Re: [PATCH RESEND v17 3/5] iommu/arm-smmu: add support for PRR bit setup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Nov 20, 2024 at 9:17 AM Rob Clark <robdclark@xxxxxxxxx> wrote:
>
> On Thu, Nov 14, 2024 at 8:10 AM Bibek Kumar Patro
> <quic_bibekkum@xxxxxxxxxxx> wrote:
> >
> > Add an adreno-smmu-priv interface for drm/msm to call
> > into arm-smmu-qcom and initiate the PRR bit setup or reset
> > sequence as per request.
> >
> > This will be used by GPU to setup the PRR bit and related
> > configuration registers through adreno-smmu private
> > interface instead of directly poking the smmu hardware.
> >
> > Suggested-by: Rob Clark <robdclark@xxxxxxxxx>
> > Signed-off-by: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
> > ---
> >  drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 37 ++++++++++++++++++++++
> >  drivers/iommu/arm/arm-smmu/arm-smmu.h      |  2 ++
> >  include/linux/adreno-smmu-priv.h           | 14 ++++++++
> >  3 files changed, 53 insertions(+)
> >
> > diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> > index d26f5aea248e..0e4f3fbda961 100644
> > --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> > +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> > @@ -16,6 +16,8 @@
> >
> >  #define QCOM_DUMMY_VAL -1
> >
> > +#define GFX_ACTLR_PRR          (1 << 5)
> > +
> >  static struct qcom_smmu *to_qcom_smmu(struct arm_smmu_device *smmu)
> >  {
> >         return container_of(smmu, struct qcom_smmu, smmu);
> > @@ -99,6 +101,32 @@ static void qcom_adreno_smmu_resume_translation(const void *cookie, bool termina
> >         arm_smmu_cb_write(smmu, cfg->cbndx, ARM_SMMU_CB_RESUME, reg);
> >  }
> >
> > +static void qcom_adreno_smmu_set_prr_bit(const void *cookie, bool set)
> > +{
> > +       struct arm_smmu_domain *smmu_domain = (void *)cookie;
> > +       struct arm_smmu_device *smmu = smmu_domain->smmu;
> > +       struct arm_smmu_cfg *cfg = &smmu_domain->cfg;
> > +       u32 reg = 0;
> > +
> > +       reg =  arm_smmu_cb_read(smmu, cfg->cbndx, ARM_SMMU_CB_ACTLR);
> > +       reg &= ~GFX_ACTLR_PRR;
> > +       if (set)
> > +               reg |= FIELD_PREP(GFX_ACTLR_PRR, 1);
> > +       arm_smmu_cb_write(smmu, cfg->cbndx, ARM_SMMU_CB_ACTLR, reg);
> > +}
> > +
> > +static void qcom_adreno_smmu_set_prr_addr(const void *cookie, phys_addr_t page_addr)
> > +{
> > +       struct arm_smmu_domain *smmu_domain = (void *)cookie;
> > +       struct arm_smmu_device *smmu = smmu_domain->smmu;
> > +
> > +       writel_relaxed(lower_32_bits(page_addr),
> > +                               smmu->base + ARM_SMMU_GFX_PRR_CFG_LADDR);
> > +
> > +       writel_relaxed(upper_32_bits(page_addr),
> > +                               smmu->base + ARM_SMMU_GFX_PRR_CFG_UADDR);
> > +}
> > +
> >  #define QCOM_ADRENO_SMMU_GPU_SID 0
> >
> >  static bool qcom_adreno_smmu_is_gpu_device(struct device *dev)
> > @@ -210,6 +238,7 @@ static bool qcom_adreno_can_do_ttbr1(struct arm_smmu_device *smmu)
> >  static int qcom_adreno_smmu_init_context(struct arm_smmu_domain *smmu_domain,
> >                 struct io_pgtable_cfg *pgtbl_cfg, struct device *dev)
> >  {
> > +       const struct device_node *np = smmu_domain->smmu->dev->of_node;
> >         struct adreno_smmu_priv *priv;
> >
> >         smmu_domain->cfg.flush_walk_prefer_tlbiasid = true;
> > @@ -239,6 +268,14 @@ static int qcom_adreno_smmu_init_context(struct arm_smmu_domain *smmu_domain,
> >         priv->get_fault_info = qcom_adreno_smmu_get_fault_info;
> >         priv->set_stall = qcom_adreno_smmu_set_stall;
> >         priv->resume_translation = qcom_adreno_smmu_resume_translation;
> > +       priv->set_prr_bit = NULL;
> > +       priv->set_prr_addr = NULL;
> > +
> > +       if (of_device_is_compatible(np, "qcom,smmu-500") &&
> > +                       of_device_is_compatible(np, "qcom,adreno-smmu")) {
>
> fwiw, it seems like PRR actually works on sc7180, which is _not_
> mmu-500, so I guess the support actually goes back further.
>
> I'm curious if we can just rely on this being supported by any hw that
> has a6xx or newer?


Also, unrelated, but we can't assume the smmu is powered when drm
driver calls set_prr_bit/addr, could you add in runpm get/put around
the register access?

Otherwise Conner and I have vk sparse residency working now

BR,
-R

>
> > +               priv->set_prr_bit = qcom_adreno_smmu_set_prr_bit;
> > +               priv->set_prr_addr = qcom_adreno_smmu_set_prr_addr;
> > +       }
> >
> >         return 0;
> >  }
> > diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.h b/drivers/iommu/arm/arm-smmu/arm-smmu.h
> > index e2aeb511ae90..2dbf3243b5ad 100644
> > --- a/drivers/iommu/arm/arm-smmu/arm-smmu.h
> > +++ b/drivers/iommu/arm/arm-smmu/arm-smmu.h
> > @@ -154,6 +154,8 @@ enum arm_smmu_cbar_type {
> >  #define ARM_SMMU_SCTLR_M               BIT(0)
> >
> >  #define ARM_SMMU_CB_ACTLR              0x4
> > +#define ARM_SMMU_GFX_PRR_CFG_LADDR     0x6008
> > +#define ARM_SMMU_GFX_PRR_CFG_UADDR     0x600C
> >
> >  #define ARM_SMMU_CB_RESUME             0x8
> >  #define ARM_SMMU_RESUME_TERMINATE      BIT(0)
> > diff --git a/include/linux/adreno-smmu-priv.h b/include/linux/adreno-smmu-priv.h
> > index c637e0997f6d..614665153b3e 100644
> > --- a/include/linux/adreno-smmu-priv.h
> > +++ b/include/linux/adreno-smmu-priv.h
> > @@ -50,6 +50,18 @@ struct adreno_smmu_fault_info {
> >   *                 the GPU driver must call resume_translation()
> >   * @resume_translation: Resume translation after a fault
> >   *
> > + * *CAUTION* : PRR callbacks (set_prr_bit/set_prr_addr) are NULL terminated for
> > + *             targets without PRR support. Exercise caution and verify target
> > + *             capabilities before invoking these callbacks to prevent potential
> > + *             runtime errors or unexpected behavior.
> > + *
> > + * @set_prr_bit:   Extendible interface to be used by GPU to modify the
> > + *                ACTLR register bits, currently used to configure
> > + *                Partially-Resident-Region (PRR) bit for feature's
> > + *                setup and reset sequence as requested.
> > + * @set_prr_addr:  Configure the PRR_CFG_*ADDR register with the
> > + *                physical address of PRR page passed from
> > + *                GPU driver.
> >   *
> >   * The GPU driver (drm/msm) and adreno-smmu work together for controlling
> >   * the GPU's SMMU instance.  This is by necessity, as the GPU is directly
> > @@ -67,6 +79,8 @@ struct adreno_smmu_priv {
> >      void (*get_fault_info)(const void *cookie, struct adreno_smmu_fault_info *info);
> >      void (*set_stall)(const void *cookie, bool enabled);
> >      void (*resume_translation)(const void *cookie, bool terminate);
> > +    void (*set_prr_bit)(const void *cookie, bool set);
> > +    void (*set_prr_addr)(const void *cookie, phys_addr_t page_addr);
> >  };
> >
> >  #endif /* __ADRENO_SMMU_PRIV_H */
> > --
> > 2.34.1
> >





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux