Re: PCI resource unavailable on mips

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello.

Jon Dufresne wrote:

I did a bit more work and investigation on this and it turns out I could
not read the mmio in kernel space because I had not done a
pci_enable_device_bars() on the device. I had never done this on x86 so
I didn't realize it was necessary.

The virtual address 0xc0300000 looks sensible and the physical address
0x24000000 is consistent with what you found in the BAR registers.  So that
all looks reasonable but that only means not obviously wrong.  So next I
wonder what the value of PCI_MMIO_BASE is ...

The PCI_MMIO_BASE is a defined as:

#define PCI_MMIO_BASE            (0x00040000)

This is define in the technical documentation as the offset to access
pci config space from the mmio.

From what mmio? If it's for accessing a config. space why then you're using it as an offset from BAR?

I am using this because I know what the
values should be so it provides a nice sanity check.

Any idea what I might be doing wrong? How can I access this from user
space?

   Your example doesn't make sense to me so far.

Thanks,
Jon

WBR, Sergei


[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux