> -----Original Message----- > From: Md Sadre Alam (QUIC) <quic_mdalam@xxxxxxxxxxx> > Sent: Friday, November 22, 2024 2:30 PM > To: manivannan.sadhasivam@xxxxxxxxxx; miquel.raynal@xxxxxxxxxxx; > richard@xxxxxx; vigneshr@xxxxxx; bbrezillon@xxxxxxxxxx; linux- > mtd@xxxxxxxxxxxxxxxxxxx; linux-arm-msm@xxxxxxxxxxxxxxx; linux- > kernel@xxxxxxxxxxxxxxx > Cc: Sricharan Ramabadhran (QUIC) <quic_srichara@xxxxxxxxxxx>; > Varadarajan Narayanan (QUIC) <quic_varada@xxxxxxxxxxx>; Md Sadre Alam > (QUIC) <quic_mdalam@xxxxxxxxxxx>; Naina Mehta (QUIC) > <quic_nainmeht@xxxxxxxxxxx>; Lakshmi Sowjanya D (QUIC) > <quic_laksd@xxxxxxxxxxx> > Subject: [PATCH v2 0/3] QPIC v2 fixes for SDX75 > > v2: > * Updated commit message > * Added stable kernel tag > * Added Fixes tag > * Renamed the variable from offset_from_qpic to nandc_offset > * Set buf_count to 512 in the parameter page read > * Replaced the buf_count value of 512 with the len in bytes > > v1: > * These patches will fix the following: > * 1) onfi param page read which was broken by exec_op() patch. > * 2) Fixed offset passed to BAM from QPIC base > > Md Sadre Alam (3): > mtd: rawnand: qcom: Pass 18 bit offset from QPIC base address to BAM > mtd: rawnand: qcom: Fix onfi param page read > mtd: rawnand: qcom: Fix read len for onfi param page > > drivers/mtd/nand/raw/qcom_nandc.c | 23 ++++++++++++++++++----- > 1 file changed, 18 insertions(+), 5 deletions(-) > > -- Tested-by: Lakshmi Sowjanya D <quic_laksd@xxxxxxxxxxx> # on SDX75 -- Regards Lakshmi Sowjanya
