Hi,
I'm using libvirt 0.8.3 on Fedora 14 (as I wrote earlier, I'm having some
trouble updating to the newest version), and I'm having problems getting iscsi
and mpath storage pools to work in a usable and consistent manner.
I have two storage pools defined on the host machine, one for raw iscsi-
devices and one for those same iscsi devices device-mapped by multipath. They
look like this:
<pool type='iscsi'>
<name>iscsi01</name>
<source>
<host name='10.3.1.15'/>
<device
path='iqn.1984-05.com.dell:powervault.md3200i.6782bcb0000859f3000000004d3eec7d'/>
</source>
<target>
<path>/dev/disk/by-id</path>
</target>
</pool>
and:
<pool type="mpath">
<name>mpath01</name>
<target>
<path>/dev/mapper</path>
</target>
</pool>
I chose <path>/dev/disk/by-id</path> over /dev/disk/by-path for the iscsi pool
because I need to be able to migrate running virtual machines to other hosts,
so the actual device paths for the disks need to be the same on all hosts in
the cluster.
I have two LUNs configured in the iSCSI array, and when I list the volumes in
the iscsi pool, I get this:
virsh # vol-list iscsi01
Name Pfad
-----------------------------------------
23.0.0.1 /dev/disk/by-id/wwn-0x6782bcb0000859f3000007004e680190
23.0.0.2 /dev/disk/by-id/scsi-36782bcb0000859f3000007294e6e73f2
Apparently, for some weird reason, libvirt chooses one naming scheme for one
of the volumes and another for the other one. This a problem for me for two
reasons.
1 - Once I create a new lun for a new VM, rescan the iscsi bus and refresh
libvirt's pool (see my mail from 24th of August on this list), I need to be
able to automatically and reliably identify the corresponding new volumes in
libvirt's volume list, so I can initialize them by copying an OS image onto
them and then assign them to the new virtual machine. This is made a lot
harder if libvirt randomly switches between naming schemes - though still
feasible if I'm aware of the problem.
2 - I need to be able to migrate running VMs to a different host machine, in
case the current one is overloaded or in need of maintenance. This is bound to
be problematic if the storage volumes go by different path names on the
different hosts.
Both LUNs do appear under both naming schemes under /dev/disk/by-id:
ls /dev/disk/by-id/
[...]
scsi-36782bcb0000859f3000007004e680190
[...]
scsi-36782bcb0000859f3000007294e6e73f2
scsi-36a4badb00b0f910012e0fccb07606fe6
[...]
wwn-0x6782bcb0000859f3000007004e680190
[...]
wwn-0x6782bcb0000859f3000007294e6e73f2
wwn-0x6a4badb00b0f910012e0fccb07606fe6
[...]
(snipped some irrelevant parts)
With the mpath pool, it's even worse: One of the two volumes is completely
missing:
virsh # vol-list mpath01
Name Pfad
-----------------------------------------
dm-3 /dev/mapper/36782bcb0000859f3000007004e680190
Both iscsi volumes have in fact been picked up by multipathd and do appear in
/dev/mapper/, too, but no matter how often I say refresh-pool mpath01, it will
always only show the one volume.
Does anybody know of these problems or how to work around them? Are these
problems solved in newer versions? (I could not find anyhting in the
bugtracker...)
Guido
