Linux for MIPS

• Thread Index

• new bug on 2.6.24-rc6
  • From: Giuseppe Sacco <giuseppe@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [BUG][PATCH] fix broken software reset for Malta board
  • From: Dmitri Vorobiev <dmitri.vorobiev@xxxxxxxxx>
• [PATCH] Add GPIO system button to MTX-1
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxxx>
• Re: [PATCH] Wrong CONFIG option prevents setup of DMA zone.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] SNI_RM: collected changes
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [MIPS] 64-bit Sibyte kernels need DMA32.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: Arch/mips/kernel/vpe.c
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: MIPS 4KEc with 2.6.15
  • From: David Daney <ddaney@xxxxxxxxxx>
• Re: [MIPS] 64-bit Sibyte kernels need DMA32.
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: Toshiba JMR 3927 working setup?
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [MIPS] Fix modpost warning in raw binary builds.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: MIPS 4KEc with 2.6.15
  • From: Jorgen Lundman <lundman@xxxxxxxxxxx>
• Re: Toshiba JMR 3927 working setup?
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: MIPS 4KEc with 2.6.15
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] METH: fix MAC address handling
  • From: David Miller <davem@xxxxxxxxxxxxx>
• MIPS 4KEc with 2.6.15
  • From: Jorgen Lundman <lundman@xxxxxxxxxxx>
• Re: [PATCH] Fix IP32 breakage
  • From: Giuseppe Sacco <giuseppe@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Fix IP32 breakage
  • From: Martin Michlmayr <tbm@xxxxxxxxxx>
• Re: [PATCH] METH: fix MAC address handling
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• Re: [PATCH] METH: fix MAC address handling
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH] METH: fix MAC address handling
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• Re: Arch/mips/kernel/vpe.c
  • From: Thiemo Seufer <ths@xxxxxxxxxxxx>
• Re: [MIPS] Fix modpost warning in raw binary builds.
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: Toshiba JMR 3927 working setup?
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: Toshiba JMR 3927 working setup?
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: Toshiba JMR 3927 working setup?
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH] Assume newer R4000/R4400 don't have the mfc0 count bug
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] Fix IP32 breakage
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Arch/mips/kernel/vpe.c
  • From: <KokHow.Teh@xxxxxxxxxxxx>
• [PATCH] Fix IP32 breakage
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• [PATCH] Assume newer R4000/R4400 don't have the mfc0 count bug
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• [PATCH] SNI_RM: collected changes
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• Re: Toshiba JMR 3927 working setup?
  • From: Gregor Waltz <gregor.waltz@xxxxxxxxxxx>
• Re: Toshiba JMR 3927 working setup?
  • From: Gregor Waltz <gregor.waltz@xxxxxxxxxxx>
• Re: Toshiba JMR 3927 working setup?
  • From: Thiemo Seufer <ths@xxxxxxxxxxxx>
• Re: Toshiba JMR 3927 working setup?
  • From: Florian Lohoff <flo@xxxxxxxxxx>
• Re: Toshiba JMR 3927 working setup?
  • From: Gregor Waltz <gregor.waltz@xxxxxxxxxxx>
• RE: BUS error while returning from read() in /dev/oprofile/buffer
  • From: "Anirban Sinha" <ASinha@xxxxxxxxxxxxxxxxx>
• Re: Toshiba JMR 3927 working setup?
  • From: Thiemo Seufer <ths@xxxxxxxxxxxx>
• Toshiba JMR 3927 working setup?
  • From: Gregor Waltz <gregor.waltz@xxxxxxxxxxx>
• Re: BUG: BUS error while returning from read() in /dev/oprofile/buffer
  • From: David Daney <ddaney@xxxxxxxxxx>
• BUG: BUS error while returning from read() in /dev/oprofile/buffer
  • From: "Anirban Sinha" <ASinha@xxxxxxxxxxxxxxxxx>
• Re: 2.6.24-rc6 ssb build error
  • From: "Sunil Amitkumar Janki" <devel.sjanki@xxxxxxxxx>
• 2.6.24-rc6 ssb build error
  • From: "Sunil Amitkumar Janki" <devel.sjanki@xxxxxxxxx>
• Re: (Try #3) [Patch 2/8] MIPS: Remove 'TOPDIR' from Makefiles
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• (Try #3) [Patch 2/8] MIPS: Remove 'TOPDIR' from Makefiles
  • From: WANG Cong <xiyou.wangcong@xxxxxxxxx>
• Re: [Patch 2/8] MIPS: Remove 'TOPDIR' from Makefiles
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [Patch 2/8] MIPS: Remove 'TOPDIR' from Makefiles
  • From: Andreas Schwab <schwab@xxxxxxx>
• (Try #2) [Patch 2/8] MIPS: Remove 'TOPDIR' from Makefiles
  • From: WANG Cong <xiyou.wangcong@xxxxxxxxx>
• Re: [Patch 2/8] MIPS: Remove 'TOPDIR' from Makefiles
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [Patch 2/8] MIPS: Remove 'TOPDIR' from Makefiles
  • From: WANG Cong <xiyou.wangcong@xxxxxxxxx>
• [PATCH] Wrong CONFIG option prevents setup of DMA zone.
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• Re: [directfb-users] Fill rectangle is not filling the screen with the COLOR(ALways filling the screen with Black color)
  • From: "Asho Yeh" <ashoyeh@xxxxxxxxx>
• [PATCH][MIPS][1/6]: AR7: core
  • From: Matteo Croce <technoboy85@xxxxxxxxx>
• Re: [PATCH][MIPS][5/6]: AR7: serial hack
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• is CONFIG_CPU_MIPS32_R2 workable for linux-2.6.14?
  • From: zhuzhenhua <zzh.hust@xxxxxxxxx>
• [PATCH][MIPS][6/6]: AR7 leds
  • From: Matteo Croce <technoboy85@xxxxxxxxx>
• [PATCH][MIPS][5/6]: AR7: serial hack
  • From: Matteo Croce <technoboy85@xxxxxxxxx>
• [PATCH][MIPS][4/6]: AR7 refresh
  • From: Matteo Croce <technoboy85@xxxxxxxxx>
• [PATCH][MIPS][3/6]: AR7: VLYNQ bus
  • From: Matteo Croce <technoboy85@xxxxxxxxx>
• [PATCH][MIPS][2/6]: AR7 mtd partition map
  • From: Matteo Croce <technoboy85@xxxxxxxxx>
• [PATCH][MIPS][0/6]: AR7 refresh
  • From: Matteo Croce <technoboy85@xxxxxxxxx>
• Re: [MIPS] 64-bit Sibyte kernels need DMA32.
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: MC Bus Error / tcp_ack_saw_tstamp Was: IP28 Installation Success report
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• Re: MC Bus Error / tcp_ack_saw_tstamp Was: IP28 Installation Success report
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] Alchemy: fix modpost warning
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• MC Bus Error / tcp_ack_saw_tstamp Was: IP28 Installation Success report
  • From: Florian Lohoff <flo@xxxxxxxxxx>
• RE: question about oprofile support
  • From: "Anirban Sinha" <ASinha@xxxxxxxxxxxxxxxxx>
• question about oprofile support
  • From: "Anirban Sinha" <ASinha@xxxxxxxxxxxxxxxxx>
• admulator: a simulator of adm5120
  • From: "Zhou YaJin" <zyj001et@xxxxxxxxx>
• [PATCH] Alchemy: fix modpost warning
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [MIPS] MEM_SDREFCFG is not defined for Alchemy DB1550 (compile fail)
  • From: "Alon Bar-Lev" <alon.barlev@xxxxxxxxx>
• Re: [MIPS] MEM_SDREFCFG is not defined for Alchemy DB1550 (compile fail)
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [MIPS] MEM_SDREFCFG is not defined for Alchemy DB1550 (compile fail)
  • From: "Alon Bar-Lev" <alon.barlev@xxxxxxxxx>
• Re: [MIPS] MEM_SDREFCFG is not defined for Alchemy DB1550 (compile fail)
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [MIPS] MEM_SDREFCFG is not defined for Alchemy DB1550 (compile fail)
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [UPDATED PATCH] IP28 support
  • From: post@xxxxxxxx
• IP28 Installation Success report Was: [UPDATED PATCH] IP28 support
  • From: Florian Lohoff <flo@xxxxxxxxxx>
• Re: [MIPS] MEM_SDREFCFG is not defined for Alchemy DB1550 (compile fail)
  • From: "Alon Bar-Lev" <alon.barlev@xxxxxxxxx>
• [MIPS] MEM_SDREFCFG is not defined for Alchemy DB1550 (compile fail)
  • From: "Alon Bar-Lev" <alon.barlev@xxxxxxxxx>
• Re: [UPDATED PATCH] IP28 support
  • From: Richard Sandiford <rsandifo@xxxxxxxxxxxxx>
• Re: [UPDATED PATCH] IP28 support
  • From: peter fuerst <post@xxxxxxxx>
• Re: [PATCH] SC26XX: New serial driver for SC2681 uarts
  • From: "Pekka Enberg" <penberg@xxxxxxxxxxxxxx>
• Re: [PATCH] SC26XX: New serial driver for SC2681 uarts
  • From: Andy Whitcroft <apw@xxxxxxxxxxxx>
• Re: [PATCH][MIPS] fix user_cpus_allowed assignment
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [directfb-dev] Error in running gtk example on cross compiled GTK with DirectFB on MIPS board
  • From: "Mike Emmel" <mike.emmel@xxxxxxxxx>
• Fill rectangle is not filling the screen with the COLOR(ALways filling the screen with Black color)
  • From: kaka <share.kt@xxxxxxxxx>
• Re: [directfb-dev] Error in running gtk example on cross compiled GTK with DirectFB on MIPS board
  • From: kaka <share.kt@xxxxxxxxx>
• Re: [MIPS] Build an embedded initramfs into mips kernel
  • From: "Alon Bar-Lev" <alon.barlev@xxxxxxxxx>
• Re: [UPDATED PATCH] SGISEEQ: use cached memory access to make driver work on IP28
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [MIPS] Build an embedded initramfs into mips kernel
  • From: "Alex Gonzalez" <alex@xxxxxxxxxxx>
• Re: [UPDATED PATCH] SGISEEQ: use cached memory access to make driver work on IP28
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• Re: [UPDATED PATCH] SGISEEQ: use cached memory access to make driver work on IP28
  • From: Jeff Garzik <jgarzik@xxxxxxxxx>
• Re: [MIPS] Build an embedded initramfs into mips kernel
  • From: Willy Tarreau <w@xxxxxx>
• Re: [MIPS] Build an embedded initramfs into mips kernel
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: [MIPS] Build an embedded initramfs into mips kernel
  • From: "Alon Bar-Lev" <alon.barlev@xxxxxxxxx>
• Re: [MIPS] Build an embedded initramfs into mips kernel
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• [MIPS] Build an embedded initramfs into mips kernel
  • From: "Alon Bar-Lev" <alon.barlev@xxxxxxxxx>
• Re: PCI resource unavailable on mips
  • From: Jon Dufresne <jon.dufresne@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: PCI resource unavailable on mips
  • From: Jon Dufresne <jon.dufresne@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] Introduced GPI_RM9000 configuration parameter
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: timer irq setup
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [UPDATED PATCH] SGISEEQ: use cached memory access to make driver work on IP28
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• Re: [UPDATED PATCH] SGISEEQ: use cached memory access to make driver work on IP28
  • From: Jeff Garzik <jgarzik@xxxxxxxxx>
• [PATCH 1/4] Introduced GPI_RM9000 configuration parameter
  • From: Thomas Koeller <thomas.koeller@xxxxxxxxxxxxx>
• [PATCH 4/4] excite: Supply platform-specific compare and performance timer interrupts
  • From: Thomas Koeller <thomas.koeller@xxxxxxxxxxxxx>
• [PATCH 3/4] [MIPS] Allow platform to override default timer and performance counter interrupts
  • From: Thomas Koeller <thomas.koeller@xxxxxxxxxxxxx>
• [PATCH 2/4] [MIPS] Fix interrupt enable/disable hazards for RM9000
  • From: Thomas Koeller <thomas.koeller@xxxxxxxxxxxxx>
• excite patches
  • From: Thomas Koeller <thomas.koeller@xxxxxxxxxxxxx>
• Re: [OT?] is there something strange about __builtin_ffs these days?
  • From: Thiemo Seufer <ths@xxxxxxxxxxxx>
• [OT?] is there something strange about __builtin_ffs these days?
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• Re: [PATCH] include/asm-mips/: Spelling fixes
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] include/asm-mips/: Spelling fixes
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• [PATCH] include/asm-mips/: Spelling fixes
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH] arch/mips/: Spelling fixes
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [directfb-dev] Error in running gtk example on cross compiled GTK with DirectFB on MIPS board
  • From: kaka <share.kt@xxxxxxxxx>
• Re: [directfb-dev] Error in running gtk example on cross compiled GTK with DirectFB on MIPS board
  • From: Denis Oliver Kropp <dok@xxxxxxxxxxxx>
• Re: [PATCH][MIPS] fix user_cpus_allowed assignment
  • From: "Kevin D. Kissell" <kevink@xxxxxxxx>
• Re: PCI resource unavailable on mips
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: PCI resource unavailable on mips
  • From: Jon Dufresne <jon.dufresne@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH][MIPS] fix user_cpus_allowed assignment
  • From: "Pavel Kiryukhin" <vksavl@xxxxxxxxx>
• timer irq setup
  • From: Thomas Koeller <thomas@xxxxxxxxxxxxxxxxxx>
• Error in running gtk example on cross compiled GTK with DirectFB on MIPS board
  • From: kaka <share.kt@xxxxxxxxx>
• RE: GCC 3.4.5 and mftc0
  • From: "Mikael Starvik" <mikael.starvik@xxxxxxxx>
• Re: PCI resource unavailable on mips
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH][1/2][MIPS] remove unused struct bootloader_header
  • From: Yoichi Yuasa <yoichi_yuasa@xxxxxxxxxxxxxx>
• [PATCH][2/2][MIPS] remove unused lasat definitions
  • From: Yoichi Yuasa <yoichi_yuasa@xxxxxxxxxxxxxx>
• Re: Still no 2.6.24 on ip32
  • From: Giuseppe Sacco <giuseppe@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: PCI resource unavailable on mips
  • From: Jon Dufresne <jon.dufresne@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Slow transfer for loopback
  • From: "Ratin Rahman (mratin)" <mratin@xxxxxxxxx>
• Re: PCI resource unavailable on mips
  • From: Jon Dufresne <jon.dufresne@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: GCC 3.4.5 and mftc0
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] RBTX4927: linux-2.6.24-rc4 hang on boot
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH][MIPS] move vr41xx_calculate_clock_frequency() to plat_time_init()
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH][1/2][MIPS] remove unneeded button check for reset
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH][MIPS] move the eXcite local config to excitedirectory
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH][2/2][MIPS] add cpu_wait() to machine_halt()
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: PCI resource unavailable on mips
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• GCC 3.4.5 and mftc0
  • From: "Mikael Starvik" <mikael.starvik@xxxxxxxx>
• Re: Inter processor synchronization
  • From: "Kevin D. Kissell" <kevink@xxxxxxxx>
• RE: Inter processor synchronization
  • From: "Nilanjan Roychowdhury" <Nilanjan.Roychowdhury@xxxxxxxx>
• GCC bug affecting MIPS (was Re: SiByte 1480 & Branch Likely instructions?)
  • From: "Kaz Kylheku" <kaz@xxxxxxxxxxxxxxxxx>
• [PATCH][MIPS] kernel build fails if CONFIG_KGDB=y and CONFIG_SMP=n
  • From: Frank Rowand <frank.rowand@xxxxxxxxxxx>
• Re: questions on struct sigcontext
  • From: Daniel Jacobowitz <dan@xxxxxxxxxx>
• Re: Inter processor synchronization
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Inter processor synchronization
  • From: "Nilanjan Roychowdhury" <Nilanjan.Roychowdhury@xxxxxxxx>
• Re: questions on struct sigcontext
  • From: David Daney <ddaney@xxxxxxxxxx>
• Re: questions on struct sigcontext
  • From: "Chris Friesen" <cfriesen@xxxxxxxxxx>
• Re: questions on struct sigcontext
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: questions on struct sigcontext
  • From: Daniel Jacobowitz <dan@xxxxxxxxxx>
• Re: questions on struct sigcontext
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: questions on struct sigcontext
  • From: David Daney <ddaney@xxxxxxxxxx>
• Re: questions on struct sigcontext
  • From: "Chris Friesen" <cfriesen@xxxxxxxxxx>
• Re: [UPDATED PATCH] IP28 support
  • From: Richard Sandiford <rsandifo@xxxxxxxxxxxxx>
• Re: questions on struct sigcontext
  • From: David Daney <ddaney@xxxxxxxxxx>
• Re: [UPDATED PATCH] IP28 support
  • From: Richard Sandiford <rsandifo@xxxxxxxxxxxxx>
• questions on struct sigcontext
  • From: "Chris Friesen" <cfriesen@xxxxxxxxxx>
• Re: 2.6.24-rc2 crash in kmap_coherent
  • From: Giuseppe Sacco <giuseppe@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: 2.6.24-rc2 crash in kmap_coherent
  • From: Giuseppe Sacco <giuseppe@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: 2.6.24-rc2 crash in kmap_coherent
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [UPDATED PATCH] IP28 support
  • From: peter fuerst <pf@xxxxxxxx>
• [PATCH][MIPS] move the eXcite local config to excitedirectory
  • From: Yoichi Yuasa <yoichi_yuasa@xxxxxxxxxxxxxx>
• [PATCH][2/2][MIPS] add cpu_wait() to machine_halt()
  • From: Yoichi Yuasa <yoichi_yuasa@xxxxxxxxxxxxxx>
• [PATCH][1/2][MIPS] remove unneeded button check for reset
  • From: Yoichi Yuasa <yoichi_yuasa@xxxxxxxxxxxxxx>
• [PATCH][MIPS] move vr41xx_calculate_clock_frequency() to plat_time_init()
  • From: Yoichi Yuasa <yoichi_yuasa@xxxxxxxxxxxxxx>
• Re: 2.6.24-rc2 crash in kmap_coherent
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: Cobalt fixes
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: 2.6.24-rc2 crash in kmap_coherent
  • From: David Daney <ddaney@xxxxxxxxxx>
• Re: Cobalt fixes
  • From: Yoichi Yuasa <yoichi_yuasa@xxxxxxxxxxxxxx>
• Re: 2.6.24-rc2 crash in kmap_coherent
  • From: David Daney <ddaney@xxxxxxxxxx>
• 2.6.24-rc2 crash in kmap_coherent
  • From: Florian Lohoff <flo@xxxxxxxxxx>
• Re: Still no 2.6.24 on ip32 [was: Re: 2.6.24-rc1 does not boot on SGI]
  • From: Ricardo Mendoza <ricmm@xxxxxxxxx>
• Re: Still no 2.6.24 on ip32 [was: Re: 2.6.24-rc1 does not boot on SGI]
  • From: Giuseppe Sacco <giuseppe@xxxxxxxxxxxxxxxxxxxxxxxxx>
• CFP for embedded room at FOSDEM
  • From: Philippe De Swert <philippedeswert@xxxxxxxxxx>
• [PATCH] RBTX4927: linux-2.6.24-rc4 hang on boot
  • From: Frank Rowand <frank.rowand@xxxxxxxxxxx>
• Re: Still no 2.6.24 on ip32 [was: Re: 2.6.24-rc1 does not boot on SGI]
  • From: Ricardo Mendoza <ricmm@xxxxxxxxx>
• Re: Cobalt fixes
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: Cobalt fixes
  • From: Yoichi Yuasa <yoichi_yuasa@xxxxxxxxxxxxxx>
• Re: Cobalt fixes
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: Cobalt fixes
  • From: Yoichi Yuasa <yoichi_yuasa@xxxxxxxxxxxxxx>
• Re: [PATCH] Alchemy: fix off by two error in __fixup_bigphys_addr()
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] Alchemy: fix PCI resource conflict (take 2)
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Cobalt fixes
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Still no 2.6.24 on ip32 [was: Re: 2.6.24-rc1 does not boot on SGI]
  • From: Giuseppe Sacco <giuseppe@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH][MIPS] Kconfig fixes for BCM47XX platform
  • From: Aurelien Jarno <aurelien@xxxxxxxxxxx>
• Re: 2.6.24-rc1 does not boot on SGI
  • From: Giuseppe Sacco <giuseppe@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: 2.6.24-rc1 does not boot on SGI
  • From: Ricardo Mendoza <ricmm@xxxxxxxxx>
• Re: [PATCH] Alchemy: fix PCI resource conflict (take 2)
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• RE: [PATCH] Alchemy: fix PCI resource conflict (take 2)
  • From: Nathan Eggan <nathan_eggan@xxxxxxxx>
• [PATCH] Alchemy: fix off by two error in __fixup_bigphys_addr()
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• [PATCH] Alchemy: fix PCI resource conflict (take 2)
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: SiByte 1480 & Branch Likely instructions?
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: SiByte 1480 & Branch Likely instructions?
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: SiByte 1480 & Branch Likely instructions?
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: is there a standard high res timer patch for mips?
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH][MIPS] set up Cobalt's mips_hpt_frequency
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH][MIPS] set up Cobalt's mips_hpt_frequency
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: is there a standard high res timer patch for mips?
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH][MIPS] set up Cobalt's mips_hpt_frequency
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: 2.6.24-rc1 does not boot on SGI
  • From: Giuseppe Sacco <giuseppe@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [UPDATED PATCH] IP28 support
  • From: Richard Sandiford <rsandifo@xxxxxxxxxxxxx>
• [PATCH][MIPS] Enable SSB_DRIVER_EXTIF on BCM47XX platform
  • From: Aurelien Jarno <aurelien@xxxxxxxxxxx>
• SSB Bus: Need advice representing 2 devices in a core (BCM5354 USB2.0 core)
  • From: Steve Brown <sbrown@xxxxxxxxxxxx>
• is there a standard high res timer patch for mips?
  • From: zhuzhenhua <zzh.hust@xxxxxxxxx>
• Re: [PATCH][MIPS] set up Cobalt's mips_hpt_frequency
  • From: Yoichi Yuasa <yoichi_yuasa@xxxxxxxxxxxxxx>
• Re: [PATCH][MIPS] remove mips_timer_state()
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH][MIPS] set up Cobalt's mips_hpt_frequency
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [SPAM] Re: Donation of an Indigo 2 R4K@250
  • From: Martin Michlmayr <tbm@xxxxxxxxxx>
• [PATCH][MIPS] set up Cobalt's mips_hpt_frequency
  • From: Yoichi Yuasa <yoichi_yuasa@xxxxxxxxxxxxxx>
• [PATCH][MIPS] remove mips_timer_state()
  • From: Yoichi Yuasa <yoichi_yuasa@xxxxxxxxxxxxxx>
• Re: SiByte 1480 & Branch Likely instructions?
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: SiByte 1480 & Branch Likely instructions?
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [UPDATED PATCH] IP28 support
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [UPDATED PATCH] IP28 support
  • From: Richard Sandiford <rsandifo@xxxxxxxxxxxxx>
• Re: [UPDATED PATCH] IP28 support
  • From: peter fuerst <post@xxxxxxxx>
• Re: [UPDATED PATCH] IP28 support
  • From: Richard Sandiford <rsandifo@xxxxxxxxxxxxx>
• Re: [UPDATED PATCH] IP28 support
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [UPDATED PATCH] SGIWD93: use cached memory access to make driver work on IP28
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] SNI_RM: EISA support for A20R/RM200
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [UPDATED PATCH] IP28 support
  • From: Richard Sandiford <rsandifo@xxxxxxxxxxxxx>
• RE: SiByte 1480 & Branch Likely instructions?
  • From: "Kaz Kylheku" <kaz@xxxxxxxxxxxxxxxxx>
• SiByte 1480 & Branch Likely instructions?
  • From: "Kaz Kylheku" <kaz@xxxxxxxxxxxxxxxxx>
• Unhandled kernel unaligned access in do_ade+0x2b8/0x430
  • From: Giuseppe Sacco <giuseppe@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] Alchemy: Au1210/Au1250 CPU support
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] Alchemy: Fix Au1x SD controller IRQ
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: Bug in Au1x00 UART or USB drivers for 2.6 kernels?
  • From: Nathan Eggan <nathan_eggan@xxxxxxxx>
• Re: [PATCH] Alchemy: fix PCI resource conflict
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH] Alchemy: fix PCI resource conflict
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] Alchemy: fix PCI resource conflict
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: Bug in Au1x00 UART or USB drivers for 2.6 kernels?
  • From: Nathan Eggan <nathan_eggan@xxxxxxxx>
• [PATCH] Fix oprofile configuration breakage
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: Bug in Au1x00 UART or USB drivers for 2.6 kernels?
  • From: Freddy Spierenburg <freddy@xxxxxxxxxxxxxxx>
• Re: Bug in Au1x00 UART or USB drivers for 2.6 kernels?
  • From: Nathan Eggan <nathan_eggan@xxxxxxxx>
• Re: [UPDATED PATCH] IP28 support
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [UPDATED PATCH] IP28 support
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [RFC PATCH] Alchemy: Au1210/Au1250 CPU support
  • From: Manuel Lauss <mano@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] Alchemy: Fix Au1x SD controller IRQ
  • From: Manuel Lauss <mano@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [UPDATED PATCH] IP28 support
  • From: David Daney <ddaney@xxxxxxxxxx>
• Re: [UPDATED PATCH] IP28 support
  • From: peter fuerst <pf@xxxxxxxx>
• Re: [PATCH 0/2] Alchemy: fix interrupt routing
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 0/2] Alchemy: fix interrupt routing
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 0/2] Alchemy: fix interrupt routing
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 0/2] Alchemy: fix interrupt routing
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 0/2] Alchemy: fix interrupt routing
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] Alchemy: fix IRQ bases
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Bug in Au1x00 UART or USB drivers for 2.6 kernels?
  • From: Nathan Eggan <nathan_eggan@xxxxxxxx>
• Re: [PATCH 1/2] Alchemy: replace ffs() with __ffs()
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 0/2] Alchemy: fix interrupt routing
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxxx>
• [PATCH 2/2] Alchemy: fix IRQ bases
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• [PATCH 1/2] Alchemy: replace ffs() with __ffs()
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• [PATCH 0/2] Alchemy: fix interrupt routing
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [UPDATED PATCH] IP28 support
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• Re: [PATCH] SC26XX: New serial driver for SC2681 uarts
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• Re: [UPDATED PATCH] IP28 support
  • From: Kumba <kumba@xxxxxxxxxx>
• Re: [PATCH] Add support for SB1 hardware watchdog.
  • From: "Kaz Kylheku" <kaz@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] Add support for SB1 hardware watchdog.
  • From: "Kaz Kylheku" <kaz@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] SC26XX: New serial driver for SC2681 uarts
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] SC26XX: New serial driver for SC2681 uarts
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• Re: [PATCH] SC26XX: New serial driver for SC2681 uarts
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• Re: [UPDATED PATCH] SGISEEQ: use cached memory access to make driver work on IP28
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [UPDATED PATCH] SGISEEQ: use cached memory access to make driver work on IP28
  • From: Jeff Garzik <jgarzik@xxxxxxxxx>
• [PATCH] Add support for SB1 hardware watchdog, try#2
  • From: Andrew Sharp <andy.sharp@xxxxxxxxxx>
• Re: [PATCH] SC26XX: New serial driver for SC2681 uarts
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] SC26XX: New serial driver for SC2681 uarts
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] SC26XX: New serial driver for SC2681 uarts
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• Re: smp8634 add memory at dram1
  • From: "David Kuk" <david.kuk@xxxxxxxxxx>
• Re: [PATCH] SC26XX: New serial driver for SC2681 uarts
  • From: Arjan van de Ven <arjan@xxxxxxxxxxxxx>
• Re: [PATCH] SC26XX: New serial driver for SC2681 uarts
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Add support for SB1 hardware watchdog.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] MIPS: vmlinux.lds.S: handle .{init,exit}.bss sections
  • From: Franck Bui-Huu <vagabon.xyz@xxxxxxxxx>
• RE: Rename Sibyte duart devices?
  • From: "Kaz Kylheku" <kaz@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] Add code to determine the L2 cache size on Sibyte 1250/112x processors.
  • From: Andrew Sharp <andy.sharp@xxxxxxxxxx>
• Re: [PATCH] Add support for SB1 hardware watchdog.
  • From: Andrew Sharp <andy.sharp@xxxxxxxxxx>
• Re: [PATCH] Add code to determine the L2 cache size on Sibyte 1250/112x processors.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] Add support for SB1 hardware watchdog.
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• [PATCH] Add support for SB1 hardware watchdog.
  • From: Andrew Sharp <andy.sharp@xxxxxxxxxx>
• [PATCH] Add code to determine the L2 cache size on Sibyte 1250/112x processors.
  • From: Andrew Sharp <andy.sharp@xxxxxxxxxx>
• RE: [PATCH 2/2] MIPS: vmlinux.lds.S: handle .{init,exit}.bss sections
  • From: "Luck, Tony" <tony.luck@xxxxxxxxx>
• Re: Rename Sibyte duart devices?
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: Rename Sibyte duart devices?
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: Rename Sibyte duart devices?
  • From: Thiemo Seufer <ths@xxxxxxxxxxxx>
• Re: CONFIG_LEDS_COBALT_RAQ not as module
  • From: Yoichi Yuasa <yoichi_yuasa@xxxxxxxxxxxxxx>
• Rename Sibyte duart devices?
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Rename Sibyte duart devices?
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] SC26XX: New serial driver for SC2681 uarts
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] Yet another __initxxx annotations: __initbss/__exitbss
  • From: Franck Bui-Huu <vagabon.xyz@xxxxxxxxx>
• [PATCH] CHAR: Use SGI_HAS_DS1286 for SGI_DS1286 depends
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• [PATCH] SERIAL: Use SGI_HAS_ZILOG for IP22_ZILOG depends
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• [UPDATED PATCH] IP28 support
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• [PATCH] I8042: Use SGI_HAS_I8042 to select SGI i8042 handlinig
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• [PATCH] PARTITION: Use DEFAULT_SGI_PARTITION for SGI_PARTION default
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• [PATCH] WATCHDOG: Use SGI_HAS_INDYDOG for INDYDOG depends
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• [UPDATED PATCH] SGISEEQ: use cached memory access to make driver work on IP28
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• [UPDATED PATCH] SGIWD93: use cached memory access to make driver work on IP28
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] Yet another __initxxx annotations: __initbss/__exitbss
  • From: Russell King <rmk@xxxxxxxxxxxxxxxx>
• Re: [PATCH] SGISEEQ: use cached memory access to make driver work on IP28
  • From: Jeff Garzik <jgarzik@xxxxxxxxx>
• [PATCH 2/2] MIPS: vmlinux.lds.S: handle .{init,exit}.bss sections
  • From: Franck Bui-Huu <fbuihuu@xxxxxxxxx>
• [PATCH 1/2] Yet another __initxxx annotations: __initbss/__exitbss
  • From: Franck Bui-Huu <fbuihuu@xxxxxxxxx>
• [RFC] Yet another __init annotation: __initbss
  • From: Franck Bui-Huu <fbuihuu@xxxxxxxxx>
• [PATCH] SNI_RM: EISA support for A20R/RM200
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• [RFC] change how IP22/IP28 drivers are selected by Kconfig
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• CONFIG_LEDS_COBALT_RAQ not as module
  • From: Martin Michlmayr <tbm@xxxxxxxxxx>
• Re: BigSur: io_map_base not set for PCI bus 0000:00
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: Problem in the usage of mmap command(in directFB)
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• RE: Problem in the usage of mmap command(in directFB)
  • From: "Kaz Kylheku" <kaz@xxxxxxxxxxxxxxxxx>
• Re: git problem
  • From: Thomas Koeller <thomas@xxxxxxxxxxxxxxxxxx>
• Re: git problem
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: git problem
  • From: Franck Bui-Huu <vagabon.xyz@xxxxxxxxx>
• Re: git problem
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [UPDATED PATCH] IP28 support
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] IP28 support
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: git problem
  • From: Franck Bui-Huu <vagabon.xyz@xxxxxxxxx>
• [UPDATED PATCH] IP28 support
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• Re: [PATCH] IP28 support
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• Re: [PATCH] IP28 support
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• Problem in the usage of mmap command(in directFB)
  • From: kaka <share.kt@xxxxxxxxx>
• Re: git problem
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• git problem
  • From: Thomas Koeller <thomas@xxxxxxxxxxxxxxxxxx>
• [PATCH] disable date alarm for malta rtc.
  • From: "Pavel Kiryukhin" <vksavl@xxxxxxxxx>
• Re: [PATCH] IP28: added cache barrier to assembly routines
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] IP28: added cache barrier to assembly routines
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH] IP28 support
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] SGIWD93: use cached memory access to make driver work on IP28
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] IP28: added cache barrier to assembly routines
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: BUG: using smp_processor_id() in preemptible code
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] Use correct dma flushing in dma_cache_sync()
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [UPDATED PATCH] SGIWD93: use cached memory access to make driver work on IP28
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• mips build breakage in current mainline
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] IP28 support
  • From: peter fuerst <post@xxxxxxxx>
• Re: [PATCH] SGIWD93: use cached memory access to make driver work on IP28
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• Re: [PATCH] SGIWD93: use cached memory access to make driver work on IP28
  • From: peter fuerst <post@xxxxxxxx>
• [PATCH] Use correct dma flushing in dma_cache_sync()
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• Re: prism54 - MIPS do_be() trap caught
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH] fix warning when using PHYS_TO_XKSEG_xx()
  • From: Andrew Sharp <andy.sharp@xxxxxxxxxx>
• Re: prism54 - MIPS do_be() trap caught
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• prism54 - MIPS do_be() trap caught
  • From: "Luis R. Rodriguez" <mcgrof@xxxxxxxxx>
• Re: [PATCH] SGISEEQ: use cached memory access to make driver work on IP28
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• BUG: using smp_processor_id() in preemptible code
  • From: "Pavel Kiryukhin" <vksavl@xxxxxxxxx>
• Re: [PATCH] qemu: do not enable IP7 blindly
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] IP22/IP28: fix extracting board/chip rev
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] Use real cache invalidate
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: SGI IP28 support
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] SGIWD93: use cached memory access to make driver work on IP28
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• Re: [PATCH] fix warning when using PHYS_TO_XKSEG_xx()
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• Re: [PATCH] SGIWD93: use cached memory access to make driver work on IP28
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: SGI IP28 support
  • From: post@xxxxxxxx
• Re: [PATCH] fix warning when using PHYS_TO_XKSEG_xx()
  • From: Andrew Sharp <andy.sharp@xxxxxxxxxx>
• Re: SGI IP28 support
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• [PATCH] IP28 support
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• [PATCH] SGISEEQ: use cached memory access to make driver work on IP28
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• [PATCH] Use real cache invalidate
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• [PATCH] IP28: added cache barrier to assembly routines
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• [PATCH] SGIWD93: use cached memory access to make driver work on IP28
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• [PATCH] fix warning when using PHYS_TO_XKSEG_xx()
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• SGI IP28 support
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• [PATCH] IP22/IP28: fix extracting board/chip rev
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• RE: Tool chain for linux using mips
  • From: "Mitchell, Earl" <earlm@xxxxxxxx>
• Re: [PATCH] [MIPS]: Compliment va_start() with va_end().
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] IP22: Fix modules for 64bit kernels by using a CKSEG2 MAP_BASE
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [UPDATED PATCH] IP22ZILOG: fix lockup and sysrq
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: BigSur: oops loading ramdisk
  • From: Martin Michlmayr <tbm@xxxxxxxxxx>
• [UPDATED PATCH] IP22ZILOG: fix lockup and sysrq
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• Re: BigSur: oops loading ramdisk
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: ohci-ssb driver on a Broadcom BCM5354
  • From: Michael Buesch <mb@xxxxxxxxx>
• Re: BigSur: garbled characters during boot
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: ohci-ssb driver on a Broadcom BCM5354
  • From: Steve Brown <sbrown@xxxxxxxxxxxx>
• Re: [SPAM] Tool chain for linux using mips
  • From: Markus Gothe <markus.gothe@xxxxxx>
• Re: BigSur: garbled characters during boot
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• Re: Tool chain for linux using mips
  • From: Wolfgang Denk <wd@xxxxxxx>
• Tool chain for linux using mips
  • From: Wink Saville <wink@xxxxxxxxxxx>
• Re: BigSur: io_map_base not set for PCI bus 0000:00
  • From: Martin Michlmayr <tbm@xxxxxxxxxx>
• BigSur: io_map_base not set for PCI bus 0000:00
  • From: Martin Michlmayr <tbm@xxxxxxxxxx>
• Re: BigSur: garbled characters during boot
  • From: Martin Michlmayr <tbm@xxxxxxxxxx>
• Re: BigSur: garbled characters during boot
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: BigSur: oops loading ramdisk
  • From: Martin Michlmayr <tbm@xxxxxxxxxx>
• BigSur: oops loading ramdisk
  • From: Martin Michlmayr <tbm@xxxxxxxxxx>
• BigSur: garbled characters during boot
  • From: Martin Michlmayr <tbm@xxxxxxxxxx>
• Usage of mmap command(in directFB)
  • From: kaka <share.kt@xxxxxxxxx>
• Re: [PATCH] IP22: Fix modules for 64bit kernels by using a CKSEG2 MAP_BASE
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• (no subject)
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• [PATCH] [MIPS]: Compliment va_start() with va_end().
  • From: Richard Knutsson <ricknu-0@xxxxxxxxxxxxxx>
• [PATCH] IP22: Fix modules for 64bit kernels by using a CKSEG2 MAP_BASE
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• [PATCH] IP22: Fix broken EISA interrupt setup by switching to generic i8259
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• [PATCH] IP22: Fix broken eeprom access by using __raw_readl/__raw_writel
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• [PATCH 1/2] TXx9 watchdog driver
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• [PATCH 2/2] TXx9 watchdog support for rbhma3100,rbhma4200,rbhma4500
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [MIPS] irq_cpu: use handle_percpu_irq handler to avoid dropping interrupts.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [MIPS] irq_cpu: use handle_percpu_irq handler to avoid dropping interrupts.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [MIPS] irq_cpu: use handle_percpu_irq handler to avoid dropping interrupts.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] qemu: do not enable IP7 blindly
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [MIPS] irq_cpu: use handle_percpu_irq handler to avoid dropping interrupts.
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH 02/59] arch/mips: Add missing "space"
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: smp8634 add memory at dram1
  • From: "David Kuk" <david.kuk@xxxxxxxxxx>
• Re: how to use memory before kernel load address?
  • From: zhuzhenhua <zzh.hust@xxxxxxxxx>
• Re: futex_wake_op deadlock?
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: futex_wake_op deadlock?
  • From: David Daney <ddaney@xxxxxxxxxx>
• RE: futex_wake_op deadlock?
  • From: "Kaz Kylheku" <kaz@xxxxxxxxxxxxxxxxx>
• Re: futex_wake_op deadlock?
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• RE: futex_wake_op deadlock?
  • From: "Kaz Kylheku" <kaz@xxxxxxxxxxxxxxxxx>
• Re: how to use memory before kernel load address?
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: how to use memory before kernel load address?
  • From: Thiemo Seufer <ths@xxxxxxxxxxxx>
• Re: [SPAM] Re: IP22 64Bit arcboot - current git crashes on 3 machines at different points
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: futex_wake_op deadlock?
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: Usage of mmap command
  • From: Denis Oliver Kropp <dok@xxxxxxxxxxxx>
• Usage of mmap command
  • From: kaka <share.kt@xxxxxxxxx>
• Re: [directfb-dev] Usage of mmap command
  • From: Denis Oliver Kropp <dok@xxxxxxxxxxxx>
• Re: [SPAM] Re: IP22 64Bit arcboot - current git crashes on 3 machines at different points
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• Usage of mmap command
  • From: kaka <share.kt@xxxxxxxxx>
• Re: smp8634 add memory at dram1
  • From: "David Kuk" <david.kuk@xxxxxxxxxx>
• Re: [SPAM] how to use memory before kernel load address?
  • From: Markus Gothe <markus.gothe@xxxxxx>
• Re: [SPAM] Re: IP22 64Bit arcboot - current git crashes on 3 machines at different points
  • From: Markus Gothe <markus.gothe@xxxxxx>
• [PATCH 02/59] arch/mips: Add missing "space"
  • From: Joe Perches <joe@xxxxxxxxxxx>
• how to use memory before kernel load address?
  • From: zhuzhenhua <zzh.hust@xxxxxxxxx>
• RE: "exportfs -a" -> stale NFS filehandle
  • From: "Kaz Kylheku" <kaz@xxxxxxxxxxxxxxxxx>
• RE: futex_wake_op deadlock?
  • From: "Kaz Kylheku" <kaz@xxxxxxxxxxxxxxxxx>
• RE: futex_wake_op deadlock?
  • From: "Kaz Kylheku" <kaz@xxxxxxxxxxxxxxxxx>
• Re: IP22 64Bit arcboot - current git crashes on 3 machines at different points
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Confirmation Request (1498870506)
  • From: "linux administration" <linux-feed@xxxxxxxxxxx>
• Re: futex_wake_op deadlock?
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: ohci-ssb driver on a Broadcom BCM5354
  • From: Michael Buesch <mb@xxxxxxxxx>
• IP22 64Bit arcboot - current git crashes on 3 machines at different points
  • From: Florian Lohoff <flo@xxxxxxxxxx>
• Re: ohci-ssb driver on a Broadcom BCM5354
  • From: "John W. Linville" <linville@xxxxxxxxxxxxx>
• Re: ohci-ssb driver on a Broadcom BCM5354
  • From: Franck Bui-Huu <vagabon.xyz@xxxxxxxxx>
• ohci-ssb driver on a Broadcom BCM5354
  • From: Steve Brown <sbrown@xxxxxxxxxxxx>
• [PATCH, REPOST] Fix/Rewrite of the mipsnet driver
  • From: Thiemo Seufer <ths@xxxxxxxxxxxx>
• Re: Preliminary patch for ip32 ttyS* device
  • From: Martin Michlmayr <tbm@xxxxxxxxxx>
• Re: Cannot unwind through MIPS signal frames with ICACHE_REFILLS_WORKAROUND_WAR
  • From: Franck Bui-Huu <vagabon.xyz@xxxxxxxxx>
• futex_wake_op deadlock?
  • From: "Kaz Kylheku" <kaz@xxxxxxxxxxxxxxxxx>
• [PATCH] Introduce __fill_user() and kill __bzero() [take #3]
  • From: Franck Bui-Huu <fbuihuu@xxxxxxxxx>
• Re: "exportfs -a" -> stale NFS filehandle
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] Introduce __fill_user() and kill __bzero() [take #2]
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] Introduce __fill_user() and kill __bzero() [take #2]
  • From: Franck Bui-Huu <vagabon.xyz@xxxxxxxxx>
• RE: "exportfs -a" -> stale NFS filehandle
  • From: "Kaz Kylheku" <kaz@xxxxxxxxxxxxxxxxx>
• Re: "exportfs -a" -> stale NFS filehandle
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: gdb chokes on core from 64-bit kernel (patch)
  • From: Andrew Sharp <andy.sharp@xxxxxxxxxx>
• RE: "exportfs -a" -> stale NFS filehandle
  • From: "Kaz Kylheku" <kaz@xxxxxxxxxxxxxxxxx>
• RE: "exportfs -a" -> stale NFS filehandle
  • From: "Kaz Kylheku" <kaz@xxxxxxxxxxxxxxxxx>
• Re: Cannot unwind through MIPS signal frames with ICACHE_REFILLS_WORKAROUND_WAR
  • From: David Daney <ddaney@xxxxxxxxxx>
• Re: [PATCH] Introduce __fill_user() and kill __bzero() [take #2]
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] Introduce __fill_user() and kill __bzero() [take #2]
  • From: Franck Bui-Huu <fbuihuu@xxxxxxxxx>
• Re: Cannot unwind through MIPS signal frames with ICACHE_REFILLS_WORKAROUND_WAR
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• RE: smp8634 add memory at dram1
  • From: "Gustafsson Marcus-MGU001" <marcus.gustafsson@xxxxxxxxxxxx>
• Re: Cannot unwind through MIPS signal frames with ICACHE_REFILLS_WORKAROUND_WAR
  • From: Franck Bui-Huu <vagabon.xyz@xxxxxxxxx>
• Re: "exportfs -a" -> stale NFS filehandle
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• "exportfs -a" -> stale NFS filehandle
  • From: "Kaz Kylheku" <kaz@xxxxxxxxxxxxxxxxx>
• Re: MIPS assembly directives in GCC
  • From: Jiju George T <jijuktm@xxxxxxxxx>
• Re: smp8634 add memory at dram1
  • From: David Daney <ddaney@xxxxxxxxxx>
• Re: [PATCH] Introduce __fill_user() and kill __bzero()
  • From: "Franck Bui-Huu" <vagabon.xyz@xxxxxxxxx>
• Re: [PATCH] Introduce __fill_user() and kill __bzero()
  • From: Thiemo Seufer <ths@xxxxxxxxxxxx>
• Re: smp8634 add memory at dram1
  • From: david@xxxxxxxxxxxxxxxxxxxxx
• Re: [PATCH] Introduce __fill_user() and kill __bzero()
  • From: Franck Bui-Huu <vagabon.xyz@xxxxxxxxx>
• Re: [PATCH] Introduce __fill_user() and kill __bzero()
  • From: Thiemo Seufer <ths@xxxxxxxxxxxx>
• Re: smp8634 add memory at dram1
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• smp8634 add memory at dram1
  • From: David Kuk <david.kuk@xxxxxxxxxx>
• Re: [PATCH] Introduce __fill_user() and kill __bzero()
  • From: Franck Bui-Huu <vagabon.xyz@xxxxxxxxx>
• Re: hello
  • From: Freddy Spierenburg <freddy@xxxxxxxxxxxxxxx>
• hello
  • From: David Kuk <david.kuk@xxxxxxxxxx>
• Re: Cannot unwind through MIPS signal frames withICACHE_REFILLS_WORKAROUND_WAR
  • From: "Kevin D. Kissell" <kevink@xxxxxxxx>
• Re: Cannot unwind through MIPS signal frames with ICACHE_REFILLS_WORKAROUND_WAR
  • From: "Andrew Pinski" <pinskia@xxxxxxxxx>
• VDSO on mips (was Re: Cannot unwind through MIPS signal frames with ICACHE_REFILLS_WORKAROUND_WAR)
  • From: Franck Bui-Huu <vagabon.xyz@xxxxxxxxx>
• Re: Cannot unwind through MIPS signal frames with ICACHE_REFILLS_WORKAROUND_WAR
  • From: David Daney <ddaney@xxxxxxxxxx>
• Re: Cannot unwind through MIPS signal frames with ICACHE_REFILLS_WORKAROUND_WAR
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: Cannot unwind through MIPS signal frames with ICACHE_REFILLS_WORKAROUND_WAR
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: Cannot unwind through MIPS signal frames with ICACHE_REFILLS_WORKAROUND_WAR
  • From: "Franck Bui-Huu" <vagabon.xyz@xxxxxxxxx>
• Re: Cannot unwind through MIPS signal frames with ICACHE_REFILLS_WORKAROUND_WAR
  • From: "Kevin D. Kissell" <kevink@xxxxxxxx>
• Re: Cannot unwind through MIPS signal frames with ICACHE_REFILLS_WORKAROUND_WAR
  • From: "Franck Bui-Huu" <vagabon.xyz@xxxxxxxxx>
• Re: Cannot unwind through MIPS signal frames with ICACHE_REFILLS_WORKAROUND_WAR
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: Cannot unwind through MIPS signal frames with ICACHE_REFILLS_WORKAROUND_WAR
  • From: "Franck Bui-Huu" <vagabon.xyz@xxxxxxxxx>
• Re: Cannot unwind through MIPS signal frames with ICACHE_REFILLS_WORKAROUND_WAR
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: problem with 64bit kernel, BOOT_ELF32 and memory outside CKSEG0
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: Cannot unwind through MIPS signal frames with ICACHE_REFILLS_WORKAROUND_WAR
  • From: Andrew Haley <aph-gcc@xxxxxxxxxxxxxxxxxxx>
• Re: [SPAM] Re: Donation of an Indigo 2 R4K@250
  • From: Martin Michlmayr <tbm@xxxxxxxxxx>
• Cannot unwind through MIPS signal frames with ICACHE_REFILLS_WORKAROUND_WAR
  • From: David Daney <ddaney@xxxxxxxxxx>
• Re: problem with 64bit kernel, BOOT_ELF32 and memory outside CKSEG0
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• Re: [PATCH] sni/pcimt.c: s/achknowledge/acknowledge
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] arch/mips/Makefile: Fix canonical system names
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] sni/pcimt.c: s/achknowledge/acknowledge
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• [PATCH] arch/mips/Makefile: Fix canonical system names
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [SPAM] Re: Donation of an Indigo 2 R4K@250
  • From: Markus Gothe <markus.gothe@xxxxxx>
• Re: problem with 64bit kernel, BOOT_ELF32 and memory outside CKSEG0
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: problem with 64bit kernel, BOOT_ELF32 and memory outside CKSEG0
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• Re: problem with 64bit kernel, BOOT_ELF32 and memory outside CKSEG0
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: WAIT vs. tickless kernel
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• [PATCH 2/2] TXx9 watchdog support for rbhma3100,rbhma4200,rbhma4500
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• [PATCH 1/2] TXx9 watchdog driver
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• [PATCH] Move kernel/time/Kconfig menu to appropriate place
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• problem with 64bit kernel, BOOT_ELF32 and memory outside CKSEG0
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• Re: [PATCH] Introduce __fill_user() and kill __bzero()
  • From: Franck Bui-Huu <vagabon.xyz@xxxxxxxxx>
• Re: [PATCH] Introduce __fill_user() and kill __bzero()
  • From: Thiemo Seufer <ths@xxxxxxxxxxxx>
• Re: Donation of an Indigo 2 R4K@250
  • From: Martin Michlmayr <tbm@xxxxxxxxxx>
• [PATCH] Use __fill_user() to clear bss.
  • From: Franck Bui-Huu <fbuihuu@xxxxxxxxx>
• [PATCH] Introduce __fill_user() and kill __bzero()
  • From: Franck Bui-Huu <fbuihuu@xxxxxxxxx>
• Re: [PATCH][MIPS] fix LASAT IRQ overlap
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH][MIPS] fix LASAT IRQ overlap
  • From: Yoichi Yuasa <yoichi_yuasa@xxxxxxxxxxxxxx>
• Re: gdb chokes on core from 64-bit kernel (patch)
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] SNI PCIT CPLUS: workaround for messed up PCI irq wiring
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] SNI PCIT CPLUS: workaround for messed up PCI irq wiring
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• Re: [PATCH] Put cast inside macro instead of all the callers
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• [PATCH] MIPS - remove dead config symbols from MIPS code
  • From: Jiri Olsa <olsajiri@xxxxxxxxx>
• Re: [PATCH][au1000] Remove useless EXTRA_CFLAGS
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH] IP22: Disable EARLY PRINTK, because it breaks serial console
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH] IP22: Disable EARLY PRINTK, because it breaks serial console
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH (2.6.25) 2/2] suspend: clean up Kconfig
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH][au1000] Remove useless EXTRA_CFLAGS
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH (2.6.25) 2/2] suspend: clean up Kconfig
  • From: Paul Mackerras <paulus@xxxxxxxxx>
• Re: [PATCH (2.6.25) 2/2] suspend: clean up Kconfig
  • From: Russell King <rmk@xxxxxxxxxxxxxxxx>
• Re: [PATCH] IP22: Disable EARLY PRINTK, because it breaks serial console
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• Re: [PATCH (2.6.25) 2/2] suspend: clean up Kconfig
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: Deleting read-only environment variable on Sibyte board.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• RE: Deleting read-only environment variable on Sibyte board.
  • From: "Manoj Ekbote" <manoj.ekbote@xxxxxxxxxxxx>
• Re: Preliminary patch for ip32 ttyS* device
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH] IP22: Disable EARLY PRINTK, because it breaks serial console
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH (2.6.25) 2/2] suspend: clean up Kconfig
  • From: Paul Mundt <lethal@xxxxxxxxxxxx>
• [PATCH (2.6.25) 2/2] suspend: clean up Kconfig
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: Preliminary patch for ip32 ttyS* device
  • From: Giuseppe Sacco <giuseppe@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: WAIT vs. tickless kernel
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [MIPS] Fix and cleanup the MIPS part of the (ab)use of CLOCK_TICK_RATE.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [MIPS] Fix and cleanup the MIPS part of the (ab)use of CLOCK_TICK_RATE.
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH][au1000] Remove useless EXTRA_CFLAGS
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH] Fix typo in R3000 TRACE_IRQFLAGS code
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: cross-tool for mips target
  • From: David Daney <ddaney@xxxxxxxxxx>
• cross-tool for mips target
  • From: "Reeve Yang" <reeve.yang@xxxxxxxxx>
• Re: Deleting read-only environment variable on Sibyte board.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• RE: Deleting read-only environment variable on Sibyte board.
  • From: "Manoj Ekbote" <manoj.ekbote@xxxxxxxxxxxx>
• Re: [PATCH] Kill __bzero()
  • From: Franck Bui-Huu <vagabon.xyz@xxxxxxxxx>
• [PATCH] Fix typo in R3000 TRACE_IRQFLAGS code
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: WAIT vs. tickless kernel
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: WAIT vs. tickless kernel
  • From: David Daney <ddaney@xxxxxxxxxx>
• Re: WAIT vs. tickless kernel
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH 4/4] tlbex.c: cleanup debug code
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] tlbex.c: cleanup include files
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] tlbex.c: use __cacheline_aligned instead of __tlb_handler_align attribute
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] tlbex.c: Cleanup __init usages.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] Kill __bzero()
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] Kill __bzero()
  • From: Franck Bui-Huu <vagabon.xyz@xxxxxxxxx>
• Re: [PATCH] mm/pg-r4k.c: Dump the generated code
  • From: Franck Bui-Huu <vagabon.xyz@xxxxxxxxx>
• Re: [PATCH] mm/pg-r4k.c: Dump the generated code
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] Kill __bzero()
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] Kill __bzero()
  • From: Franck Bui-Huu <vagabon.xyz@xxxxxxxxx>
• Re: [PATCH] mm/pg-r4k.c: Dump the generated code
  • From: Franck Bui-Huu <vagabon.xyz@xxxxxxxxx>
• Re: [PATCH] mm/pg-r4k.c: Dump the generated code
  • From: Franck Bui-Huu <vagabon.xyz@xxxxxxxxx>
• Re: [RFC] Add __initbss section
  • From: Franck Bui-Huu <vagabon.xyz@xxxxxxxxx>
• Re: 2.6.24-rc1 does not boot on SGI
  • From: Giuseppe Sacco <giuseppe@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] mm/pg-r4k.c: Dump the generated code
  • From: Nigel Stephens <nigel@xxxxxxxx>
• Re: Donation of an Indigo 2 R4K@250
  • From: Martin Michlmayr <tbm@xxxxxxxxxx>
• Re: 2.6.24-rc1 does not boot on SGI
  • From: Giuseppe Sacco <giuseppe@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Deleting read-only environment variable on Sibyte board.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [RFC] Add __initbss section
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: NPTL support
  • From: Markus Gothe <markus.gothe@xxxxxx>
• Re: [PATCH] Use strchr instead of strstr in mips/fw/arc/cmdline.c
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] iounmap if in vr41xx_pciu_init() pci clock is over 33MHz
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] mm/pg-r4k.c: Dump the generated code
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] Kill __bzero()
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: NPTL support
  • From: veerasena reddy <veerasena_b@xxxxxxxxxxx>
• Re: [PATCH] iounmap if in vr41xx_pciu_init() pci clock is over 33MHz
  • From: Yoichi Yuasa <yoichi_yuasa@xxxxxxxxxxxxxx>
• Re: [PATCH] mm/pg-r4k.c: Dump the generated code
  • From: Franck Bui-Huu <vagabon.xyz@xxxxxxxxx>
• [PATCH] Kill __bzero() [take #2]
  • From: Franck Bui-Huu <fbuihuu@xxxxxxxxx>
• Re: [PATCH] Kill __bzero()
  • From: Franck Bui-Huu <vagabon.xyz@xxxxxxxxx>
• Re: Get stuck in wake_up_process(rq->migration_thread);
  • From: "Kevin D. Kissell" <KevinK@xxxxxxxx>
• Re: [PATCH] mm/pg-r4k.c: Dump the generated code
  • From: Thiemo Seufer <ths@xxxxxxxxxxxx>
• Re: [PATCH] Kill __bzero()
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• [PATCH] iounmap if in vr41xx_pciu_init() pci clock is over 33MHz
  • From: Roel Kluin <12o3l@xxxxxxxxxx>
• Get stuck in wake_up_process(rq->migration_thread);
  • From: <KokHow.Teh@xxxxxxxxxxxx>
• Re: [PATCH] JAZZ: disable PIT; cleanup R4030 clockevent
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• "Bad eraseblock"-problem with au1550nd-NAND-driver after kernel update to 2.6.23.1
  • From: "Thorsten Schulz" <stehbrettsegeln@xxxxxx>
• Re: [RFC] Add __initbss section
  • From: Franck Bui-Huu <vagabon.xyz@xxxxxxxxx>
• Re: [PATCH] mm/pg-r4k.c: Dump the generated code
  • From: Franck Bui-Huu <vagabon.xyz@xxxxxxxxx>
• [PATCH] Kill __bzero()
  • From: Franck Bui-Huu <fbuihuu@xxxxxxxxx>
• Re: [PATCH] JAZZ: disable PIT; cleanup R4030 clockevent
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] JAZZ: disable PIT; cleanup R4030 clockevent
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• [PATCH] Use strchr instead of strstr in mips/fw/arc/cmdline.c
  • From: Roel Kluin <12o3l@xxxxxxxxxx>
• First implementation is done. (software suspend on MIPS)
  • From: "Hyon Lim" <alex@xxxxxxxxxxx>
• Re: WAIT vs. tickless kernel
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: Oops with kernel 2.6.8
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [IDE] Fix build bug
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: NPTL support
  • From: Markus Gothe <markus.gothe@xxxxxx>
• Re: [PATCH] JAZZ: disable PIT; cleanup R4030 clockevent
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] JAZZ: disable PIT; cleanup R4030 clockevent
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• Re: [PATCH] Put cast inside macro instead of all the callers
  • From: Ulrich Eckhardt <eckhardt@xxxxxxxxxxxxxx>
• Oops with kernel 2.6.8
  • From: "kalyan tejaswi" <kalyanatejaswi@xxxxxxxxx>
• NPTL support
  • From: veerasena reddy <veerasena_b@xxxxxxxxxxx>
• Re: [IDE] Fix build bug
  • From: Denys Vlasenko <vda.linux@xxxxxxxxxxxxxx>
• Re: [PATCH] Put cast inside macro instead of all the callers
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] Put cast inside macro instead of all the callers
  • From: Andrew Sharp <andy.sharp@xxxxxxxxxx>
• Re: [PATCH] Put cast inside macro instead of all the callers
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [SPAM] Re: MIPS assembly directives in GCC
  • From: Markus Gothe <markus.gothe@xxxxxx>
• Re: [PATCH] Put cast inside macro instead of all the callers
  • From: Ulrich Eckhardt <eckhardt@xxxxxxxxxxxxxx>
• Re: [PATCH] JAZZ: disable PIT; cleanup R4030 clockevent
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] SNI: register a02r clockevent; don't use PIT timer
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] JAZZ: disable PIT; cleanup R4030 clockevent
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: implementation of software suspend on MIPS. (system log)
  • From: "J. Scott Kasten" <jscottkasten@xxxxxxxxx>
• Re: implementation of software suspend on MIPS. (system log)
  • From: "Hyon Lim" <alex@xxxxxxxxxxx>
• Re: MIPS assembly directives in GCC
  • From: Thiemo Seufer <ths@xxxxxxxxxxxx>
• Re: implementation of software suspend on MIPS. (system log)
  • From: "J. Scott Kasten" <jscottkasten@xxxxxxxxx>
• Re: [PATCH][MIPS] fix Cobalt IRQ comment
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH][MIPS] clean up au1xxx_irqmap.c include files
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH][MIPS] bcm47xx: remove unneeded clear_c0_status()
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH][MIPS] fix Cobalt IRQ comment
  • From: Yoichi Yuasa <yoichi_yuasa@xxxxxxxxxxxxxx>
• [PATCH] JAZZ: disable PIT; cleanup R4030 clockevent
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• MIPS assembly directives in GCC
  • From: "Hyon Lim" <alex@xxxxxxxxxxx>
• [PATCH][MIPS] clean up au1xxx_irqmap.c include files
  • From: Yoichi Yuasa <yoichi_yuasa@xxxxxxxxxxxxxx>
• [PATCH][MIPS] bcm47xx: remove unneeded clear_c0_status()
  • From: Yoichi Yuasa <yoichi_yuasa@xxxxxxxxxxxxxx>
• [PATCH] SNI: register a02r clockevent; don't use PIT timer
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• Re: implementation of software suspend on MIPS. (system log)
  • From: "Hyon Lim" <alex@xxxxxxxxxxx>
• Re: implementation of software suspend on MIPS. (system log)
  • From: "J. Scott Kasten" <jscottkasten@xxxxxxxxx>
• Re: implementation of software suspend on MIPS. (system log)
  • From: "Hyon Lim" <alex@xxxxxxxxxxx>
• [PATCH] Put cast inside macro instead of all the callers
  • From: Andrew Sharp <andy.sharp@xxxxxxxxxx>
• RE: implementation of software suspend on MIPS. (system log)
  • From: "Uhler, Mike" <uhler@xxxxxxxx>
• Re: implementation of software suspend on MIPS. (system log)
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: implementation of software suspend on MIPS. (system log)
  • From: "Hyon Lim" <alex@xxxxxxxxxxx>
• Re: implementation of software suspend on MIPS.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: WAIT vs. tickless kernel
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] Fix SWARM build failure
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: WAIT vs. tickless kernel
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• [PATCH] Fix SWARM build failure
  • From: Thiemo Seufer <ths@xxxxxxxxxxxx>
• Re: WAIT vs. tickless kernel
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• WAIT vs. tickless kernel
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: Preliminary patch for ip32 ttyS* device
  • From: Giuseppe Sacco <giuseppe@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] More time cleanup
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: Preliminary patch for ip32 ttyS* device
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: porting KGDB onto MIPS24K processor running linux-2.6.18.8
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: Unknown Synbol:__make_dp
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Unknown Synbol:__make_dp
  • From: kaka <share.kt@xxxxxxxxx>
• Re: Unknown Synbol:__gp_disp
  • From: sathesh babu <sathesh_edara2003@xxxxxxxxxxx>
• porting KGDB onto MIPS24K processor running linux-2.6.18.8
  • From: veerasena reddy <veerasena_b@xxxxxxxxxxx>
• Preliminary patch for ip32 ttyS* device
  • From: Giuseppe Sacco <giuseppe@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [IDE] Fix build bug
  • From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
• Re: implementation of software suspend on MIPS.
  • From: "Hyon Lim" <alex@xxxxxxxxxxx>
• RE: implementation of software suspend on MIPS.
  • From: "Uhler, Mike" <uhler@xxxxxxxx>
• implementation of software suspend on MIPS. (system log)
  • From: "Hyon Lim" <alex@xxxxxxxxxxx>
• implementation of software suspend on MIPS.
  • From: "Hyon Lim" <alex@xxxxxxxxxxx>
• [PATCH] More time cleanup
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: 2.4.24-rc1 does not boot on SGI
  • From: "J. Scott Kasten" <jscottkasten@xxxxxxxxx>
• Re: 2.4.24-rc1 does not boot on SGI
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [IDE] Fix build bug
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: About the changes in co_timer_ack() function of time.c.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: 2.4.24-rc1 does not boot on SGI
  • From: Giuseppe Sacco <giuseppe@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [IDE] Fix build bug
  • From: Denys Vlasenko <vda.linux@xxxxxxxxxxxxxx>
• Re: 2.4.24-rc1 does not boot on SGI
  • From: "J. Scott Kasten" <jscottkasten@xxxxxxxxx>
• Re: 2.4.24-rc1 does not boot on SGI
  • From: Giuseppe Sacco <giuseppe@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Unknown Synbol:__gp_disp
  • From: kaka <share.kt@xxxxxxxxx>
• Re: 2.4.24-rc1 does not boot on SGI
  • From: Martin Michlmayr <tbm@xxxxxxxxxx>
• Re: 2.4.24-rc1 does not boot on SGI
  • From: Martin Michlmayr <tbm@xxxxxxxxxx>
• Unknown Synbol:__gp_disp
  • From: kaka <share.kt@xxxxxxxxx>
• Re: 2.4.24-rc1 does not boot on SGI
  • From: Giuseppe Sacco <giuseppe@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: 2.4.24-rc1 does not boot on SGI
  • From: Martin Michlmayr <tbm@xxxxxxxxxx>
• Re: [PATCH] IP22: Disable EARLY PRINTK, because it breaks serial console
  • From: Martin Michlmayr <tbm@xxxxxxxxxx>
• Re: Question related to Linux Kernel and MIPS
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] fix post-fence error
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH] sb1250-swarm_defconfig: Enable GenBus IDE
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] fix post-fence error
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] vmlinux.ld.S: correctly indent .data section
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] c-r3k: Implement flush_cache_range()
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] store sign-extend register values for PTRACE_GETREGS
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] cleanup tx39/tx49 setup code
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH][MIPS] remove unused mips_machtype
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] [MTX1 try 2] Register platform devices
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Add len and addr validation for MAP_FIXED mappings.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] fix post-fence error
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH] serial: fix au1xxx UART0 irq setup
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH][au1000] Remove useless EXTRA_CFLAGS
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: 2.6.24-rc1 does not boot on SGI [was: Re: 2.4.24-rc1 does not boot on SGI]
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] fix post-fence error
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] Add __cpuinit for some cevt-r4k functions
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] Add __cpuinit for some cevt-r4k functions
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: Fix (workaround?) for BCM Bigsur
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>