Re: [PATCH 2/3] arm64: dts: qcom: x1e80100-romulus: Set up PCIe3 / SDCard reader

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 22.11.2024 10:27 AM, Dmitry Baryshkov wrote:
> On Fri, Nov 22, 2024 at 03:14:11AM +0100, Konrad Dybcio wrote:
>> From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
>>
>> The Surface Laptops have a Realtek RTS5261 SD Card reader connected
>> over a Gen1x1 link to the PCIe3 host. Set up the necessary bits to
>> make it functional.
>>
>> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
>> ---

[...]

>>  
>> +&pm8550ve_2_gpios {
>> +	sde7_main_reg_en: sde7-main-reg-en-state {
>> +		pins = "gpio6";
>> +		function = "normal";
>> +	};
>> +
>> +	sde7_aux_reg_en: sde7-aux-reg-en-state {
>> +		pins = "gpio8";
>> +		function = "normal";
>> +	};
>> +};
>> +
>> +&pm8550ve_8_gpios {
>> +	vreg_12v_x8_en: 12v-x8-reg-en-state {
>> +		pins = "gpio8";
>> +		function = "normal";
>> +	};
>> +};
> 
> These pinctrls don't seem to be used.

Moreover, two out of three are wrong ;) That's the reason for the comment
about them being untouchable.. could have seen that coming.

Thanks for spotting this, I'll resend shortly!

Konrad




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux