Re: [PATCH] SC26XX: New serial driver for SC2681 uarts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 3 Dec 2007 15:53:17 -0800
Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> wrote:

> On Sun,  2 Dec 2007 20:43:46 +0100 (CET)
> Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx> wrote:
> 
> > New serial driver for SC2681/SC2691 uarts. Older SNI RM400 machines
> > are using these chips for onboard serial ports.
> > 
> 
> Little things...
> 
> > --- /dev/null
> > +++ b/drivers/serial/sc26xx.c
> > @@ -0,0 +1,757 @@
> > +/*
> > + * SC268xx.c: Serial driver for Philiphs SC2681/SC2692 devices.
> > + *
> > + * Copyright (C) 2006,2007 Thomas Bogend__rfer
> > (tsbogend@xxxxxxxxxxxxxxxx)
> > + */
> > +
> > +#include <linux/module.h>
> > +#include <linux/kernel.h>
> > +#include <linux/errno.h>
> > +#include <linux/tty.h>
> > +#include <linux/tty_flip.h>
> > +#include <linux/major.h>
> > +#include <linux/circ_buf.h>
> > +#include <linux/serial.h>
> > +#include <linux/sysrq.h>
> > +#include <linux/console.h>
> > +#include <linux/spinlock.h>
> > +#include <linux/slab.h>
> > +#include <linux/delay.h>
> > +#include <linux/init.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/irq.h>
> > +
> > +#if defined(CONFIG_MAGIC_SYSRQ)
> > +#define SUPPORT_SYSRQ
> > +#endif
> > +
> > +#include <linux/serial_core.h>
> > +
> > +#define SC26XX_MAJOR         204
> > +#define SC26XX_MINOR_START   205
> > +#define SC26XX_NR            2

did lanana assign these numbers officially?



[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux