Linux ARM MSM

• Thread Index

• [PATCH 4/4] arm64: dts: qcom: ipq5424: configure spi0 node for rdp466
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH 3/4] arm64: dts: qcom: ipq5424: add spi0 node
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH 2/4] pinctrl: qcom: ipq5424: split spi0 pin group
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: pinctrl: qcom: update spi0 function
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH 0/4] Add SPI0 support for IPQ5424
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH v3] i2c: i2c-qcom-geni: Serve transfer during early resume stage
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 1/2] arm64: dts: qcom: qcs615: add SDHC1 and SDHC2
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v8 3/7] thermal/drivers/tsens: Add TSENS enable and calibration support for V2
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: qcs615-ride: Enable ethernet node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/msm: UAPI error reporting
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] soc: qcom: llcc: Update configuration data for IPQ5424
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] mm: guestmem: Convert address_space operations to guestmem library
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sa8775p: pmic: enable rtc
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/2] clk: qcom: videocc: Use HW_CTRL_TRIGGER flag for video GDSC's
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sa8775p: pmic: enable rtc
  • From: Tingguo Cheng <quic_tingguoc@xxxxxxxxxxx>
• [PATCH 2/2] venus: pm_helpers: Use dev_pm_genpd_set_hwmode to switch GDSC mode on V4
  • From: Renjiang Han <quic_renjiang@xxxxxxxxxxx>
• [PATCH 1/2] clk: qcom: videocc: Use HW_CTRL_TRIGGER flag for video GDSC's
  • From: Renjiang Han <quic_renjiang@xxxxxxxxxxx>
• [PATCH 0/2] Use APIs in gdsc genpd to switch gdsc mode for venus v4 core
  • From: Renjiang Han <quic_renjiang@xxxxxxxxxxx>
• Re: [PATCH v3 8/9] arm64: dts: qcom: Add display support for QCS615
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 9/9] arm64: dts: qcom: Add display support for QCS615 RIDE board
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 7/9] drm/msm/dsi: Add support for SM6150
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 6/9] drm/msm/dsi: Add dsi phy support for SM6150
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 5/9] drm/msm/dpu: Add SM6150 support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 4/9] drm/msm: mdss: Add SM6150 support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 9/9] arm64: dts: qcom: Add display support for QCS615 RIDE board
  • From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
• [PATCH v3 8/9] arm64: dts: qcom: Add display support for QCS615
  • From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
• [PATCH v3 7/9] drm/msm/dsi: Add support for SM6150
  • From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
• [PATCH v3 6/9] drm/msm/dsi: Add dsi phy support for SM6150
  • From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
• [PATCH v3 5/9] drm/msm/dpu: Add SM6150 support
  • From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
• [PATCH v3 4/9] drm/msm: mdss: Add SM6150 support
  • From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
• [PATCH v3 3/9] dt-bindings: display/msm: Add SM6150 MDSS & DPU
  • From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
• [PATCH v3 2/9] dt-bindings: display/msm: dsi-controller-main: Document SM6150
  • From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
• [PATCH v3 1/9] dt-bindings: display/msm: Add SM6150 DSI phy
  • From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
• [PATCH v3 0/9] Add display support for QCS615 platform
  • From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
• Re: [PATCH v4 1/2] init/Kconfig: add python3 availability config
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] ASoC: qcom: apq8016_sbc: Fix second argument of apq8016_dai_init()
  • From: Bert Karwatzki <spasswolf@xxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: x1e80100-romulus: Set up PCIe3 / SDCard reader
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: x1e80100-romulus: Set up PS8830s
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 3/6] dt-bindings: PCI: qcom: Document the QCS615 PCIe Controller
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/6] phy: qcom: qmp: Add phy register and clk setting for QCS615 PCIe
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: qcs615: add the GPU SMMU node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 1/3] mtd: rawnand: qcom: Pass 18 bit offset from QPIC base address to BAM
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v2 3/3] mtd: rawnand: qcom: Fix read len for onfi param page
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v2 2/3] mtd: rawnand: qcom: Fix onfi param page read
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v2 0/3] QPIC v2 fixes for SDX75
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH 2/2] remoteproc: qcom: pas: Add SM8750 MPSS
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: remoteproc: Add SM8750 MPSS and CDSP
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/2] interconnect: qcom: sdx75: Drop QP0 related interconnect and BCM nodes
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 1/2] arm64: dts: qcom: qcs615: add SDHC1 and SDHC2
  • From: Yuanjie Yang <quic_yuanjiey@xxxxxxxxxxx>
• Re: [PATCH V4 0/5] arm_scmi: vendors: Qualcomm Generic Vendor Extensions
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 1/6] arm64: defconfig: Enable SX150X
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: bluetooth: Add qca6698 compatible string
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/3] arm64: dts: qcom: qcs8300: Add watchdog node
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• Re: [PATCH 1/6] arm64: defconfig: Enable SX150X
  • From: fange zhang <quic_fangez@xxxxxxxxxxx>
• Re: [PATCH 1/6] arm64: defconfig: Enable SX150X
  • From: fange zhang <quic_fangez@xxxxxxxxxxx>
• [PATCH v1] mmc: sdhci-msm: Correctly set the load for the regulator
  • From: Yuanjie Yang <quic_yuanjiey@xxxxxxxxxxx>
• Re: [PATCH v3] i2c: i2c-qcom-geni: Serve transfer during early resume stage
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: qcs615: add the GPU SMMU node
  • From: Qingqing Zhou <quic_qqzhou@xxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: arm-smmu: document QCS615 GPU SMMU
  • From: Qingqing Zhou <quic_qqzhou@xxxxxxxxxxx>
• [PATCH 0/2] Add support for GPU SMMU on QCS615
  • From: Qingqing Zhou <quic_qqzhou@xxxxxxxxxxx>
• [PATCH V4 0/2] Enable TRNG for QCS8300
  • From: Yuvaraj Ranganathan <quic_yrangana@xxxxxxxxxxx>
• Re: [PATCH 3/6] drm/msm/dpu: Add QCS615 support
  • From: fange zhang <quic_fangez@xxxxxxxxxxx>
• [PATCH V4 1/2] dt-bindings: crypto: qcom,prng: document QCS8300
  • From: Yuvaraj Ranganathan <quic_yrangana@xxxxxxxxxxx>
• [PATCH V4 2/2] arm64: dts: qcom: qcs8300: add TRNG node
  • From: Yuvaraj Ranganathan <quic_yrangana@xxxxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the QCS615 QMP PCIe PHY Gen3 x1
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 3/6] drm/msm/dpu: Add QCS615 support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/6] drm/msm/dpu: Add QCS615 support
  • From: fange zhang <quic_fangez@xxxxxxxxxxx>
• Re: [PATCH V5 1/4] dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH V5 4/4] interconnect: qcom: osm-l3: Add epss compatibles for SA8775P SoC
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• Re: [PATCH v2 4/4] Bluetooth: hci_qca: add qcom,product-variant properties
  • From: "Cheng Jiang (IOE)" <quic_chejiang@xxxxxxxxxxx>
• Re: [PATCH V5 3/4] interconnect: qcom: Add EPSS L3 support on SA8775P
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• [PATCH] dmaengine: qcom: bam_dma: Avoid writing unavailable register
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• Re: [PATCH V5 1/4] dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• Re: [PATCH v2 3/6] dt-bindings: PCI: qcom: Document the QCS615 PCIe Controller
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 1/2] arm64: dts: qcom: qcs615: add SDHC1 and SDHC2
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 1/2] arm64: dts: qcom: qcs615: add SDHC1 and SDHC2
  • From: Yuanjie Yang <quic_yuanjiey@xxxxxxxxxxx>
• [PATCH v3 0/2] Enable SDHC1 and SDHC2 on QCS615
  • From: Yuanjie Yang <quic_yuanjiey@xxxxxxxxxxx>
• [PATCH v3 2/2] arm64: dts: qcom: qcs615-ride: enable SDHC1 and SDHC2
  • From: Yuanjie Yang <quic_yuanjiey@xxxxxxxxxxx>
• [PATCH v3 2/3] arm64: dts: qcom: qcs615: add UFS node
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• [PATCH v3 3/3] arm64: dts: qcom: qcs615-ride: Enable UFS node
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• [PATCH v3 0/3] Enable UFS on QCS615
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• Re: [PATCH v2 2/3] arm64: dts: qcom: qcs615: add UFS node
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcs9100: Update memory map for QCS9100 Ride and QCS9100 Ride Rev3
  • From: Kuldeep Singh <quic_kuldsing@xxxxxxxxxxx>
• [PATCH v2 5/6] arm64: dts: qcom: qcs615: enable pcie for qcs615 soc
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• [PATCH v2 1/6] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the QCS615 QMP PCIe PHY Gen3 x1
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• [PATCH v2 3/6] dt-bindings: PCI: qcom: Document the QCS615 PCIe Controller
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• [PATCH v2 0/6] pci: qcom: Add QCS615 PCIe support
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• [PATCH v2 2/6] phy: qcom: qmp: Add phy register and clk setting for QCS615 PCIe
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• [PATCH v2 4/6] PCI: qcom: Add QCS615 PCIe support
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• [PATCH v2 6/6] arm64: dts: qcom: qcs615: enable pcie for qcs615 platform dts
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: bluetooth: Add qca6698 compatible string
  • From: quic_zijuhu <quic_zijuhu@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: usb: qcom,dwc3: Make ss_phy_irq optional for X1E80100
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: x1e80100-romulus: Set up PS8830s
  • From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
• [PATCH 2/3] arm64: dts: qcom: x1e80100-romulus: Set up PCIe3 / SDCard reader
  • From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
• [PATCH 1/3] arm64: dts: qcom: x1e80100-romulus: Configure audio
  • From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
• [PATCH 0/3] More Surface Laptop 7 features
  • From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
• [PATCH] media: qcom: camss: fix VFE pm domain off
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v2 5/6] arm64: dts: qcom: qcs615: enable pcie for qcs615 soc
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• [PATCH v2 2/6] phy: qcom: qmp: Add phy register and clk setting for QCS615 PCIe
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• [PATCH v2 0/6] pci: qcom: Add QCS615 PCIe support
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• [PATCH v2 1/6] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the QCS615 QMP PCIe PHY Gen3 x1
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• [PATCH v2 3/6] dt-bindings: PCI: qcom: Document the QCS615 PCIe Controller
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• [PATCH v2 6/6] arm64: dts: qcom: qcs615: enable pcie for qcs615 platform dts
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• [PATCH v2 4/6] PCI: qcom: Add QCS615 PCIe support
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• [no subject]
  • From: Unknown
• Re: [PATCH v2 2/4] dt-bindings: bluetooth: Add qca6698 compatible string
  • From: "Cheng Jiang (IOE)" <quic_chejiang@xxxxxxxxxxx>
• Re: [PATCH 0/3] Add standalone ethernet MAC entries for qcs615
  • From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: net: qcom,ethqos: revise description for qcs615
  • From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
• Re: [PATCH RFC 3/3] tee: introduce orphan tee_shm and default context
  • From: Amirreza Zarrabi <quic_azarrabi@xxxxxxxxxxx>
• Re: [PATCH] net: qrtr: mhi: synchronize qrtr and mhi preparation
  • From: Chris Lew <quic_clew@xxxxxxxxxxx>
• Re: [PATCH net-next v2] net: wwan: Add WWAN sahara port type
  • From: Sergey Ryazanov <ryazanov.s.a@xxxxxxxxx>
• Re: [PATCH 1/2] clk: qcom: common: Add support for power-domain attachment
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH net-next v2] net: wwan: Add WWAN sahara port type
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH net-next v2] net: wwan: Add WWAN sahara port type
  • From: Sergey Ryazanov <ryazanov.s.a@xxxxxxxxx>
• Re: [PATCH net-next v2] net: wwan: Add WWAN sahara port type
  • From: Sergey Ryazanov <ryazanov.s.a@xxxxxxxxx>
• Re: [PATCH v3 2/6] arm64: dts: qcom: qcs6490-rb3gen2: Add node for qps615
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 1/2] init/Kconfig: add python3 availability config
  • From: Masahiro Yamada <masahiroy@xxxxxxxxxx>
• Re: [PATCH v2 03/11] drm/msm: adreno: move features bits in a separate variable
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] phy: qcom-qusb2: Add regulator_set_load to Qualcomm usb phy
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 2/2] misc: fastrpc: Rename tgid and pid to client_id
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 1/2] misc: fastrpc: Add support for multiple PD from one process
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 1/2] init/Kconfig: add python3 availability config
  • From: Masahiro Yamada <masahiroy@xxxxxxxxxx>
• Re: [PATCH V5 3/4] interconnect: qcom: Add EPSS L3 support on SA8775P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 3/3] i2c: i2c-qcom-geni: Update compile dependenices for I2C GENI driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 1/1] spi: spi-geni-qcom: Add immediate DMA support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/2] interconnect: qcom: sdx75: Drop QP0 related interconnect and BCM nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: interconnect: qcom: drop QPIC_CORE IDs
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/2] clk: qcom: common: Add support for power-domain attachment
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/3] PCI: dwc: Add ECAM support with iATU configuration
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v30 02/30] xhci: sec-intr: add initial api to register a secondary interrupter entity
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v2 04/11] drm/msm: adreno: add GMU_BW_VOTE feature flag
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v2 04/11] drm/msm: adreno: add GMU_BW_VOTE feature flag
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v2 03/11] drm/msm: adreno: move features bits in a separate variable
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v30 02/30] xhci: sec-intr: add initial api to register a secondary interrupter entity
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 4/4] misc: fastrpc: Add debugfs support for fastrpc
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcs9100: Update memory map for QCS9100 Ride and QCS9100 Ride Rev3
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: qcs8300-ride: Add watchdog node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 05/11] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 04/11] drm/msm: adreno: add GMU_BW_VOTE feature flag
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 03/11] drm/msm: adreno: move features bits in a separate variable
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 4/4] Bluetooth: hci_qca: add qcom,product-variant properties
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 2/3] soc: qcom: llcc: Update configuration data for IPQ5424
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH V5 3/4] interconnect: qcom: Add EPSS L3 support on SA8775P
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• Re: [PATCH V5 2/4] arm64: dts: qcom: sa8775p: add EPSS l3 interconnect provider
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH V5 1/4] dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH V5 2/4] arm64: dts: qcom: sa8775p: add EPSS l3 interconnect provider
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• Re: [PATCH V5 1/4] dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• Re: [PATCH v4 2/2] mm: guestmem: Convert address_space operations to guestmem library
  • From: Mike Day <michael.day@xxxxxxx>
• Re: [PATCH 1/2] dt-bindings: interconnect: qcom: drop QPIC_CORE IDs
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 2/2] interconnect: qcom: sdx75: Drop QP0 related interconnect and BCM nodes
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: interconnect: qcom: drop QPIC_CORE IDs
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• [PATCH 0/2] Drop QPIC related interconnect and BCM nodes on
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: Enable Primary USB controller on QCS615 Ride
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/2] arm64: dts: qcom: Add support for usb node on QCS615
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 16/16] net: stmmac: platform: Fix PTP clock rate reading
  • From: Jan Petrous <jan.petrous@xxxxxxxxxxx>
• Re: [PATCH v2 2/3] arm64: dts: qcom: qcs615: add UFS node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/3] arm64: dts: qcom: qcs615: add UFS node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] drm/msm: UAPI error reporting
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v4 2/2] mm: guestmem: Convert address_space operations to guestmem library
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: bluetooth: Add qca6698 compatible string
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: bluetooth: Add qca6698 compatible string
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: bluetooth: add 'qcom,product-variant'
  • From: "Cheng Jiang (IOE)" <quic_chejiang@xxxxxxxxxxx>
• Re: [PATCH v30 28/30] ALSA: usb-audio: Add USB offload route kcontrol
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH] ASoC: qcom: apq8016_sbc: Fix second argument of apq8016_dai_init()
  • From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
• Re: [PATCH] ASoC: qcom: apq8016_sbc: Fix second argument of apq8016_dai_init()
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v1 4/4] misc: fastrpc: Add debugfs support for fastrpc
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 3/3] i2c: i2c-qcom-geni: Update compile dependenices for I2C GENI driver
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• [PATCH v3 2/3] i2c: i2c-qcom-geni: Add Block event interrupt support
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• [PATCH v3 1/3] dmaengine: qcom: gpi: Add GPI Block event interrupt support
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• [PATCH v3 0/3] Add Block event interrupt support for I2C protocol
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• Re: [PATCH v2 RESEND 3/3] i2c: i2c-qcom-geni: Add Block event interrupt support
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• Re: [PATCH 2/3] PCI: dwc: Add ECAM support with iATU configuration
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 RESEND 1/3] dmaengine: qcom: gpi: Add GPI Block event interrupt support
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• Re: [PATCH v2 RESEND 2/3] i2c: qcom_geni: Update compile dependenices for qcom geni
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• Re: [PATCH v2 RESEND 1/3] dmaengine: qcom: gpi: Add GPI Block event interrupt support
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• Re: [PATCH v4 1/2] filemap: Pass address_space mapping to ->free_folio()
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH RFC 3/3] tee: introduce orphan tee_shm and default context
  • From: Jens Wiklander <jens.wiklander@xxxxxxxxxx>
• Re: [PATCH v1 0/1] Add immediate DMA support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: qcs8300-ride: Add watchdog node
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• Re: [PATCH V5 3/4] interconnect: qcom: Add EPSS L3 support on SA8775P
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH V5 2/4] arm64: dts: qcom: sa8775p: add EPSS l3 interconnect provider
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH V5 1/4] dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v1 1/1] spi: spi-geni-qcom: Add immediate DMA support
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• [PATCH v1 0/1] Add immediate DMA support
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• Re: [PATCH V5 4/4] interconnect: qcom: osm-l3: Add epss compatibles for SA8775P SoC
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcs9100: Update memory map for QCS9100 Ride and QCS9100 Ride Rev3
  • From: Pratyush Brahma <quic_pbrahma@xxxxxxxxxxx>
• [PATCH V5 4/4] interconnect: qcom: osm-l3: Add epss compatibles for SA8775P SoC
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• [PATCH V5 3/4] interconnect: qcom: Add EPSS L3 support on SA8775P
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• [PATCH V5 2/4] arm64: dts: qcom: sa8775p: add EPSS l3 interconnect provider
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• [PATCH V5 1/4] dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• [PATCH V5 0/4] Add EPSS L3 provider support on SA8775P SoC
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• Re: [PATCH RFC 0/2] Avoid reprogram all keys to Inline Crypto Engine for MMC runtime suspend resume
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: qcs8300-ride: Add watchdog node
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: qcs8300-ride: Add watchdog node
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: media: Add qcom,x1e80100-camss binding
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 8/9] arm64: dts: qcom: Add display support for QCS615 RIDE board
  • From: fange zhang <quic_fangez@xxxxxxxxxxx>
• Re: [PATCH v2 6/9] drm/msm/dsi: Add support for QCS615
  • From: fange zhang <quic_fangez@xxxxxxxxxxx>
• Re: [PATCH v2 6/9] drm/msm/dsi: Add support for QCS615
  • From: fange zhang <quic_fangez@xxxxxxxxxxx>
• Re: [PATCH 5/6] dt-bindings: display/msm: Add QCS615 MDSS & DPU
  • From: fange zhang <quic_fangez@xxxxxxxxxxx>
• [PATCH v5 1/2] arm64: dts: qcom: sa8775p: add DisplayPort device nodes
  • From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
• [PATCH v5 0/2] Enable Display Port for Qualcomm SA8775P-ride platform
  • From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
• [PATCH v5 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
  • From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
• Re: [PATCH net-next v2] net: wwan: Add WWAN sahara port type
  • From: Loic Poulain <loic.poulain@xxxxxxxxxx>
• Re: [PATCH 1/2] mtd: rawnand: qcom: Pass 18 bit offset from QPIC base address to BAM
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v4 2/2] misc: fastrpc: Rename tgid and pid to client_id
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v4 1/2] misc: fastrpc: Add support for multiple PD from one process
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v4 0/2] Add changes to use session index as identifier
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• [PATCH v2] phy: qcom-qusb2: Add regulator_set_load to Qualcomm usb phy
  • From: Song Xue <quic_songxue@xxxxxxxxxxx>
• [PATCH] phy: qcom-qusb2: Add regulator_set_load to Qualcomm usb phy
  • From: Song Xue <quic_songxue@xxxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: bluetooth: add 'qcom,product-variant'
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v5 16/16] net: stmmac: platform: Fix PTP clock rate reading
  • From: Paolo Abeni <pabeni@xxxxxxxxxx>
• Re: [PATCH v2 2/3] arm64: dts: qcom: qcs615: add UFS node
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: qcs615: enable pcie for qcs615
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• Re: [PATCH 3/5] dt-bindings: PCI: qcom: Document the QCS615 PCIe Controller
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• Re: [PATCH 2/5] phy: qcom: qmp: Add phy register and clk setting for QCS615 PCIe
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the QCS615 QMP PCIe PHY Gen3 x1
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• Re: [PATCH 1/2] mtd: rawnand: qcom: Pass 18 bit offset from QPIC base address to BAM
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v1 4/4] misc: fastrpc: Add debugfs support for fastrpc
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v2 2/2] arm64: dts: qcom: Enable Primary USB controller on QCS615 Ride
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v2 1/2] arm64: dts: qcom: Add support for usb node on QCS615
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v2 0/2] Add DT Support for primary USB on QCS615
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v1 3/4] misc: fastrpc: Introduce fastrpc_shared.h header
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v7 3/3] coresight: dummy: Add static trace id support for dummy source
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v7 1/3] dt-bindings: arm: Add arm,static-trace-id for coresight dummy source
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v7 2/3] coresight: Add support to get static id for system trace sources
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v7 0/3] coresight: Add static trace id support
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• Re: [PATCH v1 2/4] misc: fastrpc: Rename fastrpc.c to fastrpc_main.c
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• Re: [PATCH 2/2] mtd: rawnand: qcom: Fix onfi param page read
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• Re: [PATCH 1/2] mtd: rawnand: qcom: Pass 18 bit offset from QPIC base address to BAM
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• Re: [PATCH v3 2/3] soc: qcom: llcc: Update configuration data for IPQ5424
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v2 2/2] arm64: dts: qcom: ipq5424: Add watchdog node
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: watchdog: Document Qualcomm IPQ5424
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH v2 0/2] Add watchdog support for IPQ5424
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH v4 3/3] arm64: dts: qcom: ipq5424: Add LLCC/system-cache-controller
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v4 2/3] soc: qcom: llcc: Update configuration data for IPQ5424
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v4 1/3] dt-bindings: cache: qcom,llcc: Add IPQ5424 compatible
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v4 0/3] qcom: ipq5424: Add LLCC/system-cache-controller
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH RFC 0/2] Avoid reprogram all keys to Inline Crypto Engine for MMC runtime suspend resume
  • From: Seshu Madhavi Puppala <quic_spuppala@xxxxxxxxxxx>
• Re: [PATCH RFC v3 1/2] mmc: core: Add vendor hook to control reprogram keys to Crypto Engine
  • From: Seshu Madhavi Puppala <quic_spuppala@xxxxxxxxxxx>
• Re: [PATCH v2 4/4] Bluetooth: hci_qca: add qcom,product-variant properties
  • From: Cheng Jiang <quic_chejiang@xxxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: bluetooth: add 'qcom,product-variant'
  • From: Cheng Jiang <quic_chejiang@xxxxxxxxxxx>
• Re: [PATCH v2 4/4] Bluetooth: hci_qca: add qcom,product-variant properties
  • From: Cheng Jiang <quic_chejiang@xxxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: bluetooth: add 'qcom,product-variant'
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: bluetooth: Add qca6698 compatible string
  • From: Cheng Jiang <quic_chejiang@xxxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: bluetooth: add 'qcom,product-variant'
  • From: Cheng Jiang <quic_chejiang@xxxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: bluetooth: add 'qcom,product-variant'
  • From: Cheng Jiang <quic_chejiang@xxxxxxxxxxx>
• Re: [PATCH 0/5] scsi: ufs: Bug fixes for ufs core and platform drivers
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: ufs: Switch back to struct platform_driver::remove()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 2/6] arm64: dts: qcom: qcs615: Add display mdss and dsi configuration
  • From: fange zhang <quic_fangez@xxxxxxxxxxx>
• Re: [PATCH v4 1/2] init/Kconfig: add python3 availability config
  • From: Rob Clark <robdclark@xxxxxxxxx>
• [PATCH RFC 1/3] tee: revert removal of redundant teedev in struct tee_shm
  • From: Amirreza Zarrabi <quic_azarrabi@xxxxxxxxxxx>
• [PATCH RFC 3/3] tee: introduce orphan tee_shm and default context
  • From: Amirreza Zarrabi <quic_azarrabi@xxxxxxxxxxx>
• [PATCH RFC 0/3] Introduce orphan tee_shm and default tee_context
  • From: Amirreza Zarrabi <quic_azarrabi@xxxxxxxxxxx>
• [PATCH RFC 2/3] tee: revert removal of linked list of struct tee_shm
  • From: Amirreza Zarrabi <quic_azarrabi@xxxxxxxxxxx>
• Re: [PATCH 4/6] dt-bindings: display/msm: Add QCS615 DSI phy
  • From: fange zhang <quic_fangez@xxxxxxxxxxx>
• Re: [PATCH v30 02/30] xhci: sec-intr: add initial api to register a secondary interrupter entity
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v4 1/2] init/Kconfig: add python3 availability config
  • From: Petr Vorel <pvorel@xxxxxxx>
• Re: [PATCH 2/6] dt-bindings: media: Add qcom,x1e80100-camss binding
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: media: Add qcom,x1e80100-camss binding
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v30 00/30] Introduce QC USB SND audio offloading support
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: media: Add qcom,x1e80100-camss binding
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• Re: [PATCH v30 15/30] ASoC: usb: Fetch ASoC card and pcm device information
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v30 26/30] ALSA: usb-audio: qcom: Introduce QC USB SND offloading support
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH RESEND v17 3/5] iommu/arm-smmu: add support for PRR bit setup
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH net-next v2] net: wwan: Add WWAN sahara port type
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH v4 1/2] init/Kconfig: add python3 availability config
  • From: Masahiro Yamada <masahiroy@xxxxxxxxxx>
• [PATCH v4 2/2] drm/msm: depend on python3
  • From: Petr Vorel <pvorel@xxxxxxx>
• [PATCH v4 1/2] init/Kconfig: add python3 availability config
  • From: Petr Vorel <pvorel@xxxxxxx>
• Re: [PATCH net-next v2] net: wwan: Add WWAN sahara port type
  • From: Sergey Ryazanov <ryazanov.s.a@xxxxxxxxx>
• [PATCH v3 2/2] drm/msm: require python3
  • From: Petr Vorel <pvorel@xxxxxxx>
• [PATCH v3 1/2] init/Kconfig: add python3 availability check
  • From: Petr Vorel <pvorel@xxxxxxx>
• [PATCH v2 2/2] drm/msm: require python3 and xml.parsers.expat module
  • From: Petr Vorel <pvorel@xxxxxxx>
• [PATCH v2 1/2] init/Kconfig: add python3 availability check
  • From: Petr Vorel <pvorel@xxxxxxx>
• Re: [RFC][PATCH 1/1] drm/msm: require python3 and xml.parsers.expat module
  • From: Petr Vorel <pvorel@xxxxxxx>
• Re: [PATCH v30 28/30] ALSA: usb-audio: Add USB offload route kcontrol
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v2 03/11] drm/msm: adreno: move features bits in a separate variable
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [RFC][PATCH 1/1] drm/msm: require python3 and xml.parsers.expat module
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v30 01/30] usb: host: xhci: Repurpose event handler for skipping interrupter events
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v4 1/2] filemap: Pass address_space mapping to ->free_folio()
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v4 2/2] mm: guestmem: Convert address_space operations to guestmem library
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v4 0/2] mm: Refactor KVM guest_memfd to introduce guestmem library
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: gdsc: Add pm_runtime hooks
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH RESEND v17 3/5] iommu/arm-smmu: add support for PRR bit setup
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [RFC PATCH 1/1] arm64: dts: qcom: sdm845-oneplus-common: enable resin/volume down
  • From: Petr Vorel <pvorel@xxxxxxx>
• Re: [PATCH v2 2/3] arm64: dts: qcom: qcs8300: Add watchdog node
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: qcs8300-ride: Add watchdog node
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 2/3] arm64: dts: qcom: qcs615: add UFS node
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/2] clk: qcom: common: Add support for power-domain attachment
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 3/4] arm64: dts: qcom: sa8775p-ride: update BT nodes
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: bluetooth: Add qca6698 compatible string
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: bluetooth: add 'qcom,product-variant'
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 5/5] arm64: dts: qcom: Add support for QCS9075 Ride & Ride-r3
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 3/5] dt-bindings: arm: qcom: Document rb8/ride/ride-r3 on QCS9075
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 0/5] arm64: qcom: Add support for QCS9075 boards
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 0/6] firmware: qcom: scm: Fixes for concurrency
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH v3 0/5] arm64: qcom: Add support for QCS9075 boards
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v6 04/28] media: iris: introduce iris core state management with shared queues
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• [RFC][PATCH 1/1] drm/msm: require python3 and xml.parsers.expat module
  • From: Petr Vorel <pvorel@xxxxxxx>
• [PATCH v6 26/28] media: iris: add check to allow sub states transitions
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 27/28] media: iris: enable video driver probe of SM8250 SoC
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 21/28] media: iris: add support for dynamic resolution change
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• Re: [RFC PATCH 1/1] arm64: dts: qcom: sdm845-oneplus-common: enable resin/volume down
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v6 11/28] media: iris: implement g_selection ioctl
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 18/28] media: iris: subscribe parameters and properties to firmware for hfi_gen2
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• Re: [PATCH v3 6/6] PCI: pwrctl: Add power control driver for qps615
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH v6 25/28] media: iris: implement power scaling for vpu2 and vpu3
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [RFC PATCH 1/1] arm64: dts: qcom: sdm845-oneplus-common: enable resin/volume down
  • From: Petr Vorel <pvorel@xxxxxxx>
• [PATCH v6 15/28] media: iris: implement query_cap ioctl
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 28/28] media: MAINTAINERS: add Qualcomm iris video accelerator driver
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 13/28] media: iris: implement subscribe_event and unsubscribe_event ioctls
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 24/28] media: iris: add check whether the video session is supported or not
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 05/28] media: iris: implement video firmware load/unload
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 23/28] media: iris: add support for drain sequence
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 22/28] media: iris: handle streamoff/on from client in dynamic resolution change
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 20/28] media: iris: implement vb2 ops for buf_queue and firmware response
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 19/28] media: iris: allocate, initialize and queue internal buffers
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 17/28] media: iris: implement set properties to firmware during streamon
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 10/28] media: iris: implement s_fmt, g_fmt and try_fmt ioctls
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 16/28] media: iris: implement vb2 streaming ops
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 14/28] media: iris: implement iris v4l2_ctrl_ops
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 02/28] media: iris: add platform driver for iris video device
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 12/28] media: iris: implement enum_fmt and enum_framesizes ioctls
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 09/28] media: iris: implement reqbuf ioctl with vb2_queue_setup
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 08/28] media: iris: implement power management
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 07/28] media: iris: introduce host firmware interface with necessary hooks
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 06/28] media: iris: implement boot sequence of the firmware
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 04/28] media: iris: introduce iris core state management with shared queues
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 03/28] media: iris: implement iris v4l2 file ops
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 00/28] Qualcomm iris video decoder driver
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 01/28] dt-bindings: media: Add video support for QCOM SM8550 SoC
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: i2c: qcom-cci: Document x1e80100 compatible
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v30 02/30] xhci: sec-intr: add initial api to register a secondary interrupter entity
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/6] firmware: qcom: scm: Handle various probe ordering for qcom_scm_assign_mem()
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/6] firmware: qcom: scm: Handle various probe ordering for qcom_scm_assign_mem()
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/6] firmware: qcom: scm: Handle various probe ordering for qcom_scm_assign_mem()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v3 2/6] arm64: dts: qcom: qcs6490-rb3gen2: Add node for qps615
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v5 13/16] dt-bindings: net: Add DT bindings for DWMAC on NXP S32G/R SoCs
  • From: Jan Petrous <jan.petrous@xxxxxxxxxxx>
• Re: [PATCH v5 16/16] net: stmmac: platform: Fix PTP clock rate reading
  • From: Jan Petrous <jan.petrous@xxxxxxxxxxx>
• Re: [PATCH v3 2/3] soc: qcom: llcc: Update configuration data for IPQ5424
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v30 00/30] Introduce QC USB SND audio offloading support
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH v2 10/11] arm64: qcom: dts: sm8550: add interconnect and opp-peak-kBps for GPU
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v2 04/11] drm/msm: adreno: add GMU_BW_VOTE feature flag
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v2 05/11] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 4/6] dt-bindings: display/msm: Add QCS615 DSI phy
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v30 15/30] ASoC: usb: Fetch ASoC card and pcm device information
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH] mmc: sdhci-msm: Slot indexing for distinguishing multiple SDCC instances
  • From: Sachin Gupta <quic_sachgupt@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcs9100: Update memory map for QCS9100 Ride and QCS9100 Ride Rev3
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH drm-next] drm/msm/dp: Fix potential division by zero issue
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v30 26/30] ALSA: usb-audio: qcom: Introduce QC USB SND offloading support
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH v3] arm64: dts: qcom: qdu/qru1000-idp: Fix the voltage setting
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 5/5] arm64: dts: qcom: Add support for QCS9075 Ride & Ride-r3
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v30 28/30] ALSA: usb-audio: Add USB offload route kcontrol
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH v4 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] qcom: llcc/edac: Correct interrupt enable register configuration
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 00/16] Add support for Synopsis DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 00/16] Add support for Synopsis DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
  • From: Jan Petrous <jan.petrous@xxxxxxxxxxx>
• Re: [PATCH drm-next] drm/msm/dp: Fix potential division by zero issue
  • From: Dheeraj Reddy Jonnalagadda <dheeraj.linuxdev@xxxxxxxxx>
• Re: [PATCH 3/6] dt-bindings: clock: qcom: Add second power-domain to CAMCC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
  • From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
• Re: [PATCH v3 4/5] arm64: dts: qcom: Add support for QCS9075 RB8
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v30 07/30] ALSA: Add USB audio device jack type
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH v2 11/11] arm64: qcom: dts: sm8650: add interconnect and opp-peak-kBps for GPU
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 10/11] arm64: qcom: dts: sm8550: add interconnect and opp-peak-kBps for GPU
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 09/11] drm/msm: adreno: enable GMU bandwidth for A740 and A750
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v30 01/30] usb: host: xhci: Repurpose event handler for skipping interrupter events
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 07/11] drm/msm: adreno: find bandwidth index of OPP and set it along freq index
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 05/11] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
  • From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
• Re: [PATCH v4 1/2] arm64: dts: qcom: sa8775p: add DisplayPort device nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: add venus firmware file for qcs615
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: add venus firmware file for qcs615
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: [PATCH v2 04/11] drm/msm: adreno: add GMU_BW_VOTE feature flag
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 03/11] drm/msm: adreno: move features bits in a separate variable
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 2/6] arm64: dts: qcom: qcs6490-rb3gen2: Add node for qps615
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 0/6] firmware: qcom: scm: Fixes for concurrency
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 0/2] Enable Display Port for Qualcomm SA8775P-ride platform
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 6/6] firmware: qcom: scm: smc: Narrow 'mempool' variable scope
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 4/4] Bluetooth: hci_qca: add qcom,product-variant properties
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH drm-next] drm/msm/dp: Fix potential division by zero issue
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 0/2] Enable Display Port for Qualcomm SA8775P-ride platform
  • From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
• [PATCH v4 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
  • From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
• [PATCH v4 1/2] arm64: dts: qcom: sa8775p: add DisplayPort device nodes
  • From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
• Re: [PATCH v2 4/4] Bluetooth: hci_qca: add qcom,product-variant properties
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/6] firmware: qcom: scm: Fix missing read barrier in qcom_scm_is_available()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 3/4] arm64: dts: qcom: sa8775p-ride: update BT nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: bluetooth: Add qca6698 compatible string
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: bluetooth: add 'qcom,product-variant'
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: add venus firmware file for qcs615
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 2/4] dt-bindings: bluetooth: Add qca6698 compatible string
  • From: Cheng Jiang <quic_chejiang@xxxxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: bluetooth: add 'qcom,product-variant'
  • From: Cheng Jiang <quic_chejiang@xxxxxxxxxxx>
• [PATCH v1 0/4] Add qcom,product-variant properties in Qualcomm
  • From: Cheng Jiang <quic_chejiang@xxxxxxxxxxx>
• [PATCH v2 3/4] arm64: dts: qcom: sa8775p-ride: update BT nodes
  • From: Cheng Jiang <quic_chejiang@xxxxxxxxxxx>
• [PATCH v2 4/4] Bluetooth: hci_qca: add qcom,product-variant properties
  • From: Cheng Jiang <quic_chejiang@xxxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: ipq5424: Add watchdog node
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH v14 8/8] arm64: dts: qcom: ipq9574: Remove eMMC node
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v14 6/8] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v14 7/8] arm64: dts: qcom: ipq9574: Add SPI nand support
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v14 4/8] mtd: nand: Add qpic_common API file
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v14 5/8] mtd: rawnand: qcom: use FIELD_PREP and GENMASK
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v14 3/8] mtd: rawnand: qcom: Add qcom prefix to common api
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v14 2/8] mtd: rawnand: qcom: cleanup qcom_nandc driver
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v14 1/8] spi: dt-bindings: Introduce qcom,spi-qpic-snand
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v14 0/8] Add QPIC SPI NAND driver
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: media: Add qcom,x1e80100-camss binding
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 6/6] arm64: dts: qcom: x1e80100: Add CAMSS block definition
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 3/6] dt-bindings: clock: qcom: Add second power-domain to CAMCC
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: i2c: qcom-cci: Document x1e80100 compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/2] drm/msm/dpu1: don't choke on disabling the writeback connector
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [v2,1/2] drm/msm/dpu1: don't choke on disabling the writeback connector
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 4/7] dt-bindings: clock: qcom: Add SM8750 GCC
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/7] dt-bindings: clock: qcom-rpmhcc: Add RPMHCC for SM8750
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 2/6] arm64: dts: qcom: qcs6490-rb3gen2: Add node for qps615
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: PCI: Add binding for qps615
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: ipq5424: Add watchdog node
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: watchdog: Document Qualcomm IPQ5424
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 00/11] dmaengine: qcom: bam_dma: add cmd descriptor support
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• Re: [PATCH 2/2] mtd: rawnand: qcom: Fix onfi param page read
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 1/2] mtd: rawnand: qcom: Pass 18 bit offset from QPIC base address to BAM
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcs9100: Update memory map for QCS9100 Ride and QCS9100 Ride Rev3
  • From: Pratyush Brahma <quic_pbrahma@xxxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: ipq5424: Add watchdog node
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: watchdog: Document Qualcomm IPQ5424
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH 0/2] Add watchdog support for IPQ5424
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH drm-next] drm/msm/dp: Fix potential division by zero issue
  • From: Dheeraj Reddy Jonnalagadda <dheeraj.linuxdev@xxxxxxxxx>
• Re: [v2,1/2] drm/msm/dpu1: don't choke on disabling the writeback connector
  • From: Leonard Lausen <leonard@xxxxxxxxx>
• Re: [PATCH v2] soc: qcom: Rework BCM_TCS_CMD macro
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v5 13/16] dt-bindings: net: Add DT bindings for DWMAC on NXP S32G/R SoCs
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcs9100: Update memory map for QCS9100 Ride and QCS9100 Ride Rev3
  • From: Kuldeep Singh <quic_kuldsing@xxxxxxxxxxx>
• Re: [PATCH RFC/RFT 4/6] firmware: qcom: scm: Cleanup global '__scm' on probe failures
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/6] firmware: qcom: scm: Fix missing read barrier in qcom_scm_get_tzmem_pool()
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 6/6] firmware: qcom: scm: smc: Narrow 'mempool' variable scope
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: regulator: qcom-labibb-regulator: document the pmi8950 labibb regulator
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 2/6] firmware: qcom: scm: Fix missing read barrier in qcom_scm_get_tzmem_pool()
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 03/11] drm/msm: adreno: move features bits in a separate variable
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 02/11] drm/msm: adreno: rename quirks that are features
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 5/6] firmware: qcom: scm: smc: Handle missing SCM device
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH RFC/RFT 4/6] firmware: qcom: scm: Cleanup global '__scm' on probe failures
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 3/6] firmware: qcom: scm: Handle various probe ordering for qcom_scm_assign_mem()
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/6] firmware: qcom: scm: Fix missing read barrier in qcom_scm_is_available()
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 0/6] firmware: qcom: scm: Fixes for concurrency
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 2/5] soc: qcom: socinfo: add QCS9075 SoC ID
  • From: Wasim Nazir <quic_wasimn@xxxxxxxxxxx>
• [PATCH v2 08/11] drm/msm: adreno: request for maximum bus bandwidth usage
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 04/11] drm/msm: adreno: add GMU_BW_VOTE feature flag
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH] scsi: ufs: Switch back to struct platform_driver::remove()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH v2 01/11] opp: core: implement dev_pm_opp_get_bw
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 09/11] drm/msm: adreno: enable GMU bandwidth for A740 and A750
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v3 0/5] arm64: qcom: Add support for QCS9075 boards
  • From: Wasim Nazir <quic_wasimn@xxxxxxxxxxx>
• [PATCH v2 00/11] drm/msm: adreno: add support for DDR bandwidth scaling via GMU
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 05/11] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v30 00/30] Introduce QC USB SND audio offloading support
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v2 4/5] arm64: dts: qcom: Add support for QCS9075 RB8
  • From: Wasim Nazir <quic_wasimn@xxxxxxxxxxx>
• [PATCH v2 11/11] arm64: qcom: dts: sm8650: add interconnect and opp-peak-kBps for GPU
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 10/11] arm64: qcom: dts: sm8550: add interconnect and opp-peak-kBps for GPU
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 07/11] drm/msm: adreno: find bandwidth index of OPP and set it along freq index
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 06/11] drm/msm: adreno: dynamically generate GMU bw table
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v3 4/5] arm64: dts: qcom: Add support for QCS9075 RB8
  • From: Wasim Nazir <quic_wasimn@xxxxxxxxxxx>
• [PATCH v3 5/5] arm64: dts: qcom: Add support for QCS9075 Ride & Ride-r3
  • From: Wasim Nazir <quic_wasimn@xxxxxxxxxxx>
• [PATCH v3 1/5] dt-bindings: arm: qcom,ids: add SoC ID for QCS9075
  • From: Wasim Nazir <quic_wasimn@xxxxxxxxxxx>
• [PATCH v3 3/5] dt-bindings: arm: qcom: Document rb8/ride/ride-r3 on QCS9075
  • From: Wasim Nazir <quic_wasimn@xxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: net: qcom,ethqos: revise description for qcs615
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 5/5] arm64: dts: qcom: Add support for QCS9075 Ride & Ride-r3
  • From: Wasim Nazir <quic_wasimn@xxxxxxxxxxx>
• Re: [PATCH v5 10/16] net: macb: Use helper rgmii_clock
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] PCI: qcom: Add Qualcomm SA8255p based PCIe root complex functionality
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: remoteproc: Consolidate SC8180X and SM8150 PAS files
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: usb: qcom,dwc3: Make ss_phy_irq optional for X1E80100
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 0/4] Add Qualcomm SA8255p based firmware managed PCIe root complex
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v5 16/16] net: stmmac: platform: Fix PTP clock rate reading
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 04/16] net: phy: Add helper for mapping RGMII link speed to clock rate
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 14/16] net: stmmac: dwmac-s32: add basic NXP S32G/S32R glue driver
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 12/16] net: dwmac-sti: Use helper rgmii_clock
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 11/16] net: xgene_enet: Use helper rgmii_clock
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 09/16] net: dwmac-starfive: Use helper rgmii_clock
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 08/16] net: dwmac-rk: Use helper rgmii_clock
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 07/16] net: dwmac-intel-plat: Use helper rgmii_clock
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 06/16] net: dwmac-imx: Use helper rgmii_clock
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 05/16] net: dwmac-dwc-qos-eth: Use helper rgmii_clock
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 00/16] Add support for Synopsis DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 02/16] net: driver: stmmac: Extend CSR calc support
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 03/16] net: stmmac: Fix clock rate variables size
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] drm/msm/adreno: Setup SMMU aparture for per-process page table
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: regulator: qcom-labibb-regulator: document the pmi8950 labibb regulator
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v5 13/16] dt-bindings: net: Add DT bindings for DWMAC on NXP S32G/R SoCs
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] clk: qcom: common: Add support for power-domain attachment
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: gdsc: Add pm_runtime hooks
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 0/2] clk: qcom: Add support for multiple power-domains for a clock controller.
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 6/6] arm64: dts: qcom: x1e80100: Add CAMSS block definition
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 3/6] dt-bindings: clock: qcom: Add second power-domain to CAMCC
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: media: Add qcom,x1e80100-camss binding
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [v2,1/2] drm/msm/dpu1: don't choke on disabling the writeback connector
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH v5 11/16] net: xgene_enet: Use helper rgmii_clock
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• [PATCH v5 16/16] net: stmmac: platform: Fix PTP clock rate reading
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• [PATCH v5 12/16] net: dwmac-sti: Use helper rgmii_clock
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• [PATCH v5 15/16] MAINTAINERS: Add Jan Petrous as the NXP S32G/R DWMAC driver maintainer
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• [PATCH v5 14/16] net: stmmac: dwmac-s32: add basic NXP S32G/S32R glue driver
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• [PATCH v5 04/16] net: phy: Add helper for mapping RGMII link speed to clock rate
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• [PATCH v5 00/16] Add support for Synopsis DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• [PATCH v5 13/16] dt-bindings: net: Add DT bindings for DWMAC on NXP S32G/R SoCs
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• [PATCH v5 08/16] net: dwmac-rk: Use helper rgmii_clock
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• [PATCH v5 09/16] net: dwmac-starfive: Use helper rgmii_clock
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• [PATCH v5 06/16] net: dwmac-imx: Use helper rgmii_clock
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• [PATCH v5 07/16] net: dwmac-intel-plat: Use helper rgmii_clock
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• [PATCH v5 10/16] net: macb: Use helper rgmii_clock
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• [PATCH v5 05/16] net: dwmac-dwc-qos-eth: Use helper rgmii_clock
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• [PATCH v5 02/16] net: driver: stmmac: Extend CSR calc support
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• [PATCH v5 03/16] net: stmmac: Fix clock rate variables size
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• [PATCH v5 01/16] net: driver: stmmac: Fix CSR divider comment
  • From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
• Re: [PATCH v4 14/16] net: stmmac: dwmac-s32: add basic NXP S32G/S32R glue driver
  • From: Jan Petrous <jan.petrous@xxxxxxxxxxx>
• Re: [PATCH v2] i2c: i2c-qcom-geni: Serve transfer during early resume stage
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxxxx>
• Re: [PATCH 3/6] dt-bindings: clock: qcom: Add second power-domain to CAMCC
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• Re: [PATCH 6/6] arm64: dts: qcom: x1e80100: Add CAMSS block definition
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• Re: [PATCH 5/6] arm64: dts: qcom: x1e80100: Add CCI definitions
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• Re: [v2,1/2] drm/msm/dpu1: don't choke on disabling the writeback connector
  • From: Leonard Lausen <leonard@xxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: media: Add qcom,x1e80100-camss binding
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• Re: [PATCH v2] i2c: i2c-qcom-geni: Serve transfer during early resume stage
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• [PATCH v3] i2c: i2c-qcom-geni: Serve transfer during early resume stage
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [v2,1/2] drm/msm/dpu1: don't choke on disabling the writeback connector
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcs9100: Update memory map for QCS9100 Ride and QCS9100 Ride Rev3
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH 2/6] dt-bindings: media: Add qcom,x1e80100-camss binding
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 0/6] Add dt-bindings and dtsi changes for CAMSS on x1e80100 silicon
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 6/6] arm64: dts: qcom: x1e80100: Add CAMSS block definition
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 5/6] arm64: dts: qcom: x1e80100: Add CCI definitions
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 4/6] arm64: dts: qcom: x1e80100: Add CAMCC block definition
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 3/6] dt-bindings: clock: qcom: Add second power-domain to CAMCC
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 1/6] dt-bindings: i2c: qcom-cci: Document x1e80100 compatible
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH] mailbox: Switch back to struct platform_driver::remove()
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH] mailbox: Switch back to struct platform_driver::remove()
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v3] arm64: qcom: qcs8300: Add ADSP and CDSP0 fastrpc nodes
  • From: Ling Xu <quic_lxu5@xxxxxxxxxxx>
• Re: [PATCH 0/3] Add standalone ethernet MAC entries for qcs615
  • From: Paolo Abeni <pabeni@xxxxxxxxxx>
• Re: [PATCH v6 2/3] coresight: Add support to get static id for system trace sources
  • From: Jinlong Mao <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: watchdog: Document Qualcomm QCS8300 watchdog
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• [PATCH v2 0/3] Enable Watchdog on QCS8300
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• [PATCH v2 3/3] arm64: dts: qcom: qcs8300-ride: Add watchdog node
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• [PATCH v2 2/3] arm64: dts: qcom: qcs8300: Add watchdog node
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: Enable Primary USB controller on QCS615 Ride
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: qcs615-ride: Enable ethernet node
  • From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
• Re: [PATCH 0/2] clk: qcom: Add support for multiple power-domains for a clock controller.
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH V4 1/3] dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• [PATCH] arm64: dts: qcom: qcs9100: Update memory map for QCS9100 Ride and QCS9100 Ride Rev3
  • From: Pratyush Brahma <quic_pbrahma@xxxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: Enable Primary USB controller on QCS615 Ride
  • From: Song Xue <quic_songxue@xxxxxxxxxxx>
• [PATCH 2/2] mtd: rawnand: qcom: Fix onfi param page read
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH 1/2] mtd: rawnand: qcom: Pass 18 bit offset from QPIC base address to BAM
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH 0/2] QPIC v2 fixes for SDX75
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• Re: [PATCH v3 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH V4 3/4] iio: adc: Add support for QCOM PMIC5 Gen3 ADC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V4 2/4] dt-bindings: iio: adc: Add support for QCOM PMIC5 Gen3 ADC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v5 3/4] coresight: Add support for trace filtering by source
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH] mailbox: Switch back to struct platform_driver::remove()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH 0/5] Add support for MBG Thermal monitoring device
  • From: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
• Re: [PATCH 3/5] thermal: qcom: Add support for MBG Temp monitor
  • From: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
• Re: [PATCH 2/5] dt-bindings: thermal: qcom: Add MBG thermal monitor bindings
  • From: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
• Re: [PATCH V8 1/1] cpufreq: scmi: Register for limit change notifications
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH v3] arm64: dts: qcom: qdu/qru1000-idp: Fix the voltage setting
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• [PATCH] qcom: llcc/edac: Correct interrupt enable register configuration
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• Re: [PATCH v2 2/3] soc: qcom: llcc: Update configuration data for IPQ5424
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v3 2/3] soc: qcom: llcc: Update configuration data for IPQ5424
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v3 3/3] arm64: dts: qcom: ipq5424: Add LLCC/system-cache-controller
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: cache: qcom,llcc: Add IPQ5424 compatible
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH 0/2] clk: qcom: Add support for multiple power-domains for a clock controller.
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH v3 0/3] qcom: ipq5424: Add LLCC/system-cache-controller
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: Enable Primary USB controller on QCS615 Ride
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH 1/2] arm64: dts: qcom: Add support for usb node on QCS615
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH 0/2] Add DT Support for primary USB on QCS615
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH 4/6] dt-bindings: display/msm: Add QCS615 DSI phy
  • From: fange zhang <quic_fangez@xxxxxxxxxxx>
• Re: [PATCH 6/6] dt-bindings: display/msm: dsi-controller-main: Document QCS615
  • From: fange zhang <quic_fangez@xxxxxxxxxxx>
• Re: [GIT PULL] Qualcomm clock updates for v6.13
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• [PATCH v2 3/3] arm64: dts: qcom: qcs615-ride: Enable UFS node
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• [PATCH v2 2/3] arm64: dts: qcom: qcs615: add UFS node
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• [PATCH v2 0/3] Enable UFS on QCS615
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• Re: [PATCH v2 5/7] clk: qcom: Add support for GCC clock controller on SM8750
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/7] clk: qcom: rpmh: Add support for SM8750 rpmh clocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: qcs615-ride: Enable ethernet node
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH] i2c: qup: use generic device property accessors
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 1/2] clk: qcom: common: Add support for power-domain attachment
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 1/2] clk: qcom: common: Add support for power-domain attachment
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• Re: [PATCH v2 2/6] arm64: dts: qcom: Add pmd8028 and pmih0108 PMICs
  • From: Melody Olvera <quic_molvera@xxxxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: arm: qcom: Document sm8750 SoC and boards
  • From: Melody Olvera <quic_molvera@xxxxxxxxxxx>
• Re: [PATCH 5/5] drm/connector: make mode_valid accept const struct drm_display_mode
  • From: Raphaël Gallais-Pou <rgallaispou@xxxxxxxxx>
• Re: [PATCH v8 3/6] firmware: psci: Read and use vendor reset types
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH v2 5/7] clk: qcom: Add support for GCC clock controller on SM8750
  • From: Melody Olvera <quic_molvera@xxxxxxxxxxx>
• Re: [PATCH v6 3/5] firmware: psci: Read and use vendor reset types
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH 3/5] drm/sti: hda: pass const struct drm_display_mode* to hda_get_mode_idx()
  • From: Raphaël Gallais-Pou <rgallaispou@xxxxxxxxx>
• Re: [PATCH v2 2/7] clk: qcom: rpmh: Add support for SM8750 rpmh clocks
  • From: Melody Olvera <quic_molvera@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] interconnect: qcom: Add interconnect provider driver for SM8750
  • From: Melody Olvera <quic_molvera@xxxxxxxxxxx>
• Re: [PATCH] accel/qaic: Drop redundant vfree() null check in sahara
  • From: Carl Vanderlip <quic_carlv@xxxxxxxxxxx>
• Re: [PATCH v2] regulator: qcom-rpmh: Update ranges for FTSMPS525
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v6 3/5] firmware: psci: Read and use vendor reset types
  • From: Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx>
• Re: [PATCH RFC 6/8] drm/msm: adreno: enable GMU bandwidth for A740 and A750
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH RESEND v17 0/5] iommu/arm-smmu: introduction of ACTLR implementation for Qualcomm SoCs
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 4/4] misc: fastrpc: Add debugfs support for fastrpc
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 3/4] misc: fastrpc: Introduce fastrpc_shared.h header
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 2/4] misc: fastrpc: Rename fastrpc.c to fastrpc_main.c
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: gdsc: Add pm_runtime hooks
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 0/2] clk: qcom: Add support for multiple power-domains for a clock controller.
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH RFC 6/8] drm/msm: adreno: enable GMU bandwidth for A740 and A750
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: gdsc: Add pm_runtime hooks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] arm64: qcom: qcs8300: Add ADSP and CDSP0 fastrpc nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 3/3] arm64: dts: qcom: qcs615: add the APPS SMMU node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 0/2] clk: qcom: Add support for multiple power-domains for a clock controller.
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: gdsc: Add pm_runtime hooks
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 1/2] clk: qcom: common: Add support for power-domain attachment
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 1/5] drm/encoder_slave: make mode_valid accept const struct drm_display_mode
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 0/2] clk: qcom: Add support for multiple power-domains for a clock controller.
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: gdsc: Add pm_runtime hooks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2] arm64: qcom: qcs8300: Add ADSP and CDSP0 fastrpc nodes
  • From: Ling Xu <quic_lxu5@xxxxxxxxxxx>
• Re: [PATCH 1/2] clk: qcom: common: Add support for power-domain attachment
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 6/6] arm64: dts: qcom: Add USB controller and phy nodes for IPQ5424
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v8 3/6] firmware: psci: Read and use vendor reset types
  • From: Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx>
• Re: [PATCH RESEND v17 0/5] iommu/arm-smmu: introduction of ACTLR implementation for Qualcomm SoCs
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• Re: [PATCH 5/5] drm/connector: make mode_valid accept const struct drm_display_mode
  • From: Liviu Dudau <liviu.dudau@xxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: qcs615: enable pcie for qcs615
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/5] phy: qcom: qmp: Add phy register and clk setting for QCS615 PCIe
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH V4 1/3] dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH V4 1/3] dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the QCS615 QMP PCIe PHY Gen3 x1
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 2/2] power: supply: max17042: add platform driver variant
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 3/6] drm/msm/dpu: Add QCS615 support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 1/2] power: supply: max17042: make interrupt shared
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH RESEND v8 1/3] clk: qcom: clk-rcg2: document calc_rate function
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH 2/2] arm64: defconfig: enable NXP PTN3222 eUSB2 to USB2 redriver driver
  • From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
• [PATCH 1/2] arm64: dts: qcom: x1e80100-crd: Add USB multiport fingerprint reader
  • From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
• [PATCH 0/2] arm64: dts: qcom: x1e80100-crd: Add USB multiport fingerprint reader
  • From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
• Re: [PATCH v6 10/10] arm64: dts: qcom: Add Xiaomi Redmi 5A
  • From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
• Re: [PATCH v6 2/3] coresight: Add support to get static id for system trace sources
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• [PATCH RESEND v8 2/3] clk: qcom: clk-rcg2: split __clk_rcg2_configure function
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH RESEND v8 3/3] gcc-sdm845: Add general purpose clock ops
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH RESEND v8 0/3] Add divisor computation feature for sdm845 gp clocks
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• Re: [PATCH v6 2/3] coresight: Add support to get static id for system trace sources
  • From: Jinlong Mao <quic_jinlmao@xxxxxxxxxxx>
• Re: [PATCH 5/5] drm/connector: make mode_valid accept const struct drm_display_mode
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/5] drm/connector: make mode_valid_ctx accept const struct drm_display_mode
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• [PATCH v3 2/2] power: supply: max17042: add platform driver variant
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH v3 1/2] power: supply: max17042: make interrupt shared
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH v3 0/2] power: supply: max17042: cleanup and more features
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• Re: [PATCH v4 3/3] arm64: dts: qcom: qcs615: add the APPS SMMU node
  • From: Qingqing Zhou <quic_qqzhou@xxxxxxxxxxx>
• Re: [PATCH v5 3/4] coresight: Add support for trace filtering by source
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH 1/5] drm/encoder_slave: make mode_valid accept const struct drm_display_mode
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH RFC v3 1/2] KVM: guest_memfd: Convert .free_folio() to .release_folio()
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH 3/5] dt-bindings: PCI: qcom: Document the QCS615 PCIe Controller
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v5 3/4] coresight: Add support for trace filtering by source
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [PATCH 1/5] drm/encoder_slave: make mode_valid accept const struct drm_display_mode
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/6] drm/msm/dpu: Add QCS615 support
  • From: fange zhang <quic_fangez@xxxxxxxxxxx>
• [PATCH v1 0/4] Add debugfs support for fastrpc driver
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v1 4/4] misc: fastrpc: Add debugfs support for fastrpc
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v1 3/4] misc: fastrpc: Introduce fastrpc_shared.h header
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v1 2/4] misc: fastrpc: Rename fastrpc.c to fastrpc_main.c
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v1 1/4] misc: fastrpc: Move fastrpc driver to misc/fastrpc/
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH 5/5] arm64: dts: qcom: qcs615: enable pcie for qcs615
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• [PATCH 1/5] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the QCS615 QMP PCIe PHY Gen3 x1
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• [PATCH 0/5] pci: qcom: Add QCS615 PCIe support
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• [PATCH 4/5] PCI: qcom: Add QCS615 PCIe support
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• [PATCH 2/5] phy: qcom: qmp: Add phy register and clk setting for QCS615 PCIe
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• [PATCH 3/5] dt-bindings: PCI: qcom: Document the QCS615 PCIe Controller
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• [PATCH v3 5/5] arm64: dts: qcom: qcs8300-ride-r2: add new board file
  • From: YijieYang <quic_yijiyang@xxxxxxxxxxx>
• [PATCH v3 4/5] arm64: dts: qcom: move common parts for qcs8300-ride variants into a .dtsi
  • From: YijieYang <quic_yijiyang@xxxxxxxxxxx>
• [PATCH v3 3/5] arm64: dts: qcom: qcs8300-ride: enable ethernet0
  • From: YijieYang <quic_yijiyang@xxxxxxxxxxx>
• [PATCH v3 2/5] arm64: dts: qcom: qcs8300: add the first 1Gb ethernet
  • From: YijieYang <quic_yijiyang@xxxxxxxxxxx>
• [PATCH v3 1/5] dt-bindings: arm: qcom: add qcs8300-ride Rev 2
  • From: YijieYang <quic_yijiyang@xxxxxxxxxxx>
• [PATCH v3 0/5] Enable ethernet for qcs8300
  • From: YijieYang <quic_yijiyang@xxxxxxxxxxx>