Libvirt Users

• Thread Index

• Re: Fwd: Re: [libvirt] how did libvirt manage Virtual Network?
  • From: Wayne Xia
• Updating librvirt on the STD Distros
  • From: KB
• Re: CPU Model detection with virsh capabilities
  • From: Jiri Denemark
• Re: CPU Model detection with virsh capabilities
  • From: Olivier BONHOMME
• Re: CPU Model detection with virsh capabilities
  • From: Jiri Denemark
• Re: Reg: Difference between chroot & pivot_root
  • From: Daniel P. Berrange
• Re: virDomainDefineXml Issue
  • From: Jiri Denemark
• Re: [libvirt] how did libvirt manage Virtual Network?
  • From: Laine Stump
• Re: Graphical framebuffers confuse, XML format about spice
  • From: Laine Stump
• virDomainDefineXml Issue
  • From: Kiran Javaid
• Re: IPs of VMs on KVM
  • From: Mihamina Rakotomandimby
• IPs of VMs on KVM
  • From: PREETHI RAMESH
• Re: CPU Model detection with virsh capabilities
  • From: Jiri Denemark
• Re: Graphical framebuffers confuse, XML format about spice
  • From: Laine Stump
• Re: Graphical framebuffers confuse, XML format about spice
  • From: Laine Stump
• Re: Graphical framebuffers confuse, XML format about spice
  • From: huachao yao
• Graphical framebuffers confuse, XML format about spice
  • From: huachao yao
• Libvirt xen snapshot support?
  • From: Joshua Harlow
• Libvirt vm migration with xen 4.1.1
  • From: Rogério Vinhal Nunes
• Re: How to dedicate a NIC for VM traffic without assigning it an IP
  • From: RaSca
• How to dedicate a NIC for VM traffic without assigning it an IP
  • From: Albert Chin
• Libvirt migration with Xen 4.1.1
  • From: Rogério Vinhal Nunes
• Reg: Difference between chroot & pivot_root
  • From: Alphonse Hansel Anthony
• vlan and libvirt
  • From: Vidon Guillaume
• Re: RAID1 over IP?
  • From: Jean Michault
• Re: CPU Model detection with virsh capabilities
  • From: Olivier BONHOMME
• Re: Char dev error
  • From: Joseph Harnish
• Re: Char dev error
  • From: Jatin Kumar
• Re: Char dev error
  • From: Joseph Harnish
• Char dev error
  • From: Jatin Kumar
• ssh connection problem
  • From: zahra tavakoli
• Re: New with Libvirt and having problems.
  • From: Kevins Thoughts
• conflict disk error
  • From: Paras pradhan
• Re: New with Libvirt and having problems.
  • From: Eric Blake
• Re: New with Libvirt and having problems.
  • From: Kevins Thoughts
• Fwd: Re: New with Libvirt and having problems.
  • From: Kevins Thoughts
• Re: VMs do not start randomically during host boot
  • From: Osier Yang
• Re: hello, I 've deployed libvirt, and it is OK to use kvm.But when I use virtualbox, I can not attach a device to a domain
  • From: Osier Yang
• Re: Help!
  • From: Osier Yang
• New with Libvirt and having problems.
  • From: Kevins Thoughts
• Xenapi - Domain Console opening & System info
  • From: sharmila radha krishnan
• Reg: Workaround to use pivot_root while using "rootfs" for "/" ?
  • From: Alphonse Hansel Anthony
• hello, I 've deployed libvirt, and it is OK to use kvm.But when I use virtualbox, I can not attach a device to a domain
  • From: bin liu
• Reg: Workaround to use pivot_root while using "rootfs" for "/" ?
  • From: Alphonse Hansel Anthony
• libvirt sheepdog support (Was: (no subject))
  • From: Frank Matthieß
• Help!
  • From: huachao yao
• VMs do not start randomically during host boot
  • From: Josir Cardoso Gomes
• Re: (no subject)
  • From: Daniel P. Berrange
• (no subject)
  • From: lingjiao.lc
• Re: libvirt ruby binding with vmware
  • From: Chris Lalancette
• pool-refresh on iSCSI pools does not actually rescan the bus
  • From: Guido Winkelmann
• Re: Strange libvirt exit status 1 (LXC containers)
  • From: Stephen Eilert
• Re: Strange libvirt exit status 1 (LXC containers)
  • From: Stephen Eilert
• Strange libvirt exit status 1 (LXC containers)
  • From: Stephen Eilert
• Re: migration in parallel
  • From: Dave Allan
• Re: migration in parallel
  • From: Yih-Herng Chuang
• Re: migration in parallel
  • From: Dave Allan
• Re: libvirt ruby binding with vmware
  • From: Matthias Bolte
• libvirt ruby binding with vmware
  • From: Ohad Levy
• migration in parallel
  • From: Yih-Herng Chuang
• Re: Problem to migrate virtual machine between two hosts with same uuid
  • From: Umberto Carrara
• Re: pool assumed to have 512B sector
  • From: Daniel P. Berrange
• Re: Problem to migrate virtual machine between two hosts with same uuid
  • From: Daniel P. Berrange
• Re: Problem to migrate virtual machine between two hosts with same uuid
  • From: Eric Blake
• Re: Problem to migrate virtual machine between two hosts with same uuid
  • From: Daniel P. Berrange
• Problem to migrate virtual machine between two hosts with same uuid
  • From: info
• Re: pool assumed to have 512B sector
  • From: David Cohen
• Re: pool assumed to have 512B sector
  • From: Daniel P. Berrange
• pool assumed to have 512B sector
  • From: David Cohen
• ANNOUNCE: oz0.6.0 release
  • From: Chris Lalancette
• issue with virErrorInitialize
  • From: Sharad Mishra
• How to Connect a new CD via virt-manager
  • From: Marc Haber
• Invitation to connect on LinkedIn
  • From: Hao Pan
• Detaching LVM volume from Windows guest
  • From: mkey
• Detaching LVM volume from Windows guest
  • From: mkey
• build libvirt from source yourself and make sure to get the XenAPI driver enabled.
  • From: Lovocas Mou
• Re: Detecting the last user of a connection has closed.
  • From: Matthias Bolte
• Re: which vols added to storage pool during refresh?
  • From: Daniel P. Berrange
• Re: Migration hangs on Gentoo with KVM
  • From: Eric Blake
• Re: Migration hangs on Gentoo with KVM
  • From: Jonathan Stoppani
• segfault while unloading libvirt provider.
  • From: Sharad Mishra
• Re: which vols added to storage pool during refresh?
  • From: Gareth S Bestor
• Re: which vols added to storage pool during refresh?
  • From: Daniel P. Berrange
• which vols added to storage pool during refresh?
  • From: Gareth S Bestor
• A few more questions ....
  • From: William A. Mahaffey III
• Re: virt-install -> guest stops at installation end
  • From: Julien Garet
• Re: virt-install -> guest stops at installation end
  • From: William A. Mahaffey III
• virt-install -> guest stops at installation end
  • From: Julien Garet
• Detecting the last user of a connection has closed.
  • From: Andy Joslin
• Re: Question about terminology
  • From: Nicolas Sebrecht
• Re: does kvm support SATA driver?
  • From: Nicolas Sebrecht
• The saga continues ....
  • From: William A. Mahaffey III
• Re: Non-persistent disk
  • From: Eric Blake
• Non-persistent disk
  • From: Xianqing Yu
• How to send a break using "virsh console"??
  • From: David Knierim
• Question about terminology
  • From: Jeff
• does kvm support SATA driver?
  • From: lisiyang
• Ongoing VM saga ....
  • From: William A. Mahaffey III
• How to setup routed networking in CLI ....
  • From: William A. Mahaffey III
• Re: VNC ports
  • From: Jeff
• Re: VNC ports
  • From: Matthias Bolte
• Re: How do I disable auto-logout ....
  • From: William A. Mahaffey III
• Re: How do I disable auto-logout ....
  • From: Carlos Campderrós
• Re: VNC ports
  • From: Abhishek Gupta
• How do I disable auto-logout ....
  • From: William A. Mahaffey III
• VNC ports
  • From: Jeff
• Re: Problems setting up a VM ....
  • From: William A. Mahaffey III
• Re: virStoragePoolRefresh() returns before or after all new vols on path discovered?
  • From: Daniel P. Berrange
• Re: virInitialize dumps core intermittently.
  • From: Daniel P. Berrange
• Re: virInitialize dumps core intermittently.
  • From: Daniel Veillard
• virStoragePoolRefresh() returns before or after all new vols on path discovered?
  • From: Gareth S Bestor
• virInitialize dumps core intermittently.
  • From: Sharad Mishra
• Re: iscsi w/ libvirt
  • From: Stefan G. Weichinger
• Re: iscsi w/ libvirt
  • From: Daniel P. Berrange
• iscsi w/ libvirt
  • From: Stefan G. Weichinger
• Problems setting up a VM ....
  • From: William A. Mahaffey III
• Re: the naming convention libvirt names a block based storage volume
  • From: Daniel P. Berrange
• Re: the naming convention libvirt names a block based storage volume
  • From: Dave Allan
• Re: the naming convention libvirt names a block based storage volume
  • From: Daniel P. Berrange
• the naming convention libvirt names a block based storage volume
  • From: Yih-Herng Chuang
• Re: virt-manager - how to add /dev/mapper as a storage pool
  • From: Marc Haber
• Re: virt-manager - how to add /dev/mapper as a storage pool
  • From: Cole Robinson
• Re: virt-manager - how to add /dev/mapper as a storage pool
  • From: Marc Haber
• Re: virt-manager - how to add /dev/mapper as a storage pool
  • From: Cole Robinson
• virt-manager - how to add /dev/mapper as a storage pool
  • From: Marc Haber
• Re: XML file location
  • From: Eric Blake
• XML file location
  • From: Jeff
• Create volume wit libvirt API for Python
  • From: Anatoliy Guskov
• Reg: Packaging format for LIBIVRT
  • From: Alphonse Hansel Anthony
• Re: Using libvirt with a preexisting network infrastructure
  • From: Laine Stump
• Re: Custom storage pools/volumes
  • From: Matthias Bolte
• ANNOUNCE: libvirt Perl bindings Sys::Virt 0.9.4 release
  • From: Daniel P. Berrange
• Re: Associating a statefile with an image
  • From: Eric Blake
• Re: Associating a statefile with an image
  • From: sethuraman subbiah
• Re: Associating a statefile with an image
  • From: sethuraman subbiah
• Re: Associating a statefile with an image
  • From: Eric Blake
• Re: centos6.0 unable to install guests w/ kickstart via virt-install
  • From: JDF. Franklin
• CPU Model detection with virsh capabilities
  • From: Olivier BONHOMME
• Re: Snapshot error "command savevm not found"
  • From: Osier Yang
• Snapshot error "command savevm not found"
  • From: Trey Dockendorf
• Re: Migration hangs on Gentoo with KVM
  • From: Jonathan Stoppani
• Guests ignoring config changes
  • From: Michael Jinks
• Q on stupid video tricks
  • From: Whit Blauvelt
• Re: Migration hangs on Gentoo with KVM
  • From: Jonathan Stoppani
• Re: Migration hangs on Gentoo with KVM
  • From: Eric Blake
• Re: Migration hangs on Gentoo with KVM
  • From: Stefan G. Weichinger
• Re: Migration hangs on Gentoo with KVM
  • From: Eric Blake
• Migration hangs on Gentoo with KVM
  • From: Jonathan Stoppani
• Is there a good way to "slot" libvirtd versions?
  • From: Whit Blauvelt
• centos6.0 unable to install guests w/ kickstart via virt-install
  • From: Charles
• Re: ruby-libvirt 0.4.0
  • From: Ohad Levy
• Custom storage pools/volumes
  • From: Mohammed Naser
• UID/GID for qemu & kvm
  • From: Jeff
• Re: ruby-libvirt 0.4.0
  • From: Chris Lalancette
• ANNOUNCE: ruby-libvirt 0.4.0
  • From: Chris Lalancette
• Re: Using libvirt with a preexisting network infrastructure
  • From: Vegard Vesterheim
• Re: Using libvirt with a preexisting network infrastructure
  • From: Tom Hughes
• Using libvirt with a preexisting network infrastructure
  • From: Vegard Vesterheim
• Re: management tools for kvm
  • From: Nicolas Sebrecht
• Re: management tools for kvm
  • From: Stefan G. Weichinger
• Re: management tools for kvm
  • From: Matthias Bolte
• Re: Seg fault in 0.9.4-rc1
  • From: Whit Blauvelt
• Re: management tools for kvm
  • From: David Ehle
• Re: management tools for kvm
  • From: Stefan G. Weichinger
• Re: management tools for kvm
  • From: Eric Blake
• Re: Seg fault in 0.9.4-rc1
  • From: Eric Blake
• Re: management tools for kvm
  • From: Stefan G. Weichinger
• Seg fault in 0.9.4-rc1
  • From: Whit Blauvelt
• Re: management tools for kvm
  • From: Whit Blauvelt
• Re: management tools for kvm
  • From: Stefan G. Weichinger
• qemu:///session vs qemu:///system
  • From: Peter Thomassen
• management tools for kvm
  • From: David M. Barlieb
• Re: small webGUI?
  • From: Stefan G. Weichinger
• Re: with current libvirt git virsh expects vbox, refuses kvm define
  • From: Daniel Veillard
• Re: with current libvirt git virsh expects vbox, refuses kvm define
  • From: Whit Blauvelt
• Re: with current libvirt git virsh expects vbox, refuses kvm define
  • From: Matthias Bolte
• Re: with current libvirt git virsh expects vbox, refuses kvm define
  • From: Matthias Bolte
• Re: with current libvirt git virsh expects vbox, refuses kvm define
  • From: Whit Blauvelt
• Re: with current libvirt git virsh expects vbox, refuses kvm define
  • From: Cole Robinson
• Re: with current libvirt git virsh expects vbox, refuses kvm define
  • From: Matthias Bolte
• Re: VirtualBox headless
  • From: Rodolfo Viana
• Re: with current libvirt git virsh expects vbox, refuses kvm define
  • From: Whit Blauvelt
• Re: lock managers
  • From: Daniel P. Berrange
• Re: with current libvirt git virsh expects vbox, refuses kvm define
  • From: Matthias Bolte
• Re: with current libvirt git virsh expects vbox, refuses kvm define
  • From: Whit Blauvelt
• Re: with current libvirt git virsh expects vbox, refuses kvm define
  • From: Osier Yang
• with current libvirt git virsh expects vbox, refuses kvm define
  • From: Whit Blauvelt
• lock managers
  • From: Whit Blauvelt
• Re: python-libvirt for 0.9.3 leaking file descriptors
  • From: Daniel P. Berrange
• Re: python-libvirt for 0.9.3 leaking file descriptors
  • From: Matthias Bolte
• Re: insert ISO into a KVM guest
  • From: Pete Ashdown
• insert ISO into a KVM guest
  • From: Jeff
• Ping not working after a migration
  • From: Adnan Pasic
• Ping not working after a migration
  • From: Adnan Pasic
• Re: Split a qcow2-image?
  • From: Stefan G. Weichinger
• Re: python-libvirt for 0.9.3 leaking file descriptors
  • From: Osier Yang
• python-libvirt for 0.9.3 leaking file descriptors
  • From: Igor Serebryany
• Re: Wanted: method for qemu hook script to know if called for migration
  • From: Eric Blake
• Re: Wanted: method for qemu hook script to know if called for migration
  • From: Whit Blauvelt
• Re: VirtualBox headless
  • From: Guilherme Santos
• Re: Need help for Qemu-KVM
  • From: Eric Blake
• Re: Wanted: method for qemu hook script to know if called for migration
  • From: Eric Blake
• Wanted: method for qemu hook script to know if called for migration
  • From: Whit Blauvelt
• Re: Split a qcow2-image?
  • From: Eric Blake
• Re: Split a qcow2-image?
  • From: Stefan G. Weichinger
• Split a qcow2-image?
  • From: Stefan G. Weichinger
• VM creation using libvirtd for the qemu-KVM hypervisor
  • From: bala suru
• Need help for Qemu-KVM
  • From: kp chetan
• Re: Is libvirt supported on Citrix Xenserver?
  • From: Matthias Bolte
• Re: Is libvirt supported on Citrix Xenserver?
  • From: Matthias Bolte
• problem w/ libvirt-0.8.2-15.el5 and CentOS
  • From: Jim Glennon
• Re: RAID1 over IP?
  • From: Emmanuel Noobadmin
• Migrate failed
  • From: zhang xintao
• Re: RAID1 over IP?
  • From: David Ehle
• Re: cannot perform tunnelled migration without using peer2peer flag
  • From: Eric Blake
• Re: cannot perform tunnelled migration without using peer2peer flag
  • From: Daniel P. Berrange
• Re: cannot perform tunnelled migration without using peer2peer flag
  • From: Eric Blake
• Re: cannot perform tunnelled migration without using peer2peer flag
  • From: Daniel P. Berrange
• Re: [libvirt-users] Is libvirt supported on Citrix Xenserver?
  • From: sharmila radha krishnan
• Re: [libvirt-users] Is libvirt supported on Citrix Xenserver?
  • From: sharmila radha krishnan
• Re: cannot perform tunnelled migration without using peer2peer flag
  • From: Jiri Denemark
• Re: RAID1 over IP?
  • From: David Ehle
• Re: RAID1 over IP?
  • From: Emmanuel Noobadmin
• Re: cannot perform tunnelled migration without using peer2peer flag
  • From: Eric Blake
• RAID1 over IP?
  • From: David Ehle
• Re: Migrate KVM Guest OS failed
  • From: Osier Yang
• Re: cannot perform tunnelled migration without using peer2peer flag
  • From: Osier Yang
• cannot perform tunnelled migration without using peer2peer flag
  • From: zhang xintao
• Migrate KVM Guest OS failed
  • From: zhang xintao
• Re: Is libvirt supported on Citrix Xenserver?
  • From: G Naresh Kumar
• [libvirt] ANNOUNCE: libvirt Perl bindings Sys::Virt 0.9.3 release
  • From: Daniel P. Berrange
• Re: Is libvirt supported on Citrix Xenserver?
  • From: Matthias Bolte
• Re: Is libvirt supported on Citrix Xenserver?
  • From: G Naresh Kumar
• Re: Unable to start libvirtd 0.9.3 on Ubuntu 10.10
  • From: Matthias Bolte
• Unable to start libvirtd 0.9.3 on Ubuntu 10.10
  • From: Heath Petersen
• Problem starting libvirtd 0.9.3 on Ubuntu
  • From: Heath Petersen
• Re: virt-manager/libvirt backwards compatibility problem?
  • From: Whit Blauvelt
• Re: Compatibility with Parallels Virtouzo
  • From: Matthias Bolte
• Re: Compatibility with Parallels Virtouzo
  • From: Andreas Mauf
• Re: Compatibility with Parallels Virtouzo
  • From: Matthias Bolte
• Re: Compatibility with Parallels Virtouzo
  • From: Andreas Mauf
• Re: Compatibility with Parallels Virtouzo
  • From: Matthias Bolte
• Re: Compatibility with Parallels Virtouzo
  • From: Andreas Mauf
• Re: virt-manager/libvirt backwards compatibility problem?
  • From: Whit Blauvelt
• virt-manager/libvirt backwards compatibility problem?
  • From: Whit Blauvelt
• ANNOUNCE: libvirt Perl bindings Sys::Virt 0.9.2 release
  • From: Daniel P. Berrange
• Questions on libvirt hook scripts
  • From: Whit Blauvelt
• Re: NPIV + KVM
  • From: Dave Allan
• Re: Creating a CENTOS VM
  • From: Dale Amon
• Creating a CENTOS VM
  • From: Dale Amon
• Re: Changing path of VM configuration files
  • From: Eric Blake
• Re: Changing path of VM configuration files
  • From: Soeren Grunewald
• Changing path of VM configuration files
  • From: Jatin Kumar
• KVM and <interface type='ethernet'>
  • From: Maximilian Wilhelm
• Is arping useful if a VM is brought up on a different (bridged) interface/machine?
  • From: Whit Blauvelt
• Re: [Qemu-devel] SSH console for qemu
  • From: Nikita A Menkovich
• Re: [Qemu-devel] SSH console for qemu
  • From: Stefan Hajnoczi
• Re: [Qemu-devel] SSH console for qemu
  • From: Eric Blake
• Re: [Qemu-devel] SSH console for qemu
  • From: Nikita A Menkovich
• Re: Guest-networking: Two subnets = Guests cannot connect to the other subnet
  • From: Laine Stump
• Re: [Qemu-devel] SSH console for qemu
  • From: Stefan Hajnoczi
• SSH console for qemu
  • From: Nikita A Menkovich
• Guest-networking: Two subnets = Guests cannot connect to the other subnet
  • From: mailinglists
• (no subject)
  • From: Abhishek Gupta
• Re: Associating a statefile with an image
  • From: Eric Blake
• Re: Associating a statefile with an image
  • From: sethuraman subbiah
• Re: Associating a statefile with an image
  • From: Eric Blake
• Xm driver only supports modifying persistent config.
  • From: zhuxuegang
• Helping on libvirt
  • From: negar behinaeen
• Unable to boot from a vdi image
  • From: yeswanth swami
• Associating a statefile with an image
  • From: sethuraman subbiah
• NPIV + KVM
  • From: Eric Ross
• Re: [PATCH] Use correct param names in Product getters
  • From: Eric Blake
• [PATCH] Use correct param names in Product getters
  • From: Zeeshan Ali (Khattak)
• ANNOUNCE: oz 0.5.0 release
  • From: Chris Lalancette
• vnc over ssh failing
  • From: Pete Ashdown
• ANNOUNCE: libvirt Perl bindings Sys::Virt 0.2.8 release
  • From: Daniel P. Berrange
• ANNOUNCE: libvirt Perl bindings Sys::Virt 0.2.7 release
  • From: Daniel P. Berrange
• Re: Starting libvirtd cuts off host access to external network
  • From: PLD
• Re: Starting libvirtd cuts off host access to external network
  • From: Daniel P. Berrange
• Starting libvirtd cuts off host access to external network
  • From: PLD
• Re: libvirt-users Digest, Vol 18, Issue 17
  • From: Eric Blake
• Re: libvirt-users Digest, Vol 18, Issue 17
  • From: m m
• Bypass USB to Xen VM
  • From: Lorenzo Milesi
• Display port allocation
  • From: Tom Hughes
• Re: virsh slow on execution
  • From: Lorenzo Milesi
• virsh slow on execution
  • From: Lorenzo Milesi
• Problems migrating xen domains
  • From: Lorenzo Milesi
• basic network setup
  • From: Jerry Worley
• Virsh Console - Changes in guest
  • From: Abhishek Gupta
• Re: 2 virsh consoles on the same hypervisor causes conflicts
  • From: Nicolas Sebrecht
• Re: Virtual switches support (Openvswitch, VDE, ...)
  • From: Jérémie Tarot
• Re: Base server as file server.
  • From: arun.sasi1
• Re: Base server as file server.
  • From: Stefan Hajnoczi
• libvir: QEMU error : cannot set ownership
  • From: Ali Shoker
• Base server as file server.
  • From: arun.sasi1
• Re: 2 virsh consoles on the same hypervisor causes conflicts
  • From: Daniel P. Berrange
• 2 virsh consoles on the same hypervisor causes conflicts
  • From: David Lane
• Re: Is libvirt supported on Citrix Xenserver?
  • From: Matthias Bolte
• Re: Virtual switches support (Openvswitch, VDE, ...)
  • From: Daniel Veillard
• Re: Is libvirt supported on Citrix Xenserver?
  • From: G Naresh Kumar
• Re: Is libvirt supported on Citrix Xenserver?
  • From: Matthias Bolte
• Is libvirt supported on Citrix Xenserver?
  • From: G Naresh Kumar
• Re: request to add an application the app listing on libvirt site
  • From: Eric Blake
• Re: request to add an application the app listing on libvirt site
  • From: Ohad Levy
• Re: Difference between function Migrate and Migrate2
  • From: Eric Blake
• Re: Boot delay
  • From: Jeff
• Re: hook scripts - not in Ubuntu packages?
  • From: Michal Privoznik
• hook scripts - not in Ubuntu packages?
  • From: Whit Blauvelt
• Re: Boot delay
  • From: Michal Privoznik
• Boot delay
  • From: Jeff
• Re: libvirt-bin MOSTLY fails to create default virtual network
  • From: Laine Stump
• Difference between function Migrate and Migrate2
  • From: Abhishek Gupta
• e: How to disconnect the ISO image using virsh
  • From: Jeff
• stuck after upgrade
  • From: Julian Cerruti
• Re: libvirt-users Digest, Vol 18, Issue 11
  • From: Chris Lalancette
• Re: Resizing ext4 fedora qemu guest
  • From: Richard W.M. Jones
• Re: libvirt-users Digest, Vol 18, Issue 11
  • From: m m
• Re: Shared Folders
  • From: Guilherme Santos
• old, deleted LUN still showing up after a virsh pool-refresh
  • From: Tom Georgoulias
• Re: small webGUI?
  • From: Stefan G. Weichinger
• ANNOUNCE: oz 0.4.0 release
  • From: Chris Lalancette
• Re: libvirt-users Digest, Vol 18, Issue 7(libvirt-bin MOSTLY fails to create default virtual network)
  • From: m m
• Re: [Qemu-devel] Qcow2
  • From: arun.sasi1
• Re: [Qemu-devel] Qcow2
  • From: Stefan Hajnoczi
• small webGUI?
  • From: Stefan G. Weichinger
• Resizing ext4 fedora qemu guest
  • From: Alex
• Re: [Qemu-devel] Qcow2
  • From: arun.sasi1
• Re: Shared Folders
  • From: Matthias Bolte
• Re: Shared Folders
  • From: Guilherme Santos
• Re: Shared Folders
  • From: Matthias Bolte
• Re: request to add an application the app listing on libvirt site
  • From: Daniel Veillard
• Re: Shared Folders
  • From: Guilherme Santos
• libvirt-bin MOSTLY fails to create default virtual network
  • From: m m
• Release of libvirt-0.9.2
  • From: Daniel Veillard
• request to add an application the app listing on libvirt site
  • From: Ohad Levy
• Unable to migrate a vm
  • From: PREETHI RAMESH
• Re: libvirtError: internal error Domain mytest didn't show up
  • From: Chun Tat David Chu
• Re: libvirtError: internal error Domain mytest didn't show up
  • From: Chun Tat David Chu
• io=native
  • From: Troels Arvin
• Re: libvirtError: internal error Domain mytest didn't show up
  • From: Osier Yang
• libvirtError: internal error Domain mytest didn't show up
  • From: Chun Tat David Chu
• Shared Folders
  • From: Guilherme Santos
• Virtual switches support (Openvswitch, VDE,...)
  • From: Jérémie Tarot
• unable to migrate guests
  • From: PREETHI RAMESH
• no virtio in virt-manager
  • From: Konstantin Svist
• Re: [Qemu-devel] Qcow2
  • From: arun.sasi1
• Re: [Qemu-devel] Qcow2
  • From: arun.sasi1
• Forward routed network bridge on system's vlan
  • From: RaSca
• Re: libvirt boots from Knoppix-CD but not Debian-CD
  • From: Christian Brandt
• boot debian6 cd?
  • From: Christian Brandt
• Re: kvm.h not found
  • From: Matthias Bolte
• Re: polkit error when starting virt-manager on fedora14
  • From: Alex
• Failed to connect to Xen 4.1 using virsh
  • From: YAO
• libvirt boots from Knoppix-CD but not Debian-CD
  • From: Christian Brandt
• polkit error when starting virt-manager on fedora14
  • From: Alex
• Replace library WinXPs by virtual WinXPs as on a linux Fedora system?
  • From: Rob
• Replace library WinXPs by virtual WinXPs as on a linux Fedora system?
  • From: Rob
• Xen and live migration with VIR_MIGRATE_PERSIST_DEST
  • From: Thibault VINCENT
• Re: Java Bindings for libvirt
  • From: Daniel Veillard
• kvm.h not found
  • From: --[ UxBoD ]--
• Re: Java Bindings for libvirt
  • From: Matthias Bolte
• Re: Java Bindings for libvirt
  • From: Atul Gosain
• Re: Live Migration UDP implementation
  • From: Eric Blake
• Live Migration UDP implementation
  • From: prakash hr
• Re: Compatibility with Parallels Virtouzo
  • From: Matthias Bolte
• Re: getting live migration to work..
  • From: Jelle de Jong
• getting live migration to work..
  • From: Jelle de Jong
• Improving video for Windows7 kvm guest on fc14
  • From: Alex
• Compatibility with Parallels Virtouzo
  • From: Andreas Mauf
• Migrate doesn't support copy-storage-all
  • From: Abhishek Gupta
• Java Bindings for libvirt
  • From: Atul Gosain
• Re: [Qemu-devel] Qcow2
  • From: Stefan Hajnoczi
• Re: [Qemu-devel] Qcow2
  • From: arun.sasi1
• Blank console and no boot
  • From: Francesc Guasch
• Re: [Qemu-devel] Qcow2
  • From: Stefan Hajnoczi
• Re: [Qemu-devel] Qcow2
  • From: arun.sasi1
• Re: [Qemu-devel] Qcow2
  • From: Stefan Hajnoczi
• Trying to re-compile libvirt package on Ubuntu Lucid
  • From: Lars Nordin
• Re: Howto set the option script=no for a tap device in the xml file
  • From: Christian Spann
• Re: (no subject)
  • From: Matthias Bolte
• Re: (no subject)
  • From: Abhishek Gupta
• Looking for a contact
  • From: Dale Amon
• Livemigrate problems.
  • From: Gian Uberto Lauri
• Howto set the option script=no for a tap device in the xml file
  • From: Christian Spann
• (no subject)
  • From: Abhishek Gupta
• Re: libvirt connection timeout
  • From: Antoine COETSIER
• Re: (no subject)
  • From: Daniel Veillard
• (no subject)
  • From: Abhishek Gupta
• Re: (no subject)
  • From: Abhishek Gupta
• Re: (no subject)
  • From: Matthias Bolte
• (no subject)
  • From: Abhishek Gupta
• Re: Problem after restarting libvirt
  • From: Osier Yang
• Re: Booting from scsi [SOLVED]
  • From: bhasker
• Booting from scsi
  • From: bhasker
• Fwd: Problems using virt-install to create KVM CentOS 5.6 guest
  • From: Emmanuel Noobadmin
• Re: libvirt connection timeout
  • From: Matthias Bolte
• Turn off AHCI? bad sectors?
  • From: David Ehle
• libvirt connection timeout
  • From: Antoine COETSIER
• Re: point-to-point connection between vm and host
  • From: Jorge Somavilla
• blkio issue
  • From: Nikita A Menkovich
• Re: Problems connecting to Virtualbox hypervisor using libvirt java binding
  • From: Matthias Bolte
• Problems connecting to Virtualbox hypervisor using libvirt java binding
  • From: Tarciso Oliveira
• Re: Problem after restarting libvirt
  • From: Nikita A Menkovich
• Re: Logfile with domain states
  • From: Mike Hall
• Re: Audio pass through
  • From: Andrew Cathrow
• Logfile with domain states
  • From: s . b
• Re: Audio pass through
  • From: Hisao Taguchi
• Audio pass through
  • From: Mike Hall
• Problems using virt-install to create KVM CentOS 5.6 guest
  • From: Emmanuel Noobadmin
• Re: Problem after restarting libvirt
  • From: Osier Yang
• Re: Objective: run commands in the domain. Trouble: setting up a console
  • From: Osier Yang
• Objective: run commands in the domain. Trouble: setting up a console
  • From: Guilherme Santos
• Re: converting save/dump output into physical memory image
  • From: Daniel P. Berrange
• kvm libvirt migration problem
  • From: 潘昊
• Re: converting save/dump output into physical memory image
  • From: Andrew Tappert
• Re: converting save/dump output into physical memory image
  • From: Eric Blake
• converting save/dump output into physical memory image
  • From: Andrew Tappert
• Problem after restarting libvirt
  • From: Nikita A Menkovich
• Re: [libvirt] Error: unable to connect to '/var/run/libvirt/libvirt-sock'
  • From: guan qin
• Re: [libvirt] Error: unable to connect to '/var/run/libvirt/libvirt-sock'
  • From: Daniel P. Berrange
• Error: unable to connect to '/var/run/libvirt/libvirt-sock'
  • From: guan qin
• Re: Listing machines as non-root user
  • From: Maciej Gałkiewicz
• Release of libvirt-0.9.1
  • From: Daniel Veillard
• Re: virt-install becoming a headache
  • From: Cole Robinson
• Re: can't up the eth in the vm and access to network
  • From: Osier Yang
• Re: can't up the eth in the vm and access to network
  • From: guan qin
• Re: can't up the eth in the vm and access to network
  • From: guan qin
• Re: can't up the eth in the vm and access to network
  • From: guan qin
• virt-install becoming a headache
  • From: Ricard Daniel Santafe Bence
• Re: can't up the eth in the vm and access to network
  • From: Osier Yang
• Re: can't up the eth in the vm and access to network
  • From: guan qin
• Re: LibVirtD Networking
  • From: Whit Blauvelt
• LibVirtD Networking
  • From: ssaleh
• Re: can't up the eth in the vm and access to network
  • From: David White
• Re: can't up the eth in the vm and access to network
  • From: Marco van Beek
• Re: [libvirt] [Libvir] libvirt & vde_switch
  • From: Robert Šmol
• Re: [libvirt] [Libvir] libvirt & vde_switch
  • From: Matthias Bolte
• Re: [Libvir] libvirt & vde_switch
  • From: Robert Šmol
• can't up the eth in the vm and access to network
  • From: guan qin
• Re: port forwarding
  • From: Ireneusz Szcześniak
• Re: port forwarding
  • From: Laine Stump
• Re: port forwarding
  • From: Whit Blauvelt
• Re: port forwarding
  • From: Laine Stump
• Re: [Libvir] libvirt & vde_switch
  • From: Laine Stump
• Re: [Libvir] libvirt & vde_switch
  • From: Robert Šmol
• port forwarding
  • From: Ireneusz Szcześniak
• Re: Disk not bootable from yesterday resolved
  • From: David Mansfield
• Re: Disk not bootable from yesterday resolved
  • From: David Mansfield
• Disk not bootable from yesterday resolved
  • From: David Brown
• Re: problem installing libvirt from source
  • From: Osier Yang
• Re: Listing machines as non-root user
  • From: Maciej Gałkiewicz
• Re: Listing machines as non-root user
  • From: Jan
• Re: Listing machines as non-root user
  • From: Maciej Gałkiewicz
• Re: Listing machines as non-root user
  • From: Jan
• Re: Listing machines as non-root user
  • From: Maciej Gałkiewicz
• Re: virt-clone: clone not bootable
  • From: Osier Yang
• Re: virt-image issue
  • From: Osier Yang
• Re: virt-clone: clone not bootable
  • From: Whit Blauvelt
• Re: virt-clone: clone not bootable
  • From: David Brown
• Re: virt-clone: clone not bootable
  • From: Whit Blauvelt
• virt-clone: clone not bootable
  • From: David Brown
• Re: problem installing libvirt from source
  • From: Lars Nordin
• Re: problem installing libvirt from source
  • From: Matthias Bolte
• problem installing libvirt from source
  • From: Lars Nordin
• Re: Adding more disks...
  • From: Jan
• Re: Listing machines as non-root user
  • From: Jan
• How to providing virtual USB disk (usb-storage for QEMU) devices to guests?
  • From: oPKo o
• Listing machines as non-root user
  • From: Maciej Gałkiewicz
• virt-image issue
  • From: Zvi Dubitzky
• Re: problem with qemu
  • From: Osier Yang
• Re: Media autoremove
  • From: Osier Yang
• Re: Adding more disks...
  • From: Dale Amon
• Re: Setup Mulitple VM's
  • From: Matthew Macdonald-Wallace
• problem with qemu
  • From: Miroslav Ludvik
• vvirsh memtune
  • From: Zvi Dubitzky
• Adding more disks...
  • From: Dale Amon
• 2 hosts, mirrored VM storage, avoiding conflicting VM instances
  • From: Whit Blauvelt
• PCI Pass through of atheros card
  • From: Varun Ganesh
• Media autoremove
  • From: Nikita A Menkovich
• Re: domain not present after shutdown
  • From: David White
• Setup Mulitple VM's
  • From: ssaleh
• Re: domain not present after shutdown
  • From: Osier Yang
• Re: domain not present after shutdown
  • From: Osier Yang
• Re: [PATCHv11 3/6] libvirt/qemu - clean up UpdateDevice for consolidation.
  • From: KAMEZAWA Hiroyuki
• Re: [PATCHv11 3/6] libvirt/qemu - clean up UpdateDevice for consolidation.
  • From: Eric Blake
• Re: No IOMMU found. Unable to assign device
  • From: Robin Axelsson
• Re: [PATCHv11 0/6] libvirt/qemu - persistent modification of devices
  • From: Eric Blake
• Re: No IOMMU found. Unable to assign device
  • From: David White
• No IOMMU found. Unable to assign device
  • From: Marco van Beek
• Re: domain not present after shutdown
  • From: dave white
• Re: domain not present after shutdown
  • From: dave white
• Re: kvm virtual server boot order
  • From: Jiri Denemark
• [PATCH 6/6] libvirt/qemu - support update cdrom/floppy persistent
  • From: KAMEZAWA Hiroyuki
• [PATCHv11 5/6] libvirt/qemu - Support changes of disks by VIR_DOMAIN_DEVICE_MODIFY_CONFIG
  • From: KAMEZAWA Hiroyuki
• [PATCHv11 4/6] libvirt/qemu support persistent device modification
  • From: KAMEZAWA Hiroyuki
• [PATCHv11 3/6] libvirt/qemu - clean up UpdateDevice for consolidation.
  • From: KAMEZAWA Hiroyuki
• [PATCHv11 2/6] libvirt/qemu - clean up At(De)tachDeviceFlags() for consolidation.
  • From: KAMEZAWA Hiroyuki
• [PATCHv11 1/6] libvirt/qemu - Centralize device modification in the more flexible APIs
  • From: KAMEZAWA Hiroyuki
• [PATCHv11 0/6] libvirt/qemu - persistent modification of devices
  • From: KAMEZAWA Hiroyuki
• Re: domain not present after shutdown
  • From: Osier Yang
• domain not present after shutdown
  • From: David White
• Re: Undefined interfaces?
  • From: Laine Stump
• Re: Accessing a MAC address from inside the VM?
  • From: David Lane
• Re: Accessing a MAC address from inside the VM?
  • From: Igor Serebryany
• kvm virtual server boot order
  • From: Yee Ja
• USB2 passthrough
  • From: Marco van Beek
• Undefined interfaces?
  • From: Alex
• Re: Default network / net-edit
  • From: Laine Stump
• Default network / net-edit
  • From: ssaleh
• Re: add file.img in libvirt
  • From: Daniel Berteaud
• add file.img in libvirt
  • From: Marco Mirabile
• Accessing a MAC address from inside the VM?
  • From: David Lane
• Re: Problems setting up bridge
  • From: Nataraj
• Problems setting up bridge
  • From: Alex
• Re: Where actually is the callback triggered?
  • From: Matthias Bolte
• Re: custom iptables rules
  • From: Jan
• Re: Where actually is the callback triggered?
  • From: kadir yüceer
• Re: Where actually is the callback triggered?
  • From: Matthias Bolte
• Where actually is the callback triggered?
  • From: kadir yüceer
• Re: virsh shutdown
  • From: Igor Serebryany
• Re: virsh shutdown
  • From: None
• Re: virsh shutdown
  • From: paul.worner
• virsh shutdown
  • From: Zvi Dubitzky
• Re: point-to-point connection between vm and host
  • From: Jorge Somavilla
• Re: point-to-point connection between vm and host
  • From: paul.worner
• point-to-point connection between vm and host
  • From: Jorge Somavilla
• Re: Listing shut off domains
  • From: None
• custom iptables rules
  • From: Kurian Thayil
• Re: Python API - setting client certificate path
  • From: Wojciech Gumularz
• Re: Python API - setting client certificate path
  • From: Matthias Bolte
• Python API - setting client certificate path
  • From: Wojciech Gumularz
• Listing shut off domains
  • From: None
• Re: [Libvir] libvirt & vde_switch
  • From: Robert Šmol
• Re: [Libvir] libvirt & vde_switch
  • From: Nicolas Sebrecht
• Re: [Libvir] libvirt & vde_switch
  • From: Robert Šmol
• Re: [Libvir] libvirt & vde_switch
  • From: Nicolas Sebrecht
• Re: Can I update libvirt while KVM guest os are running
  • From: Masanari Iida
• Registering a callback in Java
  • From: kadir yüceer
• Can not convert LVM over two vmdk files
  • From: Marc Boorshtein
• [Libvir] libvirt & vde_switch
  • From: Robert Šmol
• Re: Protocols used for migration
  • From: Marc Seward
• Creating a network bridge with multiple interfaces
  • From: Alex
• Protocols used for migration
  • From: linux user
• iptables errors with guest
  • From: Alex
• Release of libvirt-0.9.0
  • From: Daniel Veillard
• Re: LIBVIRT migration
  • From: Francesc Guasch
• LIBVIRT migration
  • From: Marcela Castro León
• Re: Can I update libvirt while KVM guest os are running
  • From: Masanari Iida
• Re: LIBVIRT migration
  • From: Marcela Castro León
• Re: LIBVIRT migration
  • From: Marcela Castro León
• Re: bridge and route without IP
  • From: Laine Stump
• Re: LIBVIRT migration
  • From: Daniel P. Berrange
• Re: LIBVIRT migration
  • From: Marcela Castro León
• Re: LIBVIRT migration
  • From: jurgen . depicker
• Can I update libvirt while KVM guest os are running
  • From: Masanari Iida
• LIBVIRT migration
  • From: Marcela Castro León
• Using Restore
  • From: Marcela Castro León
• bridge and route without IP
  • From: Robert Šmol
• ANNOUNCE: oz 0.3.0 release
  • From: Chris Lalancette
• Re: ESX networking functions
  • From: James Barkley
• Re: ESX networking functions
  • From: Matthias Bolte
• Re: How to disconnect the ISO image using virsh
  • From: Daniel P. Berrange
• ESX networking functions
  • From: James Barkley
• Re: How to disconnect the ISO image using virsh
  • From: Osier Yang
• Re: How to disconnect the ISO image using virsh
  • From: Masanari Iida
• How to disconnect the ISO image using virsh
  • From: Masanari Iida
• block migration
  • From: mkey
• Re: Invitation to connect on LinkedIn
  • From: kadir yüceer
• Invitation to connect on LinkedIn
  • From: Kadir Yuceer
• Re: Event Types Libvirt can handle
  • From: Osier Yang
• Event Types Libvirt can handle
  • From: kadir yüceer
• Re: stage of data upload/download patch
  • From: Daniel P. Berrange
• stage of data upload/download patch
  • From: James Barkley
• Re: libvirt-users Digest, Vol 15, Issue 26
  • From: Zvi Dubitzky
• virsh sechedinfo with libvirt-0.8.8
  • From: Zvi Dubitzky
• Re: libvirt-users Digest, Vol 15, Issue 25
  • From: Zvi Dubitzky
• saslpasswd2 and virsh -c qemu+tcp:///system <command>
  • From: Zvi Dubitzky
• Re: how to restart the network connection of kvm guest OS ?
  • From: Laine Stump
• Re: livemigration over specific bridge/nic?
  • From: Christoph Raible
• Re: livemigration over specific bridge/nic?
  • From: Osier Yang
• Re: how to restart the network connection of kvm guest OS ?
  • From: Osier Yang
• livemigration over specific bridge/nic?
  • From: Christoph Raible
• how to restart the network connection of kvm guest OS ?
  • From: 何文聪
• Re: libvirt unavailable while a VM is in migration?]
  • From: Igor Serebryany
• Re: storage pool vs storage volume
  • From: Zvi Dubitzky
• Re: using more than 1 core by a virtual machine
  • From: Osier Yang
• Re: About monitoring
  • From: Osier Yang
• Re: start/stop hooks
  • From: Osier Yang
• About monitoring
  • From: kadir yüceer
• error : remoteDispatchAuthPolkit:3799 : Policy kit denied action org.libvirt.unix.manage from pid 2381
  • From: Christoph Raible
• start/stop hooks
  • From: Mateusz Kijowski
• Re: using more than 1 core by a virtual machine
  • From: Zvi Dubitzky
• Re: using more than 1 core by a virtual machine
  • From: Osier Yang
• Re: storage pool vs storage volume
  • From: Osier Yang
• storage pool vs storage volume
  • From: Zvi Dubitzky
• libvirtd -- iptables
  • From: Kurian Thayil
• Re: RH6 qemu expects driver name
  • From: Daniel P. Berrange
• Re: RH6 qemu expects driver name
  • From: Robert Šmol
• Re: RH6 qemu expects driver name
  • From: Daniel P. Berrange
• using more than 1 core by a virtual machine
  • From: Zvi Dubitzky
• Re: SSH recovery console
  • From: JT Justman
• Re: With which VMM ,libvirt cooperates the most?
  • From: Laine Stump
• SSH recovery console
  • From: Nikita A Menkovich
• RH6 qemu expects driver name
  • From: Robert Šmol
• With which VMM ,libvirt cooperates the most?
  • From: kadir yüceer
• remote xen+ssh://host
  • From: sd
• Re: Beware! Newbie is in town
  • From: kadir yüceer
• Re: Beware! Newbie is in town
  • From: Matthias Bolte
• Re: Beware! Newbie is in town
  • From: Berend Dekens
• Re: Beware! Newbie is in town
  • From: kadir yüceer
• Re: Beware! Newbie is in town
  • From: Berend Dekens
• Re: Beware! Newbie is in town
  • From: kadir yüceer
• cgroups limitations on Virtual machines
  • From: Zvi Dubitzky
• Beware! Newbie is in town
  • From: kadir yüceer
• Re: QEMU monitor
  • From: Osier Yang
• Re: QEMU monitor
  • From: Nikita A Menkovich
• Re: Libvirt with multipath devices and/or FC on NPIV
  • From: C.D.
• Re: ruby bindings has two gems (I think)
  • From: Chris Lalancette
• Libvirt with multipath devices and/or FC on NPIV
  • From: C.D.
• Re: QEMU monitor
  • From: Osier Yang
• Libvirt with multipath devices and/or FC on NPIV
  • From: C.D.
• Libvirt with multipath devices and/or FC on NPIV
  • From: C.D.
• Re: ruby bindings has two gems (I think)
  • From: James Barkley
• Re: Issue creating vm channel
  • From: SAURAV LAHIRI
• Issue creating vm channel
  • From: SAURAV LAHIRI
• Re: dnsmasq not started when no dhcp enabled ?
  • From: Laine Stump
• Re: [libvirt] libvirt configuration problem
  • From: Matthias Bolte
• QEMU monitor
  • From: Nikita A Menkovich
• libvirt/kvm/qemu: pointopoint routed setup?
  • From: Andreas Jellinghaus
• Re: Migrating existing debian system to KVM/libvirt
  • From: Gian Uberto Lauri
• libvirt configuration problem
  • From: Onkar Mahajan
• Migrating existing debian system to KVM/libvirt
  • From: Randall Webstuff
• Re: client certificate path hard coded?
  • From: Anthony Goddard
• Re: ruby bindings has two gems (I think)
  • From: Chris Lalancette
• Re: client certificate path hard coded?
  • From: Matthias Bolte
• client certificate path hard coded?
  • From: Anthony Goddard
• libvirt and phyp driver (Power Hypervisor guests)
  • From: Boninsegna, Werner (Werner, ES-Best-Shore-Services-China-SH)
• ruby bindings has two gems (I think)
  • From: James Barkley
• Re: unable to connect to libvirtd at '*': No route to host
  • From: Christoph Raible
• Re: unable to connect to libvirtd at '*': No route to host
  • From: Christoph Raible
• venet as network device for openvz based VMs
  • From: knawnd
• Re: unable to connect to libvirtd at '*': No route to host
  • From: knawnd
• unable to connect to libvirtd at '*': No route to host
  • From: Christoph Raible
• Re: ifname in openvz container
  • From: knawnd
• Re: diskspace and diskinodes tag for openvz
  • From: knawnd
• Re: openvz specific values for domain/devices tag
  • From: knawnd
• Python API and events, how to deal with libvirtd stop/start
  • From: Jasper
• Re: dnsmasq not started when no dhcp enabled ?
  • From: jbd
• dnsmasq not started when no dhcp enabled ?
  • From: jbd
• Re: openvz specific values for domain/devices tag
  • From: Osier Yang
• Re: CDROM
  • From: Osier Yang
• CDROM
  • From: Markiewicz, Patrick F (N-No Laurels)
• Re: diskspace and diskinodes tag for openvz
  • From: Matthias Bolte
• diskspace and diskinodes tag for openvz
  • From: knawnd
• openvz specific values for domain/devices tag
  • From: knawnd
• guest creation problem on pv dom0 kernel
  • From: Tapas Mishra
• Re: EXTERNAL: Re: Connecting to Standalone KVM
  • From: Markiewicz, Patrick F (N-No Laurels)
• Re: Connecting to Standalone KVM
  • From: Laine Stump
• Connecting to Standalone KVM
  • From: Markiewicz, Patrick F (N-No Laurels)
• wrong domain type for openvz
  • From: knawnd
• /etc/vz/vznetctl.conf has to be /etc/vz/vznet.conf
  • From: knawnd
• Re: ifname in openvz container
  • From: knawnd
• ifname in openvz container
  • From: knawnd
• Re: libvirt + ESX (HTTP response code 400 for call to 'Login')
  • From: Matthias Bolte
• Re: libvirt + ESX (HTTP response code 400 for call to 'Login')
  • From: Hereward Cooper