Add bindings for qcom,x1e80100-camss in order to support the camera subsystem for x1e80100 as found in various Co-Pilot laptops. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx> --- .../bindings/media/qcom,x1e80100-camss.yaml | 354 +++++++++++++++++++++ 1 file changed, 354 insertions(+) diff --git a/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml b/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml new file mode 100644 index 0000000000000000000000000000000000000000..ca2499cd52a51e14bad3cf8a8ca94c9d23ed5030 --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml @@ -0,0 +1,354 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/qcom,x1e80100-camss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm X1E80100 Camera Subsystem (CAMSS) + +maintainers: + - Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx> + +description: | + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms. + +properties: + compatible: + const: qcom,x1e80100-camss + + clocks: + maxItems: 29 + + clock-names: + items: + - const: camnoc_rt_axi + - const: camnoc_nrt_axi + - const: core_ahb + - const: cpas_ahb + - const: cpas_fast_ahb + - const: cpas_vfe0 + - const: cpas_vfe1 + - const: cpas_vfe_lite + - const: cphy_rx_clk_src + - const: csid + - const: csid_csiphy_rx + - const: csiphy0 + - const: csiphy0_timer + - const: csiphy1 + - const: csiphy1_timer + - const: csiphy2 + - const: csiphy2_timer + - const: csiphy4 + - const: csiphy4_timer + - const: gcc_axi_hf + - const: gcc_axi_sf + - const: vfe0 + - const: vfe0_fast_ahb + - const: vfe1 + - const: vfe1_fast_ahb + - const: vfe_lite + - const: vfe_lite_ahb + - const: vfe_lite_cphy_rx + - const: vfe_lite_csid + + interrupts: + maxItems: 13 + + interrupt-names: + items: + - const: csid0 + - const: csid1 + - const: csid2 + - const: csid_lite0 + - const: csid_lite1 + - const: csiphy0 + - const: csiphy1 + - const: csiphy2 + - const: csiphy4 + - const: vfe0 + - const: vfe1 + - const: vfe_lite0 + - const: vfe_lite1 + + iommus: + maxItems: 13 + + interconnects: + maxItems: 4 + + interconnect-names: + items: + - const: cam_ahb + - const: cam_hf_mnoc + - const: cam_sf_mnoc + - const: cam_sf_icp_mnoc + + power-domains: + items: + - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller. + - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller. + - description: Titan Top GDSC - Titan ISP Block, Global Distributed Switch Controller. + + power-domain-names: + items: + - const: ife0 + - const: ife1 + - const: top + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + description: + CSI input ports. + + patternProperties: + "^port@[03]+$": + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + + description: + Input port for receiving CSI data from a CSIPHY. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + reg: + maxItems: 12 + + reg-names: + items: + - const: csid0 + - const: csid1 + - const: csid2 + - const: csid_wrapper + - const: csiphy0 + - const: csiphy1 + - const: csiphy2 + - const: csiphy4 + - const: vfe_lite0 + - const: vfe_lite1 + - const: vfe0 + - const: vfe1 + + vdda-phy-supply: + description: + Phandle to a 0.9V regulator supply to PHY core block. + + vdda-pll-supply: + description: + Phandle to 1.2V regulator supply to PHY refclk pll block. + +required: + - clock-names + - clocks + - compatible + - interconnects + - interconnect-names + - interrupts + - interrupt-names + - iommus + - ports + - power-domains + - power-domain-names + - reg + - reg-names + - vdda-phy-supply + - vdda-pll-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,x1e80100-gcc.h> + #include <dt-bindings/clock/qcom,x1e80100-camcc.h> + #include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + camss: camss@ac62000 { + compatible = "qcom,x1e80100-camss"; + + reg = <0 0x0acb7000 0 0x2000>, + <0 0x0acb9000 0 0x2000>, + <0 0x0acbb000 0 0x2000>, + <0 0x0acb6000 0 0x1000>, + <0 0x0ace4000 0 0x1000>, + <0 0x0ace6000 0 0x1000>, + <0 0x0ace8000 0 0x1000>, + <0 0x0acec000 0 0x4000>, + <0 0x0acc7000 0 0x2000>, + <0 0x0accb000 0 0x2000>, + <0 0x0ac62000 0 0x2a00>, + <0 0x0ac71000 0 0x2a00>; + + reg-names = "csid0", + "csid1", + "csid2", + "csid_wrapper", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy4", + "vfe_lite0", + "vfe_lite1", + "vfe0", + "vfe1"; + + vdda-phy-supply = <&csiphy0_vdda_phy_supply>; + vdda-pll-supply = <&csiphy0_vdda_pll_supply>; + + interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-names = "csid0", + "csid1", + "csid2", + "csid_lite0", + "csid_lite1", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy4", + "vfe0", + "vfe1", + "vfe_lite0", + "vfe_lite1"; + + power-domains = <&camcc CAM_CC_IFE_0_GDSC>, + <&camcc CAM_CC_IFE_1_GDSC>, + <&camcc CAM_CC_TITAN_TOP_GDSC>; + + power-domain-names = "ife0", + "ife1", + "top"; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_RT_CLK>, + <&camcc CAM_CC_CAMNOC_AXI_NRT_CLK>, + <&camcc CAM_CC_CORE_AHB_CLK>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CPAS_FAST_AHB_CLK>, + <&camcc CAM_CC_CPAS_IFE_0_CLK>, + <&camcc CAM_CC_CPAS_IFE_1_CLK>, + <&camcc CAM_CC_CPAS_IFE_LITE_CLK>, + <&camcc CAM_CC_CPHY_RX_CLK_SRC>, + <&camcc CAM_CC_CSID_CLK>, + <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>, + <&camcc CAM_CC_CSIPHY0_CLK>, + <&camcc CAM_CC_CSI0PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY1_CLK>, + <&camcc CAM_CC_CSI1PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY2_CLK>, + <&camcc CAM_CC_CSI2PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY4_CLK>, + <&camcc CAM_CC_CSI4PHYTIMER_CLK>, + <&gcc GCC_CAMERA_HF_AXI_CLK>, + <&gcc GCC_CAMERA_SF_AXI_CLK>, + <&camcc CAM_CC_IFE_0_CLK>, + <&camcc CAM_CC_IFE_0_FAST_AHB_CLK>, + <&camcc CAM_CC_IFE_1_CLK>, + <&camcc CAM_CC_IFE_1_FAST_AHB_CLK>, + <&camcc CAM_CC_IFE_LITE_CLK>, + <&camcc CAM_CC_IFE_LITE_AHB_CLK>, + <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_LITE_CSID_CLK>; + + clock-names = "camnoc_rt_axi", + "camnoc_nrt_axi", + "core_ahb", + "cpas_ahb", + "cpas_fast_ahb", + "cpas_vfe0", + "cpas_vfe1", + "cpas_vfe_lite", + "cphy_rx_clk_src", + "csid", + "csid_csiphy_rx", + "csiphy0", + "csiphy0_timer", + "csiphy1", + "csiphy1_timer", + "csiphy2", + "csiphy2_timer", + "csiphy4", + "csiphy4_timer", + "gcc_axi_hf", + "gcc_axi_sf", + "vfe0", + "vfe0_fast_ahb", + "vfe1", + "vfe1_fast_ahb", + "vfe_lite", + "vfe_lite_ahb", + "vfe_lite_cphy_rx", + "vfe_lite_csid"; + + iommus = <&apps_smmu 0x800 0x60>, + <&apps_smmu 0x820 0x60>, + <&apps_smmu 0x840 0x60>, + <&apps_smmu 0x860 0x60>, + <&apps_smmu 0x1800 0x60>, + <&apps_smmu 0x1820 0x60>, + <&apps_smmu 0x1840 0x60>, + <&apps_smmu 0x1860 0x60>, + <&apps_smmu 0x18a0 0x00>, + <&apps_smmu 0x18e0 0x00>, + <&apps_smmu 0x1980 0x20>, + <&apps_smmu 0x1900 0x00>, + <&apps_smmu 0x19a0 0x20>; + + interconnects = <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_CAMERA_CFG 0>, + <&mmss_noc MASTER_CAMNOC_HF 0 &mc_virt SLAVE_EBI1 0>, + <&mmss_noc MASTER_CAMNOC_SF 0 &mc_virt SLAVE_EBI1 0>, + <&mmss_noc MASTER_CAMNOC_ICP 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "cam_ahb", + "cam_hf_mnoc", + "cam_sf_mnoc", + "cam_sf_icp_mnoc"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + csiphy_ep0: endpoint { + clock-lanes = <7>; + data-lanes = <0 1>; + remote-endpoint = <&sensor_ep>; + }; + }; + }; + }; + }; -- 2.45.2
