Linux ARM MSM

• Thread Index

• [PATCH v2 02/15] pinctrl: qcom-pmic-gpio: add support for PM8937
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v2 01/15] dt-bindings: pinctrl: qcom,pmic-gpio: add PM8937
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v2 13/15] arm64: dts: qcom: Add initial support for MSM8917
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v2 15/15] arm64: dts: qcom: Add Xiaomi Redmi 5A
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v2 07/15] pinctrl: qcom: Add MSM8917 tlmm pinctrl driver
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v2 14/15] dt-bindings: arm: qcom: Add Xiaomi Redmi 5A
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v2 11/15] dt-bindings: iommu: qcom,iommu: Add MSM8917 IOMMU to SMMUv1 compatibles
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v2 12/15] dt-bindings: nvmem: Add compatible for MS8917
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v2 10/15] thermal/drivers/qcom/tsens-v1: Add support for MSM8937 tsens
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v2 09/15] dt-bindings: thermal: tsens: Add MSM8937 compatible
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v2 05/15] arm64: dts: qcom: Add PM8937 PMIC
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v2 08/15] dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8917
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v2 06/15] dt-bindings: pinctrl: qcom: Add MSM8917 pinctrl bindings
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• Re: [PATCH v4 4/4] clk: qcom: gcc: Add support for QCS615 GCC clocks
  • From: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
• Re: [PATCH v29 04/33] xhci: sideband: add initial api to register a sideband entity
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v6 2/5] dt-bindings: media: camss: Add qcom,sdm670-camss
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• Re: [PATCH v6 2/5] dt-bindings: media: camss: Add qcom,sdm670-camss
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC PATCH v2 1/5] dt-bindings: net: wireless: ath12k: describe WSI properties for QCN9274
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [PATCH v16 3/5] iommu/arm-smmu: add support for PRR bit setup
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• Re: [PATCH V4 2/4] dt-bindings: iio: adc: Add support for QCOM PMIC5 Gen3 ADC
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH V4 1/4] dt-bindings: iio/adc: Move QCOM ADC bindings to iio/adc folder
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v6 7/9] drm/msm/dpu: add support for virtual planes
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [RFC PATCH v2 1/5] dt-bindings: net: wireless: ath12k: describe WSI properties for QCN9274
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• [PATCH V4 4/4] thermal: qcom: add support for PMIC5 Gen3 ADC thermal monitoring
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• [PATCH V4 3/4] iio: adc: Add support for QCOM PMIC5 Gen3 ADC
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• [PATCH V4 2/4] dt-bindings: iio: adc: Add support for QCOM PMIC5 Gen3 ADC
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• [PATCH V4 1/4] dt-bindings: iio/adc: Move QCOM ADC bindings to iio/adc folder
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• [PATCH V4 0/4] Add support for QCOM SPMI PMIC5 Gen3 ADC
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• [PATCH v8 3/3] gcc-sdm845: Add general purpose clock ops
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH v8 2/3] clk: qcom: clk-rcg2: split __clk_rcg2_configure function
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH v8 1/3] clk: qcom: clk-rcg2: document calc_rate function
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH v8 0/3] Add divisor computation feature for sdm845 gp clocks
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• Re: [PATCH v6 2/5] dt-bindings: media: camss: Add qcom,sdm670-camss
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v1 1/1] arm64: dts: qcom: x1e80100-dell-xps13-9345: Introduce retimer support
  • From: Aleksandrs Vinarskis <alex.vinarskis@xxxxxxxxx>
• [PATCH v1 0/1] X1E Dell XPS 9345 Improvements 2
  • From: Aleksandrs Vinarskis <alex.vinarskis@xxxxxxxxx>
• Re: [PATCH 11/11] arm64: defconfig: Enable QCS615 clock controllers
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH 10/11] clk: qcom: videocc-qcs615: Add QCS615 video clock controller driver
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH 08/11] clk: qcom: gpucc-qcs615: Add QCS615 graphics clock controller driver
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH 06/11] clk: qcom: dispcc-qcs615: Add QCS615 display clock controller driver
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH 04/11] clk: qcom: camcc-qcs615: Add QCS615 camera clock controller driver
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH 04/11] clk: qcom: camcc-qcs615: Add QCS615 camera clock controller driver
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH 03/11] dt-bindings: clock: Add Qualcomm QCS615 Camera clock controller
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH 02/11] clk: qcom: clk-alpha-pll: Add support for dynamic update for slewing PLLs
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH v6 0/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for Windows Dev Kit 2023
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v5 0/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for Windows Dev Kit 2023
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH V3 0/3] X1E001DE Snapdragon Devkit for Windows
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• Re: [PATCH v16 3/5] iommu/arm-smmu: add support for PRR bit setup
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH V5 3/6] firmware: arm_scmi: Report duplicate opps as firmware bugs
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH V5 0/6] firmware: arm_scmi: Misc Fixes
  • From: Cristian Marussi <cristian.marussi@xxxxxxx>
• Re: [PATCH V5 0/6] firmware: arm_scmi: Misc Fixes
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH V1 2/3] arm64: dts: qcom: x1e001de-devkit: Enable SD card support
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• Re: [PATCH v16 3/5] iommu/arm-smmu: add support for PRR bit setup
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH V6 1/1] cpufreq: scmi: Register for limit change notifications
  • From: Vincent Guittot <vincent.guittot@xxxxxxxxxx>
• Re: [PATCH V5 3/6] firmware: arm_scmi: Report duplicate opps as firmware bugs
  • From: Cristian Marussi <cristian.marussi@xxxxxxx>
• Re: [PATCH v6 2/5] dt-bindings: media: camss: Add qcom,sdm670-camss
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• Re: [PATCH v6 2/5] dt-bindings: media: camss: Add qcom,sdm670-camss
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• Re: [PATCH v3 2/4] arm64: dts: qcom: ipq6018: add 1.5GHz CPU Frequency
  • From: Chukun Pan <amadeus@xxxxxxxxxx>
• 答复: [PATCH v3] usb: typec: qcom-pmic: init value of hdr_len/txbuf_len earlier
  • From: Rex Nie <rex.nie@xxxxxxxxxxxxxxx>
• [PATCH v4] usb: typec: qcom-pmic: init value of hdr_len/txbuf_len earlier
  • From: Rex Nie <rex.nie@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] arm64: dts: qcom: ipq6018: add 1.2GHz CPU Frequency
  • From: Chukun Pan <amadeus@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: arm: qcom-soc: extend to support SAR2130P platform
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH V6 0/1] firmware: arm_scmi: Register and handle limits change notification
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V6 1/1] cpufreq: scmi: Register for limit change notifications
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [PATCH v3] usb: typec: qcom-pmic: init value of hdr_len/txbuf_len earlier
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v16 3/5] iommu/arm-smmu: add support for PRR bit setup
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• [PATCH V7 2/2] arm64: dts: qcom: x1e80100: Enable cpufreq
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V7 1/2] arm64: dts: qcom: x1e80100: Add cpucp mailbox and sram nodes
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V7 0/2] qcom: x1e80100: Enable CPUFreq
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V5 6/6] mailbox: qcom-cpucp: Mark the irq with IRQF_NO_SUSPEND flag
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V5 5/6] pmdomain: arm: Use FLAG_DEV_NAME_FW to ensure unique names
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V5 4/6] pmdomain: core: Add GENPD_FLAG_DEV_NAME_FW flag
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V5 3/6] firmware: arm_scmi: Report duplicate opps as firmware bugs
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V5 2/6] firmware: arm_scmi: Skip opp duplicates
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V5 1/6] firmware: arm_scmi: Ensure that the message-id supports fastchannel
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V5 0/6] firmware: arm_scmi: Misc Fixes
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [PATCH V4 3/4] pmdomain: core: Fix debugfs node creation failure
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [PATCH V4 3/4] pmdomain: core: Fix debugfs node creation failure
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [PATCH v3] usb: typec: qcom-pmic: init value of hdr_len/txbuf_len earlier
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v13 6/8] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v13 8/8] arm64: dts: qcom: ipq9574: Remove eMMC node
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v13 7/8] arm64: dts: qcom: ipq9574: Add SPI nand support
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v13 4/8] mtd: nand: Add qpic_common API file
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v13 5/8] mtd: rawnand: qcom: use FIELD_PREP and GENMASK
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v13 3/8] mtd: rawnand: qcom: Add qcom prefix to common api
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v13 2/8] mtd: rawnand: qcom: cleanup qcom_nandc driver
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v13 0/8] Add QPIC SPI NAND driver
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v13 1/8] spi: dt-bindings: Introduce qcom,spi-qpic-snand
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v2 3/4] arm64: dts: qcom: sar2130p: add support for SAR2130P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 4/4] arm64: dts: qcom: sar2130p: add QAR2130P board file
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 2/4] dt-bindings: arm: qcom: add QAR2130P board
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: arm: qcom-soc: extend to support SAR2130P platform
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 0/4] arm64: dts: qcom: add QAR2130P support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v6 0/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for Windows Dev Kit 2023
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: clock: qcom: Add GPU clocks for QCS8300
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/2] cpuidle: qcom-spm: fix platform device release in spm_cpuidle_register
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v16 1/5] iommu/arm-smmu: re-enable context caching in smmu reset operation
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• Re: [PATCH 1/2] cpuidle: qcom-spm: fix device node release in spm_cpuidle_register
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 6/6] arm64: dts: qcom: qcs6490-rb3gen2-vision-mezzanine: Add vision mezzanine
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: clock: qcom: Add GPU clocks for QCS8300
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 4/6] media: qcom: camss: Restructure camss_link_entities
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• Re: [PATCH v4 3/6] media: qcom: camss: Add support for camss driver on SC7280
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• Re: [PATCH v4 1/6] media: dt-bindings: media: camss: Add qcom,sc7280-camss binding
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• Re: [PATCH v2 3/6] dt-bindings: clock: qcom: Add CAMCC clocks for QCS8300
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• [PATCH v6 3/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for WDK2023
  • From: Jens Glathe via B4 Relay <devnull+jens.glathe.oldschoolsolutions.biz@xxxxxxxxxx>
• [PATCH v6 1/3] dt-bindings: arm: qcom: Add Microsoft Windows Dev Kit 2023
  • From: Jens Glathe via B4 Relay <devnull+jens.glathe.oldschoolsolutions.biz@xxxxxxxxxx>
• [PATCH v6 2/3] firmware: qcom: scm: Allow QSEECOM for Windows Dev Kit 2023
  • From: Jens Glathe via B4 Relay <devnull+jens.glathe.oldschoolsolutions.biz@xxxxxxxxxx>
• [PATCH v6 0/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for Windows Dev Kit 2023
  • From: Jens Glathe via B4 Relay <devnull+jens.glathe.oldschoolsolutions.biz@xxxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: clock: qcom: Add GPU clocks for QCS8300
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• [PATCH v4 4/6] media: qcom: camss: Restructure camss_link_entities
  • From: Vikram Sharma <quic_vikramsa@xxxxxxxxxxx>
• [PATCH v4 3/6] media: qcom: camss: Add support for camss driver on SC7280
  • From: Vikram Sharma <quic_vikramsa@xxxxxxxxxxx>
• [PATCH v4 6/6] arm64: dts: qcom: qcs6490-rb3gen2-vision-mezzanine: Add vision mezzanine
  • From: Vikram Sharma <quic_vikramsa@xxxxxxxxxxx>
• [PATCH v4 5/6] arm64: dts: qcom: sc7280: Add support for camss
  • From: Vikram Sharma <quic_vikramsa@xxxxxxxxxxx>
• [PATCH v4 2/6] media: qcom: camss: Sort CAMSS version enums and compatible strings
  • From: Vikram Sharma <quic_vikramsa@xxxxxxxxxxx>
• [PATCH v4 1/6] media: dt-bindings: media: camss: Add qcom,sc7280-camss binding
  • From: Vikram Sharma <quic_vikramsa@xxxxxxxxxxx>
• [PATCH v4 0/6] media: qcom: camss: Add sc7280 support
  • From: Vikram Sharma <quic_vikramsa@xxxxxxxxxxx>
• Re: [PATCH v2 -next] i2c: qcom-cci: Remove the unused variable cci_clk_rate
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• Re: [PATCH v6 7/9] drm/msm/dpu: add support for virtual planes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• 答复: [PATCH v2] usb: typec: qcom-pmic: init value of hdr_len/txbuf_len earlier
  • From: Rex Nie <rex.nie@xxxxxxxxxxxxxxx>
• [PATCH v3] usb: typec: qcom-pmic: init value of hdr_len/txbuf_len earlier
  • From: Rex Nie <rex.nie@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] arm64: dts: qcom: qcs615-ride: Enable PMIC peripherals
  • From: Tingguo Cheng <quic_tingguoc@xxxxxxxxxxx>
• Re: [PATCH v2 3/6] dt-bindings: clock: qcom: Add CAMCC clocks for QCS8300
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: clock: qcom: Add GPU clocks for QCS8300
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: clock: qcom: Add GPU clocks for QCS8300
  • From: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
• Re: [PATCH v6 8/9] drm/msm/dpu: allow using two SSPP blocks for a single plane
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH V5 1/1] cpufreq: scmi: Register for limit change notifications
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• [PATCH v5 3/4] coresight: Add support for trace filtering by source
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v5 4/4] coresight-tpda: Optimize the function of reading element size
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v5 2/4] coresight: Add a helper to check if a device is source
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v5 1/4] dt-bindings: arm: qcom,coresight-static-replicator: Add property for source filtering
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v5 0/4] source filtering for multi-port output
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [PATCH V5 1/1] cpufreq: scmi: Register for limit change notifications
  • From: Cristian Marussi <cristian.marussi@xxxxxxx>
• Re: [PATCH v3 3/4] arm64: dts: qcom: qcs615: add the SCM node
  • From: Qingqing Zhou <quic_qqzhou@xxxxxxxxxxx>
• Re: [PATCH v2] usb: typec: qcom-pmic: init value of hdr_len/txbuf_len earlier
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 RESEND 1/3] coresight-tpdm: Add MCMB dataset support
  • From: Jinlong Mao <quic_jinlmao@xxxxxxxxxxx>
• Re: [PATCH v2] soc: qcom: Rework BCM_TCS_CMD macro
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxx>
• Re: [PATCH v3 4/4] arm64: dts: qcom: qcs615: add the APPS SMMU node
  • From: Qingqing Zhou <quic_qqzhou@xxxxxxxxxxx>
• Re: [PATCH v5 3/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for WDK2023
  • From: Jens Glathe <jens.glathe@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 6/7] PCI: qcom: Disable ASPM L0s and remove BDF2SID mapping config for X1E80100 SoC
  • From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
• Re: [PATCH v7 6/7] PCI: qcom: Disable ASPM L0s and remove BDF2SID mapping config for X1E80100 SoC
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v5 1/3] dt-bindings: arm: qcom: Add Microsoft Windows Dev Kit 2023
  • From: Jens Glathe <jens.glathe@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 3/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for WDK2023
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: clock: qcom: Add GPU clocks for QCS8300
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v5 1/3] dt-bindings: arm: qcom: Add Microsoft Windows Dev Kit 2023
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v7 6/7] PCI: qcom: Disable ASPM L0s and remove BDF2SID mapping config for X1E80100 SoC
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v7 6/7] PCI: qcom: Disable ASPM L0s and remove BDF2SID mapping config for X1E80100 SoC
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH v5 1/3] dt-bindings: arm: qcom: Add Microsoft Windows Dev Kit 2023
  • From: Jens Glathe via B4 Relay <devnull+jens.glathe.oldschoolsolutions.biz@xxxxxxxxxx>
• [PATCH v5 0/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for Windows Dev Kit 2023
  • From: Jens Glathe via B4 Relay <devnull+jens.glathe.oldschoolsolutions.biz@xxxxxxxxxx>
• [PATCH v5 3/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for WDK2023
  • From: Jens Glathe via B4 Relay <devnull+jens.glathe.oldschoolsolutions.biz@xxxxxxxxxx>
• [PATCH v5 2/3] firmware: qcom: scm: Allow QSEECOM for Windows Dev Kit 2023
  • From: Jens Glathe via B4 Relay <devnull+jens.glathe.oldschoolsolutions.biz@xxxxxxxxxx>
• [PATCH v3 2/2] arm64: dts: qcom: sa8775p-ride: Enable Adreno 663 GPU
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• [PATCH v3 1/2] arm64: dts: qcom: sa8775p: Add gpu and gmu nodes
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• [PATCH v3 0/2] DRM/MSM: Support for Adreno 663 GPU
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: clock: qcom: Add GPU clocks for QCS8300
  • From: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
• Re: [PATCH V2 3/3] interconnect: qcom: Add EPSS L3 support on SA8775P
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• Re: [PATCH V2 1/3] dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• [PATCH 2/2] cpuidle: qcom-spm: fix platform device release in spm_cpuidle_register
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 1/2] cpuidle: qcom-spm: fix device node release in spm_cpuidle_register
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 0/2] cpuidle: qcom-spm: fix resource release in spm_cpuidle_register
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH v7 6/7] PCI: qcom: Disable ASPM L0s and remove BDF2SID mapping config for X1E80100 SoC
  • From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
• Re: [PATCH v2 1/4] ASoC: dt-bindings: wcd937x-sdw: Add static channel mapping support
  • From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
• [PATCH] soc: qcom: ice: Remove the device_link field in qcom_ice
  • From: Joe Hattori <joe@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2] usb: typec: qcom-pmic: init value of hdr_len/txbuf_len earlier
  • From: Rex Nie <rex.nie@xxxxxxxxxxxxxxx>
• Re: [PATCH V2 3/3] scsi: ufs: qcom: Add support for multiple ICE allocators
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2] soc: qcom: Rework BCM_TCS_CMD macro
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH] remoteproc: qcom: pas: Make remoteproc name human friendly
  • From: Chris Lew <quic_clew@xxxxxxxxxxx>
• Re: [PATCH] soc: Switch back to struct platform_driver::remove()
  • From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
• [PATCH net-next] net: phy: use ethtool string helpers
  • From: Rosen Penev <rosenp@xxxxxxxxx>
• Re: [PATCH v6 8/9] drm/msm/dpu: allow using two SSPP blocks for a single plane
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v6 7/9] drm/msm/dpu: add support for virtual planes
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 0/2] iommu/arm-smmu-qcom: Add SDM670 SMMU v2
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• Re: [PATCH v6 6/9] drm/msm/dpu: move rot90 checking to dpu_plane_atomic_check_sspp()
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v6 2/9] drm/msm/dpu: move pstate->pipe initialization to dpu_plane_atomic_check
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v2 2/3] drm/msm/dp: rename edp_ bridge functions and struct
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH v2 1/3] drm/msm/dp: prefix all symbols with msm_dp_
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 3/3] drm/msm/dp: tidy up platform data names
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 2/3] drm/msm/dp: rename edp_ bridge functions and struct
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 0/3] drm/msm/dp: mass-rename symbols
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/3] drm/msm/dp: rename edp_ bridge functions and struct
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 3/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for WDK2023
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• [PATCH v2] drm/msm/dpu: cast crtc_clk calculation to u64 in _dpu_core_perf_calc_clk()
  • From: Gax-c <zichenxie0106@xxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: Cast an operand to u64 to prevent potential overflow in _dpu_core_perf_calc_clk()
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v29 04/33] xhci: sideband: add initial api to register a sideband entity
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH 3/3] drm/msm/dp: tidy up platform data names
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 2/3] drm/msm/dp: rename edp_ bridge functions and struct
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 1/3] drm/msm/dp: prefix all symbols with msm_dp_
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [RFC PATCH v2 5/5] arm64: dts: qcom: ipq9574: Add WiFi nodes for RDP433
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [RFC PATCH v2 1/5] dt-bindings: net: wireless: ath12k: describe WSI properties for QCN9274
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH] dt-bindings: arm: qcom: add missing elements to the SoC list
  • From: Gabor Juhos <j4g8y7@xxxxxxxxx>
• [RFC PATCH v2 5/5] arm64: dts: qcom: ipq9574: Add WiFi nodes for RDP433
  • From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
• [RFC PATCH v2 4/5] wifi: ath12k: assign unique hardware link IDs during QMI host cap
  • From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
• [RFC PATCH v2 3/5] wifi: ath12k: Send partner device details in QMI MLO capability
  • From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
• [RFC PATCH v2 2/5] wifi: ath12k: parse multiple device information from device tree
  • From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
• [RFC PATCH v2 1/5] dt-bindings: net: wireless: ath12k: describe WSI properties for QCN9274
  • From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
• [RFC PATCH v2 0/5] wifi: ath12k: Add WSI node for QCN9274 in RDP433 for MLO
  • From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
• [PATCH] drm/msm/dpu: Cast an operand to u64 to prevent potential overflow in _dpu_core_perf_calc_clk()
  • From: Gax-c <zichenxie0106@xxxxxxxxx>
• Re: [PATCH v3 0/4] Add support for APPS SMMU on QCS615
  • From: Will Deacon <will@xxxxxxxxxx>
• Re: [PATCH] usb: typec: qcom-pmic: fix uninitialized value hdr_len and txbuf_len
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH] soc: Switch back to struct platform_driver::remove()
  • From: "Gabriel L. Somlo" <gsomlo@xxxxxxxxx>
• Re: [PATCH] usb: typec: qcom-pmic: fix uninitialized value hdr_len and txbuf_len
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] soc: Switch back to struct platform_driver::remove()
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2 -next] i2c: qcom-cci: Remove the unused variable cci_clk_rate
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 4/4] arm64: dts: qcom: Add CMN PLL node for IPQ9574 SoC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] um: Remove double zero check
  • From: "Alexey Klimov" <alexey.klimov@xxxxxxxxxx>
• Re: [PATCH v16 5/5] iommu/arm-smmu: add ACTLR data and support for qcom_smmu_500
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH v5 4/4] arm64: dts: qcom: Add CMN PLL node for IPQ9574 SoC
  • From: Jie Luo <quic_luoj@xxxxxxxxxxx>
• Re: [PATCH v16 3/5] iommu/arm-smmu: add support for PRR bit setup
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH v16 1/5] iommu/arm-smmu: re-enable context caching in smmu reset operation
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH v2] soc: qcom: Rework BCM_TCS_CMD macro
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxx>
• Re: [PATCH v3 2/2] arm64: dts: qcom: qcs615-ride: Enable PMIC peripherals
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 09/10] clocksource/drivers/qcom: Remove clockevents shutdown call on offlining
  • From: Frederic Weisbecker <frederic@xxxxxxxxxx>
• Re: [PATCH v16 1/5] iommu/arm-smmu: re-enable context caching in smmu reset operation
  • From: Will Deacon <will@xxxxxxxxxx>
• Re: [PATCH 0/3] arm64: dts: qcom: add QAR2130P support
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v4 0/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for Windows Dev Kit 2023
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v16 5/5] iommu/arm-smmu: add ACTLR data and support for qcom_smmu_500
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• [PATCH] um: Remove double zero check
  • From: Shaojie Dong <quic_shaojied@xxxxxxxxxxx>
• Re: [PATCH v4 16/16] net: stmmac: dwmac-s32: Read PTP clock rate when ready
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v4 15/16] MAINTAINERS: Add Jan Petrous as the NXP S32G/R DWMAC driver maintainer
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v4 14/16] net: stmmac: dwmac-s32: add basic NXP S32G/S32R glue driver
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH V2 2/3] arm64: dts: qcom: sm8650: Add ICE allocator entries
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH V2 1/3] dt-bindings: ufs: qcom: Document ice configuration table
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 12/16] net: dwmac-sti: Use helper rgmii_clock
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v4 11/16] net: xgene_enet: Use helper rgmii_clock
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v4 10/16] net: macb: Use helper rgmii_clock
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v4 09/16] net: dwmac-starfive: Use helper rgmii_clock
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v4 08/16] net: dwmac-rk: Use helper rgmii_clock
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v4 07/16] net: dwmac-intel-plat: Use helper rgmii_clock
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v4 06/16] net: dwmac-imx: Use helper rgmii_clock
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v4 05/16] net: dwmac-dwc-qos-eth: Use helper rgmii_clock
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v4 04/16] net: phy: Add helper for mapping RGMII link speed to clock rate
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH V2 3/3] scsi: ufs: qcom: Add support for multiple ICE allocators
  • From: Ram Kumar Dwivedi <quic_rdwivedi@xxxxxxxxxxx>
• [PATCH V2 1/3] dt-bindings: ufs: qcom: Document ice configuration table
  • From: Ram Kumar Dwivedi <quic_rdwivedi@xxxxxxxxxxx>
• [PATCH V2 0/3] Add support for multiple ICE allocators
  • From: Ram Kumar Dwivedi <quic_rdwivedi@xxxxxxxxxxx>
• [PATCH V2 2/3] arm64: dts: qcom: sm8650: Add ICE allocator entries
  • From: Ram Kumar Dwivedi <quic_rdwivedi@xxxxxxxxxxx>
• Re: [PATCH V1 2/3] arm64: dts: qcom: sm8650: Add ICE algorithm entries
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH V1 3/3] scsi: ufs: qcom: Add support for multiple ICE algorithms
  • From: Ram Kumar Dwivedi <quic_rdwivedi@xxxxxxxxxxx>
• Re: [PATCH V1 1/3] dt-bindings: ufs: qcom: Document ice configuration table
  • From: Ram Kumar Dwivedi <quic_rdwivedi@xxxxxxxxxxx>
• Re: [PATCH v2 1/3] dm-inlinecrypt: Add inline encryption support
  • From: Mikulas Patocka <mpatocka@xxxxxxxxxx>
• Re: [PATCH V1 2/3] arm64: dts: qcom: sm8650: Add ICE algorithm entries
  • From: Ram Kumar Dwivedi <quic_rdwivedi@xxxxxxxxxxx>
• Re: [PATCH V1 1/3] dt-bindings: ufs: qcom: Document ice configuration table
  • From: Ram Kumar Dwivedi <quic_rdwivedi@xxxxxxxxxxx>
• Re: [PATCH v2 0/2] drm/ci: add new devices for testing
  • From: Helen Mae Koike Fornazier <helen.koike@xxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcs615: Add LLCC support for QCS615
  • From: Song Xue <quic_songxue@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] drm/ci: add sm8350-hdk
  • From: Helen Mae Koike Fornazier <helen.koike@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] drm/ci: add dedede
  • From: Helen Mae Koike Fornazier <helen.koike@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: clock: qcom: Add GPU clocks for QCS8300
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v8 6/7] arm64: dts: qcom: ipq9574: Add nsscc node
  • From: Philip Li <philip.li@xxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: clock: qcom: Add GPU clocks for QCS8300
  • From: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
• Re: [PATCH] soc: Switch back to struct platform_driver::remove()
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• Re: [PATCH v2 11/11] clk: qcom: add SAR2130P GPU Clock Controller support
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH] soc: Switch back to struct platform_driver::remove()
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH v2] arm64: dts: x1e80100-crd: describe HID supplies
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH] soc: Switch back to struct platform_driver::remove()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH v1 1/3] dt-bindings: watchdog: Document Qualcomm QCS8300
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 14/16] net: stmmac: dwmac-s32: add basic NXP S32G/S32R glue driver
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 13/16] dt-bindings: net: Add DT bindings for DWMAC on NXP S32G/R SoCs
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• 答复: [PATCH] usb: typec: qcom-pmic: fix uninitialized value hdr_len and txbuf_len
  • From: Rex Nie <rex.nie@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
  • From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
• Re: [PATCH v12 4/8] mtd: nand: Add qpic_common API file
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• Re: [PATCH v12 6/8] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v1 1/3] dt-bindings: watchdog: Document Qualcomm QCS8300
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• [PATCH v1 3/3] arm64: dts: qcom: qcs8300-ride: Add watchdog node
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• [PATCH v1 0/3] Enable Watchdog on QCS8300
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• [PATCH v1 2/3] arm64: dts: qcom: qcs8300: Add watchdog node
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• [PATCH v3 2/2] dt-bindings: net: qcom,ethqos: add description for qcs8300
  • From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: net: qcom,ethqos: add description for qcs615
  • From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
• [PATCH v3 0/2] Add ethernet dts schema for qcs615/qcs8300
  • From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: Add coresight nodes for QCS8300
  • From: Jie Gan <quic_jiegan@xxxxxxxxxxx>
• Re: [PATCH v6 0/5] Coresight: Add Coresight TMC Control Unit driver
  • From: Jie Gan <quic_jiegan@xxxxxxxxxxx>
• Re: [PATCH] usb: typec: qcom-pmic: fix uninitialized value hdr_len and txbuf_len
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: typec: qcom-pmic: fix uninitialized value hdr_len and txbuf_len
  • From: Rex Nie <rex.nie@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] arm64: dts: qcom: qcs615-ride: Enable PMIC peripherals
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] Add ethernet dts schema for qcs615/qcs8300
  • From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
• [PATCH v2 -next] i2c: qcom-cci: Remove the unused variable cci_clk_rate
  • From: Jiapeng Chong <jiapeng.chong@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 1/3] clk: qcom: clk-rcg2: document calc_rate function
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• [PATCH v10 4/4] drm/msm: Extend gpu devcore dumps with pgtbl info
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH v10 3/4] iommu/io-pgtable-arm: Add way to debug pgtable walk
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH v10 2/4] iommu/io-pgtable-arm: Re-use the pgtable walk for iova_to_phys
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH v10 1/4] iommu/io-pgtable-arm: Make pgtable walker more generic
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH v10 0/4] io-pgtable-arm + drm/msm: Extend iova fault debugging
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v9 0/4] io-pgtable-arm + drm/msm: Extend iova fault debugging
  • From: Rob Clark <robdclark@xxxxxxxxxxxx>
• Re: [PATCH v2 4/5] clk: qcom: dispcc-qcm2290: remove alpha values from disp_cc_pll0_config
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/5] clk: qcom: apss-ipq-pll: drop 'alpha_en_mask' from IPQ5018 PLL config
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/2] pinctrl: qcom: Add sm8750 pinctrl driver
  • From: Melody Olvera <quic_molvera@xxxxxxxxxxx>
• Re: [PATCH v16 5/5] iommu/arm-smmu: add ACTLR data and support for qcom_smmu_500
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v7 4/5] arm64: dts: qcom: Add PSCI SYSTEM_RESET2 types for qcm6490-idp
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxxxx>
• Re: [PATCH v16 4/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v16 3/5] iommu/arm-smmu: add support for PRR bit setup
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v16 2/5] iommu/arm-smmu: refactor qcom_smmu structure to include single pointer
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v16 1/5] iommu/arm-smmu: re-enable context caching in smmu reset operation
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH v4 16/16] net: stmmac: dwmac-s32: Read PTP clock rate when ready
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• [PATCH v4 15/16] MAINTAINERS: Add Jan Petrous as the NXP S32G/R DWMAC driver maintainer
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• [PATCH v4 12/16] net: dwmac-sti: Use helper rgmii_clock
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• [PATCH v4 13/16] dt-bindings: net: Add DT bindings for DWMAC on NXP S32G/R SoCs
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• [PATCH v4 14/16] net: stmmac: dwmac-s32: add basic NXP S32G/S32R glue driver
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• [PATCH v4 07/16] net: dwmac-intel-plat: Use helper rgmii_clock
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• [PATCH v4 09/16] net: dwmac-starfive: Use helper rgmii_clock
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• [PATCH v4 10/16] net: macb: Use helper rgmii_clock
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• [PATCH v4 08/16] net: dwmac-rk: Use helper rgmii_clock
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• [PATCH v4 11/16] net: xgene_enet: Use helper rgmii_clock
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• [PATCH v4 05/16] net: dwmac-dwc-qos-eth: Use helper rgmii_clock
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• [PATCH v4 06/16] net: dwmac-imx: Use helper rgmii_clock
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• [PATCH v4 03/16] net: stmmac: Fix clock rate variables size
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• [PATCH v4 04/16] net: phy: Add helper for mapping RGMII link speed to clock rate
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• [PATCH v4 02/16] net: driver: stmmac: Extend CSR calc support
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• [PATCH v4 00/16] Add support for Synopsis DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• [PATCH v4 01/16] net: driver: stmmac: Fix CSR divider comment
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• Re: [PATCH v3 04/16] net: phy: Add helper for mapping RGMII link speed to clock rate
  • From: Jan Petrous <jan.petrous@xxxxxxxxxxx>
• Re: [PATCH v3 0/6] Add Nothing Phone (1) support
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• [pull] drm/msm: drm-msm-next-2024-10-28 for v6.13
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v7 3/5] firmware: psci: Read and use vendor reset types
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH v2 5/5] clk: qcom: dispcc-sm6115: remove alpha values from disp_cc_pll0_config
  • From: Gabor Juhos <j4g8y7@xxxxxxxxx>
• [PATCH v2 4/5] clk: qcom: dispcc-qcm2290: remove alpha values from disp_cc_pll0_config
  • From: Gabor Juhos <j4g8y7@xxxxxxxxx>
• [PATCH v2 3/5] clk: qcom: gcc-ipq6018: remove alpha values from NSS Crypto PLL's config
  • From: Gabor Juhos <j4g8y7@xxxxxxxxx>
• [PATCH v2 2/5] clk: qcom: apps-ipq-pll: drop 'alpha_en_mask' from IPQ5332 PLL config
  • From: Gabor Juhos <j4g8y7@xxxxxxxxx>
• [PATCH v2 1/5] clk: qcom: apss-ipq-pll: drop 'alpha_en_mask' from IPQ5018 PLL config
  • From: Gabor Juhos <j4g8y7@xxxxxxxxx>
• [PATCH v2 0/5] clk: qcom: remove superfluous alpha settings from PLL configs
  • From: Gabor Juhos <j4g8y7@xxxxxxxxx>
• [PATCH v7 0/5] Implement vendor resets for PSCI SYSTEM_RESET2
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v7 5/5] arm64: dts: qcom: Add PSCI SYSTEM_RESET2 types for sa8775p-ride
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v7 3/5] firmware: psci: Read and use vendor reset types
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v7 4/5] arm64: dts: qcom: Add PSCI SYSTEM_RESET2 types for qcm6490-idp
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v7 1/5] dt-bindings: power: reset: Convert mode-.* properties to array
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v7 2/5] dt-bindings: arm: Document reboot mode magic
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH v29 01/33] xhci: support setting interrupt moderation IMOD for secondary interrupters
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: cache: qcom,llcc: Fix X1E80100 reg entries
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] soc: qcom: Rework BCM_TCS_CMD macro
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [RFC PULL] ath11k: move WCN6750 firmware to the device-specific subdir
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• [PATCH] qcom_hidma: fix memory leak of kfifo
  • From: Keisuke Nishimura <keisuke.nishimura@xxxxxxxx>
• [PATCH v2] soc: qcom: Rework BCM_TCS_CMD macro
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: thermal: qcom-tsens: add SAR2130P compatible
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH v3 3/3] soc: qcom: llcc: add support for SAR2130P and SAR1130P
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] soc: qcom: llcc: use deciman integers for bit shift values
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] arm64: dts: qcom: qcs615: add the APPS SMMU node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 4/4] arm64: dts: qcom: Add CMN PLL node for IPQ9574 SoC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] firmware: arm_scmi: fix slab-use-after-free in scmi_bus_notifier()
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: [PATCH v2 1/2] arm64: dts: qcom: Add support for usb nodes on QCS8300
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v5 4/4] arm64: dts: qcom: Add CMN PLL node for IPQ9574 SoC
  • From: Luo Jie <quic_luoj@xxxxxxxxxxx>
• [PATCH v5 3/4] arm64: defconfig: Enable Qualcomm IPQ CMN PLL clock controller
  • From: Luo Jie <quic_luoj@xxxxxxxxxxx>
• [PATCH v5 2/4] clk: qcom: Add CMN PLL clock controller driver for IPQ SoC
  • From: Luo Jie <quic_luoj@xxxxxxxxxxx>
• [PATCH v5 1/4] dt-bindings: clock: qcom: Add CMN PLL clock controller for IPQ SoC
  • From: Luo Jie <quic_luoj@xxxxxxxxxxx>
• [PATCH v5 0/4] Add CMN PLL clock controller driver for IPQ9574
  • From: Luo Jie <quic_luoj@xxxxxxxxxxx>
• Re: [RFC PATCH 1/2] drm/drm_file: Add display of driver's internal memory size
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• Re: [RFC] remoteproc: Clean rproc-driver-data for each instance
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/2] wifi: ath11k: support board-specific firmware overrides
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [RFC] remoteproc: Clean rproc-driver-data for each instance
  • From: Wasim Nazir <quic_wasimn@xxxxxxxxxxx>
• Re: [PATCH V4 3/4] pmdomain: core: Fix debugfs node creation failure
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v3 2/2] arm64: dts: qcom: qcs615-ride: Enable PMIC peripherals
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 2/3] arm64: dts: qcom: x1e80100: Describe TLMM pins for SDC2
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] arm64: dts: qcom: qcs615-ride: Enable PMIC peripherals
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v1] arm64: dts: qcom: qcs615: Add QUPv3 configuration
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v1] arm64: dts: qcom: qcs615: Add QUPv3 configuration
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] mmc: sdhci-msm: Slot indexing for distinguishing multiple SDCC instances
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] drm/msm/a6xx: Fix excessive stack usage
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: Rework BCM_TCS_CMD macro
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxx>
• Re: [PATCH] drm/msm/a6xx: Fix excessive stack usage
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: qcs615: Add QUPv3 configuration
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v9 0/4] io-pgtable-arm + drm/msm: Extend iova fault debugging
  • From: Mostafa Saleh <smostafa@xxxxxxxxxx>
• Re: [PATCH 1/5] clk: qcom: apss-ipq-pll: drop 'alpha_en_mask' from IPQ5018 PLL config
  • From: Gabor Juhos <j4g8y7@xxxxxxxxx>
• [PATCH 1/3] drm/msm/dp: prefix all symbols with msm_dp_
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 3/3] drm/msm/dp: tidy up platform data names
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/3] drm/msm/dp: rename edp_ bridge functions and struct
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 0/3] drm/msm/dp: mass-rename symbols
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/2] arm64: dts: qcom: Add support for usb nodes on QCS8300
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: qcs615: Add QUPv3 configuration
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v1] arm64: dts: qcom: qcs615: Add QUPv3 configuration
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] drm/msm/a6xx: Fix excessive stack usage
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• [PATCH v2] arm64: dts: qcom: qcs615: Add QUPv3 configuration
  • From: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
• Re: [PATCH v1] arm64: dts: qcom: qcs615: Add QUPv3 configuration
  • From: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
• Re: [PATCH v2 0/3] Add ethernet dts schema for qcs615/qcs8300
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] drm/msm/a6xx: Fix excessive stack usage
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH AUTOSEL 6.11 18/32] ASoC: codecs: lpass-rx-macro: fix RXn(rx,n) macro for DSM_CTL and SEC7 regs
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH] drm/msm/a6xx: Fix excessive stack usage
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v6 2/9] drm/msm/dpu: move pstate->pipe initialization to dpu_plane_atomic_check
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] mmc: sdhci-msm: Slot indexing for distinguishing multiple SDCC instances
  • From: Sachin Gupta <quic_sachgupt@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/a6xx: Fix excessive stack usage
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/msm/a6xx: Fix excessive stack usage
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] wifi: ath11k: support board-specific firmware overrides
  • From: Miaoqing Pan <quic_miaoqing@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/a6xx: Fix excessive stack usage
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 5/5] arm: dts: qcom-ipq5018-linksys-jamaica: Include dts from arm64
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/msm/a6xx: Fix excessive stack usage
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/a6xx: Fix excessive stack usage
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 2/2] arm64: dts: qcom: qcs615-ride: Enable PMIC peripherals
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
  • From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
• Re: [PATCH v3 2/3] arm64: dts: qcom: x1e80100: Describe TLMM pins for SDC2
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH v3 2/2] arm64: dts: qcom: qcs615-ride: Enable PMIC peripherals
  • From: Tingguo Cheng <quic_tingguoc@xxxxxxxxxxx>
• Re: [PATCH V4 4/5] soc: qcom: Introduce SCMI based Memlat (Memory Latency) governor
  • From: Cristian Marussi <cristian.marussi@xxxxxxx>
• Re: [PATCH 3/3] remoteproc: qcom: pas: enable SAR2130P audio DSP support
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH 2/3] remoteproc: qcom: pas: add minidump_id to SM8350 resources
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH] drm/msm/a6xx: Fix excessive stack usage
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 2/2] arm64: dts: qcom: qcs615-ride: Enable PMIC peripherals
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/3] arm64: dts: qcom: sar2130p: add support for SAR2130P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: Enable USB controllers for QCS8300
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 2/2] arm64: dts: qcom: qcs615-ride: Enable PMIC peripherals
  • From: Tingguo Cheng <quic_tingguoc@xxxxxxxxxxx>
• [PATCH v3 1/2] arm64: dts: qcom: qcs615: Adds SPMI support
  • From: Tingguo Cheng <quic_tingguoc@xxxxxxxxxxx>
• [PATCH v3 0/2] Adds SPMI bus, PMIC and peripherals for qcs615
  • From: Tingguo Cheng <quic_tingguoc@xxxxxxxxxxx>
• Re: [PATCH v8 4/7] dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH v8 6/7] arm64: dts: qcom: ipq9574: Add nsscc node
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH V5 2/6] dt-bindings: clock: Add Qualcomm IPQ5424 GCC binding
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: clock: qcom: Add GPU clocks for QCS8300
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v5 5/5] arm: dts: qcom-ipq5018-linksys-jamaica: Include dts from arm64
  • From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
• Re: [PATCH v1 3/5] dmaengine: qcom: gpi: Add provision to support TRE size as the fourth argument of dma-cells property
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• Re: [PATCH v8 5/7] clk: qcom: Add NSS clock Controller driver for IPQ9574
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH v1 5/5] i2c: i2c-qcom-geni: Add Block event interrupt support
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• Re: [PATCH v1 5/5] i2c: i2c-qcom-geni: Add Block event interrupt support
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• [PATCH V5 3/6] clk: qcom: add Global Clock controller (GCC) driver for IPQ5424 SoC
  • From: Sricharan R <quic_srichara@xxxxxxxxxxx>
• [PATCH V5 6/6] arm64: defconfig: Enable IPQ5424 RDP466 base configs
  • From: Sricharan R <quic_srichara@xxxxxxxxxxx>
• [PATCH V5 5/6] arm64: dts: qcom: add IPQ5424 SoC and rdp466 board support
  • From: Sricharan R <quic_srichara@xxxxxxxxxxx>
• [PATCH V5 4/6] dt-bindings: qcom: Add ipq5424 boards
  • From: Sricharan R <quic_srichara@xxxxxxxxxxx>
• [PATCH V5 2/6] dt-bindings: clock: Add Qualcomm IPQ5424 GCC binding
  • From: Sricharan R <quic_srichara@xxxxxxxxxxx>
• [PATCH V5 1/6] clk: qcom: clk-alpha-pll: Add NSS HUAYRA ALPHA PLL support for ipq9574
  • From: Sricharan R <quic_srichara@xxxxxxxxxxx>
• [PATCH V5 0/6] Add minimal boot support for IPQ5424
  • From: Sricharan R <quic_srichara@xxxxxxxxxxx>
• Re: [PATCH v1 5/5] i2c: i2c-qcom-geni: Add Block event interrupt support
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• Re: [PATCH v1 1/5] dt-bindings: dmaengine: qcom: gpi: Add additional arg to dma-cell property
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• Re: [PATCH v1 1/5] dt-bindings: dmaengine: qcom: gpi: Add additional arg to dma-cell property
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• Re: [PATCH v1 1/5] dt-bindings: dmaengine: qcom: gpi: Add additional arg to dma-cell property
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• Re: [PATCH v1 2/5] arm64: dts: qcom: Add support for configuring channel TRE size
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: clock: qcom: Add GPU clocks for QCS8300
  • From: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
• Re: [PATCH v5 07/11] clk: qcom: rpmh: add support for SAR2130P
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: Add coresight nodes for QCS615
  • From: Jie Gan <quic_jiegan@xxxxxxxxxxx>
• Re: [PATCH v2 2/3] soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
  • From: Jingyi Wang <quic_jingyw@xxxxxxxxxxx>
• Re: [PATCH v2 2/3] soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
  • From: Jingyi Wang <quic_jingyw@xxxxxxxxxxx>
• Re: [PATCH v2 4/5] arm64: dts: qcom: move common parts for qcs8300-ride variants into a .dtsi
  • From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
• [PATCH v2] arm64: dts: qcom: Add coresight nodes for QCS615
  • From: Jie Gan <quic_jiegan@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: Add coresight nodes for QCS615
  • From: Jie Gan <quic_jiegan@xxxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: arm: qcom: add QAR2130P board
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: remoteproc: qcom,sm8350-pas: add SAR2130P aDSP compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: thermal: qcom-tsens: add SAR2130P compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH V3 0/3] X1E001DE Snapdragon Devkit for Windows
  • From: Jens Glathe <jens.glathe@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/3] dt-bindings: arm: qcom: Add Microsoft Windows Dev Kit 2023
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 1/3] dt-bindings: arm: qcom: Add Microsoft Windows Dev Kit 2023
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: nvmem: qcom,qfprom: Add SAR2130P compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: Enable USB controllers for QCS8300
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/a6xx: Fix excessive stack usage
  • From: "Arnd Bergmann" <arnd@xxxxxxxxxx>
• Re: [PATCH] drm: a6xx: avoid excessive stack usage
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• [PATCH] drm/msm/a6xx: Fix excessive stack usage
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: Enable USB controllers for QCS8300
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/3] arm64: dts: qcom: sar2130p: add support for SAR2130P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 3/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for WDK2023
  • From: Jens Glathe via B4 Relay <devnull+jens.glathe.oldschoolsolutions.biz@xxxxxxxxxx>
• [PATCH v4 1/3] dt-bindings: arm: qcom: Add Microsoft Windows Dev Kit 2023
  • From: Jens Glathe via B4 Relay <devnull+jens.glathe.oldschoolsolutions.biz@xxxxxxxxxx>
• [PATCH v4 0/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for Windows Dev Kit 2023
  • From: Jens Glathe via B4 Relay <devnull+jens.glathe.oldschoolsolutions.biz@xxxxxxxxxx>
• [PATCH v4 2/3] firmware: qcom: scm: Allow QSEECOM for Windows Dev Kit 2023
  • From: Jens Glathe via B4 Relay <devnull+jens.glathe.oldschoolsolutions.biz@xxxxxxxxxx>
• Re: [PATCH 1/3] arm64: dts: qcom: sar2130p: add support for SAR2130P
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: Enable USB controllers for QCS8300
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH 1/3] drm/msm: Avoid NULL dereference in msm_disp_state_print_regs()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 11/11] clk: qcom: add SAR2130P GPU Clock Controller support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 08/11] clk: qcom: add support for GCC on SAR2130P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 10/11] clk: qcom: dispcc-sm8550: enable support for SAR2130P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 09/11] clk: qcom: tcsrcc-sm8550: add SAR2130P support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 07/11] clk: qcom: rpmh: add support for SAR2130P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 06/11] clk: qcom: rcg2: add clk_rcg2_shared_floor_ops
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 05/11] dt-bindings: clk: qcom,sm8450-gpucc: add SAR2130P compatibles
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 04/11] dt-bindings: clock: qcom,sm8550-dispcc: Add SAR2130P compatible
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 03/11] dt-bindings: clock: qcom,sm8550-tcsr: Add SAR2130P compatible
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 02/11] dt-bindings: clock: qcom: document SAR2130P Global Clock Controller
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 01/11] dt-bindings: clock: qcom,rpmhcc: Add SAR2130P compatible
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 00/11] clk: qcom: add support for clock controllers on the SAR2130P platform
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/3] arm64: dts: qcom: sar2130p: add support for SAR2130P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: sar2130p: add QAR2130P board file
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/3] dt-bindings: arm: qcom: add QAR2130P board
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 0/3] arm64: dts: qcom: add QAR2130P support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] clk: qcom: Make GCC_8150 depend on QCOM_GDSC
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: nvmem: qcom,qfprom: Add SAR2130P compatible
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 1/2] nvmem: qfprom: Ensure access to qfprom is word aligned
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 0/2] nvmem: qfprom: add Qualcomm SAR2130P support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 11/11] clk: qcom: add SAR2130P GPU Clock Controller support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 3/3] remoteproc: qcom: pas: enable SAR2130P audio DSP support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/3] remoteproc: qcom: pas: add minidump_id to SM8350 resources
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/3] dt-bindings: remoteproc: qcom,sm8350-pas: add SAR2130P aDSP compatible
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 0/3] remoteproc: qcom: pas: enable ADSP support on Qualcomm SAR2130P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] dt-bindings: thermal: qcom-tsens: add SAR2130P compatible
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/5] clk: qcom: apps-ipq-pll: drop 'alpha_en_mask' from IPQ5332 PLL config
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 5/5] clk: qcom: dispcc-sm6115: remove alpha values from disp_cc_pll0_config
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/5] clk: qcom: gcc-ipq6018: remove alpha values from NSS Crypto PLL's config
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/5] clk: qcom: apss-ipq-pll: drop 'alpha_en_mask' from IPQ5018 PLL config
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] cpuidle: Fix reference count on CPU node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 4/4] arm64: dts: qcom: qcs615: add the APPS SMMU node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH V4 4/5] soc: qcom: Introduce SCMI based Memlat (Memory Latency) governor
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC PATCH 2/6] dt-bindings: net: wireless: ath12k: describe WSI property for QCN9274
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 2/2] arm64: dts: qcom: sm8650: correct MDSS interconnects
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 1/2] arm64: dts: qcom: sm8550: correct MDSS interconnects
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 0/2] arm64: dts: qcom: sm8[56]50: correct MDSS interconnects
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: Enable USB controllers for QCS8300
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/2] arm64: dts: qcom: Add support for usb nodes on QCS8300
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: interrupt-controller: qcom,pdc: Add SAR2130P compatible
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 11/11] clk: qcom: add SAR2130P GPU Clock Controller support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 08/11] clk: qcom: add support for GCC on SAR2130P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 10/11] clk: qcom: dispcc-sm8550: enable support for SAR2130P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 09/11] clk: qcom: tcsrcc-sm8550: add SAR2130P support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 07/11] clk: qcom: rpmh: add support for SAR2130P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 06/11] clk: qcom: rcg2: add clk_rcg2_shared_floor_ops
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 05/11] dt-bindings: clk: qcom,sm8450-gpucc: add SAR2130P compatibles
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 04/11] dt-bindings: clock: qcom,sm8550-dispcc: Add SAR2130P compatible
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 03/11] dt-bindings: clock: qcom,sm8550-tcsr: Add SAR2130P compatible
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 02/11] dt-bindings: clock: qcom: document SAR2130P Global Clock Controller
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 01/11] dt-bindings: clock: qcom,rpmhcc: Add SAR2130P compatible
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 00/11] clk: qcom: add support for clock controllers on the SAR2130P platform
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 3/3] soc: qcom: llcc: add support for SAR2130P and SAR1130P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 2/3] soc: qcom: llcc: use deciman integers for bit shift values
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: cache: qcom,llcc: document SAR2130P and SAR1130P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 0/3] soc: qcom: llcc: add support for SAR2130P and SAR1130P platforms
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] drm/msm/gpu: Fix missing error check for dev_pm_qos_add_request()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] clk: qcom: Make GCC_8150 depend on QCOM_GDSC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH V2 3/3] interconnect: qcom: Add EPSS L3 support on SA8775P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH V2 1/3] dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH V2 3/3] interconnect: qcom: Add EPSS L3 support on SA8775P
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• [PATCH V2 2/3] arm64: dts: qcom: sa8775p: add EPSS l3 interconnect provider
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• [PATCH V2 1/3] dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• [PATCH V2 0/3] Add EPSS L3 provider support on SA8775P SoC
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: sa8775p: Add LMH interrupts support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] interconnect: qcom: Add EPSS L3 support on SA8775P
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 3/3] interconnect: qcom: Add EPSS L3 support on SA8775P
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/6] dt-bindings: clock: qcom: Add QCS8300 video clock controller
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: clock: qcom: Add GPU clocks for QCS8300
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v12 3/8] mtd: rawnand: qcom: Add qcom prefix to common api
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 5/5] arm: dts: qcom-ipq5018-linksys-jamaica: Include dts from arm64
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] interconnect: qcom: Add EPSS L3 support on SA8775P
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 6/6] arm64: dts: qcom: add base QCS615 RIDE dts
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• [PATCH] clk: qcom: Make GCC_8150 depend on QCOM_GDSC
  • From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
• Re: [PATCH v6 03/12] arm64: dts: qcom: sdm845-starqltechn: fix usb regulator mistake
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 06/12] arm64: dts: qcom: sdm845-starqltechn: add gpio keys
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 07/12] arm64: dts: qcom: sdm845-starqltechn: add max77705 PMIC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 10/12] arm64: dts: qcom: sdm845-starqltechn: add initial sound support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 12/12] arm64: dts: qcom: sdm845-starqltechn: add modem support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: sdm845-xiaomi-beryllium-ebbg: introduce touchscreen support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: sdm845-xiaomi-beryllium-tianma: introduce touchscreen support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] Add Xiaomi Poco F1 touchscreen support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 05/12] arm64: dts: qcom: sdm845-starqltechn: remove excess reserved gpios
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 01/12] arm64: dts: qcom: sdm845: enable gmu
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v8 6/7] arm64: dts: qcom: ipq9574: Add nsscc node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• [PATCH] drm/msm/gpu: Fix missing error check for dev_pm_qos_add_request()
  • From: Jinjie Ruan <ruanjinjie@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: Rework BCM_TCS_CMD macro
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH V1 1/2] dt-bindings: crypto: qcom-qce: document the SA8775P crypto engine
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/4] dt-bindings: arm: qcom,coresight-static-replicator: Add property for source filtering
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [PATCH v4 1/4] dt-bindings: arm: qcom,coresight-static-replicator: Add property for source filtering
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] wifi: ath11k: support board-specific firmware overrides
  • From: Miaoqing Pan <quic_miaoqing@xxxxxxxxxxx>
• Re: [PATCH v8 6/7] arm64: dts: qcom: ipq9574: Add nsscc node
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v29 04/33] xhci: sideband: add initial api to register a sideband entity
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v6 5/9] drm/msm/dpu: split dpu_plane_atomic_check()
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v6 4/9] drm/msm/dpu: move scaling limitations out of the hw_catalog
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: sm8550: correct MDSS interconnects
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH] soc: qcom: Rework BCM_TCS_CMD macro
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] pinctrl: qcom: spmi: fix debugfs drive strength
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 3/5] clk: qcom: gcc-ipq6018: remove alpha values from NSS Crypto PLL's config
  • From: Gabor Juhos <j4g8y7@xxxxxxxxx>
• Re: [PATCH 1/5] clk: qcom: apss-ipq-pll: drop 'alpha_en_mask' from IPQ5018 PLL config
  • From: Gabor Juhos <j4g8y7@xxxxxxxxx>
• Re: [PATCH v1] arm64: dts: qcom: qcs615: Add QUPv3 configuration
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH 3/6] arm64: dts: qcom: sc8280xp-x13s: Drop redundant clock-lanes from camera@10
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v5] arm64: dts: qcom: Add coresight nodes for x1e80100
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v1 4/4] arm64: dts: qcom: qcs615-ride: Enable UFS node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v1 3/4] arm64: dts: qcom: qcs615: add UFS node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 5/5] arm64: dts: qcom: qrb4210-rb2: add HDMI audio playback support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH 6/6] remoteproc: qcom: Enable map/unmap and SHM bridge support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH 5/6] remoteproc: qcom: Add support of SHM bridge to enable memory protection
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 2/9] drm/msm/dpu: move pstate->pipe initialization to dpu_plane_atomic_check
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v3 3/4] soc: qcom: geni-se: Do not keep GPIOs to sleep state for shared SE usecase
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] dma: gpi: Add Lock and Unlock TRE support to access SE exclusively
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: Add coresight nodes for QCS615
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 2/2] arm64: dts: qcom: sa8775p: Add support for clock controllers
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 2/2] arm64: dts: qcom: sa8775p: Add support for clock controllers
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] arm64: dts: qcom: x1e80100-qcp: Enable SD card support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] arm64: dts: qcom: x1e80100: Describe TLMM pins for SDC2
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] arm64: dts: qcom: x1e80100: Describe the SDHC controllers
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: accel: kxcjk-1013: Add support for KX022-1020
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 10/11] clk: qcom: dispcc-sm8550: enable support for SAR2130P
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v12 4/8] mtd: nand: Add qpic_common API file
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] arm64: dts: qcom: Add support for usb nodes on QCS8300
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/5] dt-bindings: dmaengine: qcom: gpi: Add additional arg to dma-cell property
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• Re: [PATCH v3 08/11] clk: qcom: add support for GCC on SAR2130P
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 07/11] clk: qcom: rpmh: add support for SAR2130P
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: x1e78100-t14s: add sound support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v1 3/5] dmaengine: qcom: gpi: Add provision to support TRE size as the fourth argument of dma-cells property
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v12 6/8] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v12 5/8] mtd: rawnand: qcom: use FIELD_PREP and GENMASK
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/5] dt-bindings: dmaengine: qcom: gpi: Add additional arg to dma-cell property
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• [PATCH v2 3/3] i2c: i2c-qcom-geni: Add Block event interrupt support
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• [PATCH v2 2/3] i2c: qcom_geni: Update compile dependenices for qcom geni
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• [PATCH v2 1/3] dmaengine: qcom: gpi: Add GPI Block event interrupt support
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• [PATCH v2 0/3] Add Block event interrupt support for I2C protocol
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• Re: [PATCH 6/6] arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Add cma heap for libcamera softisp support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH 5/6] arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Add cma heap for libcamera softisp support
  • From: Konrad Dybcio <konradybcio@xxxxxxxxx>
• Re: [PATCH 2/6] arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Convert mezzanine riser to dtso
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] soc: qcom: llcc: add support for SAR2130P and SAR1130P
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/6] arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Convert mezzanine riser to dtbo
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: qcs8300: Add LLCC support for QCS8300
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/5] arm64: dts: qcom: qcs8300-ride-r2: add new board file
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/5] arm64: dts: qcom: move common parts for qcs8300-ride variants into a .dtsi
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/5] arm64: dts: qcom: qcs8300-ride: enable ethernet0
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcs615: Add LLCC support for QCS615
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] arm64: dts: qcom: qcs615: add the APPS SMMU node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH 3/6] arm64: dts: qcom: sc8280xp-x13s: Drop redundant clock-lanes from camera@10
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] accel/qaic: Add crashdump to Sahara
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH] soc: qcom: Rework BCM_TCS_CMD macro
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH] pinctrl: qcom: spmi: fix debugfs drive strength
  • From: Konrad Dybcio <konradybcio@xxxxxxxxx>
• Re: [PATCH v3 4/4] arm64: dts: qcom: qcs615: add the APPS SMMU node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v12 6/8] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH 1/6] arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Convert mezzanine riser to dtbo
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 6/6] arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Add cma heap for libcamera softisp support
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 5/6] arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Add cma heap for libcamera softisp support
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 4/6] arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Drop redundant clock-lanes from camera@1a
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 3/6] arm64: dts: qcom: sc8280xp-x13s: Drop redundant clock-lanes from camera@10
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 2/6] arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Convert mezzanine riser to dtso
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 0/6] qcom: camss: dts: Prune and tidy x13s, rb5 and rb3 CAMSS dts
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: x1e78100-t14s: add sound support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/3] interconnect: qcom: Add EPSS L3 support on SA8775P
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• [PATCH v2 0/2] soc: qcom: llcc: add support for SAR2130P and SAR1130P platforms
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/2] wifi: ath11k: support board-specific firmware overrides
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 2/2] soc: qcom: llcc: add support for SAR2130P and SAR1130P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: cache: qcom,llcc: document SAR2130P and SAR1130P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: x1e80100-crd: describe HID supplies
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: x1e80100-crd: describe HID supplies
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH v3 11/11] clk: qcom: add SAR2130P GPU Clock Controller support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 08/11] clk: qcom: add support for GCC on SAR2130P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 10/11] clk: qcom: dispcc-sm8550: enable support for SAR2130P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 09/11] clk: qcom: tcsrcc-sm8550: add SAR2130P support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 07/11] clk: qcom: rpmh: add support for SAR2130P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 06/11] clk: qcom: rcg2: add clk_rcg2_shared_floor_ops
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 05/11] dt-bindings: clk: qcom,sm8450-gpucc: add SAR2130P compatibles
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 04/11] dt-bindings: clock: qcom,sm8550-dispcc: Add SAR2130P compatible
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 03/11] dt-bindings: clock: qcom,sm8550-tcsr: Add SAR2130P compatible
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 02/11] dt-bindings: clock: qcom: document SAR2130P Global Clock Controller
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 01/11] dt-bindings: clock: qcom,rpmhcc: Add SAR2130P compatible
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 00/11] clk: qcom: add support for clock controllers on the SAR2130P platform
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 07/11] clk: qcom: rpmh: add support for SAR2130P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 1/3] dt-bindings: mmc: Add sdhci compatible for QCS615
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v2 2/2] wifi: ath11k: support board-specific firmware overrides
  • From: Miaoqing Pan <quic_miaoqing@xxxxxxxxxxx>
• Re: [PATCH v16 1/5] iommu/arm-smmu: re-enable context caching in smmu reset operation
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• Re: [PATCH V4 3/4] pmdomain: core: Fix debugfs node creation failure
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH V4 1/4] firmware: arm_scmi: Ensure that the message-id supports fastchannel
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [PATCH V4 3/4] pmdomain: core: Fix debugfs node creation failure
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [PATCH v4 4/4] arm64: dts: qcom: Add CMN PLL node for IPQ9574 SoC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH V4 0/4] firmware: arm_scmi: Misc Fixes
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 2/2] wifi: ath11k: support board-specific firmware overrides
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH V3 0/3] X1E001DE Snapdragon Devkit for Windows
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH V4 3/4] pmdomain: core: Fix debugfs node creation failure
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH V3 0/4] firmware: arm_scmi: Misc Fixes
  • From: Cristian Marussi <cristian.marussi@xxxxxxx>
• Re: [PATCH v2 2/2] wifi: ath11k: support board-specific firmware overrides
  • From: Miaoqing Pan <quic_miaoqing@xxxxxxxxxxx>
• Re: [PATCH V4 1/4] firmware: arm_scmi: Ensure that the message-id supports fastchannel
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH V3 0/4] firmware: arm_scmi: Misc Fixes
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH V3 0/4] firmware: arm_scmi: Misc Fixes
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: RFC: Advice on adding support for Qualcomm IPQ9574 SoC Ethernet
  • From: "Kiran Kumar C.S.K" <quic_kkumarcs@xxxxxxxxxxx>
• [PATCH V1 3/3] arm64: dts: qcom: x1e001de-devkit: Enable external DP support
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V1 2/3] arm64: dts: qcom: x1e001de-devkit: Enable SD card support
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V1 1/3] arm64: dts: qcom: x1e001de-devkit: Add audio related nodes
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V1 0/3] X1E001DE Devkit remaining features
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: net: wireless: ath11k-pci: add firmware-name property
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 2/4] dt-bindings: arm-smmu: document QCS615 APPS SMMU
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] mmc: sdhci-msm: Slot indexing for distinguishing multiple SDCC instances
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH V3 3/3] arm64: dts: qcom: Add X1E001DE Snapdragon Devkit for Windows
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V3 2/3] firmware: qcom: uefisecapp: Allow X1E Devkit devices
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V3 1/3] dt-bindings: arm: qcom: Add Snapdragon Devkit for Windows
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V3 0/3] X1E001DE Snapdragon Devkit for Windows
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] wifi: ath11k: support board-specific firmware overrides
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] pinctrl: qcom: spmi: fix debugfs drive strength
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• Re: [PATCH v4 6/7] arm64: dts: qcom: add base QCS615 RIDE dts
  • From: Lijuan Gao <quic_lijuang@xxxxxxxxxxx>
• Re: [PATCH] soc: qcom: Rework BCM_TCS_CMD macro
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxx>
• Re: [PATCH v2 2/2] wifi: ath11k: support board-specific firmware overrides
  • From: Miaoqing Pan <quic_miaoqing@xxxxxxxxxxx>
• Re: [PATCH v8 4/7] dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH V3 0/4] firmware: arm_scmi: Misc Fixes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 5/7] arm64: dts: qcom: add initial support for QCS615 DTSI
  • From: Lijuan Gao <quic_lijuang@xxxxxxxxxxx>
• Re: [PATCH v4 0/7] Add initial support for QCS615 SoC and QCS615 RIDE board
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 4/4] arm64: dts: qcom: qcs615: add the APPS SMMU node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: x1e80100: Add performance hint for boost clock
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4] um: Remove double zero check
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH -next] i2c: qcom-cci: Remove the unused variable cci_clk_rate
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] mmc: sdhci-msm: Slot indexing for distinguishing multiple SDCC instances
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>