Hi Ricardo, On Tue, Dec 11, 2007 at 01:18:00PM -0400, Ricardo Mendoza wrote: > Giuseppe Sacco wrote: > > On Tue, Dec 11, 2007 at 09:26:42AM -0400, Ricardo Mendoza wrote: > >> Giuseppe Sacco wrote: > >> > >>> I just checked that my repository is up to date, so my problem is still > >>> there (thus I don't know if it is the same problem you fixed). > >>> > >>> BTW, what was the problem you fixed? I would like to have a look to it, > >>> to better understand what's going on there. > >> Well I just updated to see if anything had broken in the past few days, > >> but I don't seem to be hitting that error of yours. Could you send your > >> config to see if I can reproduce it? > > > > Yes, sure: http://eppesuigoccas.homedns.org/~giuseppe/debian/config-2.6.24-rc4-ip32.bz2 > > but please note that the problem is present in every kernel since 2.6.24-rc1 > > > > my boot stanza in arcboot is: > > > > label=test > > image=/boot/vmlinux-2.6.24-rc4-gs1 > > append="root=/dev/sda1 ro video=gbefb:1024x768-16@60 debug initcall_debug console=tty0 console=ttyS1,115200" > > Ran it without problems, can't get into much detail right now but I the > problem you are seeing is more than likely caused by your other patch to > serial_core.c. I made a few run, recompiled everything from scratch, without my patch, but I always had the system loop on IRQ #13 while booting. Do you test on ip32? SGI O2 R5000@200? I would like to know any difference between our test environments. Thanks, Gisueppe
