Hi all,
I am using Malta-4Kc with kernel 2.6.8(from linux-mips.org) compiled with gcc 3.4.4.
I can not boot over NFS.
The console log is attached.
Any hints are greatly appreciated.
Regards
Kalyan
set baseboardserial (RO) 0000000554 bootfile (R/W) vmlinux.srec bootprot (R/W) tftp bootserport (R/W) tty0 bootserver (R/W) 10.1.1.58 cpuconfig (R/W) ethaddr (RO) 00.d0.a0.00.03.22 file (USER) vmlinux.srec-WUSAGI-WIPIP-ATM-EV6 gateway (R/W) 10.1.1.58 gdb (USER) gdbwait gdb8250=0 38400 ip (USER) 10.1.1.100:10.1.1.58:10.1.1.58:255.0.0.0:malta:eth0:off ip_new (USER) 10.1.1.100:10.1.1.57:10.1.1.57:255.0.0.0:malta:eth0:off ip_new1 (USER) 10.1.1.100:10.1.1.58:10.1.1.58:255.0.0.0:malta:eth0:off ip_old (USER) 20.1.1.100:20.1.1.58:20.1.1.58:255.0.0.0:malta:eth0:off ipaddr (R/W) 10.1.1.100 memsize (RO) 0x04000000 modetty0 (R/W) 38400,n,8,1,hw modetty1 (R/W) 38400,n,8,1,hw newroot (USER) /root/kishore/lxdb26 newroot-temp (USER) /home/jeetendr/root_filesystem-1.3-4k newroot1 (USER) /home/jeetendr/root4K Press any key (Ctrl-C to break, Enter to singlestep) newroot2 (USER) /root/kalyan/root_filesystem Press any key (Ctrl-C to break, Enter to singlestep) newroot3 (USER) /root/kishore/root_filesystem-4K Press any key (Ctrl-C to break, Enter to singlestep) newroot4 (USER) /root/kishore/lxdb-1-2-lfs Press any key (Ctrl-C to break, Enter to singlestep) nfsroot (USER) /root/kishore/lxdb-1-2-user-lfs Press any key (Ctrl-C to break, Enter to singlestep) prompt (R/W) YAMON-4K Press any key (Ctrl-C to break, Enter to singlestep) rootpath (USER) /root/kishore/r1-alpha-rootfs Press any key (Ctrl-C to break, Enter to singlestep) server (USER) 10.1.1.58 Press any key (Ctrl-C to break, Enter to singlestep) start (R/W) load; go . ip=$ip root=/dev/nfs nfsroot=$newroot panic=1 Press any key (Ctrl-C to break, Enter to singlestep) start_old (USER) load; go . ip=$ip root=/dev/nfs nfsroot=$rootpath Press any key (Ctrl-C to break, Enter to singlestep) subnetmask (R/W) 255.255.255.0 Press any key (Ctrl-C to break, Enter to singlestep) yamonrev (RO) 02.02 Press any key (Ctrl-C to break, Enter to singlestep) YAMON-4K> YAMON-4K> load; go . ip=$ip root=/dev/nfs nfsroot=$newroot-temp About to load tftp://10.1.1.58/vmlinux.srec Press Ctrl-C to break ........................................ ........................................ ........................................ ........................................ ........................................ ........................................ .................................... Start = 0x8030d018, range = (0x80100000,0x80329085), format = SREC LINUX started... Config serial console: console=ttyS0,38400n8r Linux version 2.6.8 (kalyan@lxdb02) (gcc version 3.4.4 20050119 (MIPS SDE)) #9 Fri Nov 2 09:26:32 IST 2007 CPU revision is: 00018005 Determined physical RAM map: memory: 00001000 @ 00000000 (reserved) memory: 000ef000 @ 00001000 (ROM data) memory: 00251000 @ 000f0000 (reserved) memory: 03cbf000 @ 00341000 (usable) Built 1 zonelists Kernel command line: ip=10.1.1.100:10.1.1.58:10.1.1.58:255.0.0.0:malta:eth0:off root=/dev/nfs nfsroot=/home/jeetendr/root_filesystem-1.3-4k console=ttyS0,38400n8r Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes. Primary data cache 16kB 4-way, linesize 16 bytes. PID hash table entries: 512 (order 9: 4096 bytes) CPU frequency 125.01 MHz Using 62.506 MHz high precision timer. Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 61488k/62204k available (1619k kernel code, 632k reserved, 476k data, 116k init, 0k highmem) Calibrating delay loop... 123.39 BogoMIPS Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Checking for 'wait' instruction... available. CPU 0 Unable to handle kernel paging request at virtual address 00000014, epc == 80172128, ra == 80172130 Oops in arch/mips/mm/fault.c::do_page_fault, line 167[#1]: Cpu 0 $ 0 : 00000000 1000fc00 00000000 802c2000 $ 4 : 802c2000 83fc186c 00000000 80163d80 $ 8 : 00000008 801dae28 000008ac 00000000 $12 : 80330000 00000000 8032c257 0000000a $16 : 00000000 83fc1900 83fc186c ffffffe9 $20 : 00000000 00000000 80330000 00000000 $24 : 00000000 8032c623 $28 : 802be000 802bfe48 8009e370 80172130 Hi : 00000000 Lo : 000008ac epc : 80172128 do_pipe+0x58/0x320 Not tainted ra : 80172130 do_pipe+0x60/0x320 Status: 1000fc03 KERNEL EXL IE Cause : 90800008 BadVA : 83fc1900 PrId : 00018005 Modules linked in: Process swapper (pid: 0, threadinfo=802be000, task=802c2000) Stack : 80330000 00000000 8032c257 0000000a 00418937 000026b5 80334254 00418937 00000060 802c0000 8032cb6f 00000060 00000000 8032c623 1000fc03 b22cc700 00000000 8010045c 00800b00 00000000 00000000 00000000 00000000 00000000 8009e370 801072fc 802bfec0 83fff340 802cb3cc 00000501 0000000c 00000008 8010b3e8 802c0000 00800b00 00000000 802bff80 0000001d 802c0000 802c0000 ... Call Trace: [<8010045c>] init+0x0/0x254 [<801072fc>] sys_pipe+0x24/0x48 [<8010b3e8>] stack_done+0x24/0x40 [<801283c8>] release_console_sem+0x120/0x314 [<801284d0>] release_console_sem+0x228/0x314 [<8010045c>] init+0x0/0x254 [<8010041c>] rest_init+0x1c/0x28 [<8010548c>] kernel_thread+0x38/0x7c [<8010041c>] rest_init+0x1c/0x28 [<8030d81c>] start_kernel+0x1b0/0x1d8 [<8030d814>] start_kernel+0x1a8/0x1d8 [<8030d24c>] unknown_bootoption+0x0/0x280 [<8030d08c>] nosmp+0x0/0x10 Code: 00409021 3c168033 8ec23050 <0c05ffb0> 8c440014 1040009b 00408021 0c05c801 00402021 Kernel panic: Attempted to kill the idle task! In idle task - not syncing
