[PATCH v3 1/2] arm64: dts: qcom: qcs615: add SDHC1 and SDHC2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add SDHC1 and SDHC2 support to the QCS615 Ride platform.

Signed-off-by: Yuanjie Yang <quic_yuanjiey@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/qcs615.dtsi | 198 +++++++++++++++++++++++++++
 1 file changed, 198 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs615.dtsi b/arch/arm64/boot/dts/qcom/qcs615.dtsi
index 590beb37f441..37c6ab217c96 100644
--- a/arch/arm64/boot/dts/qcom/qcs615.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs615.dtsi
@@ -399,6 +399,65 @@ qfprom: efuse@780000 {
 			#size-cells = <1>;
 		};
 
+		sdhc_1: mmc@7c4000 {
+			compatible = "qcom,qcs615-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x007c4000 0x0 0x1000>,
+			      <0x0 0x007c5000 0x0 0x1000>;
+			reg-names = "hc",
+				    "cqhci";
+
+			interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq",
+					  "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "xo",
+				      "ice";
+
+			resets = <&gcc GCC_SDCC1_BCR>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
+			iommus = <&apps_smmu 0x02c0 0x0>;
+			interconnects = <&aggre1_noc MASTER_SDCC_1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_SDCC_1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+
+			bus-width = <8>;
+			qcom,dll-config = <0x000f642c>;
+			qcom,ddr-config = <0x80040868>;
+			supports-cqe;
+			dma-coherent;
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+			mmc-hs400-1_8v;
+			mmc-hs400-enhanced-strobe;
+			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
+		};
+
 		qupv3_id_0: geniqup@8c0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0x0 0x008c0000 0x0 0x6000>;
@@ -494,6 +553,145 @@ qup_uart0_rx: qup-uart0-rx-state {
 				pins = "gpio17";
 				function = "qup0";
 			};
+
+			sdc1_state_on: sdc1-on-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_state_off: sdc1-off-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc2_state_on: sdc2-on-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+			};
+
+			sdc2_state_off: sdc2-off-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+		};
+
+		sdhc_2: mmc@8804000 {
+			compatible = "qcom,qcs615-sdhci","qcom,sdhci-msm-v5";
+			reg = <0x0 0x08804000 0x0 0x1000>;
+			reg-names = "hc";
+
+			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq",
+					  "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+			iommus = <&apps_smmu 0x02a0 0x0>;
+			resets = <&gcc GCC_SDCC2_BCR>;
+			interconnects = <&aggre1_noc MASTER_SDCC_2 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+
+			bus-width = <4>;
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+			dma-coherent;
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
 		};
 
 		dc_noc: interconnect@9160000 {
-- 
2.34.1





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux