----- Original Message ----- From: "Rajesh Kumar Mallah" <mallah@xxxxxxxxxxxxxx> To: "Alex Jia" <ajia@xxxxxxxxxx> Cc: libvirt-users@xxxxxxxxxx, "vikas pandey" <vikas_pandey@xxxxxxxxxxxxxx> Sent: Tuesday, August 21, 2012 9:13:33 PM Subject: Re: automatically detaching PCI host devices from guest for SRIOV usage. Dear Alex / List , I did some changes which i want you to know. I installed ixgbevf on the host and libvirt does attach and detach the VFs from the host and guests. But the connectivity issue is there. root@debian-squeeze:~# readlink -f /sys/bus/pci/devices/0000\:04\:10.0/driver /sys/bus/pci/drivers/ixgbevf root@debian-squeeze:~# /usr/local/libvirt/bin/virsh start new-installed Domain new-installed started root@debian-squeeze:~# readlink -f /sys/bus/pci/devices/0000\:04\:10.0/driver /sys/bus/pci/drivers/pci-stub root@debian-squeeze:~# ping 192.168.101.10 PING 192.168.101.10 (192.168.101.10) 56(84) bytes of data. >From 192.168.100.6 icmp_seq=1 Destination Host Unreachable >From 192.168.100.6 icmp_seq=2 Destination Host Unreachable >From 192.168.100.6 icmp_seq=3 Destination Host Unreachable >From 192.168.100.6 icmp_seq=4 Destination Host Unreachable >From 192.168.100.6 icmp_seq=5 Destination Host Unreachable >From 192.168.100.6 icmp_seq=6 Destination Host Unreachable >From 192.168.100.6 icmp_seq=7 Destination Host Unreachable >From 192.168.100.6 icmp_seq=8 Destination Host Unreachable >From 192.168.100.6 icmp_seq=9 Destination Host Unreachable 64 bytes from 192.168.101.10: icmp_req=10 ttl=64 time=812 ms 64 bytes from 192.168.101.10: icmp_req=11 ttl=64 time=0.351 ms 64 bytes from 192.168.101.10: icmp_req=12 ttl=64 time=0.293 ms 64 bytes from 192.168.101.10: icmp_req=13 ttl=64 time=0.364 ms ^C root@debian-squeeze:~# ssh 192.168.101.10 root@192.168.101.10's password: root@new-installed:~# halt The system is going down for system halt NOW!s/0) (Tue Aug 21 18:28:27 2012): root@new-installed:~# Connection to 192.168.101.10 closed by remote host. Connection to 192.168.101.10 closed. root@debian-squeeze:~# root@debian-squeeze:~# root@debian-squeeze:~# root@debian-squeeze:~# root@debian-squeeze:~# readlink -f /sys/bus/pci/devices/0000\:04\:10.0/driver /sys/bus/pci/drivers/ixgbevf root@debian-squeeze:~# /usr/local/libvirt/bin/virsh start new-installed Domain new-installed started root@debian-squeeze:~# readlink -f /sys/bus/pci/devices/0000\:04\:10.0/driver /sys/bus/pci/drivers/pci-stub root@debian-squeeze:~# ping 192.168.101.10 PING 192.168.101.10 (192.168.101.10) 56(84) bytes of data. >From 192.168.100.6 icmp_seq=1 Destination Host Unreachable >From 192.168.100.6 icmp_seq=2 Destination Host Unreachable >From 192.168.100.6 icmp_seq=5 Destination Host Unreachable >From 192.168.100.6 icmp_seq=6 Destination Host Unreachable >From 192.168.100.6 icmp_seq=7 Destination Host Unreachable >From 192.168.100.6 icmp_seq=8 Destination Host Unreachable ^C Never came! Could you attach your libvirtd.log? which's version your libvirt? in addition, if your guest has a desktop, please login and check if the network configuration exists issues. Thanks, Alex Please suggest if there is any way out. Relevant kernel logs: Aug 21 18:28:34 debian-squeeze kernel: [ 290.068511] ixgbevf 0000:04:10.0: enabling device (0000 -> 0002) Aug 21 18:28:34 debian-squeeze kernel: [ 290.069216] ixgbevf 0000:04:10.0: enabling bus mastering Aug 21 18:28:34 debian-squeeze kernel: [ 290.082458] ixgbevf 0000:04:10.0: irq 127 for MSI/MSI-X Aug 21 18:28:34 debian-squeeze kernel: [ 290.082482] ixgbevf 0000:04:10.0: irq 128 for MSI/MSI-X Aug 21 18:28:34 debian-squeeze kernel: [ 290.082503] ixgbevf 0000:04:10.0: irq 129 for MSI/MSI-X Aug 21 18:28:34 debian-squeeze kernel: [ 290.141706] ixgbe 0000:04:00.0: eth0: Set MAC msg received from VF 0 Aug 21 18:28:34 debian-squeeze kernel: [ 290.142548] ixgbe 0000:04:00.0: eth0: Set LPE msg received from vf 0 Aug 21 18:28:34 debian-squeeze kernel: [ 290.150487] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready Aug 21 18:28:34 debian-squeeze kernel: [ 290.153637] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready Aug 21 18:28:45 debian-squeeze ntpdate[40135]: step time server 202.190.183.188 offset -0.004582 sec Aug 21 18:28:46 debian-squeeze snmpd[39480]: IfIndex of an interface changed. Aug 21 18:29:39 debian-squeeze kernel: [ 355.486987] pci-stub 0000:04:10.0: claimed by stub Aug 21 18:29:39 debian-squeeze kernel: [ 355.826741] pci-stub 0000:04:10.0: enabling device (0000 -> 0002) Aug 21 18:29:40 debian-squeeze kernel: [ 356.484437] assign device 0:4:10.0 Aug 21 18:29:47 debian-squeeze kernel: [ 363.296117] kvm: 40206: cpu0 unhandled rdmsr: 0xc0010001 Aug 21 18:29:55 debian-squeeze kernel: [ 371.643998] ixgbe 0000:04:00.0: eth0: Set MAC msg received from VF 0 Aug 21 18:29:55 debian-squeeze kernel: [ 371.644661] ixgbe 0000:04:00.0: eth0: Set LPE msg received from vf 0 Aug 21 18:29:55 debian-squeeze kernel: [ 371.663095] pci-stub 0000:04:10.0: irq 127 for MSI/MSI-X Aug 21 18:29:55 debian-squeeze kernel: [ 371.694983] pci-stub 0000:04:10.0: irq 127 for MSI/MSI-X Aug 21 18:29:55 debian-squeeze kernel: [ 371.695009] pci-stub 0000:04:10.0: irq 128 for MSI/MSI-X Aug 21 18:29:55 debian-squeeze kernel: [ 371.758805] pci-stub 0000:04:10.0: irq 127 for MSI/MSI-X Aug 21 18:29:55 debian-squeeze kernel: [ 371.758833] pci-stub 0000:04:10.0: irq 128 for MSI/MSI-X Aug 21 18:29:55 debian-squeeze kernel: [ 371.758856] pci-stub 0000:04:10.0: irq 129 for MSI/MSI-X Regards, Rajesh Kumar Mallah Tel. 91-11-46710500 (Ext:303) Cell +919811255597 Website: http://www.tradeindia.com/ \|/ \|/ \|/ stop printing \|/ \|/ \|/ | | | start planting | | | ----- "Rajesh Kumar Mallah" <mallah@xxxxxxxxxxxxxx> wrote: | From: "Rajesh Kumar Mallah" <mallah@xxxxxxxxxxxxxx> | To: "Alex Jia" <ajia@xxxxxxxxxx> | Cc: libvirt-users@xxxxxxxxxx, "vikas pandey" <vikas_pandey@xxxxxxxxxxxxxx> | Sent: Tuesday, August 21, 2012 11:00:24 AM | Subject: Re: automatically detaching PCI host devices from guest for SRIOV usage. | | | Dear Alex , | | Thanks Once again for responding. I tried to replicate your steps. in our case readlink always reveals that the pci device is being | handled by the pci-stub driver (as in our case ixgbevf is absent in the host) | | Below is an annotaded sequence of events. | | Check status : # readlink -f /sys/bus/pci/devices/0000\:04\:10.0/driver /sys/bus/pci/drivers/pci-stub | | Content of the nic.xml: | root@debian-squeeze:/usr/local/libvirt/etc/libvirt/qemu# cat /root/nic.xml <hostdev mode='subsystem' type='pci' managed='yes'> <source> <address domain='0x0000' bus='0x04' slot='0x10' function='0x0'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </hostdev> # readlink -f /sys/bus/pci/devices/0000\:04\:10.0/driver /sys/bus/pci/drivers/pci-stub | | corrent connectivity is OK | # ping 192.168.101.10 PING 192.168.101.10 (192.168.101.10) 56(84) bytes of data. 64 bytes from 192.168.101.10: icmp_req=1 ttl=64 time=0.491 ms 64 bytes from 192.168.101.10: icmp_req=2 ttl=64 time=0.384 ms 64 bytes from 192.168.101.10: icmp_req=3 ttl=64 time=0.310 ms ^C --- 192.168.101.10 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1998ms rtt min/avg/max/mdev = 0.310/0.395/0.491/0.074 ms # readlink -f /sys/bus/pci/devices/0000\:04\:10.0/driver /sys/bus/pci/drivers/pci-stub | | Detach and reattach and check connectivity in running guest. | note: the guest has pci hotplug support , the ethernet interfaces | are configured to allow hotplug and IP is statically assigned. | # virsh detach-device new-installed /root/nic.xml Device detached successfully # readlink -f /sys/bus/pci/devices/0000\:04\:10.0/driver /sys/bus/pci/drivers/pci-stub root@debian-squeeze:/usr/local/libvirt/etc/libvirt/qemu# ping 192.168.101.10 PING 192.168.101.10 (192.168.101.10) 56(84) bytes of data. >From 192.168.100.6 icmp_seq=9 Destination Host Unreachable >From 192.168.100.6 icmp_seq=10 Destination Host Unreachable >From 192.168.100.6 icmp_seq=11 Destination Host Unreachable ^C --- 192.168.101.10 ping statistics --- 14 packets transmitted, 0 received, +3 errors, 100% packet loss, time 13096ms pipe 3 # virsh attach-device new-installed /root/nic.xml Device attached successfully # ping 192.168.101.10 PING 192.168.101.10 (192.168.101.10) 56(84) bytes of data. 64 bytes from 192.168.101.10: icmp_req=1 ttl=64 time=0.507 ms 64 bytes from 192.168.101.10: icmp_req=2 ttl=64 time=0.388 ms 64 bytes from 192.168.101.10: icmp_req=3 ttl=64 time=0.314 ms 64 bytes from 192.168.101.10: icmp_req=4 ttl=64 time=0.315 ms 64 bytes from 192.168.101.10: icmp_req=5 ttl=64 time=0.335 ms ^C --- 192.168.101.10 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 3998ms rtt min/avg/max/mdev = 0.314/0.371/0.507/0.076 ms # readlink -f /sys/bus/pci/devices/0000\:04\:10.0/driver /sys/bus/pci/drivers/pci-stub | Above proves that detach-attach cycle was successful. | # virsh detach-device new-installed /root/nic.xml Device detached successfully | | Please note that guest is being shutdown with nic detached. | | # virsh shutdown new-installed Domain new-installed is being shutdown | Guest being started again : | | # virsh start new-installed Domain new-installed started # ping 192.168.101.10 PING 192.168.101.10 (192.168.101.10) 56(84) bytes of data. 64 bytes from 192.168.101.10: icmp_req=1 ttl=64 time=0.583 ms 64 bytes from 192.168.101.10: icmp_req=2 ttl=64 time=0.402 ms 64 bytes from 192.168.101.10: icmp_req=3 ttl=64 time=0.308 ms 64 bytes from 192.168.101.10: icmp_req=4 ttl=64 time=0.316 ms 64 bytes from 192.168.101.10: icmp_req=5 ttl=64 time=0.318 ms 64 bytes from 192.168.101.10: icmp_req=6 ttl=64 time=0.247 ms ^C --- 192.168.101.10 ping statistics --- 6 packets transmitted, 6 received, 0% packet loss, time 4997ms rtt min/avg/max/mdev = 0.247/0.362/0.583/0.109 ms | Please note on starting the guest the PCI device came up | and connectivity was established. The device was also defined | inside the guest XML. | | | Now shutting down the Guest without detaching. | | # virsh shutdown new-installed Domain new-installed is being shutdown # virsh start new-installed Domain new-installed started | | # ping 192.168.101.10 PING 192.168.101.10 (192.168.101.10) 56(84) bytes of data. >From 192.168.100.6 icmp_seq=9 Destination Host Unreachable >From 192.168.100.6 icmp_seq=10 Destination Host Unreachable >From 192.168.100.6 icmp_seq=11 Destination Host Unreachable ^C --- 192.168.101.10 ping statistics --- 14 packets transmitted, 0 received, +3 errors, 100% packet loss, time 13095ms pipe 3 CONNECTION IS LOST | | We are using latest libvirtd (0.9.13) , lastest ixgbe/ixgbevf (from sf) , lastest stable kernel (3.5.1) | | Regards, | Rajesh Kumar Mallah | Tel. 91-11-46710500 (Ext:303) | Cell +919811255597 | Website: http://www.tradeindia.com/ | \|/ \|/ \|/ stop printing \|/ \|/ \|/ | | | | start planting | | | | | | ----- "Alex Jia" <ajia@xxxxxxxxxx> wrote: | | From: "Alex Jia" <ajia@xxxxxxxxxx> | | To: "Rajesh Kumar Mallah" <mallah@xxxxxxxxxxxxxx> | | Cc: libvirt-users@xxxxxxxxxx | | Sent: Tuesday, August 21, 2012 9:34:24 AM | | Subject: Re: automatically detaching PCI host devices from guest for SRIOV usage. | | | | On 08/21/2012 11:22 AM, Rajesh Kumar Mallah wrote: | | | | Dear Alex / List , | | | | Thanks for the response. | | | | The problem is regarding detaching from the guest not host. | | | | I see, if you attach a PCI device into guest with 'managed' mode(managed='yes') then the device is automatically detached from guest and returned to host after guest exiting, for example. | | | | # lspci | grep Eth | | 00:19.0 Ethernet controller: Intel Corporation 82566DM-2 Gigabit Network Connection (rev 02) | | | | # readlink /sys/bus/pci/devices/0000\:00\:19.0/driver/ -f | | /sys/bus/pci/drivers/e1000e | | | | # virsh start foo | | Domain foo started | | | | # ping -c 3 xx.xx.xx.xx | | PING xx.xx.xx.xx (xx.xx.xx.xx) 56(84) bytes of data. | | 64 bytes from nx-in-f160.1e100.net (xx.xx.xx.xx): icmp_seq=1 ttl=49 time=87.8 ms | | 64 bytes from nx-in-f160.1e100.net (xx.xx.xx.xx): icmp_seq=2 ttl=49 time=85.2 ms | | 64 bytes from nx-in-f160.1e100.net (xx.xx.xx.xx): icmp_seq=3 ttl=49 time=91.8 ms | | --- xx.xx.xx.xx ping statistics --- | | 3 packets transmitted, 3 received, 0% packet loss, time 2093ms | | rtt min/avg/max/mdev = 85.240/88.327/91.881/2.731 ms | | | | # cat hostdev.xml | | <hostdev mode='subsystem' type='pci' managed='yes'> | | <source> | | <address domain='0x0000' bus='0x00' slot='0x19' function='0x0'/> | | </source> | | </hostdev> | | | | # virsh attach-device foo hostdev.xml | | Device attached successfully | | | | # readlink /sys/bus/pci/devices/0000\:00\:19.0/driver/ -f | | /sys/bus/pci/drivers/pci-stub | | | | # ping -c 3 xx.xx.xx.xx | | connect: Network is unreachable | | | | # virsh destroy foo | | Domain foo destroyed | | | | # readlink /sys/bus/pci/devices/0000\:00\:19.0/driver/ -f | | /sys/bus/pci/drivers/e1000e | | | | # ping -c 3 xx.xx.xx.xx | | PING xx.xx.xx.xx (xx.xx.xx.xx) 56(84) bytes of data. | | 64 bytes from xx.xx.xx.xx: icmp_seq=1 ttl=49 time=79.7 ms | | 64 bytes from xx.xx.xx.xx: icmp_seq=2 ttl=49 time=83.2 ms | | 64 bytes from xx.xx.xx.xx: icmp_seq=3 ttl=49 time=84.5 ms | | | | --- xx.xx.xx.xx ping statistics --- | | 3 packets transmitted, 3 received, 0% packet loss, time 2087ms | | rtt min/avg/max/mdev = 79.714/82.480/84.513/2.040 ms | | | | Notes, need to wait for local network recovery again then check network connectivity. | | | | If your network still is disconnect, it may be a bug IMHO, please show your libvirt | | and qemu-kvm version, or my example is not what you want, please let me know. | | | | Thanks, | | Alex | | | | | | In our case since ixgbevf driver is NOT present in the host hence the virtual | | interfaces never really attach themselves to the host. | | | | Regards, | | Rajesh Kumar Mallah | | Tel. 91-11-46710500 (Ext:303) | | Cell +919811255597 | | Website: http://www.tradeindia.com/ | | \|/ \|/ \|/ stop printing \|/ \|/ \|/ | | | | | start planting | | | | | | | | | ----- "Alex Jia" <ajia@xxxxxxxxxx> wrote: | | | From: "Alex Jia" <ajia@xxxxxxxxxx> | | | To: "Rajesh Kumar Mallah" <mallah@xxxxxxxxxxxxxx> | | | Cc: libvirt-users@xxxxxxxxxx | | | Sent: Tuesday, August 21, 2012 8:31:21 AM | | | Subject: Re: automatically detaching PCI host devices from guest for SRIOV usage. | | | | | | On 08/20/2012 08:34 PM, Rajesh Kumar Mallah wrote: Dear List , We are using intel 82599EB based SRIOV capable 10GbE cards on the host machine.The VFs are being assigned to the guest in pass through mode and are providing the network connectivity as expected. However when we shutdown the guest the connectivity does not comes back via the VFs on the guest in next boot unless the VFs are detached from the *guest* *before* initiating a shutdown of the guests. Dear Rajesh, | | | | | | Please see the following comments. | | | | | | ( the detach is explicitly done via virsh command /usr/local/libvirt/bin/virsh detach-device guest01 ~/nic.xml nic.xml contained <hostdev mode='subsystem' type='pci' managed='yes'> <source> <address domain='0x0000' bus='0x04' slot='0x10' function='0x0'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </hostdev> ) The question is anyone else facing similar problem and if so what solution was used? Secondly , is there anyway to automate the detaching of the VFs from the guest when the guest is put in the shutdown sequence ? (or for that matter destroyed). | | | When managed is "yes" for a PCI device, it is automatically detached from the host before being passed on to the guest, and automatically reattached to the host after the guest exits such as shutdown a guest. | | | | | | Regards, | | | Alex | | | | | | Regards, Rajesh Kumar Mallah Tel. 91-11-46710500 (Ext:303) Cell +919811255597 Website: http://www.tradeindia.com/ \|/ \|/ \|/ stop printing \|/ \|/ \|/ | | | start planting | | | _______________________________________________ libvirt-users mailing list libvirt-users@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/libvirt-users | | | | | _______________________________________________ libvirt-users mailing list libvirt-users@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/libvirt-users
