Re: [PATCH RESEND v17 3/5] iommu/arm-smmu: add support for PRR bit setup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 11/20/2024 10:47 PM, Rob Clark wrote:
On Thu, Nov 14, 2024 at 8:10 AM Bibek Kumar Patro
<quic_bibekkum@xxxxxxxxxxx> wrote:

Add an adreno-smmu-priv interface for drm/msm to call
into arm-smmu-qcom and initiate the PRR bit setup or reset
sequence as per request.

This will be used by GPU to setup the PRR bit and related
configuration registers through adreno-smmu private
interface instead of directly poking the smmu hardware.

Suggested-by: Rob Clark <robdclark@xxxxxxxxx>
Signed-off-by: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
---
  drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 37 ++++++++++++++++++++++
  drivers/iommu/arm/arm-smmu/arm-smmu.h      |  2 ++
  include/linux/adreno-smmu-priv.h           | 14 ++++++++
  3 files changed, 53 insertions(+)

diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
index d26f5aea248e..0e4f3fbda961 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
@@ -16,6 +16,8 @@

  #define QCOM_DUMMY_VAL -1

+#define GFX_ACTLR_PRR          (1 << 5)
+
  static struct qcom_smmu *to_qcom_smmu(struct arm_smmu_device *smmu)
  {
         return container_of(smmu, struct qcom_smmu, smmu);
@@ -99,6 +101,32 @@ static void qcom_adreno_smmu_resume_translation(const void *cookie, bool termina
         arm_smmu_cb_write(smmu, cfg->cbndx, ARM_SMMU_CB_RESUME, reg);
  }

+static void qcom_adreno_smmu_set_prr_bit(const void *cookie, bool set)
+{
+       struct arm_smmu_domain *smmu_domain = (void *)cookie;
+       struct arm_smmu_device *smmu = smmu_domain->smmu;
+       struct arm_smmu_cfg *cfg = &smmu_domain->cfg;
+       u32 reg = 0;
+
+       reg =  arm_smmu_cb_read(smmu, cfg->cbndx, ARM_SMMU_CB_ACTLR);
+       reg &= ~GFX_ACTLR_PRR;
+       if (set)
+               reg |= FIELD_PREP(GFX_ACTLR_PRR, 1);
+       arm_smmu_cb_write(smmu, cfg->cbndx, ARM_SMMU_CB_ACTLR, reg);
+}
+
+static void qcom_adreno_smmu_set_prr_addr(const void *cookie, phys_addr_t page_addr)
+{
+       struct arm_smmu_domain *smmu_domain = (void *)cookie;
+       struct arm_smmu_device *smmu = smmu_domain->smmu;
+
+       writel_relaxed(lower_32_bits(page_addr),
+                               smmu->base + ARM_SMMU_GFX_PRR_CFG_LADDR);
+
+       writel_relaxed(upper_32_bits(page_addr),
+                               smmu->base + ARM_SMMU_GFX_PRR_CFG_UADDR);
+}
+
  #define QCOM_ADRENO_SMMU_GPU_SID 0

  static bool qcom_adreno_smmu_is_gpu_device(struct device *dev)
@@ -210,6 +238,7 @@ static bool qcom_adreno_can_do_ttbr1(struct arm_smmu_device *smmu)
  static int qcom_adreno_smmu_init_context(struct arm_smmu_domain *smmu_domain,
                 struct io_pgtable_cfg *pgtbl_cfg, struct device *dev)
  {
+       const struct device_node *np = smmu_domain->smmu->dev->of_node;
         struct adreno_smmu_priv *priv;

         smmu_domain->cfg.flush_walk_prefer_tlbiasid = true;
@@ -239,6 +268,14 @@ static int qcom_adreno_smmu_init_context(struct arm_smmu_domain *smmu_domain,
         priv->get_fault_info = qcom_adreno_smmu_get_fault_info;
         priv->set_stall = qcom_adreno_smmu_set_stall;
         priv->resume_translation = qcom_adreno_smmu_resume_translation;
+       priv->set_prr_bit = NULL;
+       priv->set_prr_addr = NULL;
+
+       if (of_device_is_compatible(np, "qcom,smmu-500") &&
+                       of_device_is_compatible(np, "qcom,adreno-smmu")) {

fwiw, it seems like PRR actually works on sc7180, which is _not_
mmu-500, so I guess the support actually goes back further.


As I checked sc7180 was on previous variant of SMMU,
so targets on this variant have different steps to set PRR bit.
<Do not have both prr bit and PRR page registers>.

It's MMU-500 targets only where PRR support is with both PRR bit
and PRR page addr registers. As I was re-visiting our discussions on v13
regarding this - I remember that's why we started using the SMMU-
compatible string based PRR procedure selection instead of the reserved-
memory node. [1] i.e Based on SMMU variant (as selected by compatible
string), specific sequence will be selected.

So for now only MMU-500 based selection has been supported as part of
this series and will add subsequent support for other SMMU-variants
thereafter.

I'm curious if we can just rely on this being supported by any hw that
has a6xx or newer?


I'd need to check on targets which will be based on a6xx onwards, on
what will be the procedure planned to support PRR feature. I'll update
the information over this space.

[1]: https://lore.kernel.org/all/5790afa3-f9c0-4720-9804-8a7ff3d91854@xxxxxxxxxxx/#:~:text=%3E%20I%20guess%20if,part%20as%20well.

Thanks & regards,
Bibek

BR,
-R

+               priv->set_prr_bit = qcom_adreno_smmu_set_prr_bit;
+               priv->set_prr_addr = qcom_adreno_smmu_set_prr_addr;
+       }

         return 0;
  }
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.h b/drivers/iommu/arm/arm-smmu/arm-smmu.h
index e2aeb511ae90..2dbf3243b5ad 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu.h
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu.h
@@ -154,6 +154,8 @@ enum arm_smmu_cbar_type {
  #define ARM_SMMU_SCTLR_M               BIT(0)

  #define ARM_SMMU_CB_ACTLR              0x4
+#define ARM_SMMU_GFX_PRR_CFG_LADDR     0x6008
+#define ARM_SMMU_GFX_PRR_CFG_UADDR     0x600C

  #define ARM_SMMU_CB_RESUME             0x8
  #define ARM_SMMU_RESUME_TERMINATE      BIT(0)
diff --git a/include/linux/adreno-smmu-priv.h b/include/linux/adreno-smmu-priv.h
index c637e0997f6d..614665153b3e 100644
--- a/include/linux/adreno-smmu-priv.h
+++ b/include/linux/adreno-smmu-priv.h
@@ -50,6 +50,18 @@ struct adreno_smmu_fault_info {
   *                 the GPU driver must call resume_translation()
   * @resume_translation: Resume translation after a fault
   *
+ * *CAUTION* : PRR callbacks (set_prr_bit/set_prr_addr) are NULL terminated for
+ *             targets without PRR support. Exercise caution and verify target
+ *             capabilities before invoking these callbacks to prevent potential
+ *             runtime errors or unexpected behavior.
+ *
+ * @set_prr_bit:   Extendible interface to be used by GPU to modify the
+ *                ACTLR register bits, currently used to configure
+ *                Partially-Resident-Region (PRR) bit for feature's
+ *                setup and reset sequence as requested.
+ * @set_prr_addr:  Configure the PRR_CFG_*ADDR register with the
+ *                physical address of PRR page passed from
+ *                GPU driver.
   *
   * The GPU driver (drm/msm) and adreno-smmu work together for controlling
   * the GPU's SMMU instance.  This is by necessity, as the GPU is directly
@@ -67,6 +79,8 @@ struct adreno_smmu_priv {
      void (*get_fault_info)(const void *cookie, struct adreno_smmu_fault_info *info);
      void (*set_stall)(const void *cookie, bool enabled);
      void (*resume_translation)(const void *cookie, bool terminate);
+    void (*set_prr_bit)(const void *cookie, bool set);
+    void (*set_prr_addr)(const void *cookie, phys_addr_t page_addr);
  };

  #endif /* __ADRENO_SMMU_PRIV_H */
--
2.34.1






[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux