Libvirt Users

• Thread Index

• Re: [Lxc-users] Failed to access console after launching LXC through libvirt
  • From: Sujay M
• Re: Failed to access console after launching LXC through libvirt
  • From: unicell
• Failed to access console after launching LXC through libvirt
  • From: unicell
• Re: OpenStack+libvirt+lxc: lxcContainerGetSubtree:1199 : Failed to read /proc/mounts
  • From: unicell
• Re: OpenStack+libvirt+lxc: lxcContainerGetSubtree:1199 : Failed to read /proc/mounts
  • From: Daniel P. Berrange
• OpenStack+libvirt+lxc: lxcContainerGetSubtree:1199 : Failed to read /proc/mounts
  • From: unicell
• Re: Problems when filtering on icmpv6
  • From: Guido Winkelmann
• Re: move VM disk images between storage pools on the same host
  • From: Paul Raines
• Re: move VM disk images between storage pools on the same host
  • From: Eric Blake
• move VM disk images between storage pools on the same host
  • From: Paul Raines
• Re: libvirt with lxc: internal error The 'cpuacct', 'devices' & 'memory' cgroups controllers must be mounted
  • From: Eric Blake
• Virt-io Kernels for older RHEL/CentOS versions
  • From: Chandana De Silva
• Problems when filtering on icmpv6
  • From: Guido Winkelmann
• libvirt with lxc: internal error The 'cpuacct', 'devices' & 'memory' cgroups controllers must be mounted
  • From: unicell
• NWFilter and IPv6
  • From: Guido Winkelmann
• Re: help filtering spam
  • From: Dan Kegel
• help filtering spam
  • From: Joe Linoff
• No driver found during virt-install / kickstart
  • From: Joe Linoff
• Re: Failed to bind socket to '/var/run/libvirt/libvirt-sock': Permission denied
  • From: Eric Blake
• Re: [libvirt] can not create "qcow2" format volume by Java library.
  • From: Claudio Bley
• Failed to bind socket to '/var/run/libvirt/libvirt-sock': Permission denied
  • From: 何鑫
• virt-install kickstart local file
  • From: Joe Linoff
• Re: re-create disk image file
  • From: Joe Linoff
• Re: re-create disk image file
  • From: Eric Blake
• Re: re-create disk image file
  • From: Joe Linoff
• Re: re-create disk image file
  • From: Eric Blake
• Re: re-create disk image file
  • From: Joe Linoff
• Re: re-create disk image file
  • From: Eric Blake
• Re: re-create disk image file
  • From: Joe Linoff
• Re: is this mailing list active? i am seeing low activity and am receiving spam
  • From: Eric Blake
• Re: is this mailing list active? i am seeing low activity and am receiving spam
  • From: Joe Linoff
• Re: is this mailing list active? i am seeing low activity and am receiving spam
  • From: Eric Blake
• Re: is this mailing list active? i am seeing low activity and am receiving spam
  • From: Joe Linoff
• Re: re-create disk image file
  • From: Henrik Ahlgren
• Re: re-create disk image file
  • From: Joe Linoff
• is this mailing list active? i am seeing low activity and am receiving spam
  • From: Joe Linoff
• re-create disk image file
  • From: Joe Linoff
• CPU Mode= Host passthrough
  • From: Michael Beham
• virsh vol-create-as failing on NFS automount for chmod (dynamic_ownership = 0)
  • From: Joe Linoff
• Re: error: Unable to add port vnet1 to OVS bridge ovsbr: Operation not permitted
  • From: Radhika Niranjan
• Re: hotplug
  • From: Radhika Niranjan
• error: Unable to add port vnet1 to OVS bridge ovsbr: Operation not permitted
  • From: Radhika Niranjan
• Re: hotplug
  • From: Radhika Niranjan
• Re: error : virPidFileAcquirePath:345 : Failed to acquire pid file '/home/corey/.libvirt/libvirtd.pid': Resource temporarily unavailable
  • From: Eric Blake
• Re: error : virPidFileAcquirePath:345 : Failed to acquire pid file '/home/corey/.libvirt/libvirtd.pid': Resource temporarily unavailable
  • From: 何鑫
• Re: build error on CentOS 5
  • From: Ben Clay
• Re: build error on CentOS 5
  • From: Eric Blake
• build error on CentOS 5
  • From: Ben Clay
• numa topology within domain XML
  • From: Geert Geurts
• Re: error : virPidFileAcquirePath:345 : Failed to acquire pid file '/home/corey/.libvirt/libvirtd.pid': Resource temporarily unavailable
  • From: Gao Yongwei
• Re: libvirt-users Digest, Vol 34, Issue 35
  • From: Gao Yongwei
• Re: libvirt python api error
  • From: Gao Yongwei
• Re: SCSI/IDE Devices in Guest
  • From: Douglas Russell
• Re: error : virPidFileAcquirePath:345 : Failed to acquire pid file '/home/corey/.libvirt/libvirtd.pid': Resource temporarily unavailable
  • From: 何鑫
• Multicast with KVM NAT networking
  • From: james pedia
• Re: Attaching storage to a virtual machine
  • From: Eric Blake
• Re: error : virPidFileAcquirePath:345 : Failed to acquire pid file '/home/corey/.libvirt/libvirtd.pid': Resource temporarily unavailable
  • From: Daniel P. Berrange
• Re: error : virPidFileAcquirePath:345 : Failed to acquire pid file '/home/corey/.libvirt/libvirtd.pid': Resource temporarily unavailable
  • From: Eric Blake
• overriding shutdown for LXC
  • From: erkan yanar
• hotplug
  • From: Douglas Russell
• Re: Attaching storage to a virtual machine
  • From: Douglas Russell
• Re: error : virPidFileAcquirePath:345 : Failed to acquire pid file '/home/corey/.libvirt/libvirtd.pid': Resource temporarily unavailable
  • From: 何鑫
• Re: error : virPidFileAcquirePath:345 : Failed to acquire pid file '/home/corey/.libvirt/libvirtd.pid': Resource temporarily unavailable
  • From: Michal Privoznik
• error : virPidFileAcquirePath:345 : Failed to acquire pid file '/home/corey/.libvirt/libvirtd.pid': Resource temporarily unavailable
  • From: 何鑫
• Re: SCSI/IDE Devices in Guest
  • From: Eric Blake
• Re: Attaching storage to a virtual machine
  • From: Eric Blake
• Re: libvirt-users Digest, Vol 34, Issue 35
  • From: Chandana De Silva
• Re: [libvirt] can not create "qcow2" format volume by Java library.
  • From: Eric Blake
• Re: error: Cannot open network interface control socket
  • From: Eric Blake
• Re: Failed to connect socket to '/usr/local/libvirt/var/run/libvirt/libvirt-sock':
  • From: Eric Blake
• SCSI/IDE Devices in Guest
  • From: Douglas Russell
• Failed to connect socket to '/usr/local/libvirt/var/run/libvirt/libvirt-sock':
  • From: 何鑫
• Attaching storage to a virtual machine
  • From: Douglas Russell
• Re: virtual machine seems to run, but can't connect to it
  • From: Douglas Russell
• can not create "qcow2" format volume by Java library.
  • From: zhijun liu
• Can VMs on different machines communicate with each other without IP?
  • From: 张章
• libvirt python api error
  • From: 宣铭艺
• error: Cannot open network interface control socket
  • From: 何鑫
• Re: libvirt and cgroups/blkio
  • From: erkan yanar
• Re: libvirt and cgroups/blkio
  • From: Eric Blake
• Re: Re-sizing qcow2 images
  • From: Chandana De Silva
• Re-sizing qcow2 images
  • From: Chandana De Silva
• Re: libvirt and cgroups/blkio
  • From: erkan yanar
• virt-manager fails to connect to dbus
  • From: sean darcy
• libvirt and thin provisionned LVM
  • From: Daniel Berteaud
• Re: libvirt and cgroups/blkio
  • From: Eric Blake
• Re: virtual machine seems to run, but can't connect to it
  • From: Hristo Deshev
• Re: Re-sizing qcow2 images
  • From: Eric Blake
• virtual machine seems to run, but can't connect to it
  • From: Douglas Russell
• libvirt and cgroups/blkio
  • From: erkan yanar
• Health check
  • From: Ali Nikzad
• Re: Re-sizing qcow2 images
  • From: Hristo Deshev
• Re: Re-sizing qcow2 images
  • From: Rajesh Kumar Mallah
• Re: Re-sizing qcow2 images
  • From: Chandana De Silva
• Re: Re-sizing qcow2 images
  • From: Rajesh Kumar Mallah
• Re-sizing qcow2 images
  • From: Chandana De Silva
• Re: hypervisor driver not found
  • From: Eric Blake
• Re: hypervisor driver not found
  • From: p . venkatasrinivas
• virsh responds slowly
  • From: Chun-Hung Chen
• KVM raw on DRDB on LVM logical volume?
  • From: Whit Blauvelt
• Re: hypervisor driver not found
  • From: Eric Blake
• Please help: Libvirt event for disk change is not being registered by DomainEventRegisterAny()
  • From: Abhishek Srivastava
• Re: hypervisor driver not found
  • From: p . venkatasrinivas
• Re: Disk-only internal snapshot
  • From: Davide Guerri
• Re: Disk-only internal snapshot
  • From: Kashyap Chamarthy
• Re: Disk-only internal snapshot
  • From: Kashyap Chamarthy
• Re: Disk-only internal snapshot
  • From: Abbas
• Re: Disk-only internal snapshot
  • From: Eric Blake
• Re: Disk-only internal snapshot
  • From: Davide Guerri
• Re: Disk-only internal snapshot
  • From: Eric Blake
• Disk-only internal snapshot
  • From: Davide Guerri
• Re: cannot start domain with SR-IOV interface
  • From: Laine Stump
• Libvirt event for disk change is not being registered by DomainEventRegisterAny()
  • From: Abhishek Srivastava
• Failed to query file context on : No data available
  • From: =?gb18030?b?I6iAZXI=?=
• Re: Questions and a blockpull issue
  • From: Abbas
• Re: Unable to start guest
  • From: Doug Goldstein
• Unable to start guest
  • From: Jeremy Johnston
• Re: hypervisor driver not found
  • From: Eric Blake
• Re: using vbox driver hypervisor support
  • From: Eric Blake
• Re: Questions and a blockpull issue
  • From: Eric Blake
• hypervisor driver not found
  • From: p . venkatasrinivas
• using vbox driver hypervisor support
  • From: p . venkatasrinivas
• Re: start and stop a VMware VM using libvirt API
  • From: Ali Nikzad
• Re: start and stop a VMware VM using libvirt API
  • From: Abbas
• Re: start and stop a VMware VM using libvirt API
  • From: Abbas
• Re: start and stop a VMware VM using libvirt API
  • From: Matthias Bolte
• Re: start and stop a VMware VM using libvirt API
  • From: Ali Nikzad
• Re: start and stop a VMware VM using libvirt API
  • From: Ali Nikzad
• Re: start and stop a VMware VM using libvirt API
  • From: Abbas
• Get data of Physical Machine
  • From: Vinicius Gonçalves Braga
• Re: attach-interface not permanent?
  • From: Michal Privoznik
• attach-interface not permanent?
  • From: Dennis Jacobfeuerborn
• Re: start and stop a VMware VM using libvirt API
  • From: Matthias Bolte
• Re: Questions and a blockpull issue
  • From: Abbas
• Re: start and stop a VMware VM using libvirt API
  • From: Abbas
• Re: start and stop a VMware VM using libvirt API
  • From: Ali Nikzad
• Re: Questions and a blockpull issue
  • From: Abbas
• Re: Questions and a blockpull issue
  • From: Eric Blake
• Re: start and stop a VMware VM using libvirt API
  • From: Abbas
• start and stop a VMware VM using libvirt API
  • From: Ali Nikzad
• Re: Questions and a blockpull issue
  • From: Abbas
• Re: Questions and a blockpull issue
  • From: Eric Blake
• Re: Questions and a blockpull issue
  • From: Abbas
• Re: Questions and a blockpull issue
  • From: Eric Blake
• Re: error: internal error lxc state driver is not active
  • From: Osier Yang
• Questions and a blockpull issue
  • From: Abbas
• error: internal error lxc state driver is not active
  • From: =?gb18030?b?I6iAZXI=?=
• Questions and a blockpull issue
  • From: Abbas
• Re: cpuset not affecting real pid placement
  • From: Andrey Korolyov
• Re: Create and revert to snapshot fails silently after device update on running domain
  • From: Jasper Spit
• Re: Using libvirt to monitor virtual environment.
  • From: Eric Blake
• R: Using libvirt to monitor virtual environment.
  • From: robmail16@xxxxxxxxx
• Using libvirt to monitor virtual environment.
  • From: Vinicius Gonçalves Braga
• 0.10.x incorrectly reporting currentMemory size
  • From: Andrey Korolyov
• Re: Migrating a LV backed guest
  • From: Kashyap Chamarthy
• Re: Migrating a LV backed guest
  • From: Eric Blake
• cgroup blkio.weight working, but not for KVM guests
  • From: Ben Clay
• Re: Migrating fails with "Timed out during operation: cannot acquire state change lock"
  • From: Guido Winkelmann
• Re: Migrating fails with "Timed out during operation: cannot acquire state change lock"
  • From: Jiri Denemark
• Re: Migrating a LV backed guest
  • From: Corey Quinn
• cpuset not affecting real pid placement
  • From: Andrey Korolyov
• Migrating fails with "Timed out during operation: cannot acquire state change lock"
  • From: Guido Winkelmann
• Re: Migrating a LV backed guest
  • From: Eric Blake
• Re: [libvirt] Connection using Java
  • From: Claudio Bley
• Migrating a LV backed guest
  • From: Corey Quinn
• cannot start domain with SR-IOV interface
  • From: Radhika Niranjan
• LXC guest memory recycling under RHEL6
  • From: Rudy Godoy Guillén
• Re: What to configure for a guest with 2.2. kernel ...
  • From: Stefan G. Weichinger
• Re: Libvirt mpiexec networking issue
  • From: Shawn Furrow
• Libvirt mpiexec networking issue
  • From: Shawn Furrow
• libvirt java api create volume bug?
  • From: zhijun liu
• Re: Libvirt Error guest wont start
  • From: Shawn Furrow
• Re: Libvirt Error guest wont start
  • From: Martin Kletzander
• Re: Libvirt Error guest wont start
  • From: Shawn Furrow
• Re: Libvirt Error guest wont start
  • From: Kashyap Chamarthy
• Libvirt Error guest wont start
  • From: Shawn Furrow
• virsh start failed (Failed to query file context on ...)
  • From: Binknight
• Re: can not connect hypervisor using libvirt-0.9.8 on windows
  • From: Matthias Bolte
• Re: What to configure for a guest with 2.2. kernel ...
  • From: Stefan G. Weichinger
• Re: can not connect hypervisor using libvirt-0.9.8 on windows
  • From: xuanmao_001
• network setup
  • From: anita.sivakumar
• Re: What to configure for a guest with 2.2. kernel ...
  • From: Stefan G. Weichinger
• Re: What to configure for a guest with 2.2. kernel ...
  • From: Stefan G. Weichinger
• Re: What to configure for a guest with 2.2. kernel ...
  • From: Eric Blake
• What to configure for a guest with 2.2. kernel ...
  • From: Stefan G. Weichinger
• Re: can not connect hypervisor using libvirt-0.9.8 on windows
  • From: Matthias Bolte
• network problem
  • From: Evaggelos Balaskas
• Re: alias as volume names for multipath storrage pools
  • From: Michael Menge
• error: authentication failed: Authorization requires authentication but no agent is available
  • From: Yih Chuang
• Re: Create and revert to snapshot fails silently after device update on running domain
  • From: Eric Blake
• Re: can not connect hypervisor using libvirt-0.9.8 on windows
  • From: Eric Blake
• Re: alias as volume names for multipath storrage pools
  • From: Eric Blake
• Problems connecting with a remote VirtualBox server
  • From: john Sanabria
• Re: no callback on VIR_DOMAIN_EVENT_ID_BALLOON_CHANGE in 0.10.2
  • From: Ben Clay
• Re: no callback on VIR_DOMAIN_EVENT_ID_BALLOON_CHANGE in 0.10.2
  • From: Ben Clay
• Re: no callback on VIR_DOMAIN_EVENT_ID_BALLOON_CHANGE in 0.10.2
  • From: Eric Blake
• no callback on VIR_DOMAIN_EVENT_ID_BALLOON_CHANGE in 0.10.2
  • From: Ben Clay
• Re: IPv4 routed virtual networks
  • From: Hristo Deshev
• IPv4 routed virtual networks
  • From: Gene Czarcinski
• Re: [libvirt] Connection using Java
  • From: Felipe Oliveira Gutierrez
• Re: [libvirt] Connection using Java
  • From: Hristo Deshev
• libvirt Java to connect at the XEN
  • From: Felipe Oliveira Gutierrez
• Re: [libvirt] Connection using Java
  • From: Eric Blake
• Re: [libvirt] Connection using Java
  • From: Felipe Oliveira Gutierrez
• Re: [libvirt] Connection using Java
  • From: Eric Blake
• Connection using Java
  • From: Felipe Oliveira Gutierrez
• Re: Request to participate to the list
  • From: Eric Blake
• Request to participate to the list
  • From: Felipe Oliveira Gutierrez
• Re: High availability for guests
  • From: Renich Bon Ciric
• Re: High availability for guests
  • From: Renich Bon Ciric
• Re: High availability for guests
  • From: Andrey Korolyov
• can not connect hypervisor using libvirt-0.9.8 on windows
  • From: xuanmao_001
• High availability for guests
  • From: Renich Bon Ciric
• alias as volume names for multipath storrage pools
  • From: Michael Menge
• Re: Inconsistent iptables forwarding rules for virtual networks?
  • From: Marwan Tanager
• Re: Inconsistent iptables forwarding rules for virtual networks?
  • From: Alex Jia
• Create and revert to snapshot fails silently after device update on running domain
  • From: Jasper Spit
• Inconsistent iptables forwarding rules for virtual networks?
  • From: Marwan Tanager
• Re: minor swap issue ....
  • From: Eric Blake
• Re: minor swap issue ....
  • From: Kashyap Chamarthy
• Re: minor swap issue ....
  • From: William A. Mahaffey III
• Re: minor swap issue ....
  • From: Eric Blake
• minor swap issue ....
  • From: William A. Mahaffey III
• Xen Paravirtualized Guest and drive order
  • From: Cyril Peponnet
• Re: Quadratic function-like call delay
  • From: Doug Goldstein
• Re: Quadratic function-like call delay
  • From: Andrey Korolyov
• Re: Quadratic function-like call delay
  • From: Daniel P. Berrange
• Re: Quadratic function-like call delay
  • From: Daniel Veillard
• Re: Quadratic function-like call delay
  • From: Daniel P. Berrange
• Re: Quadratic function-like call delay
  • From: Daniel Veillard
• Quadratic function-like call delay
  • From: Andrey Korolyov
• VLANs with Open vSwitch in libvirt 0.10.1
  • From: Scott Lowe
• prefer_msi=on in xml file
  • From: klak2
• Re: sharing read-only LOCAL disks among KVM guests
  • From: Amos Shapira
• picking a NUMA cell for pinning using virsh freecell
  • From: Edoardo Comar
• Re: virsh list not working with xen 4
  • From: Mathias Gaunard
• Xen domains appear randomly
  • From: Mathias Gaunard
• Network inoperable with QEMU arm example image
  • From: Larry Brown
• Re: sharing read-only LOCAL disks among KVM guests
  • From: Henrik Ahlgren
• Re: sharing read-only LOCAL disks among KVM guests
  • From: Daniel P. Berrange
• Re: sharing read-only LOCAL disks among KVM guests
  • From: Amos Shapira
• Re: sharing read-only LOCAL disks among KVM guests
  • From: Daniel P. Berrange
• Re: sharing read-only LOCAL disks among KVM guests
  • From: Amos Shapira
• Re: sharing read-only LOCAL disks among KVM guests
  • From: Daniel P. Berrange
• sharing read-only LOCAL disks among KVM guests
  • From: Amos Shapira
• Re: Article about libvirt and audit subsystem
  • From: Daniel P. Berrange
• Re: Article about libvirt and audit subsystem
  • From: Marcelo Cerri
• Re: How to pass info to a guest?
  • From: Renich Bon Ciric
• Re: How to pass info to a guest?
  • From: Andrew Cathrow
• Re: How to migrate over TCP without certs
  • From: Renich Bon Ciric
• Re: How to migrate over TCP without certs
  • From: Eric Blake
• Re: How to pass info to a guest?
  • From: Eric Blake
• libvirt network without dns ?
  • From: Scott Moser
• Re: How to migrate over TCP without certs
  • From: Renich Bon Ciric
• How to pass info to a guest?
  • From: Renich Bon Ciric
• libvirt and lxc and puppet
  • From: erkan yanar
• Re: How to migrate over TCP without certs
  • From: Renich Bon Ciric
• Re: Article about libvirt and audit subsystem
  • From: Eric Blake
• Article about libvirt and audit subsystem
  • From: Marcelo Cerri
• Re: libvirt 0.10 and cephx
  • From: Josh Durgin
• start failure with lxc
  • From: Eric J Nelson
• Re: top output from kvm guest VM
  • From: Gao Yongwei
• top output from kvm guest VM
  • From: Harish Patil
• Re: virNodeGetCPUStats and virDomainGetCPUStats have same name in pyton binding as getCPUStats
  • From: Buggi, Harsha
• Re: nwfilter example for security
  • From: Gao Yongwei
• nwfilter example for security
  • From: Java
• libvirt 0.10 and cephx
  • From: Andrey Korolyov
• Network inoperable with QEMU arm example image
  • From: Larry Brown
• Re: virNodeGetCPUStats and virDomainGetCPUStats have same name in pyton binding as getCPUStats
  • From: Daniel Veillard
• Re: network comanline to xml
  • From: Frank Matthieß
• Re: virNodeGetCPUStats and virDomainGetCPUStats have same name in pyton binding as getCPUStats
  • From: Daniel P. Berrange
• Re: virNodeGetCPUStats and virDomainGetCPUStats have same name in pyton binding as getCPUStats
  • From: Daniel Veillard
• virNodeGetCPUStats and virDomainGetCPUStats have same name in pyton binding as getCPUStats
  • From: Buggi, Harsha
• Re: Failed to reboot VM via virsh
  • From: xuanmao_001
• Re: Failed to reboot VM via virsh
  • From: Eric Blake
• Failed to reboot VM via virsh
  • From: xuanmao_001
• network comanline to xml
  • From: basti
• network comanline to xml
  • From: basti
• Re: How to disable dnsmasq from starting automatically with libvirtd
  • From: Laine Stump
• Re: After a 'virsh blockpull', 'virsh snapshot-list --tree' o/p does not reflect reality
  • From: Kashyap Chamarthy
• Re: After a 'virsh blockpull', 'virsh snapshot-list --tree' o/p does not reflect reality
  • From: Eric Blake
• Re: How to migrate over TCP without certs
  • From: Daniel P. Berrange
• Re: How to migrate over TCP without certs
  • From: Martin Kletzander
• libvirtd on MacOS X
  • From: Waldemar Brodkorb
• Re: How to disable dnsmasq from starting automatically with libvirtd
  • From: Marwan Tanager
• After a 'virsh blockpull', 'virsh snapshot-list --tree' o/p does not reflect reality
  • From: Kashyap Chamarthy
• Re: How to migrate over TCP without certs
  • From: Daniel P. Berrange
• Re: How to disable dnsmasq from starting automatically with libvirtd
  • From: Osier Yang
• Re: How to disable dnsmasq from starting automatically with libvirtd
  • From: Marwan Tanager
• Re: How to disable dnsmasq from starting automatically with libvirtd
  • From: Osier Yang
• Re: How to disable dnsmasq from starting automatically with libvirtd
  • From: Marwan Tanager
• Re: How to disable dnsmasq from starting automatically with libvirtd
  • From: Osier Yang
• Re: How to disable dnsmasq from starting automatically with libvirtd
  • From: Marwan Tanager
• Re: How to disable dnsmasq from starting automatically with libvirtd
  • From: Osier Yang
• Re: how make the pool to be inactive?
  • From: Timon Wang
• how make the pool to be inactive?
  • From: zhijun liu
• How to disable dnsmasq from starting automatically with libvirtd
  • From: Marwan Tanager
• How to migrate over TCP without certs
  • From: Renich Bon Ciric
• Network inoperable with QEMU arm example image
  • From: Larry Brown
• Re: virtual networking - virbr0-nic interface
  • From: Shantanu Pavgi
• Re: problem starting virt-manager
  • From: Lentes, Bernd
• Re: [PATCH] docs: mention another iaas app built on libvirt
  • From: Eric Choi
• Re: [PATCH] docs: mention another iaas app built on libvirt
  • From: Osier Yang
• [PATCH] docs: mention another iaas app built on libvirt
  • From: Eric Blake
• Re: problem starting virt-manager
  • From: Lentes, Bernd
• issue with kvm host crashing
  • From: David M. Barlieb
• Re: problem starting virt-manager
  • From: Lentes, Bernd
• Re: Addition of Eucalyptus to IaaS section
  • From: Eric Choi
• Re: dumpxml and edit the vm xml are not match.
  • From: Timon Wang
• Re: Addition of Eucalyptus to IaaS section
  • From: Osier Yang
• Re: virtual networking - virbr0-nic interface
  • From: Michal Privoznik
• Re: problem starting virt-manager
  • From: Michal Privoznik
• Re: dumpxml and edit the vm xml are not match.
  • From: Michal Privoznik
• problem starting virt-manager
  • From: Lentes, Bernd
• dumpxml and edit the vm xml are not match.
  • From: Timon Wang
• virtual networking - virbr0-nic interface
  • From: Shantanu Pavgi
• Re: Reg: Libvirt API does not return, after qemu-kvm is hungup.
  • From: Eric Blake
• Re: How to properly test watchdog?
  • From: Russell Jones
• Reg: Libvirt API does not return, after qemu-kvm is hungup.
  • From: Alphonse Hansel Anthony
• Re: Kernel unresponsive after booting 700+ vm's on a single host
  • From: Eric Blake
• Kernel unresponsive after booting 700+ vm's on a single host
  • From: Alfred Bratterud
• Addition of Eucalyptus to IaaS section
  • From: Eric Choi
• Re: libvirt failed to respond after quite a few vnet bridges were created
  • From: Hristo Deshev
• libvirt failed to respond after quite a few vnet bridges were created
  • From: Yih Chuang
• Re: boot device
  • From: vivek hari
• Re: Live Block Migration with additional attached storage
  • From: Eric Blake
• Re: QEMU cmdline for default -smp reasonable (qemuBuildSmpArgs) ?
  • From: Jiri Denemark
• Re: boot device
  • From: Jiri Denemark
• Re: Live Block Migration with additional attached storage
  • From: Chun-Hung Chen
• defining directly to the wan/lan
  • From: gary artim
• problem defining ipaddress
  • From: gary artim
• How to properly test watchdog?
  • From: Russell Jones
• QEMU cmdline for default -smp reasonable (qemuBuildSmpArgs) ?
  • From: sanjay
• Re: boot device
  • From: vivek hari
• Re: boot device
  • From: Jiri Denemark
• Re: non-blocking virtConnectOpen
  • From: Timon Wang
• Fwd: non-blocking virtConnectOpen
  • From: lulin Fan
• boot device
  • From: vivek hari
• Re: non-blocking virtConnectOpen
  • From: Daniel P. Berrange
• Re: non-blocking virtConnectOpen
  • From: Timon Wang
• non-blocking virtConnectOpen
  • From: lulin Fan
• Re: virDomainMemoryPeek: bad behavior under workload
  • From: NoxDaFox
• Re: Libvirt daemon segfaults when run as root
  • From: Eric Blake
• Re: about open vswitch supporting？
  • From: yue wang
• error: Failed to start pool (already mounted)
  • From: Ragnar Skúlason
• Need help of virDomainInterfaceStats
  • From: 张章
• Re: virtual network bug?
  • From: Gene Czarcinski
• virtual network bug?
  • From: Gene Czarcinski
• Re: virDomainMemoryPeek: bad behavior under workload
  • From: NoxDaFox
• Re: virDomainMemoryPeek: bad behavior under workload
  • From: Daniel P. Berrange
• Re: virDomainMemoryPeek: bad behavior under workload
  • From: Daniel P. Berrange
• Fwd: vm pxe fail
  • From: Alex Jia
• virDomainMemoryPeek: bad behavior under workload
  • From: NoxDaFox
• whether before create a pool use type logical must create a vg or not?
  • From: zhijun liu
• Running VirtualBox headless
  • From: Dmitry Mikhin
• network settings for an isolated network
  • From: Christian Schmidt
• Re: Use virsh command domjobinfo but get nothing
  • From: Li, Chun Wen
• Re: Use virsh command domjobinfo but get nothing
  • From: Wen Congyang
• Use virsh command domjobinfo but get nothing
  • From: Li, Chun Wen
• Re: delete storage pool error
  • From: Alex Jia
• delete storage pool error
  • From: zhijun liu
• Re: virsh reboot problem
  • From: Peter Krempa
• Re: Why a max mem setting?
  • From: Peter Krempa
• Re: virsh reboot problem
  • From: Andreas Davour
• Re: virsh reboot problem
  • From: Gao Yongwei
• virsh reboot problem
  • From: Andreas Davour
• Why a max mem setting?
  • From: Andreas Davour
• Re: What's the api virConnectBaselineCPU used for?
  • From: Alex Jia
• What's the api virConnectBaselineCPU used for?
  • From: Timon Wang
• Re: question about using openAuth with Python
  • From: Martin Kletzander
• question about using openAuth with Python
  • From: lulin Fan
• Re: automatically detaching PCI host devices from guest for SRIOV usage.
  • From: Rajesh Kumar Mallah
• Re: automatically detaching PCI host devices from guest for SRIOV usage.
  • From: Alex Jia
• Re: automatically detaching PCI host devices from guest for SRIOV usage.
  • From: Rajesh Kumar Mallah
• Re: automatically detaching PCI host devices from guest for SRIOV usage.
  • From: Alex Jia
• Re: remote lxc via libvirt?
  • From: Daniel Veillard
• Re: automatically detaching PCI host devices from guest for SRIOV usage.
  • From: Rajesh Kumar Mallah
• remote lxc via libvirt?
  • From: Dan Kegel
• Understanding 802.1Qbh networking
  • From: Chris Picton
• Re: Does libvirt abstract each and any vm specific command?
  • From: Eric Blake
• Does libvirt abstract each and any vm specific command?
  • From: adrelanos
• Libvirt daemon segfaults when run as root
  • From: Shawn Furrow
• Re: Running libvirt from source on Ubuntu
  • From: Whit Blauvelt
• Re: Running libvirt from source on Ubuntu
  • From: Shawn Furrow
• Re: Running libvirt from source on Ubuntu
  • From: Whit Blauvelt
• Re: Running libvirt from source on Ubuntu
  • From: Shawn Furrow
• Re: Running libvirt from source on Ubuntu
  • From: Whit Blauvelt
• Re: Libvirt Seg Fault when compiling either 0.9.13 or 0.10.0-rc1
  • From: Shawn Furrow
• Re: vnc port of VM
  • From: Eric Blake
• vnc port of VM
  • From: 张章
• vnc port of VM
  • From: 张章
• vnc port of VM
  • From: 张章
• Re: automatically detaching PCI host devices from guest for SRIOV usage.
  • From: Rajesh Kumar Mallah
• Re: automatically detaching PCI host devices from guest for SRIOV usage.
  • From: Alex Jia
• Re: libvirt networking
  • From: Dale Amon
• Re: Libvirt Seg Fault when compiling either 0.9.13 or 0.10.0-rc1
  • From: Whit Blauvelt
• Re: Libvirt Seg Fault when compiling either 0.9.13 or 0.10.0-rc1
  • From: Shawn Furrow
• Re: Libvirt Seg Fault when compiling either 0.9.13 or 0.10.0-rc1
  • From: Shawn Furrow
• Re: Libvirt Seg Fault when compiling either 0.9.13 or 0.10.0-rc1
  • From: Daniel Veillard
• Re: Libvirt Seg Fault when compiling either 0.9.13 or 0.10.0-rc1
  • From: Shawn Furrow
• Re: Libvirt Seg Fault when compiling either 0.9.13 or 0.10.0-rc1
  • From: Whit Blauvelt
• Re: Libvirt Seg Fault when compiling either 0.9.13 or 0.10.0-rc1
  • From: Daniel Veillard
• Re: Libvirt Seg Fault when compiling either 0.9.13 or 0.10.0-rc1
  • From: Shawn Furrow
• Re: Libvirt Seg Fault when compiling either 0.9.13 or 0.10.0-rc1
  • From: Shawn Furrow
• Re: Libvirt Seg Fault when compiling either 0.9.13 or 0.10.0-rc1
  • From: Whit Blauvelt
• Re: Libvirt Seg Fault when compiling either 0.9.13 or 0.10.0-rc1
  • From: Eric Blake
• Libvirt Seg Fault when compiling either 0.9.13 or 0.10.0-rc1
  • From: Shawn Furrow
• Re: automatically detaching PCI host devices from guest for SRIOV usage.
  • From: Rajesh Kumar Mallah
• Re: automatically detaching PCI host devices from guest for SRIOV usage.
  • From: Alex Jia
• libvirt networking
  • From: Dale Amon
• libvir: Domain Config error : internal error incorrect root element
  • From: 何鑫
• virsh command vol-upload purpose question
  • From: Li, Chun Wen
• Re: What can cause "libvirtd dead but pid file exists."
  • From: Eric Blake
• Re: Finding cause when "virsh list" hangs
  • From: Whit Blauvelt
• Re: Finding cause when "virsh list" hangs
  • From: Eric Blake
• Re: disappeared VM in virsh
  • From: Eric Blake
• Re: Libvirt Qemu compatibility
  • From: Eric Blake
• IP over IB support.
  • From: Eric J Nelson
• Libvirt Qemu compatibility
  • From: Shawn Furrow
• Re: disappeared VM in virsh
  • From: Akendo
• capabilities mismatch
  • From: Sean Abbott
• Re: automatically detaching PCI host devices from guest for SRIOV usage.
  • From: Rajesh Kumar Mallah
• IVSHMEM support
  • From: Shawn Furrow
• Re: storage pool does not support volume creation
  • From: Daniel P. Berrange
• storage pool does not support volume creation
  • From: zhijun liu
• Re: libvirtd crashes after guest migration with attached console
  • From: Andrey Korolyov
• Re: libvirtd crashes after guest migration with attached console
  • From: Peter Krempa
• Using Libvirt Java Bindings on Windows 7 64bit
  • From: Frank Wilson
• Re: Failed to use virDomainDefineXML
  • From: Olivier Doucet
• Failed to use virDomainDefineXML
  • From: 何鑫
• Re: getCPUStats of a domain by a non-root user - libvirtError: Requested operation is not valid: cgroup CPUACCT controller is not mounted
  • From: Anton Beloglazov
• Re: automatically detaching PCI host devices from guest for SRIOV usage.
  • From: Rajesh Kumar Mallah
• Re: automatically detaching PCI host devices from guest for SRIOV usage.
  • From: Alex Jia
• Re: automatically detaching PCI host devices from guest for SRIOV usage.
  • From: Rajesh Kumar Mallah
• Failed to change the content of tag- <emulator>
  • From: 何鑫
• Re: automatically detaching PCI host devices from guest for SRIOV usage.
  • From: Alex Jia
• Re: Live Snapshot and Rebasing using blockpull
  • From: Andrew Martin
• automatically detaching PCI host devices from guest for SRIOV usage.
  • From: Rajesh Kumar Mallah
• Re: ANNOUNCE: Oz 0.9.0 Release
  • From: Justin Clift
• Re: ANNOUNCE: Oz 0.9.0 Release
  • From: Chris Lalancette
• ... and when "virsh" itself hangs
  • From: Whit Blauvelt
• Finding cause when "virsh list" hangs
  • From: Whit Blauvelt
• ANNOUNCE: Oz 0.9.0 Release
  • From: Chris Lalancette
• Re: getCPUStats of a domain by a non-root user - libvirtError: Requested operation is not valid: cgroup CPUACCT controller is not mounted
  • From: Anton Beloglazov
• Re: Live Snapshot and Rebasing using blockpull
  • From: Eric Blake
• Live Snapshot and Rebasing using blockpull
  • From: Andrew Martin
• Re: getCPUStats of a domain by a non-root user - libvirtError: Requested operation is not valid: cgroup CPUACCT controller is not mounted
  • From: Anton Beloglazov
• Re: getCPUStats of a domain by a non-root user - libvirtError: Requested operation is not valid: cgroup CPUACCT controller is not mounted
  • From: Olivier Doucet
• Re: Where does "cmd" initailize in qemu_command.c?
  • From: Eric Blake
• Re: Where does "cmd" initailize in qemu_command.c?
  • From: Eric Blake
• Where does "cmd" initailize in qemu_command.c?
  • From: He Xin
• Fwd: vm pxe fail
  • From: Alex Jia
• getCPUStats of a domain by a non-root user - libvirtError: Requested operation is not valid: cgroup CPUACCT controller is not mounted
  • From: Anton Beloglazov
• What can cause "libvirtd dead but pid file exists."
  • From: xuanmao_001
• Re: disappeared VM in virsh
  • From: Eric Blake
• disappeared VM in virsh
  • From: Akendo
• vm pxe fail
  • From: Andrew Holway
• error: virsh not could create bridge interface
  • From: Gao Yongwei
• What can cause "libvirtd dead but pid file exists."
  • From: xuanmao_001
• Re: Source of Qcow2 Image Corruption
  • From: Andrew Martin
• Source of Qcow2 Image Corruption
  • From: Andrew Martin
• Error: virNetSocketReadWire:904 : Cannot recv data: Input/output error
  • From: Adarsh Guler
• How to use ext transport?
  • From: Christian Schmidt
• Re: Which functions call qemu_driver API?
  • From: Eric Blake
• Which functions call qemu_driver API?
  • From: He Xin
• Re: Does Libvirt-0.8.8(windows) support URI like qemu+ssh on windows?
  • From: Eric Blake
• Does Libvirt-0.8.8(windows) support URI like qemu+ssh on windows?
  • From: xuanmao_001
• Re: quickest way to stop VM
  • From: Harish Patil
• Re: iptables: cannot port forward
  • From: Gao Yongwei
• Re: quickest way to stop VM
  • From: Joe Julian
• Re: quickest way to stop VM
  • From: Eric Blake
• quickest way to stop VM
  • From: Harish Patil
• Re: How much ways can libvirt connect to a qemu instance?
  • From: Eric Blake
• iptables: cannot port forward
  • From: Mauricio Tavares
• Does Libvirt-0.8.8(windows) support URI like qemu+ssh on windows?
  • From: xuanmao_001
• How much ways can libvirt connect to a qemu instance?
  • From: 何鑫
• How much ways can libvirt connect to a qemu instance?
  • From: 何鑫
• libvirtd crashes after guest migration with attached console
  • From: Andrey Korolyov
• Re: virsh dump
  • From: Harish Patil
• Re: virsh dump
  • From: Eric Blake
• virsh dump
  • From: Harish Patil
• virDomainMigrate() leads to SASL error
  • From: Olivier Doucet
• Re: error deploying a vm: Operation not permitted
  • From: Gao Yongwei
• Re: libvirtd may need to be started: Permission denied
  • From: Gao Yongwei
• Re: Remote Shutdown of Server 2008
  • From: Gao Yongwei
• Re: [libvirt] virDomainMemoryStats call
  • From: Eric Blake
• [libvirt] virDomainMemoryStats call
  • From: Parakkal, Navin S
• Re: error deploying a vm: Operation not permitted
  • From: Michael Rebstock
• libvirtd may need to be started: Permission denied
  • From: 何鑫
• Re: migration with non-root user
  • From: Eric Blake
• Re: migration with non-root user
  • From: Yih Chuang
• Re: How the libvirtd connect to qemud in source codes?
  • From: Eric Blake
• Re: migration with non-root user
  • From: Eric Blake
• migration with non-root user
  • From: Yih Chuang
• Channel with virtio problem
  • From: norazah aziz
• Bug in VNC QEMU?
  • From: Nikita A Menkovich
• How the libvirtd connect to qemud in source codes?
  • From: 何鑫
• Re: Remote Shutdown of Server 2008
  • From: Eric Blake
• Remote Shutdown of Server 2008
  • From: Gutierrez-Robles, Frank
• Authentication via SASL and LDAP?
  • From: Andrew Martin
• Re: using RBD with libvirt 0.9.13
  • From: Josh Durgin
• Re: using RBD with libvirt 0.9.13
  • From: Josh Durgin
• Re: using RBD with libvirt 0.9.13
  • From: Jeff Strunk
• using RBD with libvirt 0.9.13
  • From: Jeff Strunk
• Re: Opteron_G4 CPU under libvirt 0.9.12
  • From: Jiri Denemark
• Re: CPU Flags libvirt 0.9.12
  • From: Michael Beham
• Re: Determine state of the guest OS/kernel from host
  • From: Eric Blake
• Re: Determine state of the guest OS/kernel from host
  • From: Harish Patil
• Unable to load library 'virt'
  • From: zhijun liu
• Re: Determine state of the guest OS/kernel from host
  • From: Eric Blake
• Re: error deploying a vm: Operation not permitted
  • From: Eric Blake
• Re: Excluding RAW disk from snapshot
  • From: Eric Blake
• error deploying a vm: Operation not permitted
  • From: Michael Rebstock
• Opteron_G4 CPU under libvirt 0.9.12
  • From: Michael Beham
• Re: CPU Flags libvirt 0.9.12
  • From: Peter Krempa
• Re: Determine state of the guest OS/kernel from host
  • From: Harish Patil
• CPU Flags libvirt 0.9.12
  • From: Michael Beham
• Re: How to connect to local hpyervisor by libvirt?
  • From: vipul borikar
• How to connect to local hpyervisor by libvirt?
  • From: 何鑫
• Re: Determine state of the guest OS/kernel from host
  • From: Michal Privoznik
• Determine state of the guest OS/kernel from host
  • From: Harish Patil
• Re: Excluding RAW disk from snapshot
  • From: Trey Dockendorf
• Re: Excluding RAW disk from snapshot
  • From: Eric Blake
• Excluding RAW disk from snapshot
  • From: Trey Dockendorf
• Re: [Qemu-devel] Using virsh to load scripts for the guest machine
  • From: Mauricio Tavares
• Re: libvirt windows error
  • From: Matthias Bolte
• Re: libvirt windows error
  • From: Alex Jia
• libvirt windows error
  • From: zhijun liu
• Re: [Qemu-devel] Using virsh to load scripts for the guest machine
  • From: Eric Blake
• Re: [Qemu-devel] Using virsh to load scripts for the guest machine
  • From: Anthony Liguori
• libvirt: how to set PV-on-HVM drivers??
  • From: zcs
• Re: Using virsh to load scripts for the guest machine
  • From: Eric Blake
• Re: Using virsh to load scripts for the guest machine
  • From: Alex Jia
• Re: Using virsh to load scripts for the guest machine
  • From: Mauricio Tavares
• Re: Using virsh to load scripts for the guest machine
  • From: Eric Blake
• live migration causes guest system to crash when accessing the network
  • From: Sebastian J. Bronner
• mouse pointer not in sync after live migration
  • From: Stefan
• Re: libvirt-users Digest, Vol 31, Issue 39
  • From: Borden Rhodes
• Re: Can't NAT in KVM
  • From: Laine Stump
• Re: Can't NAT in KVM
  • From: Laine Stump
• Re: Can't NAT in KVM
  • From: Borden Rhodes
• Re: Can't NAT in KVM
  • From: vipul borikar
• Re: Can't NAT in KVM
  • From: Borden Rhodes
• Re: Can't NAT in KVM
  • From: Martin Kletzander
• Can't NAT in KVM
  • From: Borden Rhodes
• Re: How can I make sVirt work with LXC (libvirt-0.9.13)?
  • From: David Kang
• Re: libvirt shortcomings of virsh domxml-to-native and domxml-from-native
  • From: Dave Allan
• No /dev/tty device within LXC guest?
  • From: Yufang Zhang
• Re: libvirt shortcomings of virsh domxml-to-native and domxml-from-native
  • From: Matthias Bolte
• Re: VM dies with error regarding "virConnectNumOfInterfaces"
  • From: Helga Velroyen
• Re: virsh iface-list error
  • From: Laine Stump
• CPU-Capabilties for Nested Virtualization
  • From: Michael Beham
• libvirt shortcomings of virsh domxml-to-native and domxml-from-native
  • From: 张光鹏
• Re: virsh iface-list error
  • From: Eric Blake
• Re: virsh iface-list error
  • From: Ananth
• virsh iface-list error
  • From: Arun Sharma
• Re: VM dies with error regarding "virConnectNumOfInterfaces"
  • From: Laine Stump
• How can I make sVirt work with LXC (libvirt-0.9.13)?
  • From: David Kang
• Re: Setting CPU type for a vm
  • From: Mauricio Tavares
• Re: Setting CPU type for a vm
  • From: Mauricio Tavares
• help about libvirt console
  • From: lei yang
• libvirt shortcomings of virsh domxml-to-native and domxml-from-native
  • From: 张光鹏
• Re: INTERNAL ERROR:can not attach network interface for vm
  • From: Gao Yongwei
• Re: vm grub errors
  • From: ]4M3Z
• Re: INTERNAL ERROR:can not attach network interface for vm
  • From: Osier Yang
• Re: VM dies with error regarding "virConnectNumOfInterfaces"
  • From: Helga Velroyen
• INTERNAL ERROR:can not attach network interface for vm
  • From: Gao Yongwei
• Preferred CPU model not allowed by hypervisor
  • From: Jared
• vm grub errors
  • From: aprender-caminando
• Re: VM dies with error regarding "virConnectNumOfInterfaces"
  • From: Laine Stump
• VM dies with error regarding "virConnectNumOfInterfaces"
  • From: Helga Velroyen
• Re: duplicate domain ids!?
  • From: Eric Blake
• Re: Virsh Failing to Snapshot VMWare VM with Multiple Disks
  • From: Elizabeth Griffith
• duplicate domain ids!?
  • From: matt cowan
• Matching host and guest CPU
  • From: Alex
• Re: virsh define function question
  • From: Eric Blake
• Re: Setting CPU type for a vm
  • From: Daniel P. Berrange
• Re: Setting CPU type for a vm
  • From: Eric Blake
• Re: Questions related to the snapshot
  • From: Eric Blake
• Questions related to the snapshot
  • From: lin tan
• Re: save / restore RAM state - Problem
  • From: Evaggelos Balaskas
• save / restore RAM state - Problem
  • From: Evaggelos Balaskas
• virsh define function question
  • From: zhanggp
• Setting CPU type for a vm
  • From: Mauricio Tavares
• Re: Virsh Failing to Snapshot VMWare VM with Multiple Disks
  • From: Matthias Bolte
• Re: Virsh Failing to Snapshot VMWare VM with Multiple Disks
  • From: Matthias Bolte
• Re: Virsh Failing to Snapshot VMWare VM with Multiple Disks
  • From: Eric Blake
• Virsh Failing to Snapshot VMWare VM with Multiple Disks
  • From: Elizabeth Griffith
• Re: [virt-tools-list] I can't virt-clone into an existing LVM now (ERROR: clone onto existing storage volume is not supported:) - i could in previous lbvirt versions? (deployment scripts no longer work...)
  • From: Richard W.M. Jones
• Re: [libvirt] virDomainMemoryStats call
  • From: Osier Yang
• Re: [virt-tools-list] I can't virt-clone into an existing LVM now (ERROR: clone onto existing storage volume is not supported:) - i could in previous lbvirt versions? (deployment scripts no longer work...)
  • From: Morgan Cox
• Re: [libvirt] virDomainMemoryStats call
  • From: Navin P
• Re: [libvirt] virDomainMemoryStats call
  • From: Osier Yang
• Re: Attaching usb devices
  • From: Dale Amon
• virDomainMemoryStats call
  • From: Parakkal, Navin S
• Attaching usb devices
  • From: Mauricio Tavares
• Set IP for LXC-container through libvirt XML
  • From: Timothy Klim
• Re: Is there a version with libvirt supporting domain Autostart?
  • From: Eric Blake
• qemu-ga : windows 2008 64bit not working.
  • From: desi babu
• Is there a version with libvirt supporting domain Autostart?
  • From: xuanmao_001
• Using virsh to load scripts for the guest machine
  • From: Mauricio Tavares
• ubuntu 12.04 x64 virt-manager 0.9.1
  • From: Kobi Biton
• PCI passthrough troubles
  • From: mike allison
• Re: [virt-tools-list] I can't virt-clone into an existing LVM now (ERROR: clone onto existing storage volume is not supported:) - i could in previous lbvirt versions? (deployment scripts no longer work...)
  • From: Richard W.M. Jones
• Re: [ovs-discuss] OpenVswitch with KVM virtual machines
  • From: Ben Pfaff
• Re: [ovs-discuss] OpenVswitch with KVM virtual machines
  • From: Neha Jatav
• Re: Different SAS controller IDs
  • From: Anton Nikiforov
• Re: Different SAS controller IDs
  • From: Daniel P. Berrange
• Different SAS controller IDs
  • From: Anton Nikiforov
• Re: Starting a program inside VM through libvirt
  • From: Jørgen Nordmoen
• Re: Starting a program inside VM through libvirt
  • From: Osier Yang
• Re: PCI-Passthrough suddenly stopped working
  • From: Rouven Sacha
• Starting a program inside VM through libvirt
  • From: Jørgen Nordmoen
• Re: compiling docs from git
  • From: Osier Yang
• Re: PCI-Passthrough suddenly stopped working
  • From: Eric Blake
• PCI-Passthrough suddenly stopped working
  • From: Rouven Sacha
• storage volume's size change
  • From: Shantanu Pavgi
• compiling docs from git
  • From: Arindam Choudhury
• Re: I can't virt-clone into an existing LVM now (ERROR: clone onto existing storage volume is not supported:) - i could in previous lbvirt versions? (deployment scripts no longer work...)
  • From: Eric Blake
• I can't virt-clone into an existing LVM now (ERROR: clone onto existing storage volume is not supported:) - i could in previous lbvirt versions? (deployment scripts no longer work...)
  • From: Morgan Cox
• Re: About IBM PowerVM hypervisor support
  • From: Dennis Chen
• Re: live migration
  • From: hcyy
• Re: Live Block Migration with additional attached storage
  • From: Chun-Hung Chen
• Re: Live Block Migration with additional attached storage
  • From: Eric Blake
• Re: segfault on snapshot-list, 0.9.13
  • From: Eric Blake
• Re: About IBM PowerVM hypervisor support
  • From: Eduardo Otubo
• Live Block Migration with additional attached storage
  • From: Chun-Hung Chen
• Live Block Migration with additional attached storage
  • From: Chun-Hung Chen
• segfault on snapshot-list, 0.9.13
  • From: Andrey Korolyov
• Re: What is the procedure of libvirt internal when you run a domain.
  • From: Eric Blake
• Re: live migration
  • From: Eric Blake
• What is the procedure of libvirt internal when you run a domain.
  • From: xuanmao_001
• Re: Adding a second lv as vm drive: how to set the pci part
  • From: Eric Blake
• live migration
  • From: hcyy
• Adding a second lv as vm drive: how to set the pci part
  • From: Mauricio Tavares
• Re: Issue with getCPUStats and getMemoryStats
  • From: Osier Yang
• Issue with getCPUStats and getMemoryStats
  • From: Ananth
• Re: virsh iface-list () - function is not supported
  • From: Ananth
• Re: [ovs-discuss] OpenVswitch with KVM virtual machines
  • From: Ben Pfaff
• OpenVswitch with KVM virtual machines
  • From: Neha Jatav
• guest VM waiting for a symbol at serial console
  • From: Andrey Korolyov
• Re: virsh iface-list () - function is not supported
  • From: Osier Yang
• Re: virsh iface-list () - function is not supported
  • From: Ananth
• Re: [libvirt] numa query
  • From: Osier Yang
• Metadata accessible within guests
  • From: Renich Bon Ciric
• Re: Why the xen vm memory won't bloon
  • From: Tony Huang
• Why the xen vm memory won't bloon
  • From: Tony Huang
• CPU usage by libvirtd
  • From: Zhihua Che
• Re: About libvirtd daemon start issue
  • From: Dennis Chen
• numa query
  • From: kapil jain
• Re: About libvirtd daemon start issue
  • From: Eric Blake
• About libvirtd daemon start issue
  • From: Dennis Chen
• Re: Problem halting/restaring a lxc container from within
  • From: Daniel P. Berrange
• Re: About IBM PowerVM hypervisor support
  • From: Dennis Chen
• Problem halting/restaring a lxc container from within
  • From: david
• Re: About IBM PowerVM hypervisor support
  • From: Eduardo Otubo
• Re: About IBM PowerVM hypervisor support
  • From: Dennis Chen
• Re: virsh iface-list () - function is not supported
  • From: Osier Yang
• Re: About IBM PowerVM hypervisor support
  • From: Dennis Chen
• Re: About IBM PowerVM hypervisor support
  • From: Matthias Bolte
• Re: About IBM PowerVM hypervisor support
  • From: Eric Blake
• About IBM PowerVM hypervisor support
  • From: Dennis Chen
• Re: Reboot KVM guest failed via virsh!
  • From: Eric Blake
• using vmchannel between 6.x host/guests
  • From: Michael MacDonald
• Reboot KVM guest failed via virsh!
  • From: GaoYi
• idle connections (?)
  • From: Evaggelos Balaskas