Re: Toshiba JMR 3927 working setup?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 04 Jan 2008 13:40:46 -0500, Gregor Waltz <gregor.waltz@xxxxxxxxxxx> wrote:
> sendRRQ vmlinux.bin
> load linux length 0x34408a
> Checking CRC on downloaded RAM image
>  /
> CRC Check passed
> Image Started At Address 0x80020000.
> Image Length = 3424394 (0x34408a).
> Exception! EPC=80056eb4 CAUSE=30000008(TLBL)
> 80056eb4 8ce4000c lw      a0,12(a3)                         # 0xc

Are you loading an ELF binary or a raw binary image?  If your loader
does not handle ELF headers, you should do some trick to start running
your kernel at correct address.

If you were using 2.6.23, CONFIG_BOOT_RAW might help you.

But it seems CONFIG_BOOT_RAW is broken on current git again.  It will
be an another story... :-<

---
Atsushi Nemoto


[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux