On 20.11.2024 12:53 PM, Soutrik Mukhopadhyay wrote:
>
> On 11/20/2024 5:13 PM, Dmitry Baryshkov wrote:
>> On Wed, Nov 20, 2024 at 05:05:50PM +0530, Soutrik Mukhopadhyay wrote:
>> > > On 11/20/2024 4:42 PM, Dmitry Baryshkov wrote:
>> > > On Wed, Nov 20, 2024 at 04:29:54PM +0530, Soutrik Mukhopadhyay wrote:
>> > > > Enable DPTX0 and DPTX1 along with their corresponding PHYs for
>> > > > sa8775p-ride platform.
>> > > > > Signed-off-by: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
>> > > > ---
>> > > > arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi | 80 ++++++++++++++++++++++
>> > > > 1 file changed, 80 insertions(+)
>> > > > > diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
>> > > b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
>> > > > index adb71aeff339..4847e4942386 100644
>> > > > --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
>> > > > +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
>> > > > @@ -27,6 +27,30 @@
>> > > > chosen {
>> > > > stdout-path = "serial0:115200n8";
>> > > > };
>> > > > +
>> > > > + dp0-connector {
>> > > > + compatible = "dp-connector";
>> > > > + label = "DP0";
>> > > > > Thundercomm's SA8775p RIDE platform doesn't show such a connector. At
>> > > least not on a device advertised on the web pages.
>> > > > Are you referring to this product in the Thundercomm web page : SA8225P and
>> > SA8775P
>> > Ride SX 4.0 Automotive Development Platform ?
>>
>> Yes
>>
>> > For this particular product we
>> > can see
>> > eDP 0/1/2/3 serving as the dp connectors.
>>
>> Please correct the labels then. And also please mention why eDP2/3 are
>> not included / tested.
>
>
> Sure, we will update the labels in the upcoming patchset.
> edp 0/1 corresponds to mdss0_dptx0 and mdss0_dptx1. We have validated only these.
> edp 2/3 corresponds to mdss1_dptx0 and mdss1_dptx1, and these are not validated,
> as already mentioned during the driver changes for the same.
> Should we mention the same in the commit message for the upcoming patchset ?
So the box on the store page has these 4 ports next to each other..
Please take the additional 2 minutes and plug in a monitor to the
other two ones as well.
Konrad
