Hi Krzysztof, On 11/21/2024 12:47 AM, Krzysztof Kozlowski wrote: > On 20/11/2024 10:54, Cheng Jiang wrote: >> Several Qualcomm projects will use the same Bluetooth chip, each >> focusing on different features. For instance, consumer projects >> prioritize the A2DP SRC feature, while IoT projects focus on the A2DP >> SINK feature, which may have more optimizations for coexistence when >> acting as a SINK. Due to the patch size, it is not feasible to include >> all features in a single firmware. >> >> Therefore, the 'product-variant' devicetree property is used to provide >> product information for the Bluetooth driver to load the appropriate >> firmware. >> >> If this property is not defined, the default firmware will be loaded, >> ensuring there are no backward compatibility issues with older >> devicetrees. >> >> The product-variant defines like this: >> 0 - 15 (16 bits) are product line specific definitions >> 16 - 23 (8 bits) are for the product line. >> 24 - 31 (8 bits) are reserved for future use, 0 currently >> >> |---------------------------------------------------------------------| >> | 32 Bits | >> |---------------------------------------------------------------------| >> | 31 - 24 (bits) | 23 - 16 (bits) | 15 - 0 (16 bits) | >> |---------------------------------------------------------------------| >> | Reserved | 0: default | 0: default | >> | | 1: CE | | >> | | 2: IoT | | >> | | 3: Auto | | >> | | 4: Reserved | | >> |---------------------------------------------------------------------| >> >> Signed-off-by: Cheng Jiang <quic_chejiang@xxxxxxxxxxx> >> --- >> .../bindings/net/bluetooth/qualcomm-bluetooth.yaml | 6 ++++++ >> 1 file changed, 6 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml >> index 7bb68311c609..9019fe7bcdc6 100644 >> --- a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml >> +++ b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml >> @@ -110,6 +110,12 @@ properties: >> description: >> boot firmware is incorrectly passing the address in big-endian order >> >> + qcom,product-variant: >> + $ref: /schemas/types.yaml#/definitions/uint32 >> + description: >> + specify the product information for driver to load the appropriate firmware > > Nah, you have firmware-name for this. > Currently "firmware-name" is used to specifythe nvm (config) file only, we also need to specify the rampatch file (TLV). Can we re-use the "firmware-name"? add two segments like the following? firmware-name = "rampatch_xx.tlv", "nvm_xx.bin"; Or add a new property to specify the rampatch file? rampatch-name = "rampatch_xx.tlv"; Thanks! > >> + >> + > No clue why two blank lines... > > Best regards, > Krzysztof
