_STAT_BEI; + } + + int_msk = ~int_ena; /* Mask all disabled interrupts */ + + /* It's after reset, so there is no need to clear anything */ + ctucan_write32(priv, CTUCANFD_INT_MASK_SET, int_msk); + ctucan_write32(priv, CTUCANFD_INT_ENA_SET, int_ena); + + /* Controller enters ERROR_ACTIVE on initial FCSI */ + priv->can.state = CAN_STATE_STOPPED; + + /* Enable the controller */ + mode_reg = ctucan_read32(priv, CTUCANFD_MODE); + mode_reg |= REG_MODE_ENA; + ctucan_write32(priv, CTUCANFD_MODE, mode_reg); + + return 0; +} + +/** + * ctucan_do_set_mode() - Sets mode of the driver + * @ndev: Pointer to net_device structure + * @mode: Tells the mode of the driver + * + * This check the drivers state and calls the corresponding modes to set. + * + * Return: 0 on success and failure value on error + */ +static int ctucan_do_set_mode(struct net_device *ndev, enum can_mode mode) +{ + int ret; + + ctucan_netdev_dbg(ndev, "%s\n", __func__); + + switch (mode) { + case CAN_MODE_START: + ret = ctucan_reset(ndev); + if (ret < 0) + return ret; + ret = ctucan_chip_start(ndev); + if (ret < 0) { + netdev_err(ndev, "ctucan_chip_start failed!\n"); + return ret; + } + netif_wake_queue(ndev); + break; + default: + ret = -EOPNOTSUPP; + break; + } + + return ret; +} + +/** + * ctucan_get_tx_status() - Gets status of TXT buffer + * @priv: Pointer to private data + * @buf: Buffer index (0-based) + * + * Return: Status of TXT buffer + */ +static inline enum ctucan_txtb_status ctucan_get_tx_status(struct ctucan_priv *priv, u8 buf) +{ + u32 tx_status = ctucan_read32(priv, CTUCANFD_TX_STATUS); + enum ctucan_txtb_status status = (tx_status >> (buf * 4)) & 0x7; + + return status; +} + +/** + * ctucan_is_txt_buf_writable() - Checks if frame can be inserted to TXT Buffer + * @priv: Pointer to private data + * @buf: Buffer index (0-based) + * + * Return: True - Frame can be inserted to TXT Buffer, False - If attempted, frame will not be + * inserted to TXT Buffer + */ +static bool ctucan_is_txt_buf_writable(struct ctucan_priv *priv, u8 buf) +{ + enum ctucan_txtb_status buf_status; + + buf_status = ctucan_get_tx_status(priv, buf); + if (buf_status == TXT_RDY || buf_status == TXT_TRAN || buf_status == TXT_ABTP) + return false; + + return true; +} + +/** + * ctucan_insert_frame() - Inserts frame to TXT buffer + * @priv: Pointer to private data + * @cf: Pointer to CAN frame to be inserted + * @buf: TXT Buffer index to which frame is inserted (0-based) + * @isfdf: True - CAN FD Frame, False - CAN 2.0 Frame + * + * Return: True - Frame inserted successfully + * False - Frame was not inserted due to one of: + * 1. TXT Buffer is not writable (it is in wrong state) + * 2. Invalid TXT buffer index + * 3. Invalid frame length + */ +static bool ctucan_insert_frame(struct ctucan_priv *priv, const struct canfd_frame *cf, u8 buf, + bool isfdf) +{ + u32 buf_base; + u32 ffw = 0; + u32 idw = 0; + unsigned int i; + + if (buf >= priv->ntxbufs) + return false; + + if (!ctucan_is_txt_buf_writable(priv, buf)) + return false; + + if (cf->len > CANFD_MAX_DLEN) + return false; + + /* Prepare Frame format */ + if (cf->can_id & CAN_RTR_FLAG) + ffw |= REG_FRAME_FORMAT_W_RTR; + + if (cf->can_id & CAN_EFF_FLAG) + ffw |= REG_FRAME_FORMAT_W_IDE; + + if (isfdf) { + ffw |= REG_FRAME_FORMAT_W_FDF; + if (cf->flags & CANFD_BRS) + ffw |= REG_FRAME_FORMAT_W_BRS; + } + + ffw |= FIELD_PREP(REG_FRAME_FORMAT_W_DLC, can_fd_len2dlc(cf->len)); + + /* Prepare identifier */ + if (cf->can_id & CAN_EFF_FLAG) + idw = cf->can_id & CAN_EFF_MASK; + else + idw = FIELD_PREP(REG_IDENTIFIER_W_IDENTIFIER_BASE, cf->can_id & CAN_SFF_MASK); + + /* Write ID, Frame format, Don't write timestamp -> Time triggered transmission disabled */ + buf_base = (buf + 1) * 0x100; + ctucan_write_txt_buf(priv, buf_base, CTUCANFD_FRAME_FORMAT_W, ffw); + ctucan_write_txt_buf(priv, buf_base, CTUCANFD_IDENTIFIER_W, idw); + + /* Write Data payload */ + if (!(cf->can_id & CAN_RTR_FLAG)) { + for (i = 0; i < cf->len; i += 4) { + u32 data = le32_to_cpu(*(__le32 *)(cf->data + i)); + + ctucan_write_txt_buf(priv, buf_base, CTUCANFD_DATA_1_4_W + i, data); + } + } + + return true; +} + +/** + * ctucan_give_txtb_cmd() - Applies command on TXT buffer + * @priv: Pointer to private data + * @cmd: Command to give + * @buf: Buffer index (0-based) + */ +static void ctucan_give_txtb_cmd(struct ctucan_priv *priv, enum ctucan_txtb_command cmd, u8 buf) +{ + u32 tx_cmd = cmd; + + tx_cmd |= 1 << (buf + 8); + ctucan_write32(priv, CTUCANFD_TX_COMMAND, tx_cmd); +} + +/** + * ctucan_start_xmit() - Starts the transmission + * @skb: sk_buff pointer that contains data to be Txed + * @ndev: Pointer to net_device structure + * + * Invoked from upper layers to initiate transmission. Uses the next available free TXT Buffer and + * populates its fields to start the transmission. + * + * Return: %NETDEV_TX_OK on success, %NETDEV_TX_BUSY when no free TXT buffer is available, + * negative return values reserved for error cases + */ +static netdev_tx_t ctucan_start_xmit(struct sk_buff *skb, struct net_device *ndev) +{ + struct ctucan_priv *priv = netdev_priv(ndev); + struct canfd_frame *cf = (struct canfd_frame *)skb->data; + u32 txtb_id; + bool ok; + unsigned long flags; + + if (can_dropped_invalid_skb(ndev, skb)) + return NETDEV_TX_OK; + + if (unlikely(!CTU_CAN_FD_TXTNF(priv))) { + netif_stop_queue(ndev); + netdev_err(ndev, "BUG!, no TXB free when queue awake!\n"); + return NETDEV_TX_BUSY; + } + + txtb_id = priv->txb_head % priv->ntxbufs; + ctucan_netdev_dbg(ndev, "%s: using TXB#%u\n", __func__, txtb_id); + ok = ctucan_insert_frame(priv, cf, txtb_id, can_is_canfd_skb(skb)); + + if (!ok) { + netdev_err(ndev, "BUG! TXNF set but cannot insert frame into TXTB! HW Bug?"); + kfree_skb(skb); + ndev->stats.tx_dropped++; + return NETDEV_TX_OK; + } + + can_put_echo_skb(skb, ndev, txtb_id, 0); + + spin_lock_irqsave(&priv->tx_lock, flags); + ctucan_give_txtb_cmd(priv, TXT_CMD_SET_READY, txtb_id); + priv->txb_head++; + + /* Check if all TX buffers are full */ + if (!CTU_CAN_FD_TXTNF(priv)) + netif_stop_queue(ndev); + + spin_unlock_irqrestore(&priv->tx_lock, flags); + + return NETDEV_TX_OK; +} + +/** + * ctucan_read_rx_frame() - Reads frame from RX FIFO + * @priv: Pointer to CTU CAN FD's private data + * @cf: Pointer to CAN frame struct + * @ffw: Previously read frame format word + * + * Note: Frame format word must be read separately and provided in 'ffw'. + */ +static void ctucan_read_rx_frame(struct ctucan_priv *priv, struct canfd_frame *cf, u32 ffw) +{ + u32 idw; + unsigned int i; + unsigned int wc; + unsigned int len; + + idw = ctucan_read32(priv, CTUCANFD_RX_DATA); + if (FIELD_GET(REG_FRAME_FORMAT_W_IDE, ffw)) + cf->can_id = (idw & CAN_EFF_MASK) | CAN_EFF_FLAG; + else + cf->can_id = (idw >> 18) & CAN_SFF_MASK; + + /* BRS, ESI, RTR Flags */ + cf->flags = 0; + if (FIELD_GET(REG_FRAME_FORMAT_W_FDF, ffw)) { + if (FIELD_GET(REG_FRAME_FORMAT_W_BRS, ffw)) + cf->flags |= CANFD_BRS; + if (FIELD_GET(REG_FRAME_FORMAT_W_ESI_RSV, ffw)) + cf->flags |= CANFD_ESI; + } else if (FIELD_GET(REG_FRAME_FORMAT_W_RTR, ffw)) { + cf->can_id |= CAN_RTR_FLAG; + } + + wc = FIELD_GET(REG_FRAME_FORMAT_W_RWCNT, ffw) - 3; + + /* DLC */ + if (FIELD_GET(REG_FRAME_FORMAT_W_DLC, ffw) <= 8) { + len = FIELD_GET(REG_FRAME_FORMAT_W_DLC, ffw); + } else { + if (FIELD_GET(REG_FRAME_FORMAT_W_FDF, ffw)) + len = wc << 2; + else + len = 8; + } + cf->len = len; + if (unlikely(len > wc * 4)) + len = wc * 4; + + /* Timestamp - Read and throw away */ + ctucan_read32(priv, CTUCANFD_RX_DATA); + ctucan_read32(priv, CTUCANFD_RX_DATA); + + /* Data */ + for (i = 0; i < len; i += 4) { + u32 data = ctucan_read32(priv, CTUCANFD_RX_DATA); + *(__le32 *)(cf->data + i) = cpu_to_le32(data); + } + while (unlikely(i < wc * 4)) { + ctucan_read32(priv, CTUCANFD_RX_DATA); + i += 4; + } +} + +/** + * ctucan_rx() - Called from CAN ISR to complete the received frame processing + * @ndev: Pointer to net_device structure + * + * This function is invoked from the CAN isr(poll) to process the Rx frames. It does minimal + * processing and invokes "netif_receive_skb" to complete further processing. + * Return: 1 when frame is passed to the network layer, 0 when the first frame word is read but + * system is out of free SKBs temporally and left code to resolve SKB allocation later, + * -%EAGAIN in a case of empty Rx FIFO. + */ +static int ctucan_rx(struct net_device *ndev) +{ + struct ctucan_priv *priv = netdev_priv(ndev); + struct net_device_stats *stats = &ndev->stats; + struct canfd_frame *cf; + struct sk_buff *skb; + u32 ffw; + + if (test_bit(CTUCANFD_FLAG_RX_FFW_BUFFERED, &priv->drv_flags)) { + ffw = priv->rxfrm_first_word; + clear_bit(CTUCANFD_FLAG_RX_FFW_BUFFERED, &priv->drv_flags); + } else { + ffw = ctucan_read32(priv, CTUCANFD_RX_DATA); + } + + if (!FIELD_GET(REG_FRAME_FORMAT_W_RWCNT, ffw)) + return -EAGAIN; + + if (FIELD_GET(REG_FRAME_FORMAT_W_FDF, ffw)) + skb = alloc_canfd_skb(ndev, &cf); + else + skb = alloc_can_skb(ndev, (struct can_frame **)&cf); + + if (unlikely(!skb)) { + priv->rxfrm_first_word = ffw; + set_bit(CTUCANFD_FLAG_RX_FFW_BUFFERED, &priv->drv_flags); + return 0; + } + + ctucan_read_rx_frame(priv, cf, ffw); + + stats->rx_bytes += cf->len; + stats->rx_packets++; + netif_receive_skb(skb); + + return 1; +} + +/** + * ctucan_read_fault_state() - Reads CTU CAN FDs fault confinement state. + * @priv: Pointer to private data + * + * Returns: Fault confinement state of controller + */ +static enum can_state ctucan_read_fault_state(struct ctucan_priv *priv) +{ + u32 fs; + u32 rec_tec; + u32 ewl; + + fs = ctucan_read32(priv, CTUCANFD_EWL); + rec_tec = ctucan_read32(priv, CTUCANFD_REC); + ewl = FIELD_GET(REG_EWL_EW_LIMIT, fs); + + if (FIELD_GET(REG_EWL_ERA, fs)) { + if (ewl > FIELD_GET(REG_REC_REC_VAL, rec_tec) && + ewl > FIELD_GET(REG_REC_TEC_VAL, rec_tec)) + return CAN_STATE_ERROR_ACTIVE; + else + return CAN_STATE_ERROR_WARNING; + } else if (FIELD_GET(REG_EWL_ERP, fs)) { + return CAN_STATE_ERROR_PASSIVE; + } else if (FIELD_GET(REG_EWL_BOF, fs)) { + return CAN_STATE_BUS_OFF; + } + + WARN(true, "Invalid error state"); + return CAN_STATE_ERROR_PASSIVE; +} + +/** + * ctucan_get_rec_tec() - Reads REC/TEC counter values from controller + * @priv: Pointer to private data + * @bec: Pointer to Error counter structure + */ +static void ctucan_get_rec_tec(struct ctucan_priv *priv, struct can_berr_counter *bec) +{ + u32 err_ctrs = ctucan_read32(priv, CTUCANFD_REC); + + bec->rxerr = FIELD_GET(REG_REC_REC_VAL, err_ctrs); + bec->txerr = FIELD_GET(REG_REC_TEC_VAL, err_ctrs); +} + +/** + * ctucan_err_interrupt() - Error frame ISR + * @ndev: net_device pointer + * @isr: interrupt status register value + * + * This is the CAN error interrupt and it will check the type of error and forward the error + * frame to upper layers. + */ +static void ctucan_err_interrupt(struct net_device *ndev, u32 isr) +{ + struct ctucan_priv *priv = netdev_priv(ndev); + struct net_device_stats *stats = &ndev->stats; + struct can_frame *cf; + struct sk_buff *skb; + enum can_state state; + struct can_berr_counter bec; + u32 err_capt_alc; + int dologerr = net_ratelimit(); + + ctucan_get_rec_tec(priv, &bec); + state = ctucan_read_fault_state(priv); + err_capt_alc = ctucan_read32(priv, CTUCANFD_ERR_CAPT); + + if (dologerr) + netdev_info(ndev, "%s: ISR = 0x%08x, rxerr %d, txerr %d, error type %lu, pos %lu, ALC id_field %lu, bit %lu\n", + __func__, isr, bec.rxerr, bec.txerr, + FIELD_GET(REG_ERR_CAPT_ERR_TYPE, err_capt_alc), + FIELD_GET(REG_ERR_CAPT_ERR_POS, err_capt_alc), + FIELD_GET(REG_ERR_CAPT_ALC_ID_FIELD, err_capt_alc), + FIELD_GET(REG_ERR_CAPT_ALC_BIT, err_capt_alc)); + + skb = alloc_can_err_skb(ndev, &cf); + + /* EWLI: error warning limit condition met + * FCSI: fault confinement state changed + * ALI: arbitration lost (just informative) + * BEI: bus error interrupt + */ + if (FIELD_GET(REG_INT_STAT_FCSI, isr) || FIELD_GET(REG_INT_STAT_EWLI, isr)) { + netdev_info(ndev, "state changes from %s to %s\n", + ctucan_state_to_str(priv->can.state), + ctucan_state_to_str(state)); + + if (priv->can.state == state) + netdev_warn(ndev, + "current and previous state is the same! (missed interrupt?)\n"); + + priv->can.state = state; + switch (state) { + case CAN_STATE_BUS_OFF: + priv->can.can_stats.bus_off++; + can_bus_off(ndev); + if (skb) + cf->can_id |= CAN_ERR_BUSOFF; + break; + case CAN_STATE_ERROR_PASSIVE: + priv->can.can_stats.error_passive++; + if (skb) { + cf->can_id |= CAN_ERR_CRTL; + cf->data[1] = (bec.rxerr > 127) ? + CAN_ERR_CRTL_RX_PASSIVE : + CAN_ERR_CRTL_TX_PASSIVE; + cf->data[6] = bec.txerr; + cf->data[7] = bec.rxerr; + } + break; + case CAN_STATE_ERROR_WARNING: + priv->can.can_stats.error_warning++; + if (skb) { + cf->can_id |= CAN_ERR_CRTL; + cf->data[1] |= (bec.txerr > bec.rxerr) ? + CAN_ERR_CRTL_TX_WARNING : + CAN_ERR_CRTL_RX_WARNING; + cf->data[6] = bec.txerr; + cf->data[7] = bec.rxerr; + } + break; + case CAN_STATE_ERROR_ACTIVE: + cf->data[1] = CAN_ERR_CRTL_ACTIVE; + cf->data[6] = bec.txerr; + cf->data[7] = bec.rxerr; + break; + default: + netdev_warn(ndev, "unhandled error state (%d:%s)!\n", + state, ctucan_state_to_str(state)); + break; + } + } + + /* Check for Arbitration Lost interrupt */ + if (FIELD_GET(REG_INT_STAT_ALI, isr)) { + if (dologerr) + netdev_info(ndev, "arbitration lost\n"); + priv->can.can_stats.arbitration_lost++; + if (skb) { + cf->can_id |= CAN_ERR_LOSTARB; + cf->data[0] = CAN_ERR_LOSTARB_UNSPEC; + } + } + + /* Check for Bus Error interrupt */ + if (FIELD_GET(REG_INT_STAT_BEI, isr)) { + netdev_info(ndev, "bus error\n"); + priv->can.can_stats.bus_error++; + stats->rx_errors++; + if (skb) { + cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR; + cf->data[2] = CAN_ERR_PROT_UNSPEC; + cf->data[3] = CAN_ERR_PROT_LOC_UNSPEC; + } + } + + if (skb) { + stats->rx_packets++; + stats->rx_bytes += cf->can_dlc; + netif_rx(skb); + } +} + +/** + * ctucan_rx_poll() - Poll routine for rx packets (NAPI) + * @napi: NAPI structure pointer + * @quota: Max number of rx packets to be processed. + * + * This is the poll routine for rx part. It will process the packets maximux quota value. + * + * Return: Number of packets received + */ +static int ctucan_rx_poll(struct napi_struct *napi, int quota) +{ + struct net_device *ndev = napi->dev; + struct ctucan_priv *priv = netdev_priv(ndev); + int work_done = 0; + u32 status; + u32 framecnt; + int res = 1; + + framecnt = FIELD_GET(REG_RX_STATUS_RXFRC, ctucan_read32(priv, CTUCANFD_RX_STATUS)); + while (framecnt && work_done < quota && res > 0) { + res = ctucan_rx(ndev); + work_done++; + framecnt = FIELD_GET(REG_RX_STATUS_RXFRC, ctucan_read32(priv, CTUCANFD_RX_STATUS)); + } + + /* Check for RX FIFO Overflow */ + status = ctucan_read32(priv, CTUCANFD_STATUS); + if (FIELD_GET(REG_STATUS_DOR, status)) { + struct net_device_stats *stats = &ndev->stats; + struct can_frame *cf; + struct sk_buff *skb; + + netdev_info(ndev, "rx_poll: rx fifo overflow\n"); + stats->rx_over_errors++; + stats->rx_errors++; + skb = alloc_can_err_skb(ndev, &cf); + if (skb) { + cf->can_id |= CAN_ERR_CRTL; + cf->data[1] |= CAN_ERR_CRTL_RX_OVERFLOW; + stats->rx_packets++; + stats->rx_bytes += cf->can_dlc; + netif_rx(skb); + } + + /* Clear Data Overrun */ + ctucan_write32(priv, CTUCANFD_COMMAND, REG_COMMAND_CDO); + } + + if (work_done) + can_led_event(ndev, CAN_LED_EVENT_RX); + + if (!framecnt && res != 0) { + if (napi_complete_done(napi, work_done)) { + /* Clear and enable RBNEI. It is level-triggered, so + * there is no race condition. + */ + ctucan_write32(priv, CTUCANFD_INT_STAT, REG_INT_STAT_RBNEI); + ctucan_write32(priv, CTUCANFD_INT_MASK_CLR, REG_INT_STAT_RBNEI); + } + } + + return work_done; +} + +/** + * ctucan_rotate_txb_prio() - Rotates priorities of TXT Buffers + * @ndev: net_device pointer + */ +static void ctucan_rotate_txb_prio(struct net_device *ndev) +{ + struct ctucan_priv *priv = netdev_priv(ndev); + u32 prio = priv->txb_prio; + + prio = (prio << 4) | ((prio >> ((priv->ntxbufs - 1) * 4)) & 0xF); + ctucan_netdev_dbg(ndev, "%s: from 0x%08x to 0x%08x\n", __func__, priv->txb_prio, prio); + priv->txb_prio = prio; + ctucan_write32(priv, CTUCANFD_TX_PRIORITY, prio); +} + +/** + * ctucan_tx_interrupt() - Tx done Isr + * @ndev: net_device pointer + */ +static void ctucan_tx_interrupt(struct net_device *ndev) +{ + struct ctucan_priv *priv = netdev_priv(ndev); + struct net_device_stats *stats = &ndev->stats; + bool first = true; + bool some_buffers_processed; + unsigned long flags; + enum ctucan_txtb_status txtb_status; + u32 txtb_id; + + /* read tx_status + * if txb[n].finished (bit 2) + * if ok -> echo + * if error / aborted -> ?? (find how to handle oneshot mode) + * txb_tail++ + */ + do { + spin_lock_irqsave(&priv->tx_lock, flags); + + some_buffers_processed = false; + while ((int)(priv->txb_head - priv->txb_tail) > 0) { + txtb_id = priv->txb_tail % priv->ntxbufs; + txtb_status = ctucan_get_tx_status(priv, txtb_id); + + ctucan_netdev_dbg(ndev, "TXI: TXB#%u: status 0x%x\n", txtb_id, txtb_status); + + switch (txtb_status) { + case TXT_TOK: + ctucan_netdev_dbg(ndev, "TXT_OK\n"); + stats->tx_bytes += can_get_echo_skb(ndev, txtb_id, NULL); + stats->tx_packets++; + break; + case TXT_ERR: + /* This indicated that retransmit limit has been reached. Obviously + * we should not echo the frame, but also not indicate any kind of + * error. If desired, it was already reported (possible multiple + * times) on each arbitration lost. + */ + netdev_warn(ndev, "TXB in Error state\n"); + can_free_echo_skb(ndev, txtb_id, NULL); + stats->tx_dropped++; + break; + case TXT_ABT: + /* Same as for TXT_ERR, only with different cause. We *could* + * re-queue the frame, but multiqueue/abort is not supported yet + * anyway. + */ + netdev_warn(ndev, "TXB in Aborted state\n"); + can_free_echo_skb(ndev, txtb_id, NULL); + stats->tx_dropped++; + break; + default: + /* Bug only if the first buffer is not finished, otherwise it is + * pretty much expected. + */ + if (first) { + netdev_err(ndev, + "BUG: TXB#%u not in a finished state (0x%x)!\n", + txtb_id, txtb_status); + spin_unlock_irqrestore(&priv->tx_lock, flags); + /* do not clear nor wake */ + return; + } + goto clear; + } + priv->txb_tail++; + first = false; + some_buffers_processed = true; + /* Adjust priorities *before* marking the buffer as empty. */ + ctucan_rotate_txb_prio(ndev); + ctucan_give_txtb_cmd(priv, TXT_CMD_SET_EMPTY, txtb_id); + } +clear: + spin_unlock_irqrestore(&priv->tx_lock, flags); + + /* If no buffers were processed this time, we cannot clear - that would introduce + * a race condition. + */ + if (some_buffers_processed) { + /* Clear the interrupt again. We do not want to receive again interrupt for + * the buffer already handled. If it is the last finished one then it would + * cause log of spurious interrupt. + */ + ctucan_write32(priv, CTUCANFD_INT_STAT, REG_INT_STAT_TXBHCI); + } + } while (some_buffers_processed); + + can_led_event(ndev, CAN_LED_EVENT_TX); + + spin_lock_irqsave(&priv->tx_lock, flags); + + /* Check if at least one TX buffer is free */ + if (CTU_CAN_FD_TXTNF(priv)) + netif_wake_queue(ndev); + + spin_unlock_irqrestore(&priv->tx_lock, flags); +} + +/** + * ctucan_interrupt() - CAN Isr + * @irq: irq number + * @dev_id: device id poniter + * + * This is the CTU CAN FD ISR. It checks for the type of interrupt + * and invokes the corresponding ISR. + * + * Return: + * IRQ_NONE - If CAN device is in sleep mode, IRQ_HANDLED otherwise + */ +static irqreturn_t ctucan_interrupt(int irq, void *dev_id) +{ + struct net_device *ndev = (struct net_device *)dev_id; + struct ctucan_priv *priv = netdev_priv(ndev); + u32 isr, icr; + u32 imask; + int irq_loops; + + ctucan_netdev_dbg(ndev, "%s\n", __func__); + + for (irq_loops = 0; irq_loops < 10000; irq_loops++) { + /* Get the interrupt status */ + isr = ctucan_read32(priv, CTUCANFD_INT_STAT); + + if (!isr) + return irq_loops ? IRQ_HANDLED : IRQ_NONE; + + /* Receive Buffer Not Empty Interrupt */ + if (FIELD_GET(REG_INT_STAT_RBNEI, isr)) { + ctucan_netdev_dbg(ndev, "RXBNEI\n"); + /* Mask RXBNEI the first, then clear interrupt and schedule NAPI. Even if + * another IRQ fires, RBNEI will always be 0 (masked). + */ + icr = REG_INT_STAT_RBNEI; + ctucan_write32(priv, CTUCANFD_INT_MASK_SET, icr); + ctucan_write32(priv, CTUCANFD_INT_STAT, icr); + napi_schedule(&priv->napi); + } + + /* TXT Buffer HW Command Interrupt */ + if (FIELD_GET(REG_INT_STAT_TXBHCI, isr)) { + ctucan_netdev_dbg(ndev, "TXBHCI\n"); + /* Cleared inside */ + ctucan_tx_interrupt(ndev); + } + + /* Error interrupts */ + if (FIELD_GET(REG_INT_STAT_EWLI, isr) || + FIELD_GET(REG_INT_STAT_FCSI, isr) || + FIELD_GET(REG_INT_STAT_ALI, isr)) { + icr = isr & (REG_INT_STAT_EWLI | REG_INT_STAT_FCSI | REG_INT_STAT_ALI); + + ctucan_netdev_dbg(ndev, "some ERR interrupt: clearing 0x%08x\n", icr); + ctucan_write32(priv, CTUCANFD_INT_STAT, icr); + ctucan_err_interrupt(ndev, isr); + } + /* Ignore RI, TI, LFI, RFI, BSI */ + } + + netdev_err(ndev, "%s: stuck interrupt (isr=0x%08x), stopping\n", __func__, isr); + + if (FIELD_GET(REG_INT_STAT_TXBHCI, isr)) { + int i; + + netdev_err(ndev, "txb_head=0x%08x txb_tail=0x%08x\n", + priv->txb_head, priv->txb_tail); + for (i = 0; i < priv->ntxbufs; i++) { + u32 status = ctucan_get_tx_status(priv, i); + + netdev_err(ndev, "txb[%d] txb status=0x%08x\n", i, status); + } + } + + imask = 0xffffffff; + ctucan_write32(priv, CTUCANFD_INT_ENA_CLR, imask); + ctucan_write32(priv, CTUCANFD_INT_MASK_SET, imask); + + return IRQ_HANDLED; +} + +/** + * ctucan_chip_stop() - Driver stop routine + * @ndev: Pointer to net_device structure + * + * This is the drivers stop routine. It will disable the + * interrupts and disable the controller. + */ +static void ctucan_chip_stop(struct net_device *ndev) +{ + struct ctucan_priv *priv = netdev_priv(ndev); + u32 mask = 0xffffffff; + u32 mode; + + ctucan_netdev_dbg(ndev, "%s\n", __func__); + + /* Disable interrupts and disable CAN */ + ctucan_write32(priv, CTUCANFD_INT_ENA_CLR, mask); + ctucan_write32(priv, CTUCANFD_INT_MASK_SET, mask); + mode = ctucan_read32(priv, CTUCANFD_MODE); + mode &= ~REG_MODE_ENA; + ctucan_write32(priv, CTUCANFD_MODE, mode); + + priv->can.state = CAN_STATE_STOPPED; +} + +/** + * ctucan_open() - Driver open routine + * @ndev: Pointer to net_device structure + * + * This is the driver open routine. + * Return: 0 on success and failure value on error + */ +static int ctucan_open(struct net_device *ndev) +{ + struct ctucan_priv *priv = netdev_priv(ndev); + int ret; + + ctucan_netdev_dbg(ndev, "%s\n", __func__); + + ret = pm_runtime_get_sync(priv->dev); + if (ret < 0) { + netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n", + __func__, ret); + pm_runtime_put_noidle(priv->dev); + return ret; + } + + ret = ctucan_reset(ndev); + if (ret < 0) + goto err_reset; + + /* Common open */ + ret = open_candev(ndev); + if (ret) { + netdev_warn(ndev, "open_candev failed!\n"); + goto err_open; + } + + ret = request_irq(ndev->irq, ctucan_interrupt, priv->irq_flags, ndev->name, ndev); + if (ret < 0) { + netdev_err(ndev, "irq allocation for CAN failed\n"); + goto err_irq; + } + + ret = ctucan_chip_start(ndev); + if (ret < 0) { + netdev_err(ndev, "ctucan_chip_start failed!\n"); + goto err_chip_start; + } + + netdev_info(ndev, "ctu_can_fd device registered\n"); + can_led_event(ndev, CAN_LED_EVENT_OPEN); + napi_enable(&priv->napi); + netif_start_queue(ndev); + + return 0; + +err_chip_start: + free_irq(ndev->irq, ndev); +err_irq: + close_candev(ndev); +err_open: +err_reset: + pm_runtime_put(priv->dev); + + return ret; +} + +/** + * ctucan_close() - Driver close routine + * @ndev: Pointer to net_device structure + * + * Return: 0 always + */ +static int ctucan_close(struct net_device *ndev) +{ + struct ctucan_priv *priv = netdev_priv(ndev); + + ctucan_netdev_dbg(ndev, "%s\n", __func__); + + netif_stop_queue(ndev); + napi_disable(&priv->napi); + ctucan_chip_stop(ndev); + free_irq(ndev->irq, ndev); + close_candev(ndev); + + can_led_event(ndev, CAN_LED_EVENT_STOP); + pm_runtime_put(priv->dev); + + return 0; +} + +/** + * ctucan_get_berr_counter() - error counter routine + * @ndev: Pointer to net_device structure + * @bec: Pointer to can_berr_counter structure + * + * This is the driver error counter routine. + * Return: 0 on success and failure value on error + */ +static int ctucan_get_berr_counter(const struct net_device *ndev, struct can_berr_counter *bec) +{ + struct ctucan_priv *priv = netdev_priv(ndev); + int ret; + + ctucan_netdev_dbg(ndev, "%s\n", __func__); + + ret = pm_runtime_get_sync(priv->dev); + if (ret < 0) { + netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n", __func__, ret); + pm_runtime_put_noidle(priv->dev); + return ret; + } + + ctucan_get_rec_tec(priv, bec); + pm_runtime_put(priv->dev); + + return 0; +} + +static const struct net_device_ops ctucan_netdev_ops = { + .ndo_open = ctucan_open, + .ndo_stop = ctucan_close, + .ndo_start_xmit = ctucan_start_xmit, + .ndo_change_mtu = can_change_mtu, +}; + +int ctucan_suspend(struct device *dev) +{ + struct net_device *ndev = dev_get_drvdata(dev); + struct ctucan_priv *priv = netdev_priv(ndev); + + ctucan_netdev_dbg(ndev, "%s\n", __func__); + + if (netif_running(ndev)) { + netif_stop_queue(ndev); + netif_device_detach(ndev); + } + + priv->can.state = CAN_STATE_SLEEPING; + + return 0; +} +EXPORT_SYMBOL(ctucan_suspend); + +int ctucan_resume(struct device *dev) +{ + struct net_device *ndev = dev_get_drvdata(dev); + struct ctucan_priv *priv = netdev_priv(ndev); + + ctucan_netdev_dbg(ndev, "%s\n", __func__); + + priv->can.state = CAN_STATE_ERROR_ACTIVE; + + if (netif_running(ndev)) { + netif_device_attach(ndev); + netif_start_queue(ndev); + } + + return 0; +} +EXPORT_SYMBOL(ctucan_resume); + +int ctucan_probe_common(struct device *dev, void __iomem *addr, int irq, unsigned int ntxbufs, + unsigned long can_clk_rate, int pm_enable_call, + void (*set_drvdata_fnc)(struct device *dev, struct net_device *ndev)) +{ + struct ctucan_priv *priv; + struct net_device *ndev; + int ret; + + /* Create a CAN device instance */ + ndev = alloc_candev(sizeof(struct ctucan_priv), ntxbufs); + if (!ndev) + return -ENOMEM; + + priv = netdev_priv(ndev); + spin_lock_init(&priv->tx_lock); + INIT_LIST_HEAD(&priv->peers_on_pdev); + priv->ntxbufs = ntxbufs; + priv->dev = dev; + priv->can.bittiming_const = &ctu_can_fd_bit_timing_max; + priv->can.data_bittiming_const = &ctu_can_fd_bit_timing_data_max; + priv->can.do_set_mode = ctucan_do_set_mode; + + /* Needed for timing adjustment to be performed as soon as possible */ + priv->can.do_set_bittiming = ctucan_set_bittiming; + priv->can.do_set_data_bittiming = ctucan_set_data_bittiming; + + priv->can.do_get_berr_counter = ctucan_get_berr_counter; + priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK + | CAN_CTRLMODE_LISTENONLY + | CAN_CTRLMODE_FD + | CAN_CTRLMODE_PRESUME_ACK + | CAN_CTRLMODE_BERR_REPORTING + | CAN_CTRLMODE_FD_NON_ISO + | CAN_CTRLMODE_ONE_SHOT; + priv->mem_base = addr; + + /* Get IRQ for the device */ + ndev->irq = irq; + ndev->flags |= IFF_ECHO; /* We support local echo */ + + if (set_drvdata_fnc) + set_drvdata_fnc(dev, ndev); + SET_NETDEV_DEV(ndev, dev); + ndev->netdev_ops = &ctucan_netdev_ops; + + /* Getting the can_clk info */ + if (!can_clk_rate) { + priv->can_clk = devm_clk_get(dev, NULL); + if (IS_ERR(priv->can_clk)) { + dev_err(dev, "Device clock not found.\n"); + ret = PTR_ERR(priv->can_clk); + goto err_free; + } + can_clk_rate = clk_get_rate(priv->can_clk); + } + + priv->write_reg = ctucan_write32_le; + priv->read_reg = ctucan_read32_le; + + if (pm_enable_call) + pm_runtime_enable(dev); + ret = pm_runtime_get_sync(dev); + if (ret < 0) { + netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n", + __func__, ret); + pm_runtime_put_noidle(priv->dev); + goto err_pmdisable; + } + + /* Check for big-endianity and set according IO-accessors */ + if ((ctucan_read32(priv, CTUCANFD_DEVICE_ID) & 0xFFFF) != CTUCANFD_ID) { + priv->write_reg = ctucan_write32_be; + priv->read_reg = ctucan_read32_be; + if ((ctucan_read32(priv, CTUCANFD_DEVICE_ID) & 0xFFFF) != CTUCANFD_ID) { + netdev_err(ndev, "CTU_CAN_FD signature not found\n"); + ret = -ENODEV; + goto err_deviceoff; + } + } + + ret = ctucan_reset(ndev); + if (ret < 0) + goto err_deviceoff; + + priv->can.clock.freq = can_clk_rate; + + netif_napi_add(ndev, &priv->napi, ctucan_rx_poll, NAPI_POLL_WEIGHT); + + ret = register_candev(ndev); + if (ret) { + dev_err(dev, "fail to register failed (err=%d)\n", ret); + goto err_deviceoff; + } + + devm_can_led_init(ndev); + + pm_runtime_put(dev); + + netdev_dbg(ndev, "mem_base=0x%p irq=%d clock=%d, no. of txt buffers:%d\n", + priv->mem_base, ndev->irq, priv->can.clock.freq, priv->ntxbufs); + + return 0; + +err_deviceoff: + pm_runtime_put(priv->dev); +err_pmdisable: + if (pm_enable_call) + pm_runtime_disable(dev); +err_free: + list_del_init(&priv->peers_on_pdev); + free_candev(ndev); + return ret; +} +EXPORT_SYMBOL(ctucan_probe_common); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Martin Jerabek <martin.jerabek01@xxxxxxxxx>"); +MODULE_AUTHOR("Pavel Pisa <pisa@xxxxxxxxxxxxxxxx>"); +MODULE_AUTHOR("Ondrej Ille <ondrej.ille@xxxxxxxxx>"); +MODULE_DESCRIPTION("CTU CAN FD interface"); diff --git a/drivers/net/can/ctucanfd/ctucanfd_kframe.h b/drivers/net/can/ctucanfd/ctucanfd_kframe.h new file mode 100644 index 000000000000..3491299eaac2 --- /dev/null +++ b/drivers/net/can/ctucanfd/ctucanfd_kframe.h @@ -0,0 +1,77 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/******************************************************************************* + * + * CTU CAN FD IP Core + * + * Copyright (C) 2015-2018 Ondrej Ille <ondrej.ille@xxxxxxxxx> FEE CTU + * Copyright (C) 2018-2021 Ondrej Ille <ondrej.ille@xxxxxxxxx> self-funded + * Copyright (C) 2018-2019 Martin Jerabek <martin.jerabek01@xxxxxxxxx> FEE CTU + * Copyright (C) 2018-2021 Pavel Pisa <pisa@xxxxxxxxxxxxxxxx> FEE CTU/self-funded + * + * Project advisors: + * Jiri Novak <jnovak@xxxxxxxxxxx> + * Pavel Pisa <pisa@xxxxxxxxxxxxxxxx> + * + * Department of Measurement (http://meas.fel.cvut.cz/) + * Faculty of Electrical Engineering (http://www.fel.cvut.cz) + * Czech Technical University (http://www.cvut.cz/) + ******************************************************************************/ + +/* This file is autogenerated, DO NOT EDIT! */ + +#ifndef __CTU_CAN_FD_CAN_FD_FRAME_FORMAT__ +#define __CTU_CAN_FD_CAN_FD_FRAME_FORMAT__ + +#include <linux/bits.h> + +/* CAN_Frame_format memory map */ +enum ctu_can_fd_can_frame_format { + CTUCANFD_FRAME_FORMAT_W = 0x0, + CTUCANFD_IDENTIFIER_W = 0x4, + CTUCANFD_TIMESTAMP_L_W = 0x8, + CTUCANFD_TIMESTAMP_U_W = 0xc, + CTUCANFD_DATA_1_4_W = 0x10, + CTUCANFD_DATA_5_8_W = 0x14, + CTUCANFD_DATA_61_64_W = 0x4c, +}; + +/* CAN_FD_Frame_format memory region */ + +/* FRAME_FORMAT_W registers */ +#define REG_FRAME_FORMAT_W_DLC GENMASK(3, 0) +#define REG_FRAME_FORMAT_W_RTR BIT(5) +#define REG_FRAME_FORMAT_W_IDE BIT(6) +#define REG_FRAME_FORMAT_W_FDF BIT(7) +#define REG_FRAME_FORMAT_W_BRS BIT(9) +#define REG_FRAME_FORMAT_W_ESI_RSV BIT(10) +#define REG_FRAME_FORMAT_W_RWCNT GENMASK(15, 11) + +/* IDENTIFIER_W registers */ +#define REG_IDENTIFIER_W_IDENTIFIER_EXT GENMASK(17, 0) +#define REG_IDENTIFIER_W_IDENTIFIER_BASE GENMASK(28, 18) + +/* TIMESTAMP_L_W registers */ +#define REG_TIMESTAMP_L_W_TIME_STAMP_L_W GENMASK(31, 0) + +/* TIMESTAMP_U_W registers */ +#define REG_TIMESTAMP_U_W_TIMESTAMP_U_W GENMASK(31, 0) + +/* DATA_1_4_W registers */ +#define REG_DATA_1_4_W_DATA_1 GENMASK(7, 0) +#define REG_DATA_1_4_W_DATA_2 GENMASK(15, 8) +#define REG_DATA_1_4_W_DATA_3 GENMASK(23, 16) +#define REG_DATA_1_4_W_DATA_4 GENMASK(31, 24) + +/* DATA_5_8_W registers */ +#define REG_DATA_5_8_W_DATA_5 GENMASK(7, 0) +#define REG_DATA_5_8_W_DATA_6 GENMASK(15, 8) +#define REG_DATA_5_8_W_DATA_7 GENMASK(23, 16) +#define REG_DATA_5_8_W_DATA_8 GENMASK(31, 24) + +/* DATA_61_64_W registers */ +#define REG_DATA_61_64_W_DATA_61 GENMASK(7, 0) +#define REG_DATA_61_64_W_DATA_62 GENMASK(15, 8) +#define REG_DATA_61_64_W_DATA_63 GENMASK(23, 16) +#define REG_DATA_61_64_W_DATA_64 GENMASK(31, 24) + +#endif diff --git a/drivers/net/can/ctucanfd/ctucanfd_kregs.h b/drivers/net/can/ctucanfd/ctucanfd_kregs.h new file mode 100644 index 000000000000..edc1c1a24348 --- /dev/null +++ b/drivers/net/can/ctucanfd/ctucanfd_kregs.h @@ -0,0 +1,325 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/******************************************************************************* + * + * CTU CAN FD IP Core + * + * Copyright (C) 2015-2018 Ondrej Ille <ondrej.ille@xxxxxxxxx> FEE CTU + * Copyright (C) 2018-2021 Ondrej Ille <ondrej.ille@xxxxxxxxx> self-funded + * Copyright (C) 2018-2019 Martin Jerabek <martin.jerabek01@xxxxxxxxx> FEE CTU + * Copyright (C) 2018-2021 Pavel Pisa <pisa@xxxxxxxxxxxxxxxx> FEE CTU/self-funded + * + * Project advisors: + * Jiri Novak <jnovak@xxxxxxxxxxx> + * Pavel Pisa <pisa@xxxxxxxxxxxxxxxx> + * + * Department of Measurement (http://meas.fel.cvut.cz/) + * Faculty of Electrical Engineering (http://www.fel.cvut.cz) + * Czech Technical University (http://www.cvut.cz/) + ******************************************************************************/ + +/* This file is autogenerated, DO NOT EDIT! */ + +#ifndef __CTU_CAN_FD_CAN_FD_REGISTER_MAP__ +#define __CTU_CAN_FD_CAN_FD_REGISTER_MAP__ + +#include <linux/bits.h> + +/* CAN_Registers memory map */ +enum ctu_can_fd_can_registers { + CTUCANFD_DEVICE_ID = 0x0, + CTUCANFD_VERSION = 0x2, + CTUCANFD_MODE = 0x4, + CTUCANFD_SETTINGS = 0x6, + CTUCANFD_STATUS = 0x8, + CTUCANFD_COMMAND = 0xc, + CTUCANFD_INT_STAT = 0x10, + CTUCANFD_INT_ENA_SET = 0x14, + CTUCANFD_INT_ENA_CLR = 0x18, + CTUCANFD_INT_MASK_SET = 0x1c, + CTUCANFD_INT_MASK_CLR = 0x20, + CTUCANFD_BTR = 0x24, + CTUCANFD_BTR_FD = 0x28, + CTUCANFD_EWL = 0x2c, + CTUCANFD_ERP = 0x2d, + CTUCANFD_FAULT_STATE = 0x2e, + CTUCANFD_REC = 0x30, + CTUCANFD_TEC = 0x32, + CTUCANFD_ERR_NORM = 0x34, + CTUCANFD_ERR_FD = 0x36, + CTUCANFD_CTR_PRES = 0x38, + CTUCANFD_FILTER_A_MASK = 0x3c, + CTUCANFD_FILTER_A_VAL = 0x40, + CTUCANFD_FILTER_B_MASK = 0x44, + CTUCANFD_FILTER_B_VAL = 0x48, + CTUCANFD_FILTER_C_MASK = 0x4c, + CTUCANFD_FILTER_C_VAL = 0x50, + CTUCANFD_FILTER_RAN_LOW = 0x54, + CTUCANFD_FILTER_RAN_HIGH = 0x58, + CTUCANFD_FILTER_CONTROL = 0x5c, + CTUCANFD_FILTER_STATUS = 0x5e, + CTUCANFD_RX_MEM_INFO = 0x60, + CTUCANFD_RX_POINTERS = 0x64, + CTUCANFD_RX_STATUS = 0x68, + CTUCANFD_RX_SETTINGS = 0x6a, + CTUCANFD_RX_DATA = 0x6c, + CTUCANFD_TX_STATUS = 0x70, + CTUCANFD_TX_COMMAND = 0x74, + CTUCANFD_TX_PRIORITY = 0x78, + CTUCANFD_ERR_CAPT = 0x7c, + CTUCANFD_ALC = 0x7e, + CTUCANFD_TRV_DELAY = 0x80, + CTUCANFD_SSP_CFG = 0x82, + CTUCANFD_RX_FR_CTR = 0x84, + CTUCANFD_TX_FR_CTR = 0x88, + CTUCANFD_DEBUG_REGISTER = 0x8c, + CTUCANFD_YOLO_REG = 0x90, + CTUCANFD_TIMESTAMP_LOW = 0x94, + CTUCANFD_TIMESTAMP_HIGH = 0x98, + CTUCANFD_TXTB1_DATA_1 = 0x100, + CTUCANFD_TXTB1_DATA_2 = 0x104, + CTUCANFD_TXTB1_DATA_20 = 0x14c, + CTUCANFD_TXTB2_DATA_1 = 0x200, + CTUCANFD_TXTB2_DATA_2 = 0x204, + CTUCANFD_TXTB2_DATA_20 = 0x24c, + CTUCANFD_TXTB3_DATA_1 = 0x300, + CTUCANFD_TXTB3_DATA_2 = 0x304, + CTUCANFD_TXTB3_DATA_20 = 0x34c, + CTUCANFD_TXTB4_DATA_1 = 0x400, + CTUCANFD_TXTB4_DATA_2 = 0x404, + CTUCANFD_TXTB4_DATA_20 = 0x44c, +}; + +/* Control_registers memory region */ + +/* DEVICE_ID VERSION registers */ +#define REG_DEVICE_ID_DEVICE_ID GENMASK(15, 0) +#define REG_DEVICE_ID_VER_MINOR GENMASK(23, 16) +#define REG_DEVICE_ID_VER_MAJOR GENMASK(31, 24) + +/* MODE SETTINGS registers */ +#define REG_MODE_RST BIT(0) +#define REG_MODE_BMM BIT(1) +#define REG_MODE_STM BIT(2) +#define REG_MODE_AFM BIT(3) +#define REG_MODE_FDE BIT(4) +#define REG_MODE_ACF BIT(7) +#define REG_MODE_TSTM BIT(8) +#define REG_MODE_RTRLE BIT(16) +#define REG_MODE_RTRTH GENMASK(20, 17) +#define REG_MODE_ILBP BIT(21) +#define REG_MODE_ENA BIT(22) +#define REG_MODE_NISOFD BIT(23) +#define REG_MODE_PEX BIT(24) +#define REG_MODE_TBFBO BIT(25) +#define REG_MODE_FDRF BIT(26) + +/* STATUS registers */ +#define REG_STATUS_RXNE BIT(0) +#define REG_STATUS_DOR BIT(1) +#define REG_STATUS_TXNF BIT(2) +#define REG_STATUS_EFT BIT(3) +#define REG_STATUS_RXS BIT(4) +#define REG_STATUS_TXS BIT(5) +#define REG_STATUS_EWL BIT(6) +#define REG_STATUS_IDLE BIT(7) +#define REG_STATUS_PEXS BIT(8) + +/* COMMAND registers */ +#define REG_COMMAND_RRB BIT(2) +#define REG_COMMAND_CDO BIT(3) +#define REG_COMMAND_ERCRST BIT(4) +#define REG_COMMAND_RXFCRST BIT(5) +#define REG_COMMAND_TXFCRST BIT(6) +#define REG_COMMAND_CPEXS BIT(7) + +/* INT_STAT registers */ +#define REG_INT_STAT_RXI BIT(0) +#define REG_INT_STAT_TXI BIT(1) +#define REG_INT_STAT_EWLI BIT(2) +#define REG_INT_STAT_DOI BIT(3) +#define REG_INT_STAT_FCSI BIT(4) +#define REG_INT_STAT_ALI BIT(5) +#define REG_INT_STAT_BEI BIT(6) +#define REG_INT_STAT_OFI BIT(7) +#define REG_INT_STAT_RXFI BIT(8) +#define REG_INT_STAT_BSI BIT(9) +#define REG_INT_STAT_RBNEI BIT(10) +#define REG_INT_STAT_TXBHCI BIT(11) + +/* INT_ENA_SET registers */ +#define REG_INT_ENA_SET_INT_ENA_SET GENMASK(11, 0) + +/* INT_ENA_CLR registers */ +#define REG_INT_ENA_CLR_INT_ENA_CLR GENMASK(11, 0) + +/* INT_MASK_SET registers */ +#define REG_INT_MASK_SET_INT_MASK_SET GENMASK(11, 0) + +/* INT_MASK_CLR registers */ +#define REG_INT_MASK_CLR_INT_MASK_CLR GENMASK(11, 0) + +/* BTR registers */ +#define REG_BTR_PROP GENMASK(6, 0) +#define REG_BTR_PH1 GENMASK(12, 7) +#define REG_BTR_PH2 GENMASK(18, 13) +#define REG_BTR_BRP GENMASK(26, 19) +#define REG_BTR_SJW GENMASK(31, 27) + +/* BTR_FD registers */ +#define REG_BTR_FD_PROP_FD GENMASK(5, 0) +#define REG_BTR_FD_PH1_FD GENMASK(11, 7) +#define REG_BTR_FD_PH2_FD GENMASK(17, 13) +#define REG_BTR_FD_BRP_FD GENMASK(26, 19) +#define REG_BTR_FD_SJW_FD GENMASK(31, 27) + +/* EWL ERP FAULT_STATE registers */ +#define REG_EWL_EW_LIMIT GENMASK(7, 0) +#define REG_EWL_ERP_LIMIT GENMASK(15, 8) +#define REG_EWL_ERA BIT(16) +#define REG_EWL_ERP BIT(17) +#define REG_EWL_BOF BIT(18) + +/* REC TEC registers */ +#define REG_REC_REC_VAL GENMASK(8, 0) +#define REG_REC_TEC_VAL GENMASK(24, 16) + +/* ERR_NORM ERR_FD registers */ +#define REG_ERR_NORM_ERR_NORM_VAL GENMASK(15, 0) +#define REG_ERR_NORM_ERR_FD_VAL GENMASK(31, 16) + +/* CTR_PRES registers */ +#define REG_CTR_PRES_CTPV GENMASK(8, 0) +#define REG_CTR_PRES_PTX BIT(9) +#define REG_CTR_PRES_PRX BIT(10) +#define REG_CTR_PRES_ENORM BIT(11) +#define REG_CTR_PRES_EFD BIT(12) + +/* FILTER_A_MASK registers */ +#define REG_FILTER_A_MASK_BIT_MASK_A_VAL GENMASK(28, 0) + +/* FILTER_A_VAL registers */ +#define REG_FILTER_A_VAL_BIT_VAL_A_VAL GENMASK(28, 0) + +/* FILTER_B_MASK registers */ +#define REG_FILTER_B_MASK_BIT_MASK_B_VAL GENMASK(28, 0) + +/* FILTER_B_VAL registers */ +#define REG_FILTER_B_VAL_BIT_VAL_B_VAL GENMASK(28, 0) + +/* FILTER_C_MASK registers */ +#define REG_FILTER_C_MASK_BIT_MASK_C_VAL GENMASK(28, 0) + +/* FILTER_C_VAL registers */ +#define REG_FILTER_C_VAL_BIT_VAL_C_VAL GENMASK(28, 0) + +/* FILTER_RAN_LOW registers */ +#define REG_FILTER_RAN_LOW_BIT_RAN_LOW_VAL GENMASK(28, 0) + +/* FILTER_RAN_HIGH registers */ +#define REG_FILTER_RAN_HIGH_BIT_RAN_HIGH_VAL GENMASK(28, 0) + +/* FILTER_CONTROL FILTER_STATUS registers */ +#define REG_FILTER_CONTROL_FANB BIT(0) +#define REG_FILTER_CONTROL_FANE BIT(1) +#define REG_FILTER_CONTROL_FAFB BIT(2) +#define REG_FILTER_CONTROL_FAFE BIT(3) +#define REG_FILTER_CONTROL_FBNB BIT(4) +#define REG_FILTER_CONTROL_FBNE BIT(5) +#define REG_FILTER_CONTROL_FBFB BIT(6) +#define REG_FILTER_CONTROL_FBFE BIT(7) +#define REG_FILTER_CONTROL_FCNB BIT(8) +#define REG_FILTER_CONTROL_FCNE BIT(9) +#define REG_FILTER_CONTROL_FCFB BIT(10) +#define REG_FILTER_CONTROL_FCFE BIT(11) +#define REG_FILTER_CONTROL_FRNB BIT(12) +#define REG_FILTER_CONTROL_FRNE BIT(13) +#define REG_FILTER_CONTROL_FRFB BIT(14) +#define REG_FILTER_CONTROL_FRFE BIT(15) +#define REG_FILTER_CONTROL_SFA BIT(16) +#define REG_FILTER_CONTROL_SFB BIT(17) +#define REG_FILTER_CONTROL_SFC BIT(18) +#define REG_FILTER_CONTROL_SFR BIT(19) + +/* RX_MEM_INFO registers */ +#define REG_RX_MEM_INFO_RX_BUFF_SIZE GENMASK(12, 0) +#define REG_RX_MEM_INFO_RX_MEM_FREE GENMASK(28, 16) + +/* RX_POINTERS registers */ +#define REG_RX_POINTERS_RX_WPP GENMASK(11, 0) +#define REG_RX_POINTERS_RX_RPP GENMASK(27, 16) + +/* RX_STATUS RX_SETTINGS registers */ +#define REG_RX_STATUS_RXE BIT(0) +#define REG_RX_STATUS_RXF BIT(1) +#define REG_RX_STATUS_RXMOF BIT(2) +#define REG_RX_STATUS_RXFRC GENMASK(14, 4) +#define REG_RX_STATUS_RTSOP BIT(16) + +/* RX_DATA registers */ +#define REG_RX_DATA_RX_DATA GENMASK(31, 0) + +/* TX_STATUS registers */ +#define REG_TX_STATUS_TX1S GENMASK(3, 0) +#define REG_TX_STATUS_TX2S GENMASK(7, 4) +#define REG_TX_STATUS_TX3S GENMASK(11, 8) +#define REG_TX_STATUS_TX4S GENMASK(15, 12) + +/* TX_COMMAND registers */ +#define REG_TX_COMMAND_TXCE BIT(0) +#define REG_TX_COMMAND_TXCR BIT(1) +#define REG_TX_COMMAND_TXCA BIT(2) +#define REG_TX_COMMAND_TXB1 BIT(8) +#define REG_TX_COMMAND_TXB2 BIT(9) +#define REG_TX_COMMAND_TXB3 BIT(10) +#define REG_TX_COMMAND_TXB4 BIT(11) + +/* TX_PRIORITY registers */ +#define REG_TX_PRIORITY_TXT1P GENMASK(2, 0) +#define REG_TX_PRIORITY_TXT2P GENMASK(6, 4) +#define REG_TX_PRIORITY_TXT3P GENMASK(10, 8) +#define REG_TX_PRIORITY_TXT4P GENMASK(14, 12) + +/* ERR_CAPT ALC registers */ +#define REG_ERR_CAPT_ERR_POS GENMASK(4, 0) +#define REG_ERR_CAPT_ERR_TYPE GENMASK(7, 5) +#define REG_ERR_CAPT_ALC_BIT GENMASK(20, 16) +#define REG_ERR_CAPT_ALC_ID_FIELD GENMASK(23, 21) + +/* TRV_DELAY SSP_CFG registers */ +#define REG_TRV_DELAY_TRV_DELAY_VALUE GENMASK(6, 0) +#define REG_TRV_DELAY_SSP_OFFSET GENMASK(23, 16) +#define REG_TRV_DELAY_SSP_SRC GENMASK(25, 24) + +/* RX_FR_CTR registers */ +#define REG_RX_FR_CTR_RX_FR_CTR_VAL GENMASK(31, 0) + +/* TX_FR_CTR registers */ +#define REG_TX_FR_CTR_TX_FR_CTR_VAL GENMASK(31, 0) + +/* DEBUG_REGISTER registers */ +#define REG_DEBUG_REGISTER_STUFF_COUNT GENMASK(2, 0) +#define REG_DEBUG_REGISTER_DESTUFF_COUNT GENMASK(5, 3) +#define REG_DEBUG_REGISTER_PC_ARB BIT(6) +#define REG_DEBUG_REGISTER_PC_CON BIT(7) +#define REG_DEBUG_REGISTER_PC_DAT BIT(8) +#define REG_DEBUG_REGISTER_PC_STC BIT(9) +#define REG_DEBUG_REGISTER_PC_CRC BIT(10) +#define REG_DEBUG_REGISTER_PC_CRCD BIT(11) +#define REG_DEBUG_REGISTER_PC_ACK BIT(12) +#define REG_DEBUG_REGISTER_PC_ACKD BIT(13) +#define REG_DEBUG_REGISTER_PC_EOF BIT(14) +#define REG_DEBUG_REGISTER_PC_INT BIT(15) +#define REG_DEBUG_REGISTER_PC_SUSP BIT(16) +#define REG_DEBUG_REGISTER_PC_OVR BIT(17) +#define REG_DEBUG_REGISTER_PC_SOF BIT(18) + +/* YOLO_REG registers */ +#define REG_YOLO_REG_YOLO_VAL GENMASK(31, 0) + +/* TIMESTAMP_LOW registers */ +#define REG_TIMESTAMP_LOW_TIMESTAMP_LOW GENMASK(31, 0) + +/* TIMESTAMP_HIGH registers */ +#define REG_TIMESTAMP_HIGH_TIMESTAMP_HIGH GENMASK(31, 0) + +#endif -- 2.35.1
