SNI PCIT CPLUS: workaround for messed up irq wiring for onboard PCI bus 1
Signed-off-by: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
---
diff --git a/arch/mips/pci/fixup-sni.c b/arch/mips/pci/fixup-sni.c
index a45bedd..5c8a79b 100644
--- a/arch/mips/pci/fixup-sni.c
+++ b/arch/mips/pci/fixup-sni.c
@@ -113,6 +113,16 @@ static char irq_tab_pcit[13][5] __initdata = {
{ 0, INTA, INTB, INTC, INTD }, /* Slot 5 */
};
+static char irq_tab_pcit_cplus[13][5] __initdata = {
+ /* INTA INTB INTC INTD */
+ { 0, 0, 0, 0, 0 }, /* HOST bridge */
+ { 0, INTB, INTC, INTD, INTA }, /* PCI Slot 9 */
+ { 0, 0, 0, 0, 0 }, /* PCI-EISA */
+ { 0, 0, 0, 0, 0 }, /* Unused */
+ { 0, INTA, INTB, INTC, INTD }, /* PCI-PCI bridge */
+ { 0, INTB, INTC, INTD, INTA }, /* fixup */
+};
+
static inline int is_rm300_revd(void)
{
unsigned char csmsr = *(volatile unsigned char *)PCIMT_CSMSR;
@@ -123,8 +133,19 @@ static inline int is_rm300_revd(void)
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
switch (sni_brd_type) {
- case SNI_BRD_PCI_TOWER:
case SNI_BRD_PCI_TOWER_CPLUS:
+ if (slot == 4) {
+ /*
+ * SNI messed up interrupt wiring for onboard
+ * PCI bus 1; we need to fix this up here
+ */
+ while (dev && dev->bus->number != 1)
+ dev = dev->bus->self;
+ if (dev && dev->devfn >= PCI_DEVFN(4, 0))
+ slot = 5;
+ }
+ return irq_tab_pcit_cplus[slot][pin];
+ case SNI_BRD_PCI_TOWER:
return irq_tab_pcit[slot][pin];
case SNI_BRD_PCI_MTOWER:
--
Crap can work. Given enough thrust pigs will fly, but it's not necessary a
good idea. [ RFC1925, 2.3 ]
