Linux ARM MSM

• Thread Index

• Re: [PATCH v6 2/6] power: sequencing: qcom-wcn: improve support for wcn6855
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] drm: a6xx: avoid excessive stack usage
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dm-inlinecrypt: Add inline encryption support
  • From: Adrian Vovk <adrianvovk@xxxxxxxxx>
• Re: [PATCH 2/3] mailbox: qcom-cpucp-mbox: Add support for SC7280 CPUCP mailbox controller
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for WDK2023
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for WDK2023
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 2/6] power: sequencing: qcom-wcn: improve support for wcn6855
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v7 6/7] PCI: qcom: Disable ASPM L0s and remove BDF2SID mapping config for X1E80100 SoC
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/msm/gpu: Check the status of registration to PM QoS
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• Re: [PATCH v7 7/7] arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v7 6/7] PCI: qcom: Disable ASPM L0s and remove BDF2SID mapping config for X1E80100 SoC
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v4 4/4] arm64: dts: qcom: Add CMN PLL node for IPQ9574 SoC
  • From: Jie Luo <quic_luoj@xxxxxxxxxxx>
• Re: [PATCH v7 5/7] PCI: qcom: Remove BDF2SID mapping config for SC8280X family SoC
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Fix X1E80100 resets entries
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH] dt-bindings: cache: qcom,llcc: Fix X1E80100 reg entries
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: mailbox: qcom,apcs-kpss-global: correct expected clocks for fallbacks
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH] Input: gpio-keys - fix un-responsive keys issue on hibernate exit
  • From: Kamal Wadhwa <quic_kamalw@xxxxxxxxxxx>
• [PATCH v6 6/6] arm64: dts: qcom: sm8450-hdk: model the PMU of the on-board wcn6855
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v6 5/6] arm64: dts: qcom: sc8280xp-x13s: model the PMU of the on-board wcn6855
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v6 4/6] arm64: dts: qcom: sc8280xp-crd: enable bluetooth
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v6 3/6] arm64: dts: qcom: sc8280xp-crd: model the PMU of the on-board wcn6855
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v6 2/6] power: sequencing: qcom-wcn: improve support for wcn6855
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v6 1/6] regulator: dt-bindings: qcom,qca6390-pmu: add more properties for wcn6855
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v6 0/6] arm64: dts: qcom: enable Bluetooth and WLAN on sc8280xp and sm8450 boards
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH V3] arm64: dts: qcom: qcm6490-idp: Add UFS nodes
  • From: Manish Pandey <quic_mapa@xxxxxxxxxxx>
• Re: [PATCH 6/6] clk: qcom: Add support for Video Clock Controller on QCS8300
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 4/6] clk: qcom: Add support for Camera Clock Controller on QCS8300
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/6] clk: qcom: Add support for GPU Clock Controller on QCS8300
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] drm/msm/gpu: Check the status of registration to PM QoS
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] drm/msm/gpu: Check the status of registration to PM QoS
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• [PATCH 6/6] clk: qcom: Add support for Video Clock Controller on QCS8300
  • From: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
• [PATCH 5/6] dt-bindings: clock: qcom: Add QCS8300 video clock controller
  • From: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
• [PATCH 4/6] clk: qcom: Add support for Camera Clock Controller on QCS8300
  • From: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
• [PATCH 3/6] dt-bindings: clock: qcom: Add CAMCC clocks for QCS8300
  • From: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
• [PATCH 2/6] clk: qcom: Add support for GPU Clock Controller on QCS8300
  • From: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
• [PATCH 1/6] dt-bindings: clock: qcom: Add GPU clocks for QCS8300
  • From: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
• [PATCH 0/6] Add support for GPUCC, CAMCC and VIDEOCC on Qualcomm QCS8300 platform
  • From: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
• Re: [PATCH v2] remoteproc: qcom_q6v5_pas: disable auto boot for wpss
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 06/14] clk: qcom: clk-branch: Add support for BRANCH_HALT_POLL flag
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] firmware: arm_scmi: fix slab-use-after-free in scmi_bus_notifier()
  • From: Cristian Marussi <cristian.marussi@xxxxxxx>
• Re: [PATCH 06/14] clk: qcom: clk-branch: Add support for BRANCH_HALT_POLL flag
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH v4 1/5] dt-bindings: display/msm: Document MDSS on SA8775P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2] remoteproc: qcom_q6v5_pas: disable auto boot for wpss
  • From: Balaji Pothunoori <quic_bpothuno@xxxxxxxxxxx>
• Re: [PATCH 07/14] clk: qcom: clk-branch: Add support for SREG branch ops
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: mailbox: qcom,cpucp-mbox: Add sc7280 cpucp mailbox instance
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 07/14] clk: qcom: clk-branch: Add support for SREG branch ops
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH v2 5/5] phy: qcom: qmp-usbc: Add qmp configuration for QCS615
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 4/5] phy: qcom-qusb2: Add support for QCS615
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 09/14] clk: qcom: gdsc: add separate sleep state collapse vote support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: arm: qcom,coresight-static-replicator: Add property for source filtering
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: arm: qcom,coresight-static-replicator: Add property for source filtering
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 09/14] clk: qcom: gdsc: add separate sleep state collapse vote support
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH v2 5/5] phy: qcom: qmp-usbc: Add qmp configuration for QCS615
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: arm: Add device-name in the coresight components
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: arm: Add device-name in the coresight components
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH v2 5/5] phy: qcom: qmp-usbc: Add qmp configuration for QCS615
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 0/5] Add support for DisplayPort on SA8775P platform
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: arm: qcom,coresight-static-replicator: Add property for source filtering
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH v5 0/5] Add support for DisplayPort on SA8775P platform
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: arm: qcom,coresight-static-replicator: Add property for source filtering
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 07/14] clk: qcom: clk-branch: Add support for SREG branch ops
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3] drm/display: Drop obsolete dependency on COMPILE_TEST
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [no subject]
  • From: Unknown
• Re: [PATCH v3 4/5] arm64: dts: qcom: x1e80100-crd: add rtc offset to set rtc time
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] clk: qcom: gcc-x1e80100: Fix USB MP SS1 PHY GDSC pwrsts flags
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v1 2/2] arm64: dts: qcom: x1e80100-dell-xps13-9345: fix nvme regulator boot glitch
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 2/7] serial: qcom-geni: fix shutdown race
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3 4/5] arm64: dts: qcom: sm4250: add LPASS LPI pin controller
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] remoteproc: qcom_q6v5_pas: disable auto boot for wpss
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 5/5] phy: qcom: qmp-usbc: Add qmp configuration for QCS615
  • From: Tingwei Zhang <quic_tingweiz@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: pinctrl : qcom: document SAR2130P TLMM
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 0/2] coresight: core: Add device name support
  • From: Jinlong Mao <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v2 2/2] pinctrl: qcom: add support for TLMM on SAR2130P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: pinctrl : qcom: document SAR2130P TLMM
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 0/2] pinctrl: qcom: add support for TLMM on SAR2130P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• RE: [PATCH] remoteproc: qcom_q6v5_pas: disable auto boot for wpss
  • From: "Balaji Pothunoori (QUIC)" <quic_bpothuno@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: pinctrl : qcom: document SAR2130P TLMM
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 05/14] dt-bindings: clk: qcom,sm8450-gpucc: add SAR2130P compatibles
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 2/2] interconnect: qcom: add support for SAR2130P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: interconnect: qcom: document SAR2130P NoC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 0/2] interconnect: qcom: add support for SAR2130P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2] dt-bindings: iommu: arm,smmu: Add Qualcomm SAR2130P compatible
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 4/4] arm64: dts: qcom: Add CMN PLL node for IPQ9574 SoC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 5/5] phy: qcom: qmp-usbc: Add qmp configuration for QCS615
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 5/5] phy: qcom: qmp-usbc: Add qmp configuration for QCS615
  • From: Tingwei Zhang <quic_tingweiz@xxxxxxxxxxx>
• [PATCH v2 3/3] arm64: dts: qcom: qcs615: add AOSS_QMP node
  • From: Kyle Deng <quic_chunkaid@xxxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: mailbox: qcom,apcs-kpss-global: Document the qcs615 APSS
  • From: Kyle Deng <quic_chunkaid@xxxxxxxxxxx>
• [PATCH v2 2/3] dt-bindings: aoss: qcom: Document the qcs615 AOSS_QMP
  • From: Kyle Deng <quic_chunkaid@xxxxxxxxxxx>
• [PATCH v2 0/3] Add aoss_qmp nodes for qcs615
  • From: Kyle Deng <quic_chunkaid@xxxxxxxxxxx>
• Re: [PATCH 13/14] clk: qcom: dispcc-sm8550: enable support for SAR2130P
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: firmware: qcom,scm: Add SAR2130P compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/2] interconnect: qcom: add support for SAR2130P
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH] dt-bindings: soc: qcom,aoss-qmp: Add SAR2130P compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: nvmem: qcom,qfprom: Add SAR2130P compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: mailbox: qcom-ipcc: Add SAR2130P compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: usb: qcom,dwc3: Add SAR2130P compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: spmi: qcom,x1e80100-spmi-pmic-arb: Add SAR2130P compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: interrupt-controller: qcom,pdc: Add SAR2130P compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/2] pmdomain: qcom: rpmhpd: add support for SAR2130P
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH] dt-bindings: interrupt-controller: qcom,pdc: Add SAR2130P compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: dma: qcom,gpi: Add SAR2130P compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iommu: arm,smmu: Add SAR2130P compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: PCI: qcom,pcie-sm8550: add SAR2130P compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: power: rpmpd: Add SAR2130P compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: phy: qcom: snps-eusb2: Add SAR2130P compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: interconnect: qcom: document SAR2130P NoC
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 05/14] dt-bindings: clk: qcom,sm8450-gpucc: add SAR2130P compatibles
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 03/14] dt-bindings: clock: qcom,sm8550-tcsr: Add SAR2130P compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v5 2/5] phy: qcom: edp: Introduce aux_cfg array for version specific aux settings
  • From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
• [PATCH v5 3/5] phy: qcom: edp: Add support for eDP PHY on SA8775P
  • From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
• [PATCH v5 5/5] drm/msm/dp: Add DisplayPort controller for SA8775P
  • From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
• [PATCH v5 1/5] dt-bindings: phy: Add eDP PHY compatible for sa8775p
  • From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
• [PATCH v5 0/5] Add support for DisplayPort on SA8775P platform
  • From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
• [PATCH v5 4/5] dt-bindings: display: msm: dp-controller: document SA8775P compatible
  • From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
• Re: [PATCH v3 05/11] KVM: guest_memfd: Add guest_memfd support to kvm_(read|/write)_guest_page()
  • From: Patrick Roy <roypat@xxxxxxxxxxxx>
• Re: [PATCH v4 4/4] arm64: dts: qcom: Add CMN PLL node for IPQ9574 SoC
  • From: Jie Luo <quic_luoj@xxxxxxxxxxx>
• Re: [PATCH 05/14] dt-bindings: clk: qcom,sm8450-gpucc: add SAR2130P compatibles
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 02/14] dt-bindings: clock: qcom: document SAR2130P Global Clock Controller
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 2/4] clk: qcom: Add CMN PLL clock controller driver for IPQ SoC
  • From: Jie Luo <quic_luoj@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: pinctrl : qcom: document SAR2130P TLMM
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH V1 1/2] dt-bindings: crypto: qcom-qce: document the SA8775P crypto engine
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: aoss: qcom: Document the qcs615 AOSS_QMP
  • From: Kyle Deng <quic_chunkaid@xxxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: arm: qcom: add qcs8300-ride Rev 2
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 4/4] arm64: dts: qcom: qcs615: add the APPS SMMU node
  • From: Qingqing Zhou <quic_qqzhou@xxxxxxxxxxx>
• Re: [PATCH V4 6/6] arm64: defconfig: Enable IPQ5424 RDP466 base configs
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH V4 2/6] dt-bindings: clock: Add Qualcomm IPQ5424 GCC binding
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: phy: Add QMP UFS PHY compatible for QCS8300
  • From: Jingyi Wang <quic_jingyw@xxxxxxxxxxx>
• [PATCH v4] dt-bindings: phy: Add QMP UFS PHY compatible for QCS8300
  • From: Jingyi Wang <quic_jingyw@xxxxxxxxxxx>
• Re: [PATCH v2 1/3] dm-inlinecrypt: Add inline encryption support
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH v29 01/33] xhci: support setting interrupt moderation IMOD for secondary interrupters
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] dm-inlinecrypt: Add inline encryption support
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] media: venus: Enable h.264 hierarchical coding
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• Re: [PATCH v4 1/2] media: venus: Helper function for dynamically updating bitrate
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• Re: [PATCH 2/2] pinctrl: qcom: add support for TLMM on SAR2130P
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH v2 1/3] dm-inlinecrypt: Add inline encryption support
  • From: Adrian Vovk <adrianvovk@xxxxxxxxx>
• [PATCH v5 3/3] coresight: dummy: Add static trace id support for dummy source
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v5 2/3] coresight: Add support to get static id for system trace sources
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v5 1/3] dt-bindings: arm: Add arm,static-trace-id for coresight dummy source
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v5 0/3] coresight: Add static trace id support
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v3 2/2] pinctrl: qcom: add the tlmm driver for QCS8300 platforms
  • From: Jingyi Wang <quic_jingyw@xxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: pinctrl: describe qcs8300-tlmm
  • From: Jingyi Wang <quic_jingyw@xxxxxxxxxxx>
• [PATCH v3 0/2] pinctrl: qcom: Introduce Pinctrl for QCS8300
  • From: Jingyi Wang <quic_jingyw@xxxxxxxxxxx>
• [PATCH v3 5/5] arm64: dts: qcom: qrb4210-rb2: add HDMI audio playback support
  • From: Alexey Klimov <alexey.klimov@xxxxxxxxxx>
• [PATCH v3 4/5] arm64: dts: qcom: sm4250: add LPASS LPI pin controller
  • From: Alexey Klimov <alexey.klimov@xxxxxxxxxx>
• [PATCH v3 3/5] arm64: dts: qcom: sm6115: add LPASS LPI pin controller
  • From: Alexey Klimov <alexey.klimov@xxxxxxxxxx>
• [PATCH v3 2/5] arm64: dts: qcom: sm6115: add apr and its services
  • From: Alexey Klimov <alexey.klimov@xxxxxxxxxx>
• [PATCH v3 1/5] ASoC: qcom: sm8250: add handling of secondary MI2S clock
  • From: Alexey Klimov <alexey.klimov@xxxxxxxxxx>
• [PATCH v3 0/5] rb4210-rb2: add HDMI audio playback support
  • From: Alexey Klimov <alexey.klimov@xxxxxxxxxx>
• Re: [PATCH 0/6] arm64: dts: qcom: x1e80100: fix nvme regulator boot glitch
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v29 01/33] xhci: support setting interrupt moderation IMOD for secondary interrupters
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH 1/3] arm64: dts: qcom: sa8775p: Add support to scale DDR/L3
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3] drm/display: Drop obsolete dependency on COMPILE_TEST
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 4/4] arm64: dts: qcom: Add CMN PLL node for IPQ9574 SoC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] remoteproc: qcom_q6v5_pas: disable auto boot for wpss
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 07/14] clk: qcom: clk-branch: Add support for SREG branch ops
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v2] ASoC: codecs: lpass-rx-macro: fix RXn(rx,n) macro for DSM_CTL and SEC7 regs
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 06/14] clk: qcom: clk-branch: Add support for BRANCH_HALT_POLL flag
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 07/14] clk: qcom: clk-branch: Add support for SREG branch ops
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 05/11] KVM: guest_memfd: Add guest_memfd support to kvm_(read|/write)_guest_page()
  • From: Ackerley Tng <ackerleytng@xxxxxxxxxx>
• Re: [PATCH 3/6] remoteproc: qcom: Add helper function to support IOMMU devmem translation
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] mailbox: qcom-cpucp-mbox: Add support for SC7280 CPUCP mailbox controller
  • From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: sc7280: Add cpucp mbox node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] arm64: dts: qcom: qcs615: add the APPS SMMU node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• [PATCH v4 0/2] media: venus: Add hierarchical h.264 controls
  • From: Fritz Koenig <frkoenig@xxxxxxxxxxxx>
• [PATCH v4 1/2] media: venus: Helper function for dynamically updating bitrate
  • From: Fritz Koenig <frkoenig@xxxxxxxxxxxx>
• [PATCH v4 2/2] media: venus: Enable h.264 hierarchical coding
  • From: Fritz Koenig <frkoenig@xxxxxxxxxxxx>
• Re: [PATCH 1/1] soc: qcom: socinfo: fix revision check in qcom_socinfo_probe()
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH 14/14] clk: qcom: add SAR2130P GPU Clock Controller support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH 12/14] clk: qcom: tcsrcc-sm8550: add SAR2130P support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH 10/14] clk: qcom: rpmh: add support for SAR2130P
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/5] phy: qcom: qmp-usbc: Add qmp configuration for QCS615
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] dt-bindings: firmware: qcom,scm: Add SAR2130P compatible
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] dt-bindings: soc: qcom,aoss-qmp: Add SAR2130P compatible
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] dt-bindings: nvmem: qcom,qfprom: Add SAR2130P compatible
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] dt-bindings: mailbox: qcom-ipcc: Add SAR2130P compatible
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] dt-bindings: usb: qcom,dwc3: Add SAR2130P compatible
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 00/23] drm/msm/dpu: Add Concurrent Writeback Support for DPU 10.x+
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH] dt-bindings: spmi: qcom,x1e80100-spmi-pmic-arb: Add SAR2130P compatible
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] dt-bindings: interrupt-controller: qcom,pdc: Add SAR2130P compatible
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] dt-bindings: dma: qcom,gpi: Add SAR2130P compatible
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 07/14] clk: qcom: clk-branch: Add support for SREG branch ops
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• [PATCH] dt-bindings: iommu: arm,smmu: Add SAR2130P compatible
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] dt-bindings: PCI: qcom,pcie-sm8550: add SAR2130P compatible
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 06/14] clk: qcom: clk-branch: Add support for BRANCH_HALT_POLL flag
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• [PATCH 2/2] pmdomain: qcom: rpmhpd: add support for SAR2130P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 0/2] pmdomain: qcom: add support for RPMh power domains on SAR2130P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: power: rpmpd: Add SAR2130P compatible
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] dt-bindings: phy: qcom: snps-eusb2: Add SAR2130P compatible
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 2/4] clk: qcom: Add CMN PLL clock controller driver for IPQ SoC
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• [PATCH 2/2] interconnect: qcom: add support for SAR2130P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: interconnect: qcom: document SAR2130P NoC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 0/2] interconnect: qcom: add support for SAR2130P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 03/14] dt-bindings: clock: qcom,sm8550-tcsr: Add SAR2130P compatible
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 05/14] dt-bindings: clk: qcom,sm8450-gpucc: add SAR2130P compatibles
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 12/14] clk: qcom: tcsrcc-sm8550: add SAR2130P support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 14/14] clk: qcom: add SAR2130P GPU Clock Controller support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 13/14] clk: qcom: dispcc-sm8550: enable support for SAR2130P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 11/14] clk: qcom: add support for GCC on SAR2130P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 10/14] clk: qcom: rpmh: add support for SAR2130P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 09/14] clk: qcom: gdsc: add separate sleep state collapse vote support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 07/14] clk: qcom: clk-branch: Add support for SREG branch ops
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 08/14] clk: qcom: rcg2: add clk_rcg2_shared_floor_ops
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 06/14] clk: qcom: clk-branch: Add support for BRANCH_HALT_POLL flag
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 04/14] dt-bindings: clock: qcom,sm8550-dispcc: Add SAR2130P compatible
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 01/14] dt-bindings: clock: qcom,rpmhcc: Add SAR2130P compatible
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 02/14] dt-bindings: clock: qcom: document SAR2130P Global Clock Controller
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 00/14] clk: qcom: add support for clock controllers on the SAR2130P platform
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 09/10] clocksource/drivers/qcom: Remove clockevents shutdown call on offlining
  • From: Frederic Weisbecker <frederic@xxxxxxxxxx>
• Re: [PATCH v1 0/2] X1E Dell XPS 9345 Improvements 1
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v2 8/8] PCI: pwrctl: Add power control driver for qps615
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/2] pinctrl: qcom: add support for TLMM on SAR2130P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: pinctrl : qcom: document SAR2130P TLMM
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 0/2] pinctrl: qcom: add support for TLMM on SAR2130P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH RFC] usb: typec: ucsi: Set orientation as none when connector is unplugged
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH v2 8/8] PCI: pwrctl: Add power control driver for qps615
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: sa8775p: Add CPU OPP tables to scale DDR/L3
  • From: Brian Masney <bmasney@xxxxxxxxxx>
• Re: [PATCH v2 0/2] phy: add NXP PTN3222 eUSB2 to USB2 redriver
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v4 2/4] clk: qcom: Add CMN PLL clock controller driver for IPQ SoC
  • From: Jie Luo <quic_luoj@xxxxxxxxxxx>
• Re: (subset) [PATCH v4 0/5] Add support for DisplayPort on SA8775P platform
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: (subset) [PATCH v7 0/7] Add support for PCIe3 on x1e80100
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: (subset) [PATCH v1 0/4] Enable UFS on QCS615
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] phy: qcom: qmp-pcie: drop bogus x1e80100 qref supplies
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 0/4] phy: qcom: qmp-usb: fix NULL-deref on runtime suspend
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: (subset) [PATCH 0/3] arm64: dts: qcom: x1e80100: fix missing PCIe PHY clocks
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: phy: Add QMP UFS PHY compatible for QCS8300
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH V1 0/2] Add QCrypto support for SA8775P
  • From: Yuvaraj Ranganathan <quic_yrangana@xxxxxxxxxxx>
• [PATCH V1 2/2] arm64: dts: qcom: sa8775p: add QCrypto nodes
  • From: Yuvaraj Ranganathan <quic_yrangana@xxxxxxxxxxx>
• [PATCH V1 1/2] dt-bindings: crypto: qcom-qce: document the SA8775P crypto engine
  • From: Yuvaraj Ranganathan <quic_yrangana@xxxxxxxxxxx>
• Re: [PATCH v3 00/23] drm/msm/dpu: Add Concurrent Writeback Support for DPU 10.x+
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: x1e80100-qcp: Add WiFi/BT pwrseq
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v2 5/5] phy: qcom: qmp-usbc: Add qmp configuration for QCS615
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v2 4/5] phy: qcom-qusb2: Add support for QCS615
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v2 3/5] dt-bindings: phy: qcom,msm8998-qmp-usb3-phy: Add support for QCS615
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v2 2/5] dt-bindings: phy: qcom,qusb2: Add bindings for QCS615
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v2 0/5] Add support for primary USB controller on QCS615
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v2 1/5] dt-bindings: usb: qcom,dwc3: Add QCS615 to USB DWC3 bindings
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: clock: Add Qualcomm SM6115 LPASS clock controller
  • From: "Alexey Klimov" <alexey.klimov@xxxxxxxxxx>
• [PATCH V4 6/6] arm64: defconfig: Enable IPQ5424 RDP466 base configs
  • From: Sricharan R <quic_srichara@xxxxxxxxxxx>
• [PATCH V4 3/6] clk: qcom: add Global Clock controller (GCC) driver for IPQ5424 SoC
  • From: Sricharan R <quic_srichara@xxxxxxxxxxx>
• [PATCH V4 5/6] arm64: dts: qcom: add IPQ5424 SoC and rdp466 board support
  • From: Sricharan R <quic_srichara@xxxxxxxxxxx>
• [PATCH V4 4/6] dt-bindings: qcom: Add ipq5424 boards
  • From: Sricharan R <quic_srichara@xxxxxxxxxxx>
• [PATCH V4 2/6] dt-bindings: clock: Add Qualcomm IPQ5424 GCC binding
  • From: Sricharan R <quic_srichara@xxxxxxxxxxx>
• [PATCH V4 1/6] clk: qcom: clk-alpha-pll: Add NSS HUAYRA ALPHA PLL support for ipq9574
  • From: Sricharan R <quic_srichara@xxxxxxxxxxx>
• [PATCH V4 0/6] Add minimal boot support for IPQ5424
  • From: Sricharan R <quic_srichara@xxxxxxxxxxx>
• [PATCH V4] arm64: dts: qcom: qcm6490-idp: Allow UFS regulators load/mode setting
  • From: Rakesh Kota <quic_kotarake@xxxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: x1e80100-qcp: Add WiFi/BT pwrseq
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: x1e80100-qcp: Add WiFi/BT pwrseq
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/3] mailbox: qcom-cpucp-mbox: Add support for SC7280 CPUCP mailbox controller
  • From: Shivnandan Kumar <quic_kshivnan@xxxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: sc7280: Add cpucp mbox node
  • From: Shivnandan Kumar <quic_kshivnan@xxxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: x1e80100-qcp: Add WiFi/BT pwrseq
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Add PCIe nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: x1e80100-qcp: Add WiFi/BT pwrseq
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v2 5/5] arm64: dts: qcom: qcs8300-ride-r2: add new board file
  • From: YijieYang <quic_yijiyang@xxxxxxxxxxx>
• [PATCH v2 4/5] arm64: dts: qcom: move common parts for qcs8300-ride variants into a .dtsi
  • From: YijieYang <quic_yijiyang@xxxxxxxxxxx>
• [PATCH v2 3/5] arm64: dts: qcom: qcs8300-ride: enable ethernet0
  • From: YijieYang <quic_yijiyang@xxxxxxxxxxx>
• [PATCH v2 0/5] Enable ethernet for qcs8300
  • From: YijieYang <quic_yijiyang@xxxxxxxxxxx>
• [PATCH v2 2/5] arm64: dts: qcom: qcs8300: add the first 1Gb ethernet
  • From: YijieYang <quic_yijiyang@xxxxxxxxxxx>
• [PATCH v2 1/5] dt-bindings: arm: qcom: add qcs8300-ride Rev 2
  • From: YijieYang <quic_yijiyang@xxxxxxxxxxx>
• [PATCH v2 3/3] dt-bindings: net: qcom,ethqos: add description for qcs8300
  • From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
• [PATCH v2 2/3] dt-bindings: phy: describe the Qualcomm SGMII PHY
  • From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: net: qcom,ethqos: add description for qcs615
  • From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
• [PATCH v2 0/3] Add ethernet dts schema for qcs615/qcs8300
  • From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: sa8775p: Add LMH interrupts support
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH 2/3] arm64: dts: qcom: sa8775p: Add CPU OPP tables to scale DDR/L3
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH 1/3] arm64: dts: qcom: sa8775p: Add support to scale DDR/L3
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH 0/3] Add support to scale DDR and L3 on SA8775P
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: x1e80100-qcp: Add WiFi/BT pwrseq
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v1 2/4] dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v1 1/4] dt-bindings: phy: Add QMP UFS PHY comptible for QCS615
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: aoss: qcom: Document the qcs615 AOSS_QMP
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: aoss: qcom: Document the qcs615 AOSS_QMP
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH] dt-bindings: mailbox: qcom,apcs-kpss-global: correct expected clocks for fallbacks
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: mailbox: qcom,apcs-kpss-global: Document the qcs615 APSS
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: clock: Add Qualcomm SM6115 LPASS clock controller
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/3] soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 0/2] usb: typec: Add new driver for Parade PS8830 Type-C Retimer
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH] ASoC: codecs: tx-macro: correct tx_macro_component_drv name
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH v7 3/7] dt-bindings: PCI: qcom,pcie-x1e80100: Add 'global' interrupt
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: arm: qcom,coresight-static-replicator: Add property for source filtering
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [PATCH v1 2/5] arm64: dts: qcom: Add support for configuring channel TRE size
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH RFC 3/3] arm64: dts: qcom: x1e80100: Add ACD levels for GPU
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v29 01/33] xhci: support setting interrupt moderation IMOD for secondary interrupters
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH RFC 3/3] arm64: dts: qcom: x1e80100: Add ACD levels for GPU
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• Re: [PATCH v4 25/28] media: iris: implement power scaling for vpu2 and vpu3
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH RFC 2/3] dt-bindings: opp: Add v2-qcom-adreno vendor bindings
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• Re: [PATCH v2 0/2] usb: typec: Add new driver for Parade PS8830 Type-C Retimer
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: mailbox: qcom,cpucp-mbox: Add sc7280 cpucp mailbox instance
  • From: Shivnandan Kumar <quic_kshivnan@xxxxxxxxxxx>
• [PATCH v1 4/4] arm64: dts: qcom: qcs615-ride: Enable UFS node
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• [PATCH v1 3/4] arm64: dts: qcom: qcs615: add UFS node
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• [PATCH v1 2/4] dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• [PATCH v1 1/4] dt-bindings: phy: Add QMP UFS PHY comptible for QCS615
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• [PATCH v1 0/4] Enable UFS on QCS615
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• [PATCH v7 7/7] arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100
  • From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
• [PATCH v7 6/7] PCI: qcom: Disable ASPM L0s and remove BDF2SID mapping config for X1E80100 SoC
  • From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
• [PATCH v7 4/7] phy: qcom: qmp: Add phy register and clk setting for x1e80100 PCIe3
  • From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
• [PATCH v7 2/7] dt-bindings: PCI: qcom: Move OPP table to qcom,pcie-common.yaml
  • From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
• [PATCH v7 1/7] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x8
  • From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
• [PATCH v7 3/7] dt-bindings: PCI: qcom,pcie-x1e80100: Add 'global' interrupt
  • From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
• [PATCH v7 0/7] Add support for PCIe3 on x1e80100
  • From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
• [PATCH v7 5/7] PCI: qcom: Remove BDF2SID mapping config for SC8280X family SoC
  • From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
• [PATCH] arm64: dts: qcom: Add coresight nodes for QCS615
  • From: Jie Gan <quic_jiegan@xxxxxxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: qcs615: add AOSS_QMP node
  • From: Kyle Deng <quic_chunkaid@xxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: mailbox: qcom,apcs-kpss-global: Document the qcs615 APSS
  • From: Kyle Deng <quic_chunkaid@xxxxxxxxxxx>
• [PATCH 2/3] dt-bindings: aoss: qcom: Document the qcs615 AOSS_QMP
  • From: Kyle Deng <quic_chunkaid@xxxxxxxxxxx>
• [PATCH 0/3] Add aoss_qmp nodes for qcs615
  • From: Kyle Deng <quic_chunkaid@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] pinctrl: qcom: add the tlmm driver for QCS8300 platforms
  • From: Jingyi Wang <quic_jingyw@xxxxxxxxxxx>
• Re: [PATCH v4 00/28] Qualcomm iris video decoder driver
  • From: "Bryan O'Donoghue" <pure.logic@xxxxxxxxxxxxxxxxx>
• [PATCH v3 22/23] drm/msm/dpu: Reorder encoder kickoff for CWB
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v3 19/23] drm/msm/dpu: Adjust writeback phys encoder setup for CWB
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v3 16/23] drm/msm/dpu: Reserve resources for CWB
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v3 12/23] drm/msm/dpu: Add RM support for allocating CWB
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v3 05/23] drm/msm/dpu: move resource allocation to CRTC
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v3 18/23] drm/msm/dpu: Support CWB in dpu_hw_ctl
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v3 06/23] drm/msm/dpu: fill CRTC resources in dpu_crtc.c
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v3 04/23] drm/msm/dpu: switch RM to use crtc_id rather than enc_id for allocation
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v3 20/23] drm/msm/dpu: Start frame done timer after encoder kickoff
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v3 13/23] drm/msm/dpu: Add CWB to msm_display_topology
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v3 11/23] drm/msm/dpu: add CWB support to dpu_hw_wb
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v3 17/23] drm/msm/dpu: Configure CWB in writeback encoder
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v3 10/23] drm/msm/dpu: Add dpu_hw_cwb abstraction for CWB block
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v3 09/23] drm/msm/dpu: add devcoredumps for cwb registers
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v3 00/23] drm/msm/dpu: Add Concurrent Writeback Support for DPU 10.x+
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v3 23/23] drm/msm/dpu: Set possible clones for all encoders
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v3 08/23] drm/msm/dpu: Specify dedicated CWB pingpong blocks
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v3 21/23] drm/msm/dpu: Skip trigger flush and start for CWB
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v3 01/23] drm: add clone mode check for CRTC
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v3 02/23] drm: Add valid clones check
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v3 07/23] drm/msm/dpu: Add CWB entry to catalog for SM8650
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v3 03/23] drm/msm/dpu: get rid of struct dpu_rm_requirements
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v3 14/23] drm/msm/dpu: Require modeset if clone mode status changes
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v3 15/23] drm/msm/dpu: Fail atomic_check if CWB and CDM are enabled
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH v1 1/2] dt-bindings: clock: Add Qualcomm SM6115 LPASS clock controller
  • From: Alexey Klimov <alexey.klimov@xxxxxxxxxx>
• [PATCH v1 2/2] clk: qcom: Add SM6115 LPASSCC
  • From: Alexey Klimov <alexey.klimov@xxxxxxxxxx>
• [PATCH v1 0/2] Qualcomm sm6115 LPASS clock controller
  • From: Alexey Klimov <alexey.klimov@xxxxxxxxxx>
• Re: [PATCH V5 1/1] cpufreq: scmi: Register for limit change notifications
  • From: Mike Tipton <quic_mdtipton@xxxxxxxxxxx>
• [PATCH v2] ASoC: codecs: lpass-rx-macro: fix RXn(rx,n) macro for DSM_CTL and SEC7 regs
  • From: Alexey Klimov <alexey.klimov@xxxxxxxxxx>
• [PATCH] ASoC: codecs: tx-macro: correct tx_macro_component_drv name
  • From: Alexey Klimov <alexey.klimov@xxxxxxxxxx>
• Re: [PATCH v4 2/4] clk: qcom: Add CMN PLL clock controller driver for IPQ SoC
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [v8,09/12] drm/msm/a6xx: Add traces for preemption
  • From: Antonino Maniscalco <antomani103@xxxxxxxxx>
• Re: (subset) [PATCH v6 0/8] Add support for PCIe3 on x1e80100
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] clk: qcom: videocc-sm8550: depend on either gcc-sm8550 or gcc-sm8650
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] clk: qcom: videocc-sm8350: use HW_CTRL_TRIGGER for vcodec GDSCs
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8450 fix PIPE clock specification for pcie1
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v3] clk: qcom: clk-alpha-pll: Fix pll post div mask when width is not set
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v3] arm64: dts: qcom: x1e80100: Fix PCIe 6a lanes description
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: x1e80100: Add Broadcast_AND region in LLCC block
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH V6 0/5] qcom: x1e80100: Enable CPUFreq
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [v8,09/12] drm/msm/a6xx: Add traces for preemption
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH v1 2/2] arm64: dts: qcom: x1e80100-dell-xps13-9345: fix nvme regulator boot glitch
  • From: Aleksandrs Vinarskis <alex.vinarskis@xxxxxxxxx>
• [PATCH v1 1/2] arm64: dts: qcom: x1e80100-dell-xps13-9345: route edp-panel enable gpio
  • From: Aleksandrs Vinarskis <alex.vinarskis@xxxxxxxxx>
• [PATCH v1 0/2] X1E Dell XPS 9345 Improvements 1
  • From: Aleksandrs Vinarskis <alex.vinarskis@xxxxxxxxx>
• Re: [PATCH v3 04/11] KVM: guest_memfd: Allow host to mmap guest_memfd() pages when shared
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [pull] drm/msm: drm-msm-fixes-2024-10-16 for v6.12-rc4
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v2] arm64: Allow packing uncompressed images into distro packages
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: x1e80100-crd: describe HID supplies
  • From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
• Re: [PATCH] remoteproc: qcom_q6v5_mss: Re-order writes to the IMEM region
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 0/6] arm64: dts: qcom: x1e80100: fix nvme regulator boot glitch
  • From: Aleksandrs Vinarskis <alex.vinarskis@xxxxxxxxx>
• Re: [PATCH 0/6] arm64: dts: qcom: x1e80100: fix nvme regulator boot glitch
  • From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: x1e80100-qcp: Add WiFi/BT pwrseq
  • From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
• Re: [PATCH v3] arm64: dts: qcom: x1e80100-t14s: add another trackpad support
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: Drop undocumented domain "idle-state-name"
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v3] arm64: dts: qcom: sa8775p: Populate additional UART DT nodes
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v2 1/3] arm64: dts: qcom: x1e80100: enable OTG on USB-C controllers
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: x1e80100: enable GICv3 ITS for PCIe
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: x1e80100: rename vph-pwr regulator nodes
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v8 0/3] arm64: dts: qcom: extend the register range for ICE on several platforms
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [RESEND PATCH v2 0/1] Add Qualcomm Adreno 642L speedbin and update SC7280 OPPs
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v4 0/3] X1E Dell XPS 9345 support
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 0/2] arm64: dts: qcom: x1e80100: Drop orientation-switch from USB SS[0-1] QMP PHYs
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: ipq5424: Add smem and tcsr_mutex nodes
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH 2/3] soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH 0/3] Add IPQ5424 and IPQ5404 SOC IDs
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH v1 5/5] i2c: i2c-qcom-geni: Add Block event interrupt support
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH 5/6] arm64: dts: qcom: x1e80100-microsoft-romulus: fix nvme regulator boot glitch
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH 6/6] arm64: dts: qcom: x1e80100-qcp: fix nvme regulator boot glitch
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH 2/6] arm64: dts: qcom: x1e80100-crd: fix nvme regulator boot glitch
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH 3/6] arm64: dts: qcom: x1e80100-vivobook-s15: fix nvme regulator boot glitch
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH 1/6] arm64: dts: qcom: x1e78100-t14s: fix nvme regulator boot glitch
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH 4/6] arm64: dts: qcom: x1e80100-yoga-slim7x: fix nvme regulator boot glitch
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH 0/6] arm64: dts: qcom: x1e80100: fix nvme regulator boot glitch
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH 1/1] soc: qcom: socinfo: fix revision check in qcom_socinfo_probe()
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH v1 2/5] arm64: dts: qcom: Add support for configuring channel TRE size
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: Rename "Twitter" to "Tweeter"
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2] firmware: arm_scmi: fix slab-use-after-free in scmi_bus_notifier()
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH V3] arm64: dts: qcom: qcm6490-idp: Allow UFS regulators load/mode setting
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v4 2/6] thermal: of: Use scoped memory and OF handling to simplify thermal_of_trips_init()
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH] remoteproc: qcom_q6v5_pas: disable auto boot for wpss
  • From: Balaji Pothunoori <quic_bpothuno@xxxxxxxxxxx>
• Re: [PATCH v3 4/5] arm64: dts: qcom: x1e80100-crd: add rtc offset to set rtc time
  • From: Jonathan Marek <jonathan@xxxxxxxx>
• Re: [PATCH v3 1/5] rtc: pm8xxx: implement qcom,no-alarm flag for non-HLOS owned alarm
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3 1/5] rtc: pm8xxx: implement qcom,no-alarm flag for non-HLOS owned alarm
  • From: Jonathan Marek <jonathan@xxxxxxxx>
• Re: [PATCH v3 1/5] rtc: pm8xxx: implement qcom,no-alarm flag for non-HLOS owned alarm
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3 1/5] rtc: pm8xxx: implement qcom,no-alarm flag for non-HLOS owned alarm
  • From: Jonathan Marek <jonathan@xxxxxxxx>
• Re: [PATCH v3 1/5] rtc: pm8xxx: implement qcom,no-alarm flag for non-HLOS owned alarm
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [v8,09/12] drm/msm/a6xx: Add traces for preemption
  • From: Antonino Maniscalco <antomani103@xxxxxxxxx>
• Re: [PATCH V3] arm64: dts: qcom: qcm6490-idp: Allow UFS regulators load/mode setting
  • From: Rakesh Kota <quic_kotarake@xxxxxxxxxxx>
• Re: [PATCH v2 02/22] arm64: dts: qcom: add wifi node for IPQ5332 based RDP441
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 02/22] arm64: dts: qcom: add wifi node for IPQ5332 based RDP441
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 02/22] arm64: dts: qcom: add wifi node for IPQ5332 based RDP441
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 02/28] media: iris: add platform driver for iris video device
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• Re: [PATCH v2 01/22] dt-bindings: net: wireless: describe the ath12k AHB module
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH V3] arm64: dts: qcom: qcm6490-idp: Allow UFS regulators load/mode setting
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 0/4] Add GCC and RPMH clock controller for QCS615 SoC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 4/4] clk: qcom: gcc: Add support for QCS615 GCC clocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: Add X1E001DE Snapdragon Devkit for Windows
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 1/3] dt-bindings: arm: Add arm,trace-id for coresight dummy source
  • From: Mike Leach <mike.leach@xxxxxxxxxx>
• Re: [PATCH v3 14/16] net: stmmac: dwmac-s32: add basic NXP S32G/S32R glue driver
  • From: Jan Petrous <jan.petrous@xxxxxxxxxxx>
• [PATCH V3] arm64: dts: qcom: qcm6490-idp: Allow UFS regulators load/mode setting
  • From: Rakesh Kota <quic_kotarake@xxxxxxxxxxx>
• Re: [PATCH v4 02/28] media: iris: add platform driver for iris video device
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH v3 14/16] net: stmmac: dwmac-s32: add basic NXP S32G/S32R glue driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH V2] arm64: dts: qcom: qcm6490-idp: Allow UFS regulators load/mode setting
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 2/2] pinctrl: qcom: add the tlmm driver for QCS8300 platforms
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] firmware: qcom: qcom_tzmem: Implement sanity checks
  • From: Kuldeep Singh <quic_kuldsing@xxxxxxxxxxx>
• Re: [PATCH v2 01/22] dt-bindings: net: wireless: describe the ath12k AHB module
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 02/22] arm64: dts: qcom: add wifi node for IPQ5332 based RDP441
  • From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
• Re: [PATCH v2 01/22] dt-bindings: net: wireless: describe the ath12k AHB module
  • From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: x1e80100-crd: Enable external DP support
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [RFC PATCH 1/2] drm/drm_file: Add display of driver's internal memory size
  • From: Tvrtko Ursulin <tursulin@xxxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: x1e80100-crd: Enable external DP support
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH RFC 2/3] dt-bindings: opp: Add v2-qcom-adreno vendor bindings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH RFC 3/3] arm64: dts: qcom: x1e80100: Add ACD levels for GPU
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: add missing x1e80100 pipediv2 clocks
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 0/4] phy: qcom: qmp-usb: fix NULL-deref on runtime suspend
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] clk: qcom: videocc-sm8350: use HW_CTRL_TRIGGER for vcodec GDSCs
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: Rename "Twitter" to "Tweeter"
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 01/22] dt-bindings: net: wireless: describe the ath12k AHB module
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 02/22] arm64: dts: qcom: add wifi node for IPQ5332 based RDP441
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 00/22] wifi: ath12k: add Ath12k AHB driver support for IPQ5332
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: Rename "Twitter" to "Tweeter"
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3 4/5] arm64: dts: qcom: x1e80100-crd: add rtc offset to set rtc time
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3 2/5] dt-bindings: rtc: qcom-pm8xxx: document qcom,no-alarm flag
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3 1/5] rtc: pm8xxx: implement qcom,no-alarm flag for non-HLOS owned alarm
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH v5] arm64: dts: qcom: Add coresight nodes for x1e80100
  • From: Jie Gan <quic_jiegan@xxxxxxxxxxx>
• [PATCH v2] firmware: arm_scmi: fix slab-use-after-free in scmi_bus_notifier()
  • From: Xinqi Zhang <quic_xinqzhan@xxxxxxxxxxx>
• [PATCH v3 4/4] clk: qcom: gcc: Add support for QCS615 GCC clocks
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH v3 3/4] dt-bindings: clock: qcom: Add QCS615 GCC clocks
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH v3 2/4] clk: qcom: rpmhcc: Add support for QCS615 Clocks
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH v3 1/4] dt-bindings: clock: qcom-rpmhcc: Add RPMHCC bindings for QCS615
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH v3 0/4] Add GCC and RPMH clock controller for QCS615 SoC
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Add PCIe nodes
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v1 1/5] dt-bindings: dmaengine: qcom: gpi: Add additional arg to dma-cell property
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v2 4/4] clk: qcom: gcc: Add support for QCS615 GCC clocks
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: ufs: qcom: Document the QCS8300 UFS Controller
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH V3] scsi: ufs: ufs-qcom: add fixup_dev_quirks vops
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3 1/2] media: venus: Helper function for dynamically updating bitrate
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v3 2/2] media: venus: Enable h.264 hierarchical coding
  • From: Fritz Koenig <frkoenig@xxxxxxxxxxxx>
• [PATCH v29 16/33] ASoC: usb: Add PCM format check API for USB backend
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v29 22/33] ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v29 04/33] xhci: sideband: add initial api to register a sideband entity
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v29 18/33] ASoC: usb: Fetch ASoC card and pcm device information
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v29 20/33] ASoC: dt-bindings: qcom,q6dsp-lpass-ports: Add USB_RX port
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v29 07/33] usb: host: xhci-mem: Allow for interrupter clients to choose specific index
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v29 15/33] ASoC: Add SOC USB APIs for adding an USB backend
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v29 11/33] ALSA: usb-audio: Export USB SND APIs for modules
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v29 30/33] ALSA: usb-audio: qcom: Don't allow USB offload path if PCM device is in use
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v29 33/33] ASoC: usb: Rediscover USB SND devices on USB port add
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v29 29/33] ALSA: usb-audio: qcom: Introduce QC USB SND offloading support
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v29 00/33] Introduce QC USB SND audio offloading support
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v29 24/33] ASoC: qcom: qdsp6: Add USB backend ASoC driver for Q6
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v29 01/33] xhci: support setting interrupt moderation IMOD for secondary interrupters
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v29 05/33] usb: xhci: xhci-sideband: Set IMOD for xHCI sideband clients
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v29 25/33] ASoC: qcom: qdsp6: Add headphone jack for offload connection status
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v29 12/33] ALSA: usb-audio: Check for support for requested audio format
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v29 09/33] usb: dwc3: Specify maximum number of XHCI interrupters
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v29 23/33] ASoC: qcom: qdsp6: q6afe: Increase APR timeout
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v29 13/33] ALSA: usb-audio: Save UAC sample size information
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v29 06/33] usb: host: xhci-mem: Cleanup pending secondary event ring events
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v29 21/33] ASoC: dt-bindings: Update example for enabling USB offload on SM8250
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v29 10/33] ALSA: Add USB audio device jack type
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v29 28/33] ALSA: usb-audio: qcom: Add USB QMI definitions
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v29 02/33] xhci: add helper to stop endpoint and wait for completion
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v29 32/33] ALSA: usb-audio: Allow for rediscovery of connected USB SND devices
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v29 08/33] usb: host: xhci-plat: Set XHCI max interrupters if property is present
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v29 31/33] ALSA: usb-audio: Add USB offload route kcontrol
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v29 03/33] usb: host: xhci: Repurpose event handler for skipping interrupter events
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v29 26/33] ASoC: qcom: qdsp6: Fetch USB offload mapped card and PCM device
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v29 19/33] ASoC: doc: Add documentation for SOC USB
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v29 14/33] ALSA: usb-audio: Prevent starting of audio stream if in use
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v29 27/33] ALSA: usb-audio: Introduce USB SND platform op callbacks
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v29 17/33] ASoC: usb: Create SOC USB SND jack kcontrol
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v1] power: supply: Correct multiple typos in comments
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH RFC 3/3] arm64: dts: qcom: x1e80100: Add ACD levels for GPU
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• Re: [PATCH v3 1/5] rtc: pm8xxx: implement qcom,no-alarm flag for non-HLOS owned alarm
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxxxx>
• Re: [PATCH] firmware: arm_scmi: fix slab-use-after-free in scmi_bus_notifier
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxxxx>
• Re: [PATCH RFC 2/3] dt-bindings: opp: Add v2-qcom-adreno vendor bindings
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• Re: [PATCH v2 0/2] usb: typec: Add new driver for Parade PS8830 Type-C Retimer
  • From: Konrad Dybcio <konradybcio@xxxxxxxxx>
• Re: [RFC PATCH 1/2] drm/drm_file: Add display of driver's internal memory size
  • From: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
• Re: [PATCH] accel/qaic: Add crashdump to Sahara
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxxxx>
• Re: [PATCH] accel/qaic: Add crashdump to Sahara
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• [PATCH v2 22/22] wifi: ath12k: enable ath12k AHB support
  • From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
• [PATCH v2 21/22] wifi: ath12k: Power down userPD
  • From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
• [PATCH v2 20/22] wifi: ath12k: Power up userPD
  • From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
• [PATCH v2 19/22] wifi: ath12k: Register various userPD interrupts and save SMEM entries
  • From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
• [PATCH v2 18/22] wifi: ath12k: Power up root PD
  • From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
• [PATCH v2 17/22] wifi: ath12k: add AHB driver support for IPQ5332
  • From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
• [PATCH v2 16/22] wifi: ath12k: convert tasklet to BH workqueue for CE interrupts
  • From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
• [PATCH v2 15/22] wifi: ath12k: add BDF address in hardware parameter
  • From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
• [PATCH v2 14/22] wifi: ath12k: add support for fixed QMI firmware memory
  • From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
• [PATCH v2 13/22] wifi: ath12k: remap CE register space for IPQ5332
  • From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
• [PATCH v2 12/22] wifi: ath12k: fix incorrect CE addresses
  • From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
• [PATCH v2 11/22] wifi: ath12k: remap CMEM register space for IPQ5332
  • From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
• [PATCH v2 10/22] wifi: ath12k: add new CMEM read-write ath12k_hif_ops
  • From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
• [PATCH v2 09/22] wifi: ath12k: avoid m3 firmware download in AHB device IPQ5332
  • From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
• [PATCH v2 08/22] wifi: ath12k: add ath12k_hw_hal_params for IPQ5332
  • From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
• [PATCH v2 07/22] wifi: ath12k: add CE configurations for IPQ5332
  • From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
• [PATCH v2 06/22] wifi: ath12k: add ath12k_hw_ring_mask for IPQ5332
  • From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
• [PATCH v2 05/22] wifi: ath12k: add ath12k_hw_regs for IPQ5332
  • From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
• [PATCH v2 04/22] wifi: ath12k: refactor ath12k_hw_regs structure
  • From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
• [PATCH v2 03/22] wifi: ath12k: add ath12k_hw_params for IPQ5332
  • From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
• [PATCH v2 02/22] arm64: dts: qcom: add wifi node for IPQ5332 based RDP441
  • From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
• [PATCH v2 01/22] dt-bindings: net: wireless: describe the ath12k AHB module
  • From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
• [PATCH v2 00/22] wifi: ath12k: add Ath12k AHB driver support for IPQ5332
  • From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
• Re: [PATCH 00/10] remoteproc: few dev_err_probe() and other cleanups/improvements
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: Rename "Twitter" to "Tweeter"
  • From: Maya Matuszczyk <maccraft123mc@xxxxxxxxx>
• Re: [PATCH v11 4/8] mtd: nand: Add qpic_common API file
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• Re: [PATCH v3] drm/display: Drop obsolete dependency on COMPILE_TEST
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v11 1/8] spi: dt-bindings: Introduce qcom,spi-qpic-snand
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v11 4/8] mtd: nand: Add qpic_common API file
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: Add X1E001DE Snapdragon Devkit for Windows
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: x1e80100-crd: describe HID supplies
  • From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
• Re: Working on audio for qcom apq8098 / msm8998
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH V2] arm64: dts: qcom: qcm6490-idp: Allow UFS regulators load/mode setting
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH v4 4/4] arm64: dts: qcom: Add CMN PLL node for IPQ9574 SoC
  • From: Luo Jie <quic_luoj@xxxxxxxxxxx>
• [PATCH v4 3/4] arm64: defconfig: Enable Qualcomm IPQ CMN PLL clock controller
  • From: Luo Jie <quic_luoj@xxxxxxxxxxx>
• [PATCH v4 2/4] clk: qcom: Add CMN PLL clock controller driver for IPQ SoC
  • From: Luo Jie <quic_luoj@xxxxxxxxxxx>
• [PATCH v4 1/4] dt-bindings: clock: qcom: Add CMN PLL clock controller for IPQ SoC
  • From: Luo Jie <quic_luoj@xxxxxxxxxxx>
• [PATCH v4 0/4] Add CMN PLL clock controller driver for IPQ9574
  • From: Luo Jie <quic_luoj@xxxxxxxxxxx>
• Re: [PATCH v1 1/5] dt-bindings: dmaengine: qcom: gpi: Add additional arg to dma-cell property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: Add X1E001DE Snapdragon Devkit for Windows
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: Add X1E001DE Snapdragon Devkit for Windows
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [RESEND PATCH v2 1/1] arm64: dts: qcom: sc7280: Add 0x81 Adreno speed bin
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: x1e80100-crd: describe HID supplies
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH V2] arm64: dts: qcom: qcm6490-idp: Allow UFS regulators load/mode setting
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 2/5] arm64: dts: qcom: Add support for configuring channel TRE size
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v1 1/5] dt-bindings: dmaengine: qcom: gpi: Add additional arg to dma-cell property
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v1 1/5] dt-bindings: dmaengine: qcom: gpi: Add additional arg to dma-cell property
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: x1e80100-crd: describe HID supplies
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH V2] arm64: dts: qcom: qcm6490-idp: Allow UFS regulators load/mode setting
  • From: Rakesh Kota <quic_kotarake@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: x1e80100: rename vph-pwr regulator nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 0/2] usb: typec: Add new driver for Parade PS8830 Type-C Retimer
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH v2 2/2] usb: typec: Add support for Parade PS8830 Type-C Retimer
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] firmware: arm_scmi: fix slab-use-after-free in scmi_bus_notifier
  • From: Cristian Marussi <cristian.marussi@xxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: usb: Add Parade PS8830 Type-C retimer bindings
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: Don't always set merge_3d pending flush
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] drm/msm/dpu: don't always activate merge_3d block
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] drm/msm/dpu: don't always activate merge_3d block
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 0/2] usb: typec: Add new driver for Parade PS8830 Type-C Retimer
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: x1e80100: rename vph-pwr regulator nodes
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH 3/3] arm64: dts: qcom: x1e80100-qcp: Add WiFi/BT pwrseq
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] phy: qcom: qmp-pcie: drop bogus x1e80100 qref supplies
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v4 27/28] media: iris: enable video driver probe of SM8250 SoC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 3/4] firmware: psci: Read and use vendor reset types
  • From: Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx>
• Re: [PATCH v2 09/14] drm/msm/dpu: blend pipes per mixer pairs config
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: x1e80100: rename vph-pwr regulator nodes
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• Re: [PATCH v4 0/5] Add support for DisplayPort on SA8775P platform
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] arm64: dts: x1e80100-crd: describe HID supplies
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH] phy: qcom: qmp-pcie: drop bogus x1e80100 qref supplies
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH v1 5/5] i2c: i2c-qcom-geni: Add Block event interrupt support
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• [PATCH v1 4/5] dmaengine: qcom: gpi: Add GPI Block event interrupt support
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• [PATCH v1 3/5] dmaengine: qcom: gpi: Add provision to support TRE size as the fourth argument of dma-cells property
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• [PATCH v1 2/5] arm64: dts: qcom: Add support for configuring channel TRE size
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• [PATCH v1 1/5] dt-bindings: dmaengine: qcom: gpi: Add additional arg to dma-cell property
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• [PATCH v1 0/5] Add Block event interrupt support for I2C protocol
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• Re: [PATCH v4 08/28] media: iris: implement power management
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v4 08/28] media: iris: implement power management
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 1/3] dm-inlinecrypt: Add inline encryption support
  • From: Mikulas Patocka <mpatocka@xxxxxxxxxx>
• [PATCH] firmware: arm_scmi: fix slab-use-after-free in scmi_bus_notifier
  • From: Xinqi Zhang <quic_xinqzhan@xxxxxxxxxxx>
• Re: [PATCH v3 06/11] KVM: guest_memfd: Add KVM capability to check if guest_memfd is host mappable
  • From: Fuad Tabba <tabba@xxxxxxxxxx>
• Re: [PATCH v3 06/11] KVM: guest_memfd: Add KVM capability to check if guest_memfd is host mappable
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH v3 04/11] KVM: guest_memfd: Allow host to mmap guest_memfd() pages when shared
  • From: Fuad Tabba <tabba@xxxxxxxxxx>
• Re: [PATCH v2 1/2] firmware: qcom: scm: Return -EOPNOTSUPP for unsupported SHM bridge enabling
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• Re: [PATCH v2 0/4] Add support for APPS SMMU on QCS615
  • From: Qingqing Zhou <quic_qqzhou@xxxxxxxxxxx>
• Re: [PATCH v4 27/28] media: iris: enable video driver probe of SM8250 SoC
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: firmware: qcom,scm: document QCS615 SCM
  • From: Qingqing Zhou <quic_qqzhou@xxxxxxxxxxx>
• [PATCH] firmware: arm_scmi: fix slab-use-after-free in scmi_bus_notifier
  • From: Xinqi Zhang <quic_xinqzhan@xxxxxxxxxxx>
• Re: [PATCH v2 09/14] drm/msm/dpu: blend pipes per mixer pairs config
  • From: Jun Nie <jun.nie@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: firmware: qcom,scm: document QCS615 SCM
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 0/4] Add support for APPS SMMU on QCS615
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 4/4] arm64: dts: qcom: qcs615: add the APPS SMMU node
  • From: Qingqing Zhou <quic_qqzhou@xxxxxxxxxxx>
• [PATCH v2 3/4] arm64: dts: qcom: qcs615: add the SCM node
  • From: Qingqing Zhou <quic_qqzhou@xxxxxxxxxxx>
• [PATCH v2 2/4] dt-bindings: arm-smmu: document QCS615 APPS SMMU
  • From: Qingqing Zhou <quic_qqzhou@xxxxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: firmware: qcom,scm: document QCS615 SCM
  • From: Qingqing Zhou <quic_qqzhou@xxxxxxxxxxx>
• [PATCH v2 0/4] Add support for APPS SMMU on QCS615
  • From: Qingqing Zhou <quic_qqzhou@xxxxxxxxxxx>
• Re: [PATCH v4 00/28] Qualcomm iris video decoder driver
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• Re: [PATCH 3/3] dt-bindings: net: qcom,ethqos: add description for qcs8300
  • From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
• Re: [PATCH v4 0/5] Add support for DisplayPort on SA8775P platform
  • From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
• Re: [PATCH v4 5/5] drm/msm/dp: Add DisplayPort controller for SA8775P
  • From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
• Re: [PATCH 3/3] dt-bindings: net: qcom,ethqos: add description for qcs8300
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/5] dt-bindings: phy: qcom,qusb2: Add bindings for QCS615
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 3/5] dt-bindings: phy: qcom,msm8998-qmp-usb3-phy: Add support for QCS615
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: usb: qcom,dwc3: Add QCS615 to USB DWC3 bindings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 3/3] dt-bindings: net: qcom,ethqos: add description for qcs8300
  • From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
• Re: [PATCH v3 2/5] dt-bindings: rtc: qcom-pm8xxx: document qcom,no-alarm flag
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v6 6/8] PCI: qcom: Fix the ops for SC8280X family SoC
  • From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
• Re: [PATCH v28 00/33] Introduce QC USB SND audio offloading support
  • From: "Christopher Snowhill" <kode54@xxxxxxxxx>
• [PATCH v3 5/5] arm64: dts: qcom: x1e78100-t14s: add rtc offset to set rtc time
  • From: Jonathan Marek <jonathan@xxxxxxxx>
• [PATCH v3 3/5] arm64: dts: qcom: x1e80100-pmics: enable RTC
  • From: Jonathan Marek <jonathan@xxxxxxxx>
• [PATCH v3 4/5] arm64: dts: qcom: x1e80100-crd: add rtc offset to set rtc time
  • From: Jonathan Marek <jonathan@xxxxxxxx>
• [PATCH v3 2/5] dt-bindings: rtc: qcom-pm8xxx: document qcom,no-alarm flag
  • From: Jonathan Marek <jonathan@xxxxxxxx>
• [PATCH v3 1/5] rtc: pm8xxx: implement qcom,no-alarm flag for non-HLOS owned alarm
  • From: Jonathan Marek <jonathan@xxxxxxxx>
• [PATCH v3 0/5] x1e80100 RTC support
  • From: Jonathan Marek <jonathan@xxxxxxxx>
• Re: [PATCH v6 2/2] gcc-sdm845: Add general purpose clock ops
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] accel/qaic: Add crashdump to Sahara
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 05/16] net: dwmac-dwc-qos-eth: Use helper rgmii_clock
  • From: Jan Petrous <jan.petrous@xxxxxxxxxxx>
• Re: [PATCH v3 4/4] i2c: i2c-qcom-geni: Enable i2c controller sharing between two subsystems
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: Don't always set merge_3d pending flush
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCH v2] drm/msm/dpu: don't always activate merge_3d block
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [RESEND PATCH v2 1/1] arm64: dts: qcom: sc7280: Add 0x81 Adreno speed bin
  • From: Danila Tikhonov <danila@xxxxxxxxxxx>
• [RESEND PATCH v2 0/1] Add Qualcomm Adreno 642L speedbin and update SC7280 OPPs
  • From: Danila Tikhonov <danila@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] drm/msm/dsi: improve/fix dsc pclk calculation
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] drm/msm/dsi: fix 32-bit signed integer extension in pclk_rate calculation
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/hdmi: drop pll_cmp_to_fdata from hdmi_phy_8998
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 3/3] drm/msm: Simplify NULL checking in msm_disp_state_dump_regs()
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 2/3] drm/msm: Allocate memory for disp snapshot with kvzalloc()
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 1/3] drm/msm: Avoid NULL dereference in msm_disp_state_print_regs()
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v3 2/4] dma: gpi: Add Lock and Unlock TRE support to access SE exclusively
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: x1e80100: Force host dr_mode for usb_2 controller
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH v2 2/5] dt-bindings: rtc: qcom-pm8xxx: document no-alarm flag
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v6 7/8] PCI: qcom: Fix the cfg for X1E80100 SoC
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v6 6/8] PCI: qcom: Fix the ops for SC8280X family SoC
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v28 00/33] Introduce QC USB SND audio offloading support
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v3 04/11] KVM: guest_memfd: Allow host to mmap guest_memfd() pages when shared
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH 3/3] drm/msm: Simplify NULL checking in msm_disp_state_dump_regs()
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 2/3] drm/msm: Allocate memory for disp snapshot with kvzalloc()
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 1/3] drm/msm: Avoid NULL dereference in msm_disp_state_print_regs()
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH] arm64: dts: qcom: Drop undocumented domain "idle-state-name"
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/2] firmware: qcom: scm: Return -EOPNOTSUPP for unsupported SHM bridge enabling
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 1/2] firmware: qcom: scm: Return -EOPNOTSUPP for unsupported SHM bridge enabling
  • From: Kuldeep Singh <quic_kuldsing@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: x1e80100: Force host dr_mode for usb_2 controller
  • From: neil.armstrong@xxxxxxxxxx
• [PATCH] clk: qcom: gcc-x1e80100: Fix USB MP SS1 PHY GDSC pwrsts flags
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: x1e80100: Force host dr_mode for usb_2 controller
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH v2 2/5] dt-bindings: rtc: qcom-pm8xxx: document no-alarm flag
  • From: Jonathan Marek <jonathan@xxxxxxxx>
• Re: [PATCH v4 27/28] media: iris: enable video driver probe of SM8250 SoC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 0/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for Windows Dev Kit 2023
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v2 0/5] x1e80100 RTC support
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v4 27/28] media: iris: enable video driver probe of SM8250 SoC
  • From: Jianhua Lu <lujianhua000@xxxxxxxxx>
• [PATCH v2 2/2] ARM: implement cacheinfo support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 1/2] ARM: add CLIDR accessor functions
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 0/2] ARM: implement cacheinfo support (for v7/v7m)
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 05/16] net: dwmac-dwc-qos-eth: Use helper rgmii_clock
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v3 04/16] net: phy: Add helper for mapping RGMII link speed to clock rate
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2 2/5] dt-bindings: rtc: qcom-pm8xxx: document no-alarm flag
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v6 3/8] dt-bindings: PCI: qcom,pcie-x1e80100: Add 'global' interrupt
  • From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
• Re: [PATCH v6 3/8] dt-bindings: PCI: qcom,pcie-x1e80100: Add 'global' interrupt
  • From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] firmware: qcom: qcom_tzmem: Implement sanity checks
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 1/2] firmware: qcom: scm: Return -EOPNOTSUPP for unsupported SHM bridge enabling
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 2/2] soc: qcom: rmtfs: constify rmtfs_class
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 1/2] soc: qcom: rmtfs: allow building the module with COMPILE_TEST=y
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 2/5] dt-bindings: rtc: qcom-pm8xxx: document no-alarm flag
  • From: Jonathan Marek <jonathan@xxxxxxxx>
• Re: [PATCH 6/6] remoteproc: qcom: Enable map/unmap and SHM bridge support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 6/6] remoteproc: qcom: Enable map/unmap and SHM bridge support
  • From: Shiraz Hashim <quic_shashim@xxxxxxxxxxx>
• Re: [PATCH 6/6] remoteproc: qcom: Enable map/unmap and SHM bridge support
  • From: Shiraz Hashim <quic_shashim@xxxxxxxxxxx>
• Re: Working on audio for qcom apq8098 / msm8998
  • From: Marc Gonzalez <mgonzalez@xxxxxxxxxx>
• Re: [PATCH 0/6] add_display_support_for_QCS615
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 01/28] dt-bindings: media: Add video support for QCOM SM8550 SoC
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 00/28] Qualcomm iris video decoder driver
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 5/6] dt-bindings: display/msm: Add QCS615 MDSS & DPU
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 4/6] dt-bindings: display/msm: Add QCS615 DSI phy
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 2/2] firmware: qcom: qcom_tzmem: Implement sanity checks
  • From: Kuldeep Singh <quic_kuldsing@xxxxxxxxxxx>
• [PATCH v2 1/2] firmware: qcom: scm: Return -EOPNOTSUPP for unsupported SHM bridge enabling
  • From: Kuldeep Singh <quic_kuldsing@xxxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: x1e80100-vivobook-s15: Drop orientation-switch from USB SS[0-1] QMP PHYs
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH 1/2] arm64: dts: qcom: x1e80100-slim7x: Drop orientation-switch from USB SS[0-1] QMP PHYs
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH 0/2] arm64: dts: qcom: x1e80100: Drop orientation-switch from USB SS[0-1] QMP PHYs
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v2 0/2] qcom_tzmem: Enhance Error Handling for shmbridge
  • From: Kuldeep Singh <quic_kuldsing@xxxxxxxxxxx>
• Re: [PATCH 5/5] phy: qcom: qmp-usbc: Add qmp configuration for QCS615
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>