On Thu, Jan 16, 2025 at 07:21:06PM +0530, Manivannan Sadhasivam wrote:
> Migrate the PCI endpoint test to Kselftest framework. All the tests that
> were part of the previous pcitest.sh file were migrated.
>
> Below is the exclusive list of tests:
>
> 1. BAR0 Test
> 2. BAR1 Test
> 3. BAR2 Test
> 4. BAR3 Test
> 5. BAR4 Test
> 6. BAR5 Test
> 7. Consecutive BAR Tests
> 8. Legacy IRQ Tests
> 9. MSI Interrupt Tests (MSI1 to MSI32)
> 10. MSI-X Interrupt Tests (MSI-X1 to MSI-X2048)
> 11. Read Tests - MEMCPY (For 1, 1024, 1025, 1024000, 1024001 Bytes)
> 12. Write Tests - MEMCPY (For 1, 1024, 1025, 1024000, 1024001 Bytes)
> 13. Copy Tests - MEMCPY (For 1, 1024, 1025, 1024000, 1024001 Bytes)
> 14. Read Tests - DMA (For 1, 1024, 1025, 1024000, 1024001 Bytes)
> 15. Write Tests - DMA (For 1, 1024, 1025, 1024000, 1024001 Bytes)
> 16. Copy Tests - DMA (For 1, 1024, 1025, 1024000, 1024001 Bytes)
>
> BAR, DMA and MEMCPY tests are added as fixture variants and can be executed
> separately as below:
>
> $ pci_endpoint_test -v BAR0
> $ pci_endpoint_test -v dma
> $ pci_endpoint_test -v memcpy
>
> Co-developed-by: Aman Gupta <aman1.gupta@xxxxxxxxxxx>
> Signed-off-by: Aman Gupta <aman1.gupta@xxxxxxxxxxx>
> Co-developed-by: Padmanabhan Rajanbabu <p.rajanbabu@xxxxxxxxxxx>
> Signed-off-by: Padmanabhan Rajanbabu <p.rajanbabu@xxxxxxxxxxx>
> [mani: reworked based on the IOCTL fix, cleanups, documentation, commit message]
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> ---
> Documentation/PCI/endpoint/pci-test-howto.rst | 169 +++++------
> tools/testing/selftests/Makefile | 1 +
> .../testing/selftests/pci_endpoint/.gitignore | 3 +-
> tools/testing/selftests/pci_endpoint/Build | 1 -
> tools/testing/selftests/pci_endpoint/Makefile | 59 +---
> tools/testing/selftests/pci_endpoint/config | 4 +
> .../pci_endpoint/pci_endpoint_test.c | 221 +++++++++++++++
> .../testing/selftests/pci_endpoint/pcitest.c | 265 ------------------
> .../testing/selftests/pci_endpoint/pcitest.sh | 73 -----
> 9 files changed, 300 insertions(+), 496 deletions(-)
> delete mode 100644 tools/testing/selftests/pci_endpoint/Build
> create mode 100644 tools/testing/selftests/pci_endpoint/config
> create mode 100644 tools/testing/selftests/pci_endpoint/pci_endpoint_test.c
> delete mode 100644 tools/testing/selftests/pci_endpoint/pcitest.c
> delete mode 100644 tools/testing/selftests/pci_endpoint/pcitest.sh
>
> diff --git a/Documentation/PCI/endpoint/pci-test-howto.rst b/Documentation/PCI/endpoint/pci-test-howto.rst
> index c4ae7af50ede..7d0dbad61456 100644
> --- a/Documentation/PCI/endpoint/pci-test-howto.rst
> +++ b/Documentation/PCI/endpoint/pci-test-howto.rst
> @@ -123,9 +123,9 @@ above::
> Using Endpoint Test function Device
> -----------------------------------
>
> -pcitest.sh added in tools/testing/selftests/pci_endpoint can be used to run all
> -the default PCI endpoint tests. To compile this tool the following commands
> -should be used::
> +Kselftest added in tools/testing/selftests/pci_endpoint can be used to run all
> +the default PCI endpoint tests. To build the Kselftest for PCI endpoint
> +subsystem, the following commands should be used::
>
> # cd <kernel-dir>
> # make -C tools/testing/selftests/pci_endpoint
> @@ -133,104 +133,73 @@ should be used::
> or if you desire to compile and install in your system::
>
> # cd <kernel-dir>
> - # make -C tools/testing/selftests/pci_endpoint install
> + # make -C tools/testing/selftests/pci_endpoint INSTALL_PATH=/usr/bin install
>
> -The tool and script will be located in <rootfs>/usr/bin/
> +The test will be located in <rootfs>/usr/bin/
>
> -
> -pcitest.sh Output
> -~~~~~~~~~~~~~~~~~
> +Kselftest Output
> +~~~~~~~~~~~~~~~~
> ::
>
> - # pcitest.sh
> - BAR tests
> -
> - BAR0: OKAY
> - BAR1: OKAY
> - BAR2: OKAY
> - BAR3: OKAY
> - BAR4: NOT OKAY
> - BAR5: NOT OKAY
> -
> - Interrupt tests
> -
> - SET IRQ TYPE TO LEGACY: OKAY
> - LEGACY IRQ: NOT OKAY
> - SET IRQ TYPE TO MSI: OKAY
> - MSI1: OKAY
> - MSI2: OKAY
> - MSI3: OKAY
> - MSI4: OKAY
> - MSI5: OKAY
> - MSI6: OKAY
> - MSI7: OKAY
> - MSI8: OKAY
> - MSI9: OKAY
> - MSI10: OKAY
> - MSI11: OKAY
> - MSI12: OKAY
> - MSI13: OKAY
> - MSI14: OKAY
> - MSI15: OKAY
> - MSI16: OKAY
> - MSI17: NOT OKAY
> - MSI18: NOT OKAY
> - MSI19: NOT OKAY
> - MSI20: NOT OKAY
> - MSI21: NOT OKAY
> - MSI22: NOT OKAY
> - MSI23: NOT OKAY
> - MSI24: NOT OKAY
> - MSI25: NOT OKAY
> - MSI26: NOT OKAY
> - MSI27: NOT OKAY
> - MSI28: NOT OKAY
> - MSI29: NOT OKAY
> - MSI30: NOT OKAY
> - MSI31: NOT OKAY
> - MSI32: NOT OKAY
> - SET IRQ TYPE TO MSI-X: OKAY
> - MSI-X1: OKAY
> - MSI-X2: OKAY
> - MSI-X3: OKAY
> - MSI-X4: OKAY
> - MSI-X5: OKAY
> - MSI-X6: OKAY
> - MSI-X7: OKAY
> - MSI-X8: OKAY
> - MSI-X9: NOT OKAY
> - MSI-X10: NOT OKAY
> - MSI-X11: NOT OKAY
> - MSI-X12: NOT OKAY
> - MSI-X13: NOT OKAY
> - MSI-X14: NOT OKAY
> - MSI-X15: NOT OKAY
> - MSI-X16: NOT OKAY
> - [...]
> - MSI-X2047: NOT OKAY
> - MSI-X2048: NOT OKAY
> -
> - Read Tests
> -
> - SET IRQ TYPE TO MSI: OKAY
> - READ ( 1 bytes): OKAY
> - READ ( 1024 bytes): OKAY
> - READ ( 1025 bytes): OKAY
> - READ (1024000 bytes): OKAY
> - READ (1024001 bytes): OKAY
> -
> - Write Tests
> -
> - WRITE ( 1 bytes): OKAY
> - WRITE ( 1024 bytes): OKAY
> - WRITE ( 1025 bytes): OKAY
> - WRITE (1024000 bytes): OKAY
> - WRITE (1024001 bytes): OKAY
> -
> - Copy Tests
> -
> - COPY ( 1 bytes): OKAY
> - COPY ( 1024 bytes): OKAY
> - COPY ( 1025 bytes): OKAY
> - COPY (1024000 bytes): OKAY
> - COPY (1024001 bytes): OKAY
> + # pci_endpoint_test
> + TAP version 13
> + 1..16
> + # Starting 16 tests from 9 test cases.
> + # RUN pci_ep_bar.BAR0.BAR_TEST ...
> + # OK pci_ep_bar.BAR0.BAR_TEST
> + ok 1 pci_ep_bar.BAR0.BAR_TEST
> + # RUN pci_ep_bar.BAR1.BAR_TEST ...
> + # OK pci_ep_bar.BAR1.BAR_TEST
> + ok 2 pci_ep_bar.BAR1.BAR_TEST
> + # RUN pci_ep_bar.BAR2.BAR_TEST ...
> + # OK pci_ep_bar.BAR2.BAR_TEST
> + ok 3 pci_ep_bar.BAR2.BAR_TEST
> + # RUN pci_ep_bar.BAR3.BAR_TEST ...
> + # OK pci_ep_bar.BAR3.BAR_TEST
> + ok 4 pci_ep_bar.BAR3.BAR_TEST
> + # RUN pci_ep_bar.BAR4.BAR_TEST ...
> + # OK pci_ep_bar.BAR4.BAR_TEST
> + ok 5 pci_ep_bar.BAR4.BAR_TEST
> + # RUN pci_ep_bar.BAR5.BAR_TEST ...
> + # OK pci_ep_bar.BAR5.BAR_TEST
> + ok 6 pci_ep_bar.BAR5.BAR_TEST
> + # RUN pci_ep_basic.CONSECUTIVE_BAR_TEST ...
> + # OK pci_ep_basic.CONSECUTIVE_BAR_TEST
> + ok 7 pci_ep_basic.CONSECUTIVE_BAR_TEST
> + # RUN pci_ep_basic.LEGACY_IRQ_TEST ...
> + # OK pci_ep_basic.LEGACY_IRQ_TEST
> + ok 8 pci_ep_basic.LEGACY_IRQ_TEST
> + # RUN pci_ep_basic.MSI_TEST ...
> + # OK pci_ep_basic.MSI_TEST
> + ok 9 pci_ep_basic.MSI_TEST
> + # RUN pci_ep_basic.MSIX_TEST ...
> + # OK pci_ep_basic.MSIX_TEST
> + ok 10 pci_ep_basic.MSIX_TEST
> + # RUN pci_ep_data_transfer.memcpy.READ_TEST ...
> + # OK pci_ep_data_transfer.memcpy.READ_TEST
> + ok 11 pci_ep_data_transfer.memcpy.READ_TEST
> + # RUN pci_ep_data_transfer.memcpy.WRITE_TEST ...
> + # OK pci_ep_data_transfer.memcpy.WRITE_TEST
> + ok 12 pci_ep_data_transfer.memcpy.WRITE_TEST
> + # RUN pci_ep_data_transfer.memcpy.COPY_TEST ...
> + # OK pci_ep_data_transfer.memcpy.COPY_TEST
> + ok 13 pci_ep_data_transfer.memcpy.COPY_TEST
> + # RUN pci_ep_data_transfer.dma.READ_TEST ...
> + # OK pci_ep_data_transfer.dma.READ_TEST
> + ok 14 pci_ep_data_transfer.dma.READ_TEST
> + # RUN pci_ep_data_transfer.dma.WRITE_TEST ...
> + # OK pci_ep_data_transfer.dma.WRITE_TEST
> + ok 15 pci_ep_data_transfer.dma.WRITE_TEST
> + # RUN pci_ep_data_transfer.dma.COPY_TEST ...
> + # OK pci_ep_data_transfer.dma.COPY_TEST
> + ok 16 pci_ep_data_transfer.dma.COPY_TEST
> + # PASSED: 16 / 16 tests passed.
> + # Totals: pass:16 fail:0 xfail:0 xpass:0 skip:0 error:0
> +
> +
> +Testcase 16 (pci_ep_data_transfer.dma.COPY_TEST) will fail for most of the DMA
> +capable endpoint controllers due to the absence of the MEMCPY over DMA. For such
> +controllers, it is advisable to skip the forementioned testcase using below
> +command::
> +
> + # pci_endpoint_test -f pci_ep_bar -f pci_ep_basic -v memcpy -T COPY_TEST -v dma
> diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
> index 2401e973c359..50931cd6aff2 100644
> --- a/tools/testing/selftests/Makefile
> +++ b/tools/testing/selftests/Makefile
> @@ -72,6 +72,7 @@ TARGETS += net/packetdrill
> TARGETS += net/rds
> TARGETS += net/tcp_ao
> TARGETS += nsfs
> +TARGETS += pci_endpoint
> TARGETS += pcie_bwctrl
> TARGETS += perf_events
> TARGETS += pidfd
> diff --git a/tools/testing/selftests/pci_endpoint/.gitignore b/tools/testing/selftests/pci_endpoint/.gitignore
> index 29ab47c48484..6a4837a3e034 100644
> --- a/tools/testing/selftests/pci_endpoint/.gitignore
> +++ b/tools/testing/selftests/pci_endpoint/.gitignore
> @@ -1,3 +1,2 @@
> # SPDX-License-Identifier: GPL-2.0-only
> -*.o
> -pcitest
> +pci_endpoint_test
> diff --git a/tools/testing/selftests/pci_endpoint/Build b/tools/testing/selftests/pci_endpoint/Build
> deleted file mode 100644
> index c375aea21790..000000000000
> --- a/tools/testing/selftests/pci_endpoint/Build
> +++ /dev/null
> @@ -1 +0,0 @@
> -pcitest-y += pcitest.o
> diff --git a/tools/testing/selftests/pci_endpoint/Makefile b/tools/testing/selftests/pci_endpoint/Makefile
> index 3c6fe18e32cc..bf21ebf20b4a 100644
> --- a/tools/testing/selftests/pci_endpoint/Makefile
> +++ b/tools/testing/selftests/pci_endpoint/Makefile
> @@ -1,58 +1,7 @@
> # SPDX-License-Identifier: GPL-2.0
> -include ../../../scripts/Makefile.include
> +CFLAGS += -O2 -Wl,-no-as-needed -Wall $(KHDR_INCLUDES)
> +LDFLAGS += -lrt -lpthread -lm
>
> -bindir ?= /usr/bin
> +TEST_GEN_PROGS = pci_endpoint_test
>
> -ifeq ($(srctree),)
> -srctree := $(patsubst %/tools/testing/selftests/,%,$(dir $(CURDIR)))
> -endif
> -
> -# Do not use make's built-in rules
> -# (this improves performance and avoids hard-to-debug behaviour);
> -MAKEFLAGS += -r
> -
> -CFLAGS += -O2 -Wall -g -D_GNU_SOURCE -I$(OUTPUT)include
> -
> -ALL_TARGETS := pcitest
> -ALL_PROGRAMS := $(patsubst %,$(OUTPUT)%,$(ALL_TARGETS))
> -
> -SCRIPTS := pcitest.sh
> -
> -all: $(ALL_PROGRAMS)
> -
> -export srctree OUTPUT CC LD CFLAGS
> -include $(srctree)/tools/build/Makefile.include
> -
> -#
> -# We need the following to be outside of kernel tree
> -#
> -$(OUTPUT)include/linux/: ../../../../include/uapi/linux/
> - mkdir -p $(OUTPUT)include/linux/ 2>&1 || true
> - ln -sf $(CURDIR)/../../../../include/uapi/linux/pcitest.h $@
> -
> -$(info ${CURDIR})
> -prepare: $(OUTPUT)include/linux/
> -
> -PCITEST_IN := $(OUTPUT)pcitest-in.o
> -$(PCITEST_IN): prepare FORCE
> - $(Q)$(MAKE) $(build)=pcitest
> -$(OUTPUT)pcitest: $(PCITEST_IN)
> - $(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $< -o $@
> -
> -clean:
> - rm -f $(ALL_PROGRAMS)
> - rm -rf $(OUTPUT)include/
> - find $(or $(OUTPUT),.) -name '*.o' -delete -o -name '\.*.cmd' -delete -o -name '\.*.d' -delete
> -
> -install: $(ALL_PROGRAMS)
> - install -d -m 755 $(DESTDIR)$(bindir); \
> - for program in $(ALL_PROGRAMS); do \
> - install $$program $(DESTDIR)$(bindir); \
> - done; \
> - for script in $(SCRIPTS); do \
> - install $$script $(DESTDIR)$(bindir); \
> - done
> -
> -FORCE:
> -
> -.PHONY: all install clean FORCE prepare
> +include ../lib.mk
> diff --git a/tools/testing/selftests/pci_endpoint/config b/tools/testing/selftests/pci_endpoint/config
> new file mode 100644
> index 000000000000..7cdcf117db8d
> --- /dev/null
> +++ b/tools/testing/selftests/pci_endpoint/config
> @@ -0,0 +1,4 @@
> +CONFIG_PCI_ENDPOINT=y
> +CONFIG_PCI_ENDPOINT_CONFIGFS=y
> +CONFIG_PCI_EPF_TEST=m
> +CONFIG_PCI_ENDPOINT_TEST=m
> diff --git a/tools/testing/selftests/pci_endpoint/pci_endpoint_test.c b/tools/testing/selftests/pci_endpoint/pci_endpoint_test.c
> new file mode 100644
> index 000000000000..c267b822c108
> --- /dev/null
> +++ b/tools/testing/selftests/pci_endpoint/pci_endpoint_test.c
> @@ -0,0 +1,221 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Kselftest for PCI Endpoint Subsystem
> + *
> + * Copyright (c) 2022 Samsung Electronics Co., Ltd.
> + * https://www.samsung.com
> + * Author: Aman Gupta <aman1.gupta@xxxxxxxxxxx>
> + *
> + * Copyright (c) 2024, Linaro Ltd.
> + * Author: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> + */
> +
> +#include <errno.h>
> +#include <fcntl.h>
> +#include <stdbool.h>
> +#include <stdio.h>
> +#include <stdlib.h>
> +#include <sys/ioctl.h>
> +#include <unistd.h>
> +
> +#include "../../../../include/uapi/linux/pcitest.h"
> +
> +#include "../kselftest_harness.h"
> +
> +#define pci_ep_ioctl(cmd, arg) \
> +({ \
> + ret = ioctl(self->fd, cmd, arg); \
> + ret = ret < 0 ? -errno : 0; \
> +})
> +
> +static const char *test_device = "/dev/pci-endpoint-test.0";
> +static const unsigned long test_size[5] = { 1, 1024, 1025, 1024000, 1024001 };
> +
> +FIXTURE(pci_ep_bar)
> +{
> + int fd;
> +};
> +
> +FIXTURE_SETUP(pci_ep_bar)
> +{
> + self->fd = open(test_device, O_RDWR);
> +
> + ASSERT_NE(-1, self->fd) TH_LOG("Can't open PCI Endpoint Test device");
> +}
> +
> +FIXTURE_TEARDOWN(pci_ep_bar)
> +{
> + close(self->fd);
> +}
> +
> +FIXTURE_VARIANT(pci_ep_bar)
> +{
> + int barno;
> +};
> +
> +FIXTURE_VARIANT_ADD(pci_ep_bar, BAR0) { .barno = 0 };
> +FIXTURE_VARIANT_ADD(pci_ep_bar, BAR1) { .barno = 1 };
> +FIXTURE_VARIANT_ADD(pci_ep_bar, BAR2) { .barno = 2 };
> +FIXTURE_VARIANT_ADD(pci_ep_bar, BAR3) { .barno = 3 };
> +FIXTURE_VARIANT_ADD(pci_ep_bar, BAR4) { .barno = 4 };
> +FIXTURE_VARIANT_ADD(pci_ep_bar, BAR5) { .barno = 5 };
> +
> +TEST_F(pci_ep_bar, BAR_TEST)
> +{
> + int ret;
> +
> + pci_ep_ioctl(PCITEST_BAR, variant->barno);
> + EXPECT_FALSE(ret) TH_LOG("Test failed for BAR%d", variant->barno);
> +}
> +
> +FIXTURE(pci_ep_basic)
> +{
> + int fd;
> +};
> +
> +FIXTURE_SETUP(pci_ep_basic)
> +{
> + self->fd = open(test_device, O_RDWR);
> +
> + ASSERT_NE(-1, self->fd) TH_LOG("Can't open PCI Endpoint Test device");
> +}
> +
> +FIXTURE_TEARDOWN(pci_ep_basic)
> +{
> + close(self->fd);
> +}
> +
> +TEST_F(pci_ep_basic, CONSECUTIVE_BAR_TEST)
> +{
> + int ret;
> +
> + pci_ep_ioctl(PCITEST_BARS, 0);
> + EXPECT_FALSE(ret) TH_LOG("Consecutive BAR test failed");
> +}
> +
> +TEST_F(pci_ep_basic, LEGACY_IRQ_TEST)
> +{
> + int ret;
> +
> + pci_ep_ioctl(PCITEST_SET_IRQTYPE, 0);
> + ASSERT_EQ(0, ret) TH_LOG("Can't set Legacy IRQ type");
> +
> + pci_ep_ioctl(PCITEST_LEGACY_IRQ, 0);
> + EXPECT_FALSE(ret) TH_LOG("Test failed for Legacy IRQ");
> +}
> +
> +TEST_F(pci_ep_basic, MSI_TEST)
> +{
> + int ret, i;
> +
> + pci_ep_ioctl(PCITEST_SET_IRQTYPE, 1);
> + ASSERT_EQ(0, ret) TH_LOG("Can't set MSI IRQ type");
> +
> + for (i = 1; i <= 32; i++) {
> + pci_ep_ioctl(PCITEST_MSI, i);
> + EXPECT_FALSE(ret) TH_LOG("Test failed for MSI%d", i);
> + }
> +}
> +
> +TEST_F(pci_ep_basic, MSIX_TEST)
> +{
> + int ret, i;
> +
> + pci_ep_ioctl(PCITEST_SET_IRQTYPE, 2);
> + ASSERT_EQ(0, ret) TH_LOG("Can't set MSI-X IRQ type");
> +
> + for (i = 1; i <= 2048; i++) {
> + pci_ep_ioctl(PCITEST_MSIX, i);
> + EXPECT_FALSE(ret) TH_LOG("Test failed for MSI-X%d", i);
> + }
> +}
> +
> +FIXTURE(pci_ep_data_transfer)
> +{
> + int fd;
> +};
> +
> +FIXTURE_SETUP(pci_ep_data_transfer)
> +{
> + self->fd = open(test_device, O_RDWR);
> +
> + ASSERT_NE(-1, self->fd) TH_LOG("Can't open PCI Endpoint Test device");
> +}
> +
> +FIXTURE_TEARDOWN(pci_ep_data_transfer)
> +{
> + close(self->fd);
> +}
> +
> +FIXTURE_VARIANT(pci_ep_data_transfer)
> +{
> + bool use_dma;
> +};
> +
> +FIXTURE_VARIANT_ADD(pci_ep_data_transfer, memcpy)
> +{
> + .use_dma = false,
> +};
> +
> +FIXTURE_VARIANT_ADD(pci_ep_data_transfer, dma)
> +{
> + .use_dma = true,
> +};
> +
> +TEST_F(pci_ep_data_transfer, READ_TEST)
> +{
> + struct pci_endpoint_test_xfer_param param = {};
> + int ret, i;
> +
> + if (variant->use_dma)
> + param.flags = PCITEST_FLAGS_USE_DMA;
> +
> + pci_ep_ioctl(PCITEST_SET_IRQTYPE, 1);
> + ASSERT_EQ(0, ret) TH_LOG("Can't set MSI IRQ type");
> +
> + for (i = 0; i < ARRAY_SIZE(test_size); i++) {
> + param.size = test_size[i];
> + pci_ep_ioctl(PCITEST_READ, ¶m);
> + EXPECT_FALSE(ret) TH_LOG("Test failed for size (%ld)",
> + test_size[i]);
> + }
> +}
> +
> +TEST_F(pci_ep_data_transfer, WRITE_TEST)
> +{
> + struct pci_endpoint_test_xfer_param param = {};
> + int ret, i;
> +
> + if (variant->use_dma)
> + param.flags = PCITEST_FLAGS_USE_DMA;
> +
> + pci_ep_ioctl(PCITEST_SET_IRQTYPE, 1);
> + ASSERT_EQ(0, ret) TH_LOG("Can't set MSI IRQ type");
> +
> + for (i = 0; i < ARRAY_SIZE(test_size); i++) {
> + param.size = test_size[i];
> + pci_ep_ioctl(PCITEST_WRITE, ¶m);
> + EXPECT_FALSE(ret) TH_LOG("Test failed for size (%ld)",
> + test_size[i]);
> + }
> +}
> +
> +TEST_F(pci_ep_data_transfer, COPY_TEST)
> +{
> + struct pci_endpoint_test_xfer_param param = {};
> + int ret, i;
> +
> + if (variant->use_dma)
> + param.flags = PCITEST_FLAGS_USE_DMA;
> +
> + pci_ep_ioctl(PCITEST_SET_IRQTYPE, 1);
> + ASSERT_EQ(0, ret) TH_LOG("Can't set MSI IRQ type");
> +
> + for (i = 0; i < ARRAY_SIZE(test_size); i++) {
> + param.size = test_size[i];
> + pci_ep_ioctl(PCITEST_COPY, ¶m);
> + EXPECT_FALSE(ret) TH_LOG("Test failed for size (%ld)",
> + test_size[i]);
> + }
> +}
> +TEST_HARNESS_MAIN
> diff --git a/tools/testing/selftests/pci_endpoint/pcitest.c b/tools/testing/selftests/pci_endpoint/pcitest.c
> deleted file mode 100644
> index b96cc118839b..000000000000
> --- a/tools/testing/selftests/pci_endpoint/pcitest.c
> +++ /dev/null
> @@ -1,265 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/**
> - * Userspace PCI Endpoint Test Module
> - *
> - * Copyright (C) 2017 Texas Instruments
> - * Author: Kishon Vijay Abraham I <kishon@xxxxxx>
> - */
> -
> -#include <errno.h>
> -#include <fcntl.h>
> -#include <stdbool.h>
> -#include <stdio.h>
> -#include <stdlib.h>
> -#include <sys/ioctl.h>
> -#include <unistd.h>
> -
> -#include <linux/pcitest.h>
> -
> -static char *irq[] = { "LEGACY", "MSI", "MSI-X" };
> -
> -struct pci_test {
> - char *device;
> - char barnum;
> - bool consecutive_bar_test;
> - bool legacyirq;
> - unsigned int msinum;
> - unsigned int msixnum;
> - int irqtype;
> - bool set_irqtype;
> - bool get_irqtype;
> - bool clear_irq;
> - bool read;
> - bool write;
> - bool copy;
> - unsigned long size;
> - bool use_dma;
> -};
> -
> -static int run_test(struct pci_test *test)
> -{
> - struct pci_endpoint_test_xfer_param param = {};
> - int ret = -EINVAL;
> - int fd;
> -
> - fd = open(test->device, O_RDWR);
> - if (fd < 0) {
> - perror("can't open PCI Endpoint Test device");
> - return -ENODEV;
> - }
> -
> - if (test->barnum >= 0 && test->barnum <= 5) {
> - ret = ioctl(fd, PCITEST_BAR, test->barnum);
> - fprintf(stdout, "BAR%d:\t\t", test->barnum);
> - if (ret < 0)
> - fprintf(stdout, "NOT OKAY\n");
> - else
> - fprintf(stdout, "OKAY\n");
> - }
> -
> - if (test->consecutive_bar_test) {
> - ret = ioctl(fd, PCITEST_BARS);
> - fprintf(stdout, "Consecutive BAR test:\t\t");
> - if (ret < 0)
> - fprintf(stdout, "NOT OKAY\n");
> - else
> - fprintf(stdout, "OKAY\n");
> - }
> -
> - if (test->set_irqtype) {
> - ret = ioctl(fd, PCITEST_SET_IRQTYPE, test->irqtype);
> - fprintf(stdout, "SET IRQ TYPE TO %s:\t\t", irq[test->irqtype]);
> - if (ret < 0)
> - fprintf(stdout, "NOT OKAY\n");
> - else
> - fprintf(stdout, "OKAY\n");
> - }
> -
> - if (test->get_irqtype) {
> - ret = ioctl(fd, PCITEST_GET_IRQTYPE);
> - fprintf(stdout, "GET IRQ TYPE:\t\t");
> - if (ret < 0) {
> - fprintf(stdout, "NOT OKAY\n");
> - } else {
> - fprintf(stdout, "%s\n", irq[ret]);
> - ret = 0;
> - }
> - }
> -
> - if (test->clear_irq) {
> - ret = ioctl(fd, PCITEST_CLEAR_IRQ);
> - fprintf(stdout, "CLEAR IRQ:\t\t");
> - if (ret < 0)
> - fprintf(stdout, "NOT OKAY\n");
> - else
> - fprintf(stdout, "OKAY\n");
> - }
> -
> - if (test->legacyirq) {
> - ret = ioctl(fd, PCITEST_LEGACY_IRQ, 0);
> - fprintf(stdout, "LEGACY IRQ:\t");
> - if (ret < 0)
> - fprintf(stdout, "NOT OKAY\n");
> - else
> - fprintf(stdout, "OKAY\n");
> - }
> -
> - if (test->msinum > 0 && test->msinum <= 32) {
> - ret = ioctl(fd, PCITEST_MSI, test->msinum);
> - fprintf(stdout, "MSI%u:\t\t", test->msinum);
> - if (ret < 0)
> - fprintf(stdout, "NOT OKAY\n");
> - else
> - fprintf(stdout, "OKAY\n");
> - }
> -
> - if (test->msixnum > 0 && test->msixnum <= 2048) {
> - ret = ioctl(fd, PCITEST_MSIX, test->msixnum);
> - fprintf(stdout, "MSI-X%u:\t\t", test->msixnum);
> - if (ret < 0)
> - fprintf(stdout, "NOT OKAY\n");
> - else
> - fprintf(stdout, "OKAY\n");
> - }
> -
> - if (test->write) {
> - param.size = test->size;
> - if (test->use_dma)
> - param.flags = PCITEST_FLAGS_USE_DMA;
> - ret = ioctl(fd, PCITEST_WRITE, ¶m);
> - fprintf(stdout, "WRITE (%7lu bytes):\t\t", test->size);
> - if (ret < 0)
> - fprintf(stdout, "NOT OKAY\n");
> - else
> - fprintf(stdout, "OKAY\n");
> - }
> -
> - if (test->read) {
> - param.size = test->size;
> - if (test->use_dma)
> - param.flags = PCITEST_FLAGS_USE_DMA;
> - ret = ioctl(fd, PCITEST_READ, ¶m);
> - fprintf(stdout, "READ (%7lu bytes):\t\t", test->size);
> - if (ret < 0)
> - fprintf(stdout, "NOT OKAY\n");
> - else
> - fprintf(stdout, "OKAY\n");
> - }
> -
> - if (test->copy) {
> - param.size = test->size;
> - if (test->use_dma)
> - param.flags = PCITEST_FLAGS_USE_DMA;
> - ret = ioctl(fd, PCITEST_COPY, ¶m);
> - fprintf(stdout, "COPY (%7lu bytes):\t\t", test->size);
> - if (ret < 0)
> - fprintf(stdout, "NOT OKAY\n");
> - else
> - fprintf(stdout, "OKAY\n");
> - }
> -
> - fflush(stdout);
> - close(fd);
> - return ret;
> -}
> -
> -int main(int argc, char **argv)
> -{
> - int c;
> - struct pci_test *test;
> -
> - test = calloc(1, sizeof(*test));
> - if (!test) {
> - perror("Fail to allocate memory for pci_test\n");
> - return -ENOMEM;
> - }
> -
> - /* since '0' is a valid BAR number, initialize it to -1 */
> - test->barnum = -1;
> -
> - /* set default size as 100KB */
> - test->size = 0x19000;
> -
> - /* set default endpoint device */
> - test->device = "/dev/pci-endpoint-test.0";
> -
> - while ((c = getopt(argc, argv, "D:b:Cm:x:i:deIlhrwcs:")) != EOF)
> - switch (c) {
> - case 'D':
> - test->device = optarg;
> - continue;
> - case 'b':
> - test->barnum = atoi(optarg);
> - if (test->barnum < 0 || test->barnum > 5)
> - goto usage;
> - continue;
> - case 'C':
> - test->consecutive_bar_test = true;
> - continue;
> - case 'l':
> - test->legacyirq = true;
> - continue;
> - case 'm':
> - test->msinum = atoi(optarg);
> - if (test->msinum < 1 || test->msinum > 32)
> - goto usage;
> - continue;
> - case 'x':
> - test->msixnum = atoi(optarg);
> - if (test->msixnum < 1 || test->msixnum > 2048)
> - goto usage;
> - continue;
> - case 'i':
> - test->irqtype = atoi(optarg);
> - if (test->irqtype < 0 || test->irqtype > 2)
> - goto usage;
> - test->set_irqtype = true;
> - continue;
> - case 'I':
> - test->get_irqtype = true;
> - continue;
> - case 'r':
> - test->read = true;
> - continue;
> - case 'w':
> - test->write = true;
> - continue;
> - case 'c':
> - test->copy = true;
> - continue;
> - case 'e':
> - test->clear_irq = true;
> - continue;
> - case 's':
> - test->size = strtoul(optarg, NULL, 0);
> - continue;
> - case 'd':
> - test->use_dma = true;
> - continue;
> - case 'h':
> - default:
> -usage:
> - fprintf(stderr,
> - "usage: %s [options]\n"
> - "Options:\n"
> - "\t-D <dev> PCI endpoint test device {default: /dev/pci-endpoint-test.0}\n"
> - "\t-b <bar num> BAR test (bar number between 0..5)\n"
> - "\t-C Consecutive BAR test\n"
> - "\t-m <msi num> MSI test (msi number between 1..32)\n"
> - "\t-x <msix num> \tMSI-X test (msix number between 1..2048)\n"
> - "\t-i <irq type> \tSet IRQ type (0 - Legacy, 1 - MSI, 2 - MSI-X)\n"
> - "\t-e Clear IRQ\n"
> - "\t-I Get current IRQ type configured\n"
> - "\t-d Use DMA\n"
> - "\t-l Legacy IRQ test\n"
> - "\t-r Read buffer test\n"
> - "\t-w Write buffer test\n"
> - "\t-c Copy buffer test\n"
> - "\t-s <size> Size of buffer {default: 100KB}\n"
> - "\t-h Print this help message\n",
> - argv[0]);
> - return -EINVAL;
> - }
> -
> - return run_test(test);
> -}
> diff --git a/tools/testing/selftests/pci_endpoint/pcitest.sh b/tools/testing/selftests/pci_endpoint/pcitest.sh
> deleted file mode 100644
> index 770f4d6df34b..000000000000
> --- a/tools/testing/selftests/pci_endpoint/pcitest.sh
> +++ /dev/null
> @@ -1,73 +0,0 @@
> -#!/bin/sh
> -# SPDX-License-Identifier: GPL-2.0
> -
> -echo "BAR tests"
> -echo
> -
> -bar=0
> -
> -while [ $bar -lt 6 ]
> -do
> - pcitest -b $bar
> - bar=`expr $bar + 1`
> -done
> -pcitest -C
> -echo
> -
> -echo "Interrupt tests"
> -echo
> -
> -pcitest -i 0
> -pcitest -l
> -
> -pcitest -i 1
> -msi=1
> -
> -while [ $msi -lt 33 ]
> -do
> - pcitest -m $msi
> - msi=`expr $msi + 1`
> -done
> -echo
> -
> -pcitest -i 2
> -msix=1
> -
> -while [ $msix -lt 2049 ]
> -do
> - pcitest -x $msix
> - msix=`expr $msix + 1`
> -done
> -echo
> -
> -echo "Read Tests"
> -echo
> -
> -pcitest -i 1
> -
> -pcitest -r -s 1
> -pcitest -r -s 1024
> -pcitest -r -s 1025
> -pcitest -r -s 1024000
> -pcitest -r -s 1024001
> -echo
> -
> -echo "Write Tests"
> -echo
> -
> -pcitest -w -s 1
> -pcitest -w -s 1024
> -pcitest -w -s 1025
> -pcitest -w -s 1024000
> -pcitest -w -s 1024001
> -echo
> -
> -echo "Copy Tests"
> -echo
> -
> -pcitest -c -s 1
> -pcitest -c -s 1024
> -pcitest -c -s 1025
> -pcitest -c -s 1024000
> -pcitest -c -s 1024001
> -echo
> --
> 2.25.1
>
Reviewed-by: Niklas Cassel <cassel@xxxxxxxxxx>
