On Thu, Nov 14, 2024 at 09:52:12AM +0530, Sibi Sankar wrote: > On 11/8/24 20:44, Johan Hovold wrote: > >> On Wed, Nov 06, 2024 at 01:55:33PM +0100, Johan Hovold wrote: > >>> Second, after loading the protocol and client drivers manually (in that > >>> order, shouldn't the client driver pull in the protocol?), I got: > >>> > >>> scmi_module: Loaded SCMI Vendor Protocol 0x80 - Qualcomm 20000 > >>> arm-scmi arm-scmi.0.auto: QCOM Generic Vendor Version 1.0 > >>> scmi-qcom-generic-ext-memlat scmi_dev.5: error -EOPNOTSUPP: failed to configure common events > >>> scmi-qcom-generic-ext-memlat scmi_dev.5: probe with driver scmi-qcom-generic-ext-memlat failed with error -95 > >>> > >>> which seems to suggest that the firmware on my CRD does not support this > >>> feature. Is that the way this should be interpreted? And does that mean > >>> that non of the commercial laptops supports this either? > > Yeah, hopefully Sibi can shed some light on this. I'm using the DT > > patch (5/5) from this series, which according to the commit message is > > supposed to enable bus scaling on the x1e80100 platform. So I guess > > something is missing in my firmware. > > Nah, it's probably just because of the algo string used. > The past few series used caps MEMLAT string instead of > memlat to pass the tuneables, looks like all the laptops > havn't really switched to it yet. Will revert back to > using to lower case memlat so that all devices are > supported. Thanks for trying the series out! I have a Lenovo ThinkPad T14s set up now so I gave this series a spin there too, and there I do *not* see the above mentioned -EOPNOSUPP error and the memlat driver probes successfully. On the other hand, this series seems to have no effect on a kernel compilation benchmark. Is that expected? And does this mean that you should stick with the uppercase "MEMLAT" string after all? The firmware on my CRD is not the latest one, but I am using the latest available firmware for the T14s. Johan
