On Wed, Nov 20, 2024 at 05:05:50PM +0530, Soutrik Mukhopadhyay wrote:
>
> On 11/20/2024 4:42 PM, Dmitry Baryshkov wrote:
> > On Wed, Nov 20, 2024 at 04:29:54PM +0530, Soutrik Mukhopadhyay wrote:
> > > Enable DPTX0 and DPTX1 along with their corresponding PHYs for
> > > sa8775p-ride platform.
> > > > Signed-off-by: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
> > > ---
> > > arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi | 80 ++++++++++++++++++++++
> > > 1 file changed, 80 insertions(+)
> > > > diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
> > b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
> > > index adb71aeff339..4847e4942386 100644
> > > --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
> > > +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
> > > @@ -27,6 +27,30 @@
> > > chosen {
> > > stdout-path = "serial0:115200n8";
> > > };
> > > +
> > > + dp0-connector {
> > > + compatible = "dp-connector";
> > > + label = "DP0";
> >
> > Thundercomm's SA8775p RIDE platform doesn't show such a connector. At
> > least not on a device advertised on the web pages.
>
>
> Are you referring to this product in the Thundercomm web page : SA8225P and
> SA8775P
> Ride SX 4.0 Automotive Development Platform ?
Yes
> For this particular product we
> can see
> eDP 0/1/2/3 serving as the dp connectors.
Please correct the labels then. And also please mention why eDP2/3 are
not included / tested.
>
>
> >
> > > + type = "full-size";
> > > +
> > > + port {
> > > + dp0_connector_in: endpoint {
> > > + remote-endpoint = <&mdss0_dp0_out>;
> > > + };
> > > + };
> > > + };
> > > +
> > > + dp1-connector {
> > > + compatible = "dp-connector";
> > > + label = "DP1";
> >
> > Same comment here.
> >
> > > + type = "full-size";
> > > +
> > > + port {
> > > + dp1_connector_in: endpoint {
> > > + remote-endpoint = <&mdss0_dp1_out>;
> > > + };
> > > + };
> > > + };
> > > };
> > > > &apps_rsc {
> >
--
With best wishes
Dmitry
