Libvirt Users

• Thread Index

• Unable to connect qemu:///system on CentOS 6.2 X86_64
  • From: suyi wang
• PCI-X card controlled by VM
  • From: Daniel Gonzalez
• Re: Booting virtual machines automatically
  • From: Daniel Gonzalez
• Re: can't add cpu's to virtual guest
  • From: Alex Jia
• can't add cpu's to virtual guest
  • From: David M. Barlieb
• Solution for Address family not supported by protocol
  • From: 4k3nd0
• Resource overcommit
  • From: Jatin Kumar
• Re: [LXC] Attempt to start X in guest makes host X die
  • From: Robin Green
• [LXC] Attempt to start X in guest makes host X die
  • From: Robin Green
• Re: [libvirt-users] Rebélate by self-management, first project of free software by which we bet all / Rebélate por la autogestión, primer proyecto de software libre por el que apostamos todas
  • From: Dale Amon
• Rebélate by self-management, first project of free software by which we bet all / Rebélate por la autogestión, primer proyecto de software libre por el que apostamos todas
  • From: Orquidea Salt mas
• vhost-net support in ethernet domian
  • From: Tomasz Paszkowski
• Re: libvirt-manager , details / console ...
  • From: Marko Weber
• Migration of a vm consuming high cpu
  • From: Jatin Kumar
• Re: libvirt-manager , details / console ...
  • From: Evaggelos Balaskas
• Re: Booting virtual machines automatically
  • From: Alex Jia
• Booting virtual machines automatically
  • From: Daniel Gonzalez
• Re: libvirt-manager , details / console ...
  • From: Eric Blake
• libvirt-manager , details / console ...
  • From: Marko Weber
• Re: Problems running virtual machines after an upgrade
  • From: Jiri Denemark
• Re: Virtualizing a an old SuSE system
  • From: Dale Amon
• Fwd: Unable to connect qemu:///system on Fedora16 X86_64
  • From: suyi wang
• Re: Unable to connect qemu:///system on Fedora16 X86_64
  • From: Eric Blake
• Re: Virtualizing a an old SuSE system
  • From: Cole Robinson
• Unable to connect qemu:///system on Fedora16 X86_64
  • From: suyi wang
• Re: Bug? virGetLastError() returns NULL after virDomainCreate() if Domain running already
  • From: Eric Blake
• Re: Sys::Virt
  • From: Evaggelos Balaskas
• Re: Sys::Virt
  • From: Alex Jia
• Re: Bug? virGetLastError() returns NULL after virDomainCreate() if Domain running already
  • From: Guido Winkelmann
• Re: Virtualizing a an old SuSE system
  • From: Dale Amon
• Re: Virtualizing a an old SuSE system
  • From: Eric Blake
• Re: Virtualizing a an old SuSE system
  • From: Dale Amon
• Re: Virtualizing a an old SuSE system
  • From: Eric Blake
• Re: qemu - could not load kernel and dynamic ownership setting
  • From: Shantanu Pavgi
• Re: Sys::Virt
  • From: Evaggelos Balaskas
• Re: Sys::Virt
  • From: Evaggelos Balaskas
• Re: Sys::Virt
  • From: Alex Jia
• Virtualizing a an old SuSE system
  • From: Dale Amon
• Sys::Virt
  • From: Evaggelos Balaskas
• Re: Problems running virtual machines after an upgrade
  • From: Bhasker C V
• Re: Problems running virtual machines after an upgrade
  • From: Eric Blake
• Problems running virtual machines after an upgrade
  • From: Bhasker C V
• Not able to mount iSCSI volume to Guest VM
  • From: Sarath P R
• Re: lockmanager for use with clvm
  • From: Eric Blake
• Re: qemu - could not load kernel and dynamic ownership setting
  • From: Eric Blake
• Regarding file vs block devices for the guest
  • From: Udayan Bapat
• qemu - could not load kernel and dynamic ownership setting
  • From: Shantanu Pavgi
• Re: Bug? virGetLastError() returns NULL after virDomainCreate() if Domain running already
  • From: Guido Winkelmann
• Re: lockmanager for use with clvm
  • From: Alex Jia
• Re: Bug? virGetLastError() returns NULL after virDomainCreate() if Domain running already
  • From: Guido Winkelmann
• lockmanager for use with clvm
  • From: Michael Menge
• Re: [SeaBIOS] RFE: Print amount of RAM
  • From: Igor Galić
• Re: [libvirt] RFC: <memory units=...> [was: libvirt doesn't boot kVM, hangs, qemu on 100% CPU]
  • From: Christophe Fergeau
• Re: [libvirt] RFC: <memory units=...> [was: libvirt doesn't boot kVM, hangs, qemu on 100% CPU]
  • From: Dave Allan
• Re: libvirt doesn't boot kVM, hangs, qemu on 100% CPU
  • From: Igor Galić
• RFC: <memory units=...> [was: libvirt doesn't boot kVM, hangs, qemu on 100% CPU]
  • From: Eric Blake
• Re: Bug? virGetLastError() returns NULL after virDomainCreate() if Domain running already
  • From: Eric Blake
• Re: Bug? virGetLastError() returns NULL after virDomainCreate() if Domain running already
  • From: Eric Blake
• Bug? virGetLastError() returns NULL after virDomainCreate() if Domain running already
  • From: Guido Winkelmann
• Re: [libvirt] a question about sanlock
  • From: Daniel P. Berrange
• [libvirt] a question about sanlock
  • From: Alex Jia
• Re: libvirt doesn't boot kVM, hangs, qemu on 100% CPU
  • From: Eric Blake
• libvirt doesn't boot kVM, hangs, qemu on 100% CPU
  • From: Igor Galić
• Re: libvirt -user'question
  • From: Matthias Bolte
• Re: libvirt -user'question
  • From: Eric Blake
• libvirt -user'question
  • From: 冰淇淋
• Re: the probelm in using libvirt to connect esx server
  • From: Matthias Bolte
• the probelm in using libvirt to connect esx server
  • From: 冰淇淋
• Re: Error deleting a volume
  • From: Alex Jia
• Re: Error deleting a volume
  • From: Bo Bo
• Re: Error deleting a volume
  • From: Alex Jia
• Error deleting a volume
  • From: Bo Bo
• Re: Detecting Co-residency of VMs on KVM
  • From: Shikhar Agarwal
• Re: Detach devices using Libvirt+Xen
  • From: Daniel Espling
• Re: Detecting Co-residency of VMs on KVM
  • From: Whit Blauvelt
• Re: Detecting Co-residency of VMs on KVM
  • From: Eric Blake
• Detecting Co-residency of VMs on KVM
  • From: Shikhar Agarwal
• Re: qcow2 performance
  • From: Stefan G. Weichinger
• Re: [libvirt] Fail to import available VM image
  • From: Jun Koi
• Re: [libvirt] Fail to import available VM image
  • From: Alex Jia
• Re: [libvirt] Fail to import available VM image
  • From: Alex Jia
• Re: [libvirt] Fail to import available VM image
  • From: Jun Koi
• Re: [libvirt] Fail to import available VM image
  • From: Alex Jia
• Re: [libvirt] Fail to import available VM image
  • From: Jun Koi
• Re: [libvirt] Fail to import available VM image
  • From: Alex Jia
• Re: [libvirt] Fail to import available VM image
  • From: Laine Stump
• Re: QEMU hook on restore
  • From: Székelyi Szabolcs
• Re: Detach devices using Libvirt+Xen
  • From: Eric Blake
• Re: QEMU hook on restore
  • From: Laine Stump
• Re: libvirtd restore error?
  • From: Osier Yang
• libvirtd restore error?
  • From: lee
• Re: virt-manager thru window's remote desktop
  • From: Hisao Taguchi
• Re: virt-manager thru window's remote desktop
  • From: Hisao Taguchi
• Re: virt-manager thru window's remote desktop
  • From: Trey Dockendorf
• Re: QEMU hook on restore
  • From: Székelyi Szabolcs
• Re: QEMU hook on restore
  • From: Székelyi Szabolcs
• virt-manager thru window's remote desktop
  • From: Hisao Taguchi
• java binding
  • From: Maurizio Paone
• Re: QEMU hook on restore
  • From: Laine Stump
• exposing <actual> [was: QEMU hook on restore]
  • From: Eric Blake
• Re: QEMU hook on restore
  • From: Laine Stump
• Re: QEMU hook on restore
  • From: Eric Blake
• Re: QEMU hook on restore
  • From: Laine Stump
• Re: QEMU hook on restore
  • From: Eric Blake
• Re: Unable to collect VM metrics for ESX using libvirt
  • From: Eric Blake
• Unable to collect VM metrics for ESX using libvirt
  • From: sethu subbiah
• Re: virsh migrate results in error: Timed out during operation: cannot acquire state change lock
  • From: Eric Blake
• QEMU hook on restore
  • From: Székelyi Szabolcs
• Re: Detach devices using Libvirt+Xen
  • From: Daniel Espling
• Re: virsh migrate results in error: Timed out during operation: cannot acquire state change lock
  • From: Nuno Sousa
• Detach devices using Libvirt+Xen
  • From: Daniel Espling
• Re: want to access the page file of VM from host on Xen platform
  • From: Eric Blake
• Re: virsh migrate results in error: Timed out during operation: cannot acquire state change lock
  • From: Eric Blake
• Re: want to access the page file of VM from host on Xen platform
  • From: Eric Blake
• want to access the page file of VM from host on Xen platform
  • From: Irfan Ahmed
• Re: bad IO on VM
  • From: Stefan G. Weichinger
• Re: bad IO on VM
  • From: Daniel P. Berrange
• virsh migrate results in error: Timed out during operation: cannot acquire state change lock
  • From: Nuno Sousa
• bad IO on VM
  • From: Akendo
• Re: serial console with virt-install
  • From: Cole Robinson
• Re: virt-install: "ERROR Host does not support any virtualization options"
  • From: Cole Robinson
• Re: virt-install: "ERROR Host does not support any virtualization options"
  • From: Michal Privoznik
• Re: virt-install: "ERROR Host does not support any virtualization options"
  • From: Cole Robinson
• Re: Creating network bridge without IP address
  • From: Nicolas Sebrecht
• Re: virt-install: "ERROR Host does not support any virtualization options"
  • From: Felix Blanke
• Re: virt-install: "ERROR Host does not support any virtualization options"
  • From: Michal Privoznik
• Re: serial console with virt-install
  • From: Felix Blanke
• Re: serial console with virt-install
  • From: Osier Yang
• Creating network bridge without IP address
  • From: Zoltan Lippai
• Re: virt-install: "ERROR Host does not support any virtualization options"
  • From: Felix Blanke
• Re: virt-install: "ERROR Host does not support any virtualization options"
  • From: Cole Robinson
• serial console with virt-install
  • From: Felix Blanke
• Re: trouble compile libvirt on slackware 13.37
  • From: Umberto Carrara
• Re: qcow2 performance
  • From: Stefan G. Weichinger
• virsh & vmxnet3 (VMware) VM
  • From: Florent Paillot
• Re: virt-install: "ERROR Host does not support any virtualization options"
  • From: Felix Blanke
• Re: virt-install: "ERROR Host does not support any virtualization options"
  • From: Marko Weber
• Re: virt-install: "ERROR Host does not support any virtualization options"
  • From: Felix Blanke
• Re: virt-install: "ERROR Host does not support any virtualization options"
  • From: Marko Weber
• Re: virt-install: "ERROR Host does not support any virtualization options"
  • From: Felix Blanke
• Re: virt-install: "ERROR Host does not support any virtualization options"
  • From: Michal Privoznik
• Re: qcow2 performance
  • From: SAURAV LAHIRI
• Re: trouble compile libvirt on slackware 13.37
  • From: Eric Blake
• virt-install: "ERROR Host does not support any virtualization options"
  • From: Felix Blanke
• Re: qcow2 performance
  • From: Trey Dockendorf
• trouble compile libvirt on slackware 13.37
  • From: Umberto Carrara
• Re: qcow2 performance
  • From: Stefan G. Weichinger
• Re: qcow2 performance
  • From: Stefan G. Weichinger
• Re: qcow2 performance
  • From: Andreas Kurz
• Re: Network questions
  • From: Michal Privoznik
• Re: qcow2 performance
  • From: SAURAV LAHIRI
• qcow2 performance
  • From: Stefan G. Weichinger
• Performance issues with KVM
  • From: Jatin Kumar
• How to securely license guests?
  • From: David Knierim
• Deploying OVF on Different virtual platforms
  • From: Nikunj Badjatya
• Re: Can a VM tell what host it's on?
  • From: Brian K. White
• Re: Can a VM tell what host it's on?
  • From: Whit Blauvelt
• Re: Can a VM tell what host it's on?
  • From: Whit Blauvelt
• Re: Can a VM tell what host it's on?
  • From: Brian K. White
• Re: Can a VM tell what host it's on?
  • From: Paul Lussier
• Re: Can a VM tell what host it's on?
  • From: Brian K. White
• Re: Can a VM tell what host it's on?
  • From: Eric Blake
• Re: Can a VM tell what host it's on?
  • From: Brian K. White
• Re: Can a VM tell what host it's on?
  • From: Eric Blake
• Re: Can a VM tell what host it's on?
  • From: Bryan Kearney
• Can a VM tell what host it's on?
  • From: Whit Blauvelt
• I want to ask How can I get something like id, uuid, its dom0 in the domU ?
  • From: Ming Q
• Gigabit network card not fully operational using KVM/Ubuntu
  • From: Josir Cardoso Gomes
• libvirt 0.9.4-23 on CentOS 6.2 with xen support
  • From: Rudolf Ladyzhenskii
• Re: Libvirt migration issues (0.9.4 and 0.9.9)
  • From: Eric Blake
• Re: Libvirt migration issues (0.9.4 and 0.9.9)
  • From: Daniel Espling
• Re: Libvirt migration issues (0.9.4 and 0.9.9)
  • From: Daniel Espling
• Re: libvir: error : cannot getpwuid_r(107): Success
  • From: vipul borikar
• Re: libvir: error : cannot getpwuid_r(107): Success
  • From: Eric Blake
• Re: libvir: error : cannot getpwuid_r(107): Success
  • From: Eric Blake
• Libvirt migration issues (0.9.4 and 0.9.9)
  • From: Daniel Espling
• libvir: error : cannot getpwuid_r(107): Success
  • From: vipul borikar
• Re: How to change libvirt / cgroup interaction?
  • From: Eric Blake
• Re: How to change libvirt / cgroup interaction?
  • From: Kanabuchi
• Re: Preventing 'virsh start' while doing backup?
  • From: Eric Blake
• Preventing 'virsh start' while doing backup?
  • From: Ken Coar
• Re: how to change existing domain xml?
  • From: p-man314
• How to change libvirt / cgroup interaction?
  • From: Samuel Hassine
• Re: ANNOUNCE: oz 0.8.0 release
  • From: Chris Lalancette
• Re: how to change existing domain xml?
  • From: Eric Blake
• Re: how to change existing domain xml?
  • From: Matthias Bolte
• how to change existing domain xml?
  • From: p-man314
• Re: [Problem] C# virDomainShutdown
  • From: Matthias Bolte
• [Problem] C# virDomainShutdown
  • From: Danny Fonk
• Question about libvirt / LXC
  • From: Samuel Hassine
• Re: [Users] oVirt setup issues
  • From: Yaniv Kaul
• gPXE fails automatically, succeeds with manual autoboot
  • From: Paul Lussier
• Re: oVirt setup issues
  • From: Dave Allan
• Re: libvirt 0.9.9: could not open /dev/net/tun: Operation not permitted
  • From: Dave Allan
• Re: span port from cisco switch to host to guest using kvm
  • From: David Knierim
• oVirt setup issues
  • From: Christian Parpart
• Re: libvirt 0.9.9: could not open /dev/net/tun: Operation not permitted
  • From: Fischer, Anna
• libvirt 0.9.9: could not open /dev/net/tun: Operation not permitted
  • From: Fischer, Anna
• Kickstart file doesn't work
  • From: Sarath P R
• unable to get libvirt work with libxenlight
  • From: 杨镭
• Re: libvirt with sasl shadow backend
  • From: Robyn Bachofer
• Re: libvirt with sasl shadow backend
  • From: Dave Allan
• Re: libvirt with sasl shadow backend
  • From: Robyn Bachofer
• Re: How to use "virDomainMemoryStats"? I got 0 result.
  • From: Eric Blake
• Should Windows NT guest use all of a CPU?
  • From: Richard Walker
• libvirt with sasl shadow backend
  • From: Robyn Bachofer
• possible to disable but not remove hardware?
  • From: David Mansfield
• Re: Cloud Init
  • From: Nicolas Sebrecht
• Re: virt-manager 0.9.0-r2 gentoo, no starting
  • From: Marko Weber
• Re: virt-manager 0.9.0-r2 gentoo, no starting
  • From: Christian Parpart
• Re: Cloud Init
  • From: Nicolas Sebrecht
• Re: virt-manager 0.9.0-r2 gentoo, no starting
  • From: Nicolas Sebrecht
• Cloud Init
  • From: Sarath P R
• virt-manager 0.9.0-r2 gentoo, no starting
  • From: Marko Weber
• How to use "virDomainMemoryStats"? I got 0 result.
  • From: mao weijie
• Re: Libvirt-LXC bug/error
  • From: Daniel P. Berrange
• Re: web frontend for managing libvirt servers
  • From: Marko Weber
• Re: web frontend for managing libvirt servers
  • From: Christian Parpart
• Re: web frontend for managing libvirt servers
  • From: Daniel P. Berrange
• Re: web frontend for managing libvirt servers
  • From: Dave Allan
• Re: (no subject)
  • From: Whit Blauvelt
• Re: (no subject)
  • From: Marko Weber
• Re: Libvirt-LXC bug/error
  • From: Samuel Hassine, Another Service
• sorry, choosed wrong recipient....
  • From: Marko Weber
• web frontend for managing libvirt servers
  • From: Christian Parpart
• Re: [SPAM] Re: libvirt 0.9.0 on gentoo linux, problem network
  • From: Marko Weber
• Re: [SPAM] Re: libvirt 0.9.0 on gentoo linux, problem network
  • From: Marko Weber
• Re: libvirt 0.9.0 on gentoo linux, problem network
  • From: Michal Privoznik
• libvirt 0.9.0 on gentoo linux, problem network
  • From: Marko Weber
• Re: Clone VM
  • From: Cole Robinson
• Libvirt-LXC bug/error
  • From: Samuel Hassine, Another Service
• Re: Thread-safety issues with vbox driver ?
  • From: Matthias Bolte
• Re: virt-install Error
  • From: 杨镭
• Clone VM
  • From: Boris Tobotras
• Re: virt-install Error
  • From: kendennit
• Re: ANNOUNCE: oz 0.8.0 release
  • From: Chris Lalancette
• Re: ANNOUNCE: oz 0.8.0 release
  • From: Pádraig Brady
• Re: (no subject)
  • From: Eric Blake
• (no subject)
  • From: Алексей Беляев
• Re: Libvirt API for C/C++ : Monitoring Support
  • From: Eric Blake
• LXC with RHEL 6.1
  • From: John Paul Walters
• When IPv6 is disabled, libvirtd cannot start on boot
  • From: Lei Yang
• Re: virt-install Error
  • From: Lei Yang
• Re: virt-install Error
  • From: kendennit
• Re: virt-install Error
  • From: Nitin Nikam
• Re: virt-install Error
  • From: Lei Yang
• libvirt + qemu-system-arm
  • From: Алексей Беляев
• Re: virt-install Error
  • From: David M. Barlieb
• virt-install Error
  • From: Nitin Nikam
• Re: Unable to close open libvirt connections
  • From: Daniel P. Berrange
• Re: Unable to close open libvirt connections
  • From: Jatin Kumar
• Re: Unable to close open libvirt connections
  • From: Daniel P. Berrange
• Re: Unable to close open libvirt connections
  • From: Michal Privoznik
• Libvirt API for C/C++ : Monitoring Support
  • From: pratik . patel
• Haskell bindings for libvirt
  • From: Michael Litchard
• Unable to close open libvirt connections
  • From: Jatin Kumar
• ANNOUNCE: oz 0.8.0 release
  • From: Chris Lalancette
• Re: Looking for feedback
  • From: Zorg
• span port from cisco switch to host to guest using kvm
  • From: nemus
• Re: Looking for feedback
  • From: Dave Allan
• Re: Looking for feedback
  • From: Eric Blake
• Re: Communication with Hyper-V
  • From: Matthias Bolte
• Communication with Hyper-V
  • From: Vadim Gurevich
• Looking for feedback
  • From: Zorg
• Re: Host and VM performance using libvirt
  • From: Peter Phaal
• Host and VM performance using libvirt
  • From: Ananth
• libvirt-bin always hung
  • From: mao weijie
• Re: hooks not working on Ubuntu
  • From: Zoltan Lippai
• hooks not working on Ubuntu
  • From: Zoltan Lippai
• Re: Libvirtd slowness
  • From: Nathan March
• Re: Python bindings for libvirt
  • From: Daniel P. Berrange
• Python bindings for libvirt
  • From: Ananth
• Re: Issue with event registration
  • From: Tyrion Lannister
• Re: libvirt-java: generate Java code from rng schema
  • From: Sergey Sudakovich (ssudakov)
• Feasibility of iscsi storage pool
  • From: Dennis Jacobfeuerborn
• Issue with event registration
  • From: Tyrion Lannister
• libvirt-java: generate Java code from rng schema
  • From: Celsina Bignoli
• Re: [LIBVIRT] Xen issue.
  • From: Daniel P. Berrange
• Re: [LIBVIRT] Xen issue.
  • From: Matthias Bolte
• [LIBVIRT] Xen issue.
  • From: Armand Leclercq
• Re: Hotplug/hotadd functionality of libvirt?
  • From: David Mansfield
• Re: Hotplug/hotadd functionality of libvirt?
  • From: Michal Privoznik
• Hotplug/hotadd functionality of libvirt?
  • From: Kees van Reeuwijk
• 答复: How to connect to a remote VM ESXi server with Python language?
  • From: ice
• Re: redirect ports from user network
  • From: Osier Yang
• redirect ports from user network
  • From: Алексей Беляев
• Re: How to connect to a remote VM ESXi server with Python language?
  • From: Matthias Bolte
• Re: cannot find -lportablexdr
  • From: Eric Blake
• cannot find -lportablexdr
  • From: Juliano Souza
• How to connect to a remote VM ESXi server with Python language?
  • From: ice
• Libvirt java from Windows
  • From: Sergey Sudakovich (ssudakov)
• Re: for a guest accessing host "full disk", how to prevent host vgscan
  • From: David Mansfield
• Re: [virt-tools-list] error creating NFS storage pool
  • From: Grant Siebrecht
• Re: [virt-tools-list] error creating NFS storage pool
  • From: Cole Robinson
• Re: for a guest accessing host "full disk", how to prevent host vgscan
  • From: David Mansfield
• Re: for a guest accessing host "full disk", how to prevent host vgscan
  • From: Daniel P. Berrange
• Re: for a guest accessing host "full disk", how to prevent host vgscan
  • From: David Mansfield
• Error when creating domain with virsh+qemu
  • From: Stefano Ghio
• Re: for a guest accessing host "full disk", how to prevent host vgscan
  • From: Daniel P. Berrange
• for a guest accessing host "full disk", how to prevent host vgscan
  • From: David Mansfield
• Issue with IPMI (and KVM) on RHEL 6
  • From: Jawahar Tadipatri
• Re: Libvirtd slowness
  • From: Nathan March
• Virt-Manager + IDE Controller
  • From: Paul K. Alabi
• Using libvirt networking properly.
  • From: Andrew Spiers
• network problems with some cloned vm
  • From: xuteng
• Re: Qemu restore error
  • From: Dennis Householder
• Re: Qemu restore error
  • From: Eric Blake
• Qemu restore error
  • From: Dennis Householder
• Re: Adding a public static IP address to the guest
  • From: libvirt
• Re: acceptable SASL mechanisms/can libvirt authenticate against PAM
  • From: Dave Allan
• Re: acceptable SASL mechanisms/can libvirt authenticate against PAM
  • From: Daniel P. Berrange
• Re: acceptable SASL mechanisms/can libvirt authenticate against PAM
  • From: Dave Allan
• Temporary use of disk space when deploying KVM with qcow2 ?
  • From: Jorge Somavilla
• Adding a public static IP address to the guest
  • From: Sudheer Satyanarayana
• Re: acceptable SASL mechanisms/can libvirt authenticate against PAM
  • From: Josip Deanovic
• Re: acceptable SASL mechanisms/can libvirt authenticate against PAM
  • From: Josip Deanovic
• Re: Why does libvirt use XML firewall rules?
  • From: Daniel P. Berrange
• Re: acceptable SASL mechanisms/can libvirt authenticate against PAM
  • From: Daniel P. Berrange
• Re: Why does libvirt use XML firewall rules?
  • From: Hansa
• Re: acceptable SASL mechanisms/can libvirt authenticate against PAM
  • From: Josip Deanovic
• acceptable SASL mechanisms/can libvirt authenticate against PAM
  • From: Dave Allan
• Re: Libvirt filterref magic
  • From: Daniel P. Berrange
• Libvirt filterref magic
  • From: zz elle
• Re: libvirt0.9.7.tar.gz installation cannot start libvirtd?
  • From: Eric Blake
• Re: Libvirtd slowness
  • From: Nathan March
• Re: Libvirtd slowness
  • From: Nathan March
• Thread-safety issues with vbox driver ?
  • From: Jean-Baptiste Rouault
• Temporary use of disk space when deploying KVM with qcow2?
  • From: Jorge
• Re: Libvirtd slowness
  • From: Michal Privoznik
• libvirt0.9.7.tar.gz installation cannot start libvirtd?
  • From: 张光鹏
• Re: Libvirtd slowness
  • From: Nathan March
• Re: Libvirtd slowness
  • From: Nathan March
• Why does libvirt use XML firewall rules?
  • From: Hansa
• Issues with nwfilter rules
  • From: Kevin
• Re: http://libvirt.org/archdomain.html - page is empty
  • From: Eric Blake
• http://libvirt.org/archdomain.html - page is empty
  • From: pitnvrsk
• FYI: SpecVirt results using libvirt + KVM
  • From: Daniel P. Berrange
• Re: lxc capabilities
  • From: Daniel P. Berrange
• Re: read-only rootfs for lxc containers
  • From: Daniel P. Berrange
• Re: read-only rootfs for lxc containers
  • From: Chris Haumesser
• Re: read-only rootfs for lxc containers
  • From: Daniel P. Berrange
• Re: tmpfs mounts for lxc container
  • From: Daniel P. Berrange
• Re: lxc capabilities
  • From: Daniel P. Berrange
• read-only rootfs for lxc containers
  • From: Chris Haumesser
• tmpfs mounts for lxc container
  • From: Chris Haumesser
• Re: lxc capabilities
  • From: Chris Haumesser
• Re: lxc errors on 0.9.7
  • From: Daniel P. Berrange
• Re: lxc capabilities
  • From: Chris Haumesser
• Re: lxc errors on 0.9.7
  • From: Chris Haumesser
• Re: Custom firewall rules
  • From: Hansa
• Re: lxc errors on 0.9.7
  • From: Daniel P. Berrange
• Re: lxc capabilities
  • From: Daniel P. Berrange
• Re: lxc errors on 0.9.7
  • From: Eric Blake
• Re: lxc errors on 0.9.7
  • From: Chris Haumesser
• lxc errors on 0.9.7
  • From: Chris Haumesser
• lxc capabilities
  • From: Chris Haumesser
• Custom firewall rules
  • From: Hansa
• Re: libvirt and LXC
  • From: Daniel P. Berrange
• virt-manager / libvirtd connection options
  • From: Shaun Glass
• libvirt and LXC
  • From: Ivars Strazdiņš
• Re: Can I configure cores instead of CPU's
  • From: Todd And Margo Chester
• Re: Can I configure cores instead of CPU's
  • From: Todd And Margo Chester
• Re: Can I configure cores instead of CPU's
  • From: Todd And Margo Chester
• Re: Can I configure cores instead of CPU's
  • From: Todd And Margo Chester
• Libvirtd slowness
  • From: Nathan March
• How to use virt-install and http to install openbsd VM in KVM?
  • From: Li, David
• need help with sanlock plugin
  • From: Upendra Moturi
• permission denied when setting up VMchannel with libvirt
  • From: 罗卫梁
• Fwd: virt-manager / ssh (publickey)
  • From: Shaun Glass
• Re: virt-manager / ssh (publickey)
  • From: Trey Dockendorf
• virt-manager / ssh (publickey)
  • From: Shaun Glass
• Re: VM Manager for Android
  • From: Eric Blake
• VM Manager for Android
  • From: KaBuTe
• Failed to start a "virtual machine " service on RHCS in CentOS 6
  • From: xuteng
• Re: Difference between "Max Memory" and "Used Memory"
  • From: Eric Blake
• Difference between "Max Memory" and "Used Memory"
  • From: Jérôme Gallard
• Re: libvirt and linux-vserver
  • From: Nicolas Sebrecht
• Re: libvirt and linux-vserver
  • From: Daniel P. Berrange
• Re: libvirt and linux-vserver
  • From: Nicolas Sebrecht
• Re: libvirt and linux-vserver
  • From: Daniel P. Berrange
• libvirt and linux-vserver
  • From: Christian Parpart
• Re: Ruby libvirt gem: state reasons
  • From: Ken Coar
• Re: Ruby libvirt gem: state reasons
  • From: Mohammed Naser
• Ruby libvirt gem: state reasons
  • From: Ken Coar
• Defined VM goes missing in multi-threaded environment.
  • From: Sharad Mishra
• [libvirt-user] questions about disk driver virtio and charmonitor
  • From: Chang Liu
• Re: libvirt uninstall @ install problem??
  • From: Osier Yang
• libvirt uninstall @ install problem??
  • From: 张光鹏
• Re: consider bios upgrade...
  • From: Nicolas Sebrecht
• Network questions
  • From: paul.worner
• Re: Checking if the VM has been created
  • From: Eric Blake
• Re: Checking if the VM has been created
  • From: Michal Privoznik
• Re: Checking if the VM has been created
  • From: William A. Mahaffey III
• Re: Speaking of DNSmasq ....
  • From: William A. Mahaffey III
• Re: Speaking of DNSmasq ....
  • From: Steve Gordon
• Re: Checking if the VM has been created
  • From: Till Mossakowski
• Speaking of DNSmasq ....
  • From: William A. Mahaffey III
• Re: Checking if the VM has been created
  • From: William A. Mahaffey III
• Checking if the VM has been created
  • From: Preethi Ramesh
• consider bios upgrade...
  • From: jurgen . depicker
• virsh Attach-disk function
  • From: Jatin Kumar
• Re: listDomains() not working on Xen
  • From: Preethi Ramesh
• Re: listDomains() not working on Xen
  • From: Matthias Bolte
• listDomains() not working on Xen
  • From: PREETHI RAMESH
• Re: kvm/libvirt can't use vmdk files? qemu: 'vmdk' invalid format
  • From: Daniel P. Berrange
• kvm/libvirt can't use vmdk files? qemu: 'vmdk' invalid format
  • From: Frank Hauptle
• Re: [libvirt-users] libvirt0.8.7.tar.gz installation failure
  • From: 张光鹏
• Re: libvirt0.8.7.tar.gz installation failure
  • From: Osier Yang
• libvirt0.8.7.tar.gz installation failure
  • From: 张光鹏
• Re: CPU and RAM utilization
  • From: Osier Yang
• CPU and RAM utilization
  • From: Jatin Kumar
• Re: Problem with listDomains() in Xen
  • From: PREETHI RAMESH
• Re: Problem with listDomains() in Xen
  • From: Eric Blake
• Re: diificulty installing or building libvert
  • From: Eric Blake
• diificulty installing or building libvert
  • From: Jeff Gaer
• Problem with listDomains() in Xen
  • From: PREETHI RAMESH
• How to create virtual machine via virsh shell?
  • From: 张光鹏
• How to create virtual machine via virsh shell?
  • From: 张光鹏
• libvirt:create volume error
  • From: 张光鹏
• Can't assign the 2nd MAC address to the VM
  • From: zhouyb13
• Problem with libvirt daemon
  • From: Wouter - Iamotor
• Re: libvirt, OSX and VirtualBox - how?
  • From: Brian Candler
• consider bios upgrade...
  • From: jurgen . depicker
• libvirtError: internal error cannot find PCI address for balloon virtio
  • From: Wouter
• Re: virt-manager: create lxc app container hangs
  • From: Osier Yang
• Re: libvirt, OSX and VirtualBox - how?
  • From: Brian Candler
• Re: libvirt, OSX and VirtualBox - how?
  • From: Matthias Bolte
• Re: libvirt, OSX and VirtualBox - how?
  • From: Brian Candler
• Re: libvirt, OSX and VirtualBox - how?
  • From: Brian Candler
• Re: Finding out if Xen or KVM is used
  • From: Matthias Bolte
• Re: libvirt, OSX and VirtualBox - how?
  • From: Matthias Bolte
• libvirt, OSX and VirtualBox - how?
  • From: Brian Candler
• Libvirt exiting and respawning
  • From: Stephen Eilert
• Re: virt-manager: create lxc app container hangs
  • From: sean darcy
• Finding out if Xen or KVM is used
  • From: PREETHI RAMESH
• virt-manager: create lxc app container hangs
  • From: sean darcy
• Re: no connection driver available for openvz:///system
  • From: 张立洪
• Re: Event&Callback in QEMU
  • From: Daniel P. Berrange
• Event&Callback in QEMU
  • From: huachao yao
• Cannot start VM after restart libvirt daemon
  • From: Jean-Luc Derrien
• general protection errors
  • From: Alex
• Re: auto-set /cgroup/*/libvirt/qemu/<vm name>/ directory permissions on creation
  • From: Daniel P. Berrange
• Re: CentOS5: libvirtd filling up /var/lib/libvirt/qemu/save
  • From: Jiri Denemark
• auto-set /cgroup/*/libvirt/qemu/<vm name>/ directory permissions on creation
  • From: Ben Clay
• CentOS5: libvirtd filling up /var/lib/libvirt/qemu/save
  • From: Ben Clay
• Network filesystem pool mount options
  • From: Joe Auty
• Re: Error on the site
  • From: Eric Blake
• Error on the site
  • From: Alexander Biryukov
• Re: Hard limit for the cpu usage of a VM
  • From: Wen Congyang
• Re: [ruby-libvirt] who's using it
  • From: Till Mossakowski
• Re: [ruby-libvirt] who's using it
  • From: Mohammed Naser
• [ruby-libvirt] who's using it
  • From: Christian Parpart
• Re: VM with transient disk
  • From: Eric Blake
• Re: VM with transient disk
  • From: Till Mossakowski
• Re: VM with transient disk
  • From: Osier Yang
• VM with transient disk
  • From: Till Mossakowski
• Re: How to collect the VM bandwidth usage utilization
  • From: vmnode guy
• Re: live migration error without shared storage
  • From: Eric Blake
• libvirt-php - API libvirt_domain_suspend() problem, doesn't work
  • From: vmnode guy
• Re: live migration error without shared storage
  • From: Luengffy XUE
• Re: live migration error without shared storage
  • From: Eric Blake
• live migration error without shared storage
  • From: Luengffy XUE
• Live migration with 2 nodes and no SAN
  • From: Trey Dockendorf
• Re: delete lvm problem: exited with non-zero status 5 and signal 0
  • From: Eric Blake
• Re: Need help to compile libvirt-php
  • From: Mohammed Naser
• delete lvm problem: exited with non-zero status 5 and signal 0
  • From: lingjiao.lc
• Re: live migration without shared storage problems.
  • From: Osier Yang
• Re: live migration without shared storage problems.
  • From: Luengffy XUE
• Re: live migration without shared storage problems.
  • From: Osier Yang
• Re: live migration without shared storage problems.
  • From: Luengffy XUE
• Re: How to collect the VM bandwidth usage utilization
  • From: Peter Phaal
• Re: Need help to compile libvirt-php
  • From: vmnode guy
• Re: Start of libvirtd fails with error "undefined symbol: __virAlloc"
  • From: Eric Blake
• Re: how to setup libvirt with java bindings for use
  • From: Dan Hirsch
• Re: virsh start VM failed
  • From: vmnode guy
• Re: virsh start VM failed
  • From: Eric Blake
• Re: live migration without shared storage problems.
  • From: vmnode guy
• Re: how to setup libvirt with java bindings for use
  • From: Bryan Kearney
• live migration without shared storage problems.
  • From: Luengffy XUE
• Re: virsh start VM failed
  • From: Eric Blake
• Re: virsh start VM failed
  • From: vmnode guy
• Re: Need help to compile libvirt-php
  • From: vmnode guy
• how to setup libvirt with java bindings for use
  • From: Dan Hirsch
• virsh start VM failed
  • From: 邱敏鈴
• Re: Need help to compile libvirt-php
  • From: חץ בן חמו
• Need help to compile libvirt-php
  • From: vmnode guy
• 回复: Re: [libvirt] How to use "virsh migrat" with p2p option?
  • From: Guangya Liu
• Re: [libvirt] How to use "virsh migrat" with p2p option?
  • From: Eric Blake
• Re: Hard limit for the cpu usage of a VM
  • From: sethuraman subbiah
• Re: Hard limit for the cpu usage of a VM
  • From: Eric Blake
• Re: Hard limit for the cpu usage of a VM
  • From: sethuraman subbiah
• Re: Hard limit for the cpu usage of a VM
  • From: Eric Blake
• Re: Hard limit for the cpu usage of a VM
  • From: sethuraman subbiah
• Re: Hard limit for the cpu usage of a VM
  • From: Eric Blake
• Re: Hard limit for the cpu usage of a VM
  • From: sethuraman subbiah
• Re: Hard limit for the cpu usage of a VM
  • From: Eric Blake
• Re: Fwd: Re: Unable to acquire lock
  • From: Eric Blake
• Hard limit for the cpu usage of a VM
  • From: sethuraman subbiah
• Fwd: Re: Unable to acquire lock
  • From: Trey Dockendorf
• Re: renaming a domain
  • From: Eric Blake
• renaming a domain
  • From: Roberto Attias (rattias)
• Start of libvirtd fails with error "undefined symbol: __virAlloc"
  • From: Langenbach, Steffen
• Re: Unable to acquire lock
  • From: Dave Allan
• Running LXC instance as a non-root user
  • From: Dong-In David Kang
• Re: VirtualBox 4.1 support
  • From: Stefano Facchini
• Re: How to use "virsh migrat" with p2p option?
  • From: Guangya Liu
• How to use "virsh migrat" with p2p option?
  • From: Guangya Liu
• How to collect the VM bandwidth usage utilization
  • From: vmnode guy
• Unable to acquire lock
  • From: Jatin Kumar
• Re: VirtualBox 4.1 support
  • From: Osier Yang
• Re: high-privileges
  • From: Osier Yang
• Re: virsh modified option... alternative..
  • From: Osier Yang
• Re: high-privileges
  • From: Andreas Kurz
• Re: VirtualBox 4.1 support
  • From: Stefano Facchini
• Re: VirtualBox 4.1 support
  • From: Matthias Bolte
• Re: high-privileges
  • From: Face
• VirtualBox 4.1 support
  • From: Stefano Facchini
• Re: high-privileges
  • From: Andreas Kurz
• Re: virt-install with set vnc password
  • From: Mohammed Naser
• Re: virt-install with set vnc password
  • From: vmnode guy
• Re: virt-install with set vnc password
  • From: Mohammed Naser
• Re: virt-install with set vnc password
  • From: vmnode guy
• Re: virt-install with set vnc password
  • From: Mohammed Naser
• virt-install with set vnc password
  • From: vmnode guy
• high-privileges
  • From: Face
• virsh modified option... alternative..
  • From: vmnode guy
• Re: Libvirt Live Migrat error
  • From: Osier Yang
• Libvirt Live Migrat error
  • From: Luengffy XUE
• Re: Identifying proper CPU type
  • From: Alex
• Re: Identifying proper CPU type
  • From: Mihamina Rakotomandimby
• Identifying proper CPU type
  • From: Alex
• general protection and other errors
  • From: Alex
• Re: no connection driver available for openvz:///system
  • From: 张立洪
• Re: Virtio Balloon- Can not see the results
  • From: d hee
• Re: no connection driver available for openvz:///system
  • From: 张立洪
• Re: Virtio Balloon- Can not see the results
  • From: Eric Blake
• Help with running virt-top from Java file
  • From: PREETHI RAMESH
• libvirt ESXI driver's capabilities
  • From: חץ בן חמו
• Re: Virtio Balloon- Can not see the results
  • From: d hee
• virt-install.
  • From: Chuck LaVerde
• Re: no connection driver available for openvz:///system
  • From: Eric Blake
• Re: no connection driver available for openvz:///system
  • From: 张立洪
• Re: no connection driver available for openvz:///system
  • From: Trey Dockendorf
• Re: XML file format for snapshot-create
  • From: Trey Dockendorf
• Re: XML file format for snapshot-create
  • From: jurgen . depicker
• Virtio Balloon- Can not see the results
  • From: d hee
• Re: XML file format for snapshot-create
  • From: Trey Dockendorf
• Re: BIOS Delay
  • From: xuteng
• Re: XML file format for snapshot-create
  • From: Eric Blake
• XML file format for snapshot-create
  • From: Trey Dockendorf
• Re: no connection driver available for openvz:///system
  • From: Trey Dockendorf
• Re: Live Migration using Libvirt migrate()
  • From: Eric Blake
• Re: BIOS Delay
  • From: Eric Blake
• Re: no connection driver available for openvz:///system
  • From: 张立洪
• Re: Performance tuning questions for mail server
  • From: Eric Blake
• Re: no connection driver available for openvz:///system
  • From: Matthias Bolte
• Re: Performance tuning questions for mail server
  • From: Nicolas Sebrecht
• Re: Performance tuning questions for mail server
  • From: Alex
• Re: Performance tuning questions for mail server
  • From: Emmanuel Noobadmin
• Re: Performance tuning questions for mail server
  • From: Eric Blake
• Re: Performance tuning questions for mail server
  • From: Robin Lee Powell
• Re: Performance tuning questions for mail server
  • From: Alex
• Re: no connection driver available for openvz:///system
  • From: Eric Blake
• no connection driver available for openvz:///system
  • From: 张立洪
• Live Migration using Libvirt migrate()
  • From: PREETHI RAMESH
• BIOS Delay
  • From: xuteng
• Re: Performance tuning questions for mail server
  • From: Emmanuel Noobadmin
• Re: Performance tuning questions for mail server
  • From: Robin Lee Powell
• Re: Performance tuning questions for mail server
  • From: Alex
• Re: Libvirt newbie, need help with doubts
  • From: Eric Blake
• Re: Libvirt newbie, need help with doubts
  • From: Eric Blake
• Re: Reg: shutdown/restart from within the container(system LXC)
  • From: Alphonse Hansel Anthony
• Libvirt newbie, need help with doubts
  • From: PREETHI RAMESH
• Re: Performance tuning questions for mail server
  • From: Emmanuel Noobadmin
• Re: Performance tuning questions for mail server
  • From: Emmanuel Noobadmin
• Re: Reg: shutdown/restart from within the container(system LXC)
  • From: Daniel P. Berrange
• Re: Libvirt for custom VM
  • From: Eric Blake
• Re: Performance tuning questions for mail server
  • From: Alex
• Reg: shutdown/restart from within the container(system LXC)
  • From: Alphonse Hansel Anthony
• virsh list not working with xen 4
  • From: Rogério Vinhal Nunes
• Re: Performance tuning questions for mail server
  • From: Alex
• Re: Performance tuning questions for mail server
  • From: Emmanuel Noobadmin
• Need help debugging virtio net issue
  • From: Darren Dao
• Re: Performance tuning questions for mail server
  • From: Alex
• Re: Performance tuning questions for mail server
  • From: Robin Lee Powell
• Performance tuning questions for mail server
  • From: Alex
• Re: libvir: Remote error : cannot recv data: : Connection reset by peer
  • From: Dave Allan
• Re: libvir: Remote error : cannot recv data: : Connection reset by peer
  • From: Sharad Mishra
• Libvirt for custom VM
  • From: ankur deshwal
• Re: Usage serial device
  • From: Daniel P. Berrange
• libvir: Remote error : cannot recv data: : Connection reset by peer
  • From: PREETHI RAMESH
• Usage serial device
  • From: David Goulet
• Re: Second VM cannot get dhcp ip in NAT mode
  • From: Magicloud Magiclouds
• Re: Second VM cannot get dhcp ip in NAT mode
  • From: Laine Stump
• qemu+ssh fails with "packet received from server too large"
  • From: Trey Dockendorf
• Difficutlies with lp port
  • From: Anselmo
• win7 instance just disappears
  • From: Alex
• Re: Second VM cannot get dhcp ip in NAT mode
  • From: Magicloud Magiclouds
• Second VM cannot get dhcp ip in NAT mode
  • From: Magicloud Magiclouds
• ANNOUNCE: Perl binding release Sys-Virt version 0.9.5
  • From: Daniel P. Berrange
• Re: virsh cannot list broken guest.
  • From: Magicloud Magiclouds
• Re: virsh cannot list broken guest.
  • From: Magicloud Magiclouds
• virsh cannot list broken guest.
  • From: Magicloud Magiclouds
• Re: Snapshot Error
  • From: Eric Blake
• Re: how to convert from xen .cfg files to libvirt xml?
  • From: Mauro
• Re: how to convert from xen .cfg files to libvirt xml?
  • From: Eric Blake
• Re: how to convert from xen .cfg files to libvirt xml?
  • From: Eric Blake
• Re: how to convert from xen .cfg files to libvirt xml?
  • From: Mauro
• Re: how to convert from xen .cfg files to libvirt xml?
  • From: Eric Blake
• Re: how to convert from xen .cfg files to libvirt xml?
  • From: Mauro
• Re: how to convert from xen .cfg files to libvirt xml?
  • From: Mauro
• Re: Snapshot Error
  • From: Emmanuel Noobadmin
• Snapshot Error
  • From: huachao yao
• Re: virsh edit problems
  • From: Robin Lee Powell
• Re: virsh edit problems
  • From: Eric Blake
• virsh edit problems
  • From: Robin Lee Powell
• how to convert from xen .cfg files to libvirt xml?
  • From: Mauro
• Re: changue bridge name, libvirt refuses to take new name
  • From: Eric Blake
• changue bridge name, libvirt refuses to take new name
  • From: Sergio A. Kessler
• Re: new guest with same name as undefined one
  • From: Sergio A. Kessler
• Re: new guest with same name as undefined one
  • From: Eric Blake
• Re: new guest with same name as undefined one
  • From: David Cohen
• Re: new guest with same name as undefined one
  • From: Eric Blake
• new guest with same name as undefined one
  • From: Sergio A. Kessler
• Re: [virt-tools-list] ANNOUNCE: oz 0.7.0 release
  • From: Richard W.M. Jones
• FW: virDomainDefineXml Issue
  • From: Kiran Javaid
• Re: The Format Of URI when Migrating
  • From: Daniel P. Berrange
• The Format Of URI when Migrating
  • From: huachao yao
• Re: Hot cloning & P2V
  • From: Eric Blake
• Hot cloning & P2V
  • From: smain kahlouch
• Re: random "monitor socket did not show up"
  • From: Gian Uberto Lauri
• Re: random "monitor socket did not show up"
  • From: Osier Yang
• Re: virsh console
  • From: Dave Allan
• virsh console
  • From: Jeff
• random "monitor socket did not show up"
  • From: Gian Uberto Lauri
• Re: [Libguestfs] Problem with allocation of big files
  • From: Richard W.M. Jones
• Problem with allocation of big files
  • From: Nikita A Menkovich
• Remote connect using virsh qemu+ssh hangs / PolicyKit issue
  • From: Trey Dockendorf
• Re: libvirt does not recognize all devices in iscsi and mpath pools in a predictable manner
  • From: Guido Winkelmann
• ANNOUNCE: oz 0.7.0 release
  • From: Chris Lalancette
• Re: virDomainDefineXml Issue
  • From: Kiran Javaid
• Re: Config Errro when Creating a virtual device attachment to backend
  • From: Osier Yang
• Config Errro when Creating a virtual device attachment to backend
  • From: huachao yao
• Re: Libvirt daemon usage question
  • From: Trey Dockendorf
• Re: Libvirt daemon usage question
  • From: Eric Blake
• Re: Libvirt daemon usage question
  • From: Eric Blake
• Libvirt daemon usage question
  • From: Trey Dockendorf
• Re: How to install libvirt 0.9.4 RPM on Fedora 14?
  • From: Guido Winkelmann
• using virsh (or something) to convert from KVM domain XML to vmx...
  • From: Frank Hauptle
• Re: How to install libvirt 0.9.4 RPM on Fedora 14?
  • From: Soeren Grunewald
• Re: cpu time totals
  • From: Eric Blake
• cpu time totals
  • From: Igor Serebryany
• Re: How to install libvirt 0.9.4 RPM on Fedora 14?
  • From: Laine Stump
• Re: libvirt does not recognize all devices in iscsi and mpath pools in a predictable manner
  • From: Daniel P. Berrange
• libvirt does not recognize all devices in iscsi and mpath pools in a predictable manner
  • From: Guido Winkelmann
• Re: Reg: Difference between chroot & pivot_root
  • From: Daniel P. Berrange
• Re: Reg: Difference between chroot & pivot_root
  • From: Guido Winkelmann
• How to install libvirt 0.9.4 RPM on Fedora 14?
  • From: Guido Winkelmann
• Re: Reg: Difference between chroot & pivot_root
  • From: Alphonse Hansel Anthony
• Reg: VETH Device pair creation using iproute2.
  • From: Alphonse Hansel Anthony
• Re: Fwd: Re: [libvirt] how did libvirt manage Virtual Network?
  • From: Wayne Xia
• Updating librvirt on the STD Distros
  • From: KB
• Re: CPU Model detection with virsh capabilities
  • From: Jiri Denemark
• Re: CPU Model detection with virsh capabilities
  • From: Olivier BONHOMME
• Re: CPU Model detection with virsh capabilities
  • From: Jiri Denemark
• Re: Reg: Difference between chroot & pivot_root
  • From: Daniel P. Berrange